view libmpdemux/demux_fli.c @ 33701:09bdaa0c82b3

Make vobsub options available in mencoder, though with my test file it seems to not work quite right but stops adding subtitles after some minutes.
author reimar
date Fri, 01 Jul 2011 17:43:40 +0000
parents 8fa2f43cb760
children f3c835ddce85
line wrap: on
line source

/*
 * FLI file parser
 * copyright (c) 2001 Mike Melanson
 *
 * This file is part of MPlayer.
 *
 * MPlayer is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#include "config.h"
#include "mp_msg.h"
#include "help_mp.h"

#include "stream/stream.h"
#include "demuxer.h"
#include "stheader.h"

typedef struct {
  int num_frames;
  int current_frame;
  off_t *filepos;
  unsigned int *frame_size;
} fli_frames_t;

static void demux_seek_fli(demuxer_t *demuxer,float rel_seek_secs,float audio_delay,int flags){
  fli_frames_t *frames = (fli_frames_t *)demuxer->priv;
  sh_video_t *sh_video = demuxer->video->sh;
  int newpos=(flags&SEEK_ABSOLUTE)?0:frames->current_frame;
  if(flags&SEEK_FACTOR){
      // float 0..1
      newpos+=rel_seek_secs*frames->num_frames;
  } else {
      // secs
      newpos+=rel_seek_secs*sh_video->fps;
  }
  if(newpos<0) newpos=0; else
  if(newpos>frames->num_frames) newpos=frames->num_frames;
  frames->current_frame=newpos;
}

// return value:
//     0 = EOF or no stream found
//     1 = successfully read a packet
static int demux_fli_fill_buffer(demuxer_t *demuxer, demux_stream_t *ds){
  fli_frames_t *frames = (fli_frames_t *)demuxer->priv;
  sh_video_t *sh_video = demuxer->video->sh;

  // see if the end has been reached
  if (frames->current_frame >= frames->num_frames)
    return 0;

  // fetch the frame from the file
  // first, position the file properly since ds_read_packet() doesn't
  // seem to do it, even though it takes a file offset as a parameter
  stream_seek(demuxer->stream, frames->filepos[frames->current_frame]);
  ds_read_packet(demuxer->video,
    demuxer->stream,
    frames->frame_size[frames->current_frame],
    frames->current_frame/sh_video->fps,
    frames->filepos[frames->current_frame],
    0 /* what flags? -> demuxer.h (alex) */
  );

  // get the next frame ready
  frames->current_frame++;

  return 1;
}

static demuxer_t* demux_open_fli(demuxer_t* demuxer){
  sh_video_t *sh_video = NULL;
  fli_frames_t *frames = malloc(sizeof(fli_frames_t));
  int frame_number;
  int speed;
  unsigned int frame_size;
  int magic_number;
  unsigned char * header;

  // go back to the beginning
  stream_reset(demuxer->stream);
  stream_seek(demuxer->stream, 0);

  header = calloc(1, sizeof(BITMAPINFOHEADER) + 128);
  stream_read(demuxer->stream, header + sizeof(BITMAPINFOHEADER), 128);
  stream_seek(demuxer->stream, 0);

  demuxer->movi_start = 128;
  demuxer->movi_end = stream_read_dword_le(demuxer->stream);

  magic_number = stream_read_word_le(demuxer->stream);

  if ((magic_number != 0xAF11) && (magic_number != 0xAF12))
  {
    mp_msg(MSGT_DEMUX, MSGL_ERR, "Bad/unknown magic number (%04x)\n",
	magic_number);
    free(header);
    free(frames);
    return NULL;
  }

  // fetch the number of frames
  frames->num_frames = stream_read_word_le(demuxer->stream);
  frames->current_frame = 0;

  // allocate enough entries for the indices
  //   audit: num_frames is 16bit so it is safe against overflow
  frames->filepos = malloc(frames->num_frames * sizeof(off_t));
  frames->frame_size = malloc(frames->num_frames * sizeof(int));

  // create a new video stream header
  sh_video = new_sh_video(demuxer, 0);

  // make sure the demuxer knows about the new video stream header
  // (even though new_sh_video() ought to take care of it)
  demuxer->video->sh = sh_video;

  // make sure that the video demuxer stream header knows about its
  // parent video demuxer stream (this is getting wacky), or else
  // video_read_properties() will choke
  sh_video->ds = demuxer->video;

  // custom fourcc for internal MPlayer use
  sh_video->format = mmioFOURCC('F', 'L', 'I', 'C');

  sh_video->disp_w = stream_read_word_le(demuxer->stream);
  sh_video->disp_h = stream_read_word_le(demuxer->stream);

  // pass extradata to codec
  sh_video->bih = (BITMAPINFOHEADER*)header;
  sh_video->bih->biSize = sizeof(BITMAPINFOHEADER) + 128;
  sh_video->bih->biWidth = sh_video->disp_w;
  sh_video->bih->biHeight = sh_video->disp_h;

  // skip the video depth and flags
  stream_skip(demuxer->stream, 4);

  // get the speed
  speed = stream_read_word_le(demuxer->stream);
  if (speed == 0)
    speed = 1;
  if (magic_number == 0xAF11)
    speed *= 1000/70;
  sh_video->fps = 1000 / speed;
  sh_video->frametime = 1/sh_video->fps;

  // build the frame index
  stream_seek(demuxer->stream, demuxer->movi_start);
  frame_number = 0;
  while ((!stream_eof(demuxer->stream)) && (frame_number < frames->num_frames))
  {
    frames->filepos[frame_number] = stream_tell(demuxer->stream);
    frame_size = stream_read_dword_le(demuxer->stream);
    magic_number = stream_read_word_le(demuxer->stream);
    stream_skip(demuxer->stream, frame_size - 6);

    // if this chunk has the right magic number, index it
    if ((magic_number == 0xF1FA) || (magic_number == 0xF5FA))
    {
      frames->frame_size[frame_number] = frame_size;
      frame_number++;
    }
  }

  // save the actual number of frames indexed
  frames->num_frames = frame_number;

  demuxer->priv = frames;

  return demuxer;
}

static void demux_close_fli(demuxer_t* demuxer) {
  fli_frames_t *frames = demuxer->priv;

  if(!frames)
    return;

  free(frames->filepos);
  free(frames->frame_size);
  free(frames);

}


static int fli_check_file(demuxer_t* demuxer)
{
  int id;

  stream_seek(demuxer->stream, 4);
  id=stream_read_word_le(demuxer->stream);
  // check for the FLI file magic number
  if((id==0xAF11) || (id==0xAF12))
    return DEMUXER_TYPE_FLI;

  return 0;
}


const demuxer_desc_t demuxer_desc_fli = {
  "Autodesk FLIC demuxer",
  "fli",
  "FLI",
  "Mike Melanson",
  "Supports also some extensions",
  DEMUXER_TYPE_FLI,
  0, // unsafe autodetect (short signature)
  fli_check_file,
  demux_fli_fill_buffer,
  demux_open_fli,
  demux_close_fli,
  demux_seek_fli,
  NULL
};