Mercurial > mplayer.hg
view input/input.h @ 34634:0ef7177a063b
Fix linking after FFmpeg merge.
Protocols that are available only when librtmp is present
are no longer disabled in the code, so we have to remove
them in our configure.
author | iive |
---|---|
date | Tue, 14 Feb 2012 16:50:42 +0000 |
parents | f05c75392897 |
children | 2d29160e0957 |
line wrap: on
line source
/* * This file is part of MPlayer. * * MPlayer is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * MPlayer is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with MPlayer; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #ifndef MPLAYER_INPUT_H #define MPLAYER_INPUT_H #include "m_config.h" // All command IDs typedef enum { MP_CMD_SEEK, MP_CMD_AUDIO_DELAY, MP_CMD_QUIT, MP_CMD_PAUSE, MP_CMD_GRAB_FRAMES, // deprecated: was a no-op command for years MP_CMD_PLAY_TREE_STEP, MP_CMD_PLAY_TREE_UP_STEP, MP_CMD_PLAY_ALT_SRC_STEP, MP_CMD_SUB_DELAY, MP_CMD_OSD, MP_CMD_VOLUME, MP_CMD_MIXER_USEMASTER, MP_CMD_CONTRAST, MP_CMD_BRIGHTNESS, MP_CMD_HUE, MP_CMD_SATURATION, MP_CMD_FRAMEDROPPING, MP_CMD_TV_STEP_CHANNEL, MP_CMD_TV_STEP_NORM, MP_CMD_TV_STEP_CHANNEL_LIST, MP_CMD_CAPTURING, MP_CMD_VO_FULLSCREEN, MP_CMD_SUB_POS, MP_CMD_DVDNAV, MP_CMD_SCREENSHOT, MP_CMD_PANSCAN, MP_CMD_MUTE, MP_CMD_LOADFILE, MP_CMD_LOADLIST, MP_CMD_VF_CHANGE_RECTANGLE, MP_CMD_GAMMA, MP_CMD_SUB_VISIBILITY, MP_CMD_VOBSUB_LANG, // deprecated: combined with SUB_SELECT MP_CMD_MENU, MP_CMD_SET_MENU, MP_CMD_GET_TIME_LENGTH, MP_CMD_GET_PERCENT_POS, MP_CMD_SUB_STEP, MP_CMD_TV_SET_CHANNEL, MP_CMD_EDL_LOADFILE, MP_CMD_EDL_MARK, MP_CMD_SUB_ALIGNMENT, MP_CMD_TV_LAST_CHANNEL, MP_CMD_OSD_SHOW_TEXT, MP_CMD_TV_SET_FREQ, MP_CMD_TV_SET_NORM, MP_CMD_TV_SET_BRIGHTNESS, MP_CMD_TV_SET_CONTRAST, MP_CMD_TV_SET_HUE, MP_CMD_TV_SET_SATURATION, MP_CMD_GET_VO_FULLSCREEN, MP_CMD_GET_SUB_VISIBILITY, MP_CMD_SUB_FORCED_ONLY, MP_CMD_VO_ONTOP, MP_CMD_SUB_SELECT, MP_CMD_VO_ROOTWIN, MP_CMD_SWITCH_VSYNC, MP_CMD_SWITCH_RATIO, MP_CMD_FRAME_STEP, MP_CMD_SPEED_INCR, MP_CMD_SPEED_MULT, MP_CMD_SPEED_SET, MP_CMD_RUN, MP_CMD_SUB_LOG, MP_CMD_SWITCH_AUDIO, MP_CMD_GET_TIME_POS, MP_CMD_SUB_LOAD, MP_CMD_SUB_REMOVE, MP_CMD_KEYDOWN_EVENTS, MP_CMD_VO_BORDER, MP_CMD_SET_PROPERTY, MP_CMD_GET_PROPERTY, MP_CMD_OSD_SHOW_PROPERTY_TEXT, MP_CMD_OSD_SHOW_PROGRESSION, MP_CMD_SEEK_CHAPTER, MP_CMD_FILE_FILTER, MP_CMD_GET_FILENAME, MP_CMD_GET_VIDEO_CODEC, MP_CMD_GET_VIDEO_BITRATE, MP_CMD_GET_VIDEO_RESOLUTION, MP_CMD_GET_AUDIO_CODEC, MP_CMD_GET_AUDIO_BITRATE, MP_CMD_GET_AUDIO_SAMPLES, MP_CMD_GET_META_TITLE, MP_CMD_GET_META_ARTIST, MP_CMD_GET_META_ALBUM, MP_CMD_GET_META_YEAR, MP_CMD_GET_META_COMMENT, MP_CMD_GET_META_TRACK, MP_CMD_GET_META_GENRE, MP_CMD_RADIO_STEP_CHANNEL, MP_CMD_RADIO_SET_CHANNEL, MP_CMD_RADIO_SET_FREQ, MP_CMD_SET_MOUSE_POS, MP_CMD_STEP_PROPERTY, MP_CMD_RADIO_STEP_FREQ, MP_CMD_TV_STEP_FREQ, MP_CMD_LOOP, MP_CMD_BALANCE, MP_CMD_SUB_SCALE, MP_CMD_TV_TELETEXT_ADD_DEC, MP_CMD_TV_TELETEXT_GO_LINK, MP_CMD_TV_START_SCAN, MP_CMD_SUB_SOURCE, MP_CMD_SUB_FILE, MP_CMD_SUB_VOB, MP_CMD_SUB_DEMUX, MP_CMD_SWITCH_ANGLE, MP_CMD_ASS_USE_MARGINS, MP_CMD_SWITCH_TITLE, MP_CMD_STOP, MP_CMD_OVERLAY_ADD, MP_CMD_OVERLAY_REMOVE, /// DVDNAV commands MP_CMD_DVDNAV_UP = 1000, MP_CMD_DVDNAV_DOWN, MP_CMD_DVDNAV_LEFT, MP_CMD_DVDNAV_RIGHT, MP_CMD_DVDNAV_MENU, MP_CMD_DVDNAV_SELECT, MP_CMD_DVDNAV_PREVMENU, MP_CMD_DVDNAV_MOUSECLICK, /// DVB commands MP_CMD_DVB_SET_CHANNEL = 5101, /// Console commands MP_CMD_CHELP = 7000, MP_CMD_CEXIT, MP_CMD_CHIDE, /// Audio Filter commands MP_CMD_AF_SWITCH, MP_CMD_AF_ADD, MP_CMD_AF_DEL, MP_CMD_AF_CLR, MP_CMD_AF_CMDLINE, /// GUI command MP_CMD_GUI, } mp_command_type; // The arg types #define MP_CMD_ARG_INT 0 #define MP_CMD_ARG_FLOAT 1 #define MP_CMD_ARG_STRING 2 #define MP_CMD_ARG_VOID 3 #ifndef MP_CMD_MAX_ARGS #define MP_CMD_MAX_ARGS 10 #endif // Error codes for the drivers // An error occurred but we can continue #define MP_INPUT_ERROR -1 // A fatal error occurred, this driver should be removed #define MP_INPUT_DEAD -2 // No input was available #define MP_INPUT_NOTHING -3 //! Input will be available if you try again #define MP_INPUT_RETRY -4 // For the key's drivers, if possible you can send key up and key down // events. Key up is the default, to send a key down you must use the // OR operator between the key code and MP_KEY_DOWN. #define MP_KEY_DOWN (1<<29) // Use this when the key shouldn't be auto-repeated (like mouse buttons) #define MP_NO_REPEAT_KEY (1<<28) // Special value to mark all keys as "up" #define MP_KEY_RELEASE_ALL (1<<27) #ifndef MP_MAX_KEY_DOWN #define MP_MAX_KEY_DOWN 32 #endif typedef union mp_cmd_arg_value { int i; float f; char* s; void* v; } mp_cmd_arg_value_t; typedef struct mp_cmd_arg { int type; mp_cmd_arg_value_t v; } mp_cmd_arg_t; typedef struct mp_cmd { int id; char* name; int nargs; mp_cmd_arg_t args[MP_CMD_MAX_ARGS]; int pausing; } mp_cmd_t; typedef struct mp_cmd_bind { int input[MP_MAX_KEY_DOWN+1]; char* cmd; } mp_cmd_bind_t; typedef struct mp_key_name { int key; char* name; } mp_key_name_t; // These typedefs are for the drivers. They are the functions used to retrieve // the next key code or command. // These functions should return the key code or one of the error codes typedef int (*mp_key_func_t)(int fd); // These functions should act like read but they must use our error code (if needed ;-) typedef int (*mp_cmd_func_t)(int fd,char* dest,int size); // These are used to close the driver typedef void (*mp_close_func_t)(int fd); // Set this to grab all incoming key codes extern int (*mp_input_key_cb)(int code); // Should return 1 if the command was processed typedef int (*mp_input_cmd_filter)(mp_cmd_t* cmd, int paused, void* ctx); // This function adds a new key driver. // The first arg is a file descriptor (use a negative value if you don't use any fd) // The second arg tells if we use select on the fd to know if something is available. // The third arg is optional. If null a default function wich reads an int from the // fd will be used. // The last arg can be NULL if nothing is needed to close the driver. The close // function can be used int mp_input_add_cmd_fd(int fd, int select, mp_cmd_func_t read_func, mp_close_func_t close_func); // This removes a cmd driver, you usually don't need to use it. void mp_input_rm_cmd_fd(int fd); // The args are the same as for the key's drivers. If you don't use any valid fd you MUST // give a read_func. int mp_input_add_key_fd(int fd, int select, mp_key_func_t read_func, mp_close_func_t close_func); // As for the cmd one you usually don't need this function. void mp_input_rm_key_fd(int fd); int mp_input_add_event_fd(int fd, void (*read_func)(void)); void mp_input_rm_event_fd(int fd); /// Get input key from its name. int mp_input_get_key_from_name(const char *name); // This function can be used to put a command in the system again. It's used by libmpdemux // when it performs a blocking operation to resend the command it received to the main // loop. int mp_input_queue_cmd(mp_cmd_t* cmd); // This function retrieves the next available command waiting no more than time msec. // If pause is true, the next input will always return a pause command. mp_cmd_t* mp_input_get_cmd(int time, int paused, int peek_only); mp_cmd_t* mp_input_parse_cmd(char* str); /** * Parse and queue commands separated by '\n'. * @return count of commands new queued. */ int mp_input_parse_and_queue_cmds(const char *str); /// These filters allow you to process the command before MPlayer. /// If a filter returns a true value mp_input_get_cmd will return NULL. void mp_input_add_cmd_filter(mp_input_cmd_filter, void* ctx); // After getting a command from mp_input_get_cmd you need to free it using this // function void mp_cmd_free(mp_cmd_t* cmd); // This creates a copy of a command (used by the auto repeat stuff). mp_cmd_t* mp_cmd_clone(mp_cmd_t* cmd); // Set current input section void mp_input_set_section(char *name); // Get current input section char* mp_input_get_section(void); // When you create a new driver you should add it in these 2 functions. void mp_input_init(void); void mp_input_uninit(void); void mp_input_register_options(m_config_t* cfg); // Interruptible usleep: (used by libmpdemux) int mp_input_check_interrupt(int time); extern int async_quit_request; #endif /* MPLAYER_INPUT_H */