Mercurial > mplayer.hg
view drivers/mga_vid.c @ 34114:113156bc1137
Ensure that filename related config will always be loaded.
Currently, filename related config will only be loaded if MPlayer knows
the filename when it gets called, which isn't the case if either MPlayer
is called in slave mode or the GUI is called without file argument. In
either case, the file to be played is known only later.
If filename related config hasn't yet been read, do it after leaving
the idle mode loop.
| author | ib |
|---|---|
| date | Sat, 15 Oct 2011 11:07:29 +0000 |
| parents | 0ad2da052b2e |
| children |
line wrap: on
line source
/* * Matrox MGA G200/G400 YUV Video Interface module Version 0.1.0 * BES == Back End Scaler * * Copyright (C) 1999 Aaron Holtzman * * Module skeleton based on gutted agpgart module by * Jeff Hartmann <slicer@ionet.net> * YUY2 support (see config.format) added by A'rpi/ESP-team * double buffering added by A'rpi/ESP-team * brightness/contrast introduced by eyck * multiple card support by Attila Kinali <attila@kinali.ch> * * This file is part of mga_vid. * * mga_vid is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * mga_vid is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with mga_vid; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ //It's entirely possible this major conflicts with something else //use the 'major' parameter to override the default major number (178) /* mknod /dev/mga_vid c 178 0 */ //#define CRTC2 // Set this value, if autodetection fails! (video ram size in megabytes) // #define MGA_MEMORY_SIZE 16 //#define MGA_ALLOW_IRQ #define MGA_VSYNC_POS 2 #include <linux/config.h> #include <linux/version.h> #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> #include <linux/string.h> #include <linux/errno.h> #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10) #include <linux/malloc.h> #else #include <linux/slab.h> #endif #include <linux/pci.h> #include <linux/ioport.h> #include <linux/init.h> #include "mga_vid.h" #ifdef CONFIG_MTRR #include <asm/mtrr.h> #endif #ifdef CONFIG_DEVFS_FS #include <linux/devfs_fs_kernel.h> #endif #include <asm/uaccess.h> #include <asm/system.h> #include <asm/io.h> #define TRUE 1 #define FALSE 0 #define DEFAULT_MGA_VID_MAJOR 178 #ifndef PCI_DEVICE_ID_MATROX_G200_PCI #define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520 #endif #ifndef PCI_DEVICE_ID_MATROX_G200_AGP #define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521 #endif #ifndef PCI_DEVICE_ID_MATROX_G400 #define PCI_DEVICE_ID_MATROX_G400 0x0525 #endif #ifndef PCI_DEVICE_ID_MATROX_G550 #define PCI_DEVICE_ID_MATROX_G550 0x2527 #endif #ifndef PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB #define PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB 0x2159 #endif #ifndef PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM #define PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM 0x19d8 #endif #ifndef PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM #define PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM 0x0328 #endif MODULE_AUTHOR("Aaron Holtzman <aholtzma@engr.uvic.ca>"); #ifdef MODULE_LICENSE MODULE_LICENSE("GPL"); #endif #define PARAM_BRIGHTNESS "brightness=" #define PARAM_CONTRAST "contrast=" #define PARAM_BLACKIE "blackie=" // set PARAM_BUFF_SIZE to just below 4k because some kernel versions // store additional information in the memory page which leads to // the allocation of an additional page if exactly 4k is used #define PARAM_BUFF_SIZE 4000 #ifndef min #define min(x,y) (((x)<(y))?(x):(y)) #endif #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) #include <linux/ctype.h> static unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base) { unsigned long result = 0,value; if (!base) { base = 10; if (*cp == '0') { base = 8; cp++; if ((*cp == 'x') && isxdigit(cp[1])) { cp++; base = 16; } } } while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp) ? toupper(*cp) : *cp)-'A'+10) < base) { result = result*base + value; cp++; } if (endp) *endp = (char *)cp; return result; } static long simple_strtol(const char *cp,char **endp,unsigned int base) { if(*cp=='-') return -simple_strtoul(cp+1,endp,base); return simple_strtoul(cp,endp,base); } #endif typedef struct bes_registers_s { //BES Control uint32_t besctl; //BES Global control uint32_t besglobctl; //Luma control (brightness and contrast) uint32_t beslumactl; //Line pitch uint32_t bespitch; //Buffer A-1 Chroma 3 plane org uint32_t besa1c3org; //Buffer A-1 Chroma org uint32_t besa1corg; //Buffer A-1 Luma org uint32_t besa1org; //Buffer A-2 Chroma 3 plane org uint32_t besa2c3org; //Buffer A-2 Chroma org uint32_t besa2corg; //Buffer A-2 Luma org uint32_t besa2org; //Buffer B-1 Chroma 3 plane org uint32_t besb1c3org; //Buffer B-1 Chroma org uint32_t besb1corg; //Buffer B-1 Luma org uint32_t besb1org; //Buffer B-2 Chroma 3 plane org uint32_t besb2c3org; //Buffer B-2 Chroma org uint32_t besb2corg; //Buffer B-2 Luma org uint32_t besb2org; //BES Horizontal coord uint32_t beshcoord; //BES Horizontal inverse scaling [5.14] uint32_t beshiscal; //BES Horizontal source start [10.14] (for scaling) uint32_t beshsrcst; //BES Horizontal source ending [10.14] (for scaling) uint32_t beshsrcend; //BES Horizontal source last uint32_t beshsrclst; //BES Vertical coord uint32_t besvcoord; //BES Vertical inverse scaling [5.14] uint32_t besviscal; //BES Field 1 vertical source last position uint32_t besv1srclst; //BES Field 1 weight start uint32_t besv1wght; //BES Field 2 vertical source last position uint32_t besv2srclst; //BES Field 2 weight start uint32_t besv2wght; //configurable stuff int blackie; } bes_registers_t; #ifdef CRTC2 typedef struct crtc2_registers_s { uint32_t c2ctl; uint32_t c2datactl; uint32_t c2misc; uint32_t c2hparam; uint32_t c2hsync; uint32_t c2offset; uint32_t c2pl2startadd0; uint32_t c2pl2startadd1; uint32_t c2pl3startadd0; uint32_t c2pl3startadd1; uint32_t c2preload; uint32_t c2spicstartadd0; uint32_t c2spicstartadd1; uint32_t c2startadd0; uint32_t c2startadd1; uint32_t c2subpiclut; uint32_t c2vcount; uint32_t c2vparam; uint32_t c2vsync; } crtc2_registers_t; #endif //All register offsets are converted to word aligned offsets (32 bit) //because we want all our register accesses to be 32 bits #define VCOUNT 0x1e20 #define PALWTADD 0x3c00 // Index register for X_DATAREG port #define X_DATAREG 0x3c0a #define XMULCTRL 0x19 #define BPP_8 0x00 #define BPP_15 0x01 #define BPP_16 0x02 #define BPP_24 0x03 #define BPP_32_DIR 0x04 #define BPP_32_PAL 0x07 #define XCOLMSK 0x40 #define X_COLKEY 0x42 #define XKEYOPMODE 0x51 #define XCOLMSK0RED 0x52 #define XCOLMSK0GREEN 0x53 #define XCOLMSK0BLUE 0x54 #define XCOLKEY0RED 0x55 #define XCOLKEY0GREEN 0x56 #define XCOLKEY0BLUE 0x57 #ifdef CRTC2 /*CRTC2 registers*/ #define XMISCCTRL 0x1e #define C2CTL 0x3c10 #define C2DATACTL 0x3c4c #define C2MISC 0x3c44 #define C2HPARAM 0x3c14 #define C2HSYNC 0x3c18 #define C2OFFSET 0x3c40 #define C2PL2STARTADD0 0x3c30 // like BESA1CORG #define C2PL2STARTADD1 0x3c34 // like BESA2CORG #define C2PL3STARTADD0 0x3c38 // like BESA1C3ORG #define C2PL3STARTADD1 0x3c3c // like BESA2C3ORG #define C2PRELOAD 0x3c24 #define C2SPICSTARTADD0 0x3c54 #define C2SPICSTARTADD1 0x3c58 #define C2STARTADD0 0x3c28 // like BESA1ORG #define C2STARTADD1 0x3c2c // like BESA2ORG #define C2SUBPICLUT 0x3c50 #define C2VCOUNT 0x3c48 #define C2VPARAM 0x3c1c #define C2VSYNC 0x3c20 #endif // Backend Scaler registers #define BESCTL 0x3d20 #define BESGLOBCTL 0x3dc0 #define BESLUMACTL 0x3d40 #define BESPITCH 0x3d24 #define BESA1C3ORG 0x3d60 #define BESA1CORG 0x3d10 #define BESA1ORG 0x3d00 #define BESA2C3ORG 0x3d64 #define BESA2CORG 0x3d14 #define BESA2ORG 0x3d04 #define BESB1C3ORG 0x3d68 #define BESB1CORG 0x3d18 #define BESB1ORG 0x3d08 #define BESB2C3ORG 0x3d6C #define BESB2CORG 0x3d1C #define BESB2ORG 0x3d0C #define BESHCOORD 0x3d28 #define BESHISCAL 0x3d30 #define BESHSRCEND 0x3d3C #define BESHSRCLST 0x3d50 #define BESHSRCST 0x3d38 #define BESV1WGHT 0x3d48 #define BESV2WGHT 0x3d4c #define BESV1SRCLST 0x3d54 #define BESV2SRCLST 0x3d58 #define BESVISCAL 0x3d34 #define BESVCOORD 0x3d2c #define BESSTATUS 0x3dc4 #define CRTCX 0x1fd4 #define CRTCD 0x1fd5 #define IEN 0x1e1c #define ICLEAR 0x1e18 #define STATUS 0x1e14 // global devfs handle for /dev/mga_vid #ifdef CONFIG_DEVFS_FS static devfs_handle_t dev_handle = NULL; #endif // card local config typedef struct mga_card_s { // local devfs handle for /dev/mga_vidX #ifdef CONFIG_DEVFS_FS devfs_handle_t dev_handle; #endif uint8_t *param_buff; // buffer for read() uint32_t param_buff_size; uint32_t param_buff_len; bes_registers_t regs; #ifdef CRTC2 crtc2_registers_t cregs; #endif uint32_t vid_in_use; uint32_t is_g400; uint32_t vid_src_ready; uint32_t vid_overlay_on; uint8_t *mmio_base; uint32_t mem_base; int src_base; // YUV buffer position in video memory uint32_t ram_size; // how much megabytes videoram we have uint32_t top_reserved; // reserved space for console font (matroxfb + fastfont) int brightness; // initial brightness int contrast; // initial contrast struct pci_dev *pci_dev; mga_vid_config_t config; int configured; // set to 1 when the card is configured over ioctl int colkey_saved; int colkey_on; unsigned char colkey_color[4]; unsigned char colkey_mask[4]; int irq; // = -1 int next_frame; } mga_card_t; #define MGA_MAX_CARDS 16 // this is used as init value for the parameter arrays // it should have exactly MGA_MAX_CARDS elements #define MGA_MAX_CARDS_INIT_ARRAY {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} static unsigned int mga_cards_num=0; static mga_card_t * mga_cards[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; // module parameters static int major = DEFAULT_MGA_VID_MAJOR; static int mga_ram_size[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; static int mga_brightness[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; static int mga_contrast[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; static int mga_top_reserved[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; MODULE_PARM(mga_ram_size, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i"); MODULE_PARM(mga_top_reserved, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i"); MODULE_PARM(mga_brightness, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i"); MODULE_PARM(mga_contrast, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i"); MODULE_PARM(major, "i"); #ifdef CRTC2 static void crtc2_frame_sel(mga_card_t * card, int frame) { switch(frame) { case 0: card->cregs.c2pl2startadd0=card->regs.besa1corg; card->cregs.c2pl3startadd0=card->regs.besa1c3org; card->cregs.c2startadd0=card->regs.besa1org; break; case 1: card->cregs.c2pl2startadd0=card->regs.besa2corg; card->cregs.c2pl3startadd0=card->regs.besa2c3org; card->cregs.c2startadd0=card->regs.besa2org; break; case 2: card->cregs.c2pl2startadd0=card->regs.besb1corg; card->cregs.c2pl3startadd0=card->regs.besb1c3org; card->cregs.c2startadd0=card->regs.besb1org; break; case 3: card->cregs.c2pl2startadd0=card->regs.besb2corg; card->cregs.c2pl3startadd0=card->regs.besb2c3org; card->cregs.c2startadd0=card->regs.besb2org; break; } writel(card->cregs.c2startadd0, card->mmio_base + C2STARTADD0); writel(card->cregs.c2pl2startadd0, card->mmio_base + C2PL2STARTADD0); writel(card->cregs.c2pl3startadd0, card->mmio_base + C2PL3STARTADD0); } #endif static void mga_vid_frame_sel(mga_card_t * card, int frame) { if ( card->irq != -1 ) { card->next_frame=frame; } else { //we don't need the vcount protection as we're only hitting //one register (and it doesn't seem to be double buffered) card->regs.besctl = (card->regs.besctl & ~0x07000000) + (frame << 25); writel( card->regs.besctl, card->mmio_base + BESCTL ); // writel( card->regs.besglobctl + ((readl(card->mmio_base + VCOUNT)+2)<<16), writel( card->regs.besglobctl + (MGA_VSYNC_POS<<16), card->mmio_base + BESGLOBCTL); #ifdef CRTC2 crtc2_frame_sel(card, frame); #endif } } static void mga_vid_write_regs(mga_card_t * card, int restore) { //Make sure internal registers don't get updated until we're done writel( (readl(card->mmio_base + VCOUNT)-1)<<16, card->mmio_base + BESGLOBCTL); // color or coordinate keying if(restore && card->colkey_saved){ // restore it card->colkey_saved=0; #ifdef MP_DEBUG printk("mga_vid: Restoring colorkey (ON: %d %02X:%02X:%02X)\n", card->colkey_on,card->colkey_color[0],card->colkey_color[1],card->colkey_color[2]); #endif // Set color key registers: writeb( XKEYOPMODE, card->mmio_base + PALWTADD); writeb( card->colkey_on, card->mmio_base + X_DATAREG); writeb( XCOLKEY0RED, card->mmio_base + PALWTADD); writeb( card->colkey_color[0], card->mmio_base + X_DATAREG); writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD); writeb( card->colkey_color[1], card->mmio_base + X_DATAREG); writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD); writeb( card->colkey_color[2], card->mmio_base + X_DATAREG); writeb( X_COLKEY, card->mmio_base + PALWTADD); writeb( card->colkey_color[3], card->mmio_base + X_DATAREG); writeb( XCOLMSK0RED, card->mmio_base + PALWTADD); writeb( card->colkey_mask[0], card->mmio_base + X_DATAREG); writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD); writeb( card->colkey_mask[1], card->mmio_base + X_DATAREG); writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD); writeb( card->colkey_mask[2], card->mmio_base + X_DATAREG); writeb( XCOLMSK, card->mmio_base + PALWTADD); writeb( card->colkey_mask[3], card->mmio_base + X_DATAREG); } else if(!card->colkey_saved){ // save it card->colkey_saved=1; // Get color key registers: writeb( XKEYOPMODE, card->mmio_base + PALWTADD); card->colkey_on=(unsigned char)readb(card->mmio_base + X_DATAREG) & 1; writeb( XCOLKEY0RED, card->mmio_base + PALWTADD); card->colkey_color[0]=(unsigned char)readb(card->mmio_base + X_DATAREG); writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD); card->colkey_color[1]=(unsigned char)readb(card->mmio_base + X_DATAREG); writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD); card->colkey_color[2]=(unsigned char)readb(card->mmio_base + X_DATAREG); writeb( X_COLKEY, card->mmio_base + PALWTADD); card->colkey_color[3]=(unsigned char)readb(card->mmio_base + X_DATAREG); writeb( XCOLMSK0RED, card->mmio_base + PALWTADD); card->colkey_mask[0]=(unsigned char)readb(card->mmio_base + X_DATAREG); writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD); card->colkey_mask[1]=(unsigned char)readb(card->mmio_base + X_DATAREG); writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD); card->colkey_mask[2]=(unsigned char)readb(card->mmio_base + X_DATAREG); writeb( XCOLMSK, card->mmio_base + PALWTADD); card->colkey_mask[3]=(unsigned char)readb(card->mmio_base + X_DATAREG); #ifdef MP_DEBUG printk("mga_vid: Saved colorkey (ON: %d %02X:%02X:%02X)\n", card->colkey_on, card->colkey_color[0], card->colkey_color[1], card->colkey_color[2]); #endif } if(!restore){ writeb( XKEYOPMODE, card->mmio_base + PALWTADD); writeb( card->config.colkey_on, card->mmio_base + X_DATAREG); if ( card->config.colkey_on ) { uint32_t r=0, g=0, b=0; writeb( XMULCTRL, card->mmio_base + PALWTADD); switch (readb (card->mmio_base + X_DATAREG)) { case BPP_8: /* Need to look up the color index, just using color 0 for now. */ break; case BPP_15: r = card->config.colkey_red >> 3; g = card->config.colkey_green >> 3; b = card->config.colkey_blue >> 3; break; case BPP_16: r = card->config.colkey_red >> 3; g = card->config.colkey_green >> 2; b = card->config.colkey_blue >> 3; break; case BPP_24: case BPP_32_DIR: case BPP_32_PAL: r = card->config.colkey_red; g = card->config.colkey_green; b = card->config.colkey_blue; break; } // Disable color keying on alpha channel writeb( XCOLMSK, card->mmio_base + PALWTADD); writeb( 0x00, card->mmio_base + X_DATAREG); writeb( X_COLKEY, card->mmio_base + PALWTADD); writeb( 0x00, card->mmio_base + X_DATAREG); // Set up color key registers writeb( XCOLKEY0RED, card->mmio_base + PALWTADD); writeb( r, card->mmio_base + X_DATAREG); writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD); writeb( g, card->mmio_base + X_DATAREG); writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD); writeb( b, card->mmio_base + X_DATAREG); // Set up color key mask registers writeb( XCOLMSK0RED, card->mmio_base + PALWTADD); writeb( 0xff, card->mmio_base + X_DATAREG); writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD); writeb( 0xff, card->mmio_base + X_DATAREG); writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD); writeb( 0xff, card->mmio_base + X_DATAREG); } } // Backend Scaler writel( card->regs.besctl, card->mmio_base + BESCTL); if(card->is_g400) writel( card->regs.beslumactl, card->mmio_base + BESLUMACTL); writel( card->regs.bespitch, card->mmio_base + BESPITCH); writel( card->regs.besa1org, card->mmio_base + BESA1ORG); writel( card->regs.besa1corg, card->mmio_base + BESA1CORG); writel( card->regs.besa2org, card->mmio_base + BESA2ORG); writel( card->regs.besa2corg, card->mmio_base + BESA2CORG); writel( card->regs.besb1org, card->mmio_base + BESB1ORG); writel( card->regs.besb1corg, card->mmio_base + BESB1CORG); writel( card->regs.besb2org, card->mmio_base + BESB2ORG); writel( card->regs.besb2corg, card->mmio_base + BESB2CORG); if(card->is_g400) { writel( card->regs.besa1c3org, card->mmio_base + BESA1C3ORG); writel( card->regs.besa2c3org, card->mmio_base + BESA2C3ORG); writel( card->regs.besb1c3org, card->mmio_base + BESB1C3ORG); writel( card->regs.besb2c3org, card->mmio_base + BESB2C3ORG); } writel( card->regs.beshcoord, card->mmio_base + BESHCOORD); writel( card->regs.beshiscal, card->mmio_base + BESHISCAL); writel( card->regs.beshsrcst, card->mmio_base + BESHSRCST); writel( card->regs.beshsrcend, card->mmio_base + BESHSRCEND); writel( card->regs.beshsrclst, card->mmio_base + BESHSRCLST); writel( card->regs.besvcoord, card->mmio_base + BESVCOORD); writel( card->regs.besviscal, card->mmio_base + BESVISCAL); writel( card->regs.besv1srclst, card->mmio_base + BESV1SRCLST); writel( card->regs.besv1wght, card->mmio_base + BESV1WGHT); writel( card->regs.besv2srclst, card->mmio_base + BESV2SRCLST); writel( card->regs.besv2wght, card->mmio_base + BESV2WGHT); //update the registers somewhere between 1 and 2 frames from now. writel( card->regs.besglobctl + ((readl(card->mmio_base + VCOUNT)+2)<<16), card->mmio_base + BESGLOBCTL); #if 0 printk(KERN_DEBUG "mga_vid: wrote BES registers\n"); printk(KERN_DEBUG "mga_vid: BESCTL = 0x%08x\n", readl(card->mmio_base + BESCTL)); printk(KERN_DEBUG "mga_vid: BESGLOBCTL = 0x%08x\n", readl(card->mmio_base + BESGLOBCTL)); printk(KERN_DEBUG "mga_vid: BESSTATUS= 0x%08x\n", readl(card->mmio_base + BESSTATUS)); #endif #ifdef CRTC2 // printk("c2ctl:0x%08x c2datactl:0x%08x\n", readl(card->mmio_base + C2CTL), readl(card->mmio_base + C2DATACTL)); // printk("c2misc:0x%08x\n", readl(card->mmio_base + C2MISC)); // printk("c2ctl:0x%08x c2datactl:0x%08x\n", card->cregs.c2ctl, card->cregs.c2datactl); // writel(card->cregs.c2ctl, card->mmio_base + C2CTL); writel(((readl(card->mmio_base + C2CTL) & ~0x03e00000) + (card->cregs.c2ctl & 0x03e00000)), card->mmio_base + C2CTL); writel(((readl(card->mmio_base + C2DATACTL) & ~0x000000ff) + (card->cregs.c2datactl & 0x000000ff)), card->mmio_base + C2DATACTL); // ctrc2 // disable CRTC2 acording to specs // writel(card->cregs.c2ctl & 0xfffffff0, card->mmio_base + C2CTL); // je to treba ??? // writeb((readb(card->mmio_base + XMISCCTRL) & 0x19) | 0xa2, card->mmio_base + XMISCCTRL); // MAFC - mfcsel & vdoutsel // writeb((readb(card->mmio_base + XMISCCTRL) & 0x19) | 0x92, card->mmio_base + XMISCCTRL); // writeb((readb(card->mmio_base + XMISCCTRL) & ~0xe9) + 0xa2, card->mmio_base + XMISCCTRL); // writel(card->cregs.c2datactl, card->mmio_base + C2DATACTL); // writel(card->cregs.c2hparam, card->mmio_base + C2HPARAM); // writel(card->cregs.c2hsync, card->mmio_base + C2HSYNC); // writel(card->cregs.c2vparam, card->mmio_base + C2VPARAM); // writel(card->cregs.c2vsync, card->mmio_base + C2VSYNC); writel(card->cregs.c2misc, card->mmio_base + C2MISC); #ifdef MP_DEBUG printk("c2offset = %d\n",card->cregs.c2offset); #endif writel(card->cregs.c2offset, card->mmio_base + C2OFFSET); writel(card->cregs.c2startadd0, card->mmio_base + C2STARTADD0); // writel(card->cregs.c2startadd1, card->mmio_base + C2STARTADD1); writel(card->cregs.c2pl2startadd0, card->mmio_base + C2PL2STARTADD0); // writel(card->cregs.c2pl2startadd1, card->mmio_base + C2PL2STARTADD1); writel(card->cregs.c2pl3startadd0, card->mmio_base + C2PL3STARTADD0); // writel(card->cregs.c2pl3startadd1, card->mmio_base + C2PL3STARTADD1); writel(card->cregs.c2spicstartadd0, card->mmio_base + C2SPICSTARTADD0); // writel(card->cregs.c2spicstartadd1, card->mmio_base + C2SPICSTARTADD1); // writel(card->cregs.c2subpiclut, card->mmio_base + C2SUBPICLUT); // writel(card->cregs.c2preload, card->mmio_base + C2PRELOAD); // finaly enable everything // writel(card->cregs.c2ctl, card->mmio_base + C2CTL); // printk("c2ctl:0x%08x c2datactl:0x%08x\n",readl(card->mmio_base + C2CTL),readl(card->mmio_base + C2DATACTL)); // printk("c2misc:0x%08x\n", readl(card->mmio_base + C2MISC)); #endif } static int mga_vid_set_config(mga_card_t * card) { int x, y, sw, sh, dw, dh; int besleft, bestop, ifactor, ofsleft, ofstop, baseadrofs, weight, weights; mga_vid_config_t *config = &card->config; int frame_size = card->config.frame_size; #ifdef CRTC2 #define right_margin 0 #define left_margin 18 #define hsync_len 46 #define lower_margin 10 #define vsync_len 4 #define upper_margin 39 unsigned int hdispend = (config->src_width + 31) & ~31; unsigned int hsyncstart = hdispend + (right_margin & ~7); unsigned int hsyncend = hsyncstart + (hsync_len & ~7); unsigned int htotal = hsyncend + (left_margin & ~7); unsigned int vdispend = config->src_height; unsigned int vsyncstart = vdispend + lower_margin; unsigned int vsyncend = vsyncstart + vsync_len; unsigned int vtotal = vsyncend + upper_margin; #endif x = config->x_org; y = config->y_org; sw = config->src_width; sh = config->src_height; dw = config->dest_width; dh = config->dest_height; #ifdef MP_DEBUG printk(KERN_DEBUG "mga_vid: Setting up a %dx%d+%d+%d video window (src %dx%d) format %X\n", dw, dh, x, y, sw, sh, config->format); #endif if(sw<4 || sh<4 || dw<4 || dh<4){ printk(KERN_ERR "mga_vid: Invalid src/dest dimenstions\n"); return -1; } //FIXME check that window is valid and inside desktop //Setup the BES registers for a three plane 4:2:0 video source card->regs.besglobctl = 0; switch(config->format){ case MGA_VID_FORMAT_YV12: case MGA_VID_FORMAT_I420: case MGA_VID_FORMAT_IYUV: card->regs.besctl = 1 // BES enabled + (0<<6) // even start polarity + (1<<10) // x filtering enabled + (1<<11) // y filtering enabled + (1<<16) // chroma upsampling + (1<<17) // 4:2:0 mode + (1<<18); // dither enabled #if 0 if(card->is_g400) { //zoom disabled, zoom filter disabled, 420 3 plane format, proc amp //disabled, rgb mode disabled card->regs.besglobctl = (1<<5); } else { //zoom disabled, zoom filter disabled, Cb samples in 0246, Cr //in 1357, BES register update on besvcnt card->regs.besglobctl = 0; } #endif break; case MGA_VID_FORMAT_YUY2: card->regs.besctl = 1 // BES enabled + (0<<6) // even start polarity + (1<<10) // x filtering enabled + (1<<11) // y filtering enabled + (1<<16) // chroma upsampling + (0<<17) // 4:2:2 mode + (1<<18); // dither enabled card->regs.besglobctl = 0; // YUY2 format selected break; case MGA_VID_FORMAT_UYVY: card->regs.besctl = 1 // BES enabled + (0<<6) // even start polarity + (1<<10) // x filtering enabled + (1<<11) // y filtering enabled + (1<<16) // chroma upsampling + (0<<17) // 4:2:2 mode + (1<<18); // dither enabled card->regs.besglobctl = 1<<6; // UYVY format selected break; default: printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format); return -1; } // setting black&white mode card->regs.besctl|=(card->regs.blackie<<20); //Enable contrast and brightness control card->regs.besglobctl |= (1<<5) + (1<<7); // brightness (-128..127) && contrast (0..255) card->regs.beslumactl = (card->brightness << 16) | ((card->contrast+0x80)&0xFFFF); //Setup destination window boundaries besleft = x > 0 ? x : 0; bestop = y > 0 ? y : 0; card->regs.beshcoord = (besleft<<16) + (x + dw-1); card->regs.besvcoord = (bestop<<16) + (y + dh-1); //Setup source dimensions card->regs.beshsrclst = (sw - 1) << 16; card->regs.bespitch = (sw + 31) & ~31 ; //Setup horizontal scaling ifactor = ((sw-1)<<14)/(dw-1); ofsleft = besleft - x; card->regs.beshiscal = ifactor<<2; card->regs.beshsrcst = (ofsleft*ifactor)<<2; card->regs.beshsrcend = card->regs.beshsrcst + (((dw - ofsleft - 1) * ifactor) << 2); //Setup vertical scaling ifactor = ((sh-1)<<14)/(dh-1); ofstop = bestop - y; card->regs.besviscal = ifactor<<2; baseadrofs = ( (ofstop * card->regs.besviscal) >>16) * card->regs.bespitch; //frame_size = ((sw + 31) & ~31) * sh + (((sw + 31) & ~31) * sh) / 2; card->regs.besa1org = (uint32_t) card->src_base + baseadrofs; card->regs.besa2org = (uint32_t) card->src_base + baseadrofs + 1*frame_size; card->regs.besb1org = (uint32_t) card->src_base + baseadrofs + 2*frame_size; card->regs.besb2org = (uint32_t) card->src_base + baseadrofs + 3*frame_size; if(config->format==MGA_VID_FORMAT_YV12 ||config->format==MGA_VID_FORMAT_IYUV ||config->format==MGA_VID_FORMAT_I420 ){ // planar YUV frames: if (card->is_g400) baseadrofs = ( ( (ofstop * card->regs.besviscal ) / 4 ) >> 16 ) * card->regs.bespitch; else baseadrofs = ( ( ( ofstop * card->regs.besviscal ) / 2 ) >> 16 ) * card->regs.bespitch; if(config->format==MGA_VID_FORMAT_YV12 || !card->is_g400){ card->regs.besa1corg = (uint32_t) card->src_base + baseadrofs + card->regs.bespitch * sh ; card->regs.besa2corg = (uint32_t) card->src_base + baseadrofs + 1*frame_size + card->regs.bespitch * sh; card->regs.besb1corg = (uint32_t) card->src_base + baseadrofs + 2*frame_size + card->regs.bespitch * sh; card->regs.besb2corg = (uint32_t) card->src_base + baseadrofs + 3*frame_size + card->regs.bespitch * sh; card->regs.besa1c3org = card->regs.besa1corg + ( (card->regs.bespitch * sh) / 4); card->regs.besa2c3org = card->regs.besa2corg + ( (card->regs.bespitch * sh) / 4); card->regs.besb1c3org = card->regs.besb1corg + ( (card->regs.bespitch * sh) / 4); card->regs.besb2c3org = card->regs.besb2corg + ( (card->regs.bespitch * sh) / 4); } else { card->regs.besa1c3org = (uint32_t) card->src_base + baseadrofs + card->regs.bespitch * sh ; card->regs.besa2c3org = (uint32_t) card->src_base + baseadrofs + 1*frame_size + card->regs.bespitch * sh; card->regs.besb1c3org = (uint32_t) card->src_base + baseadrofs + 2*frame_size + card->regs.bespitch * sh; card->regs.besb2c3org = (uint32_t) card->src_base + baseadrofs + 3*frame_size + card->regs.bespitch * sh; card->regs.besa1corg = card->regs.besa1c3org + ((card->regs.bespitch * sh) / 4); card->regs.besa2corg = card->regs.besa2c3org + ((card->regs.bespitch * sh) / 4); card->regs.besb1corg = card->regs.besb1c3org + ((card->regs.bespitch * sh) / 4); card->regs.besb2corg = card->regs.besb2c3org + ((card->regs.bespitch * sh) / 4); } } weight = ofstop * (card->regs.besviscal >> 2); weights = weight < 0 ? 1 : 0; card->regs.besv2wght = card->regs.besv1wght = (weights << 16) + ((weight & 0x3FFF) << 2); card->regs.besv2srclst = card->regs.besv1srclst = sh - 1 - (((ofstop * card->regs.besviscal) >> 16) & 0x03FF); #ifdef CRTC2 // pridat hlavni registry - tj. casovani ... switch(config->format){ case MGA_VID_FORMAT_YV12: case MGA_VID_FORMAT_I420: case MGA_VID_FORMAT_IYUV: card->cregs.c2ctl = 1 // CRTC2 enabled + (1<<1) // external clock + (0<<2) // external clock + (1<<3) // pixel clock enable - not needed ??? + (0<<4) // high prioryty req + (1<<5) // high prioryty req + (0<<6) // high prioryty req + (1<<8) // high prioryty req max + (0<<9) // high prioryty req max + (0<<10) // high prioryty req max + (0<<20) // CRTC1 to DAC + (1<<21) // 420 mode + (1<<22) // 420 mode + (1<<23) // 420 mode + (0<<24) // single chroma line for 420 mode - need to be corrected + (0<<25) /*/ interlace mode - need to be corrected*/ + (0<<26) // field legth polariry + (0<<27) // field identification polariry + (1<<28) // VIDRST detection mode + (0<<29) // VIDRST detection mode + (1<<30) // Horizontal counter preload + (1<<31) // Vertical counter preload ; card->cregs.c2datactl = 1 // disable dither - propably not needed, we are already in YUV mode + (1<<1) // Y filter enable + (1<<2) // CbCr filter enable + (0<<3) // subpicture enable (disabled) + (0<<4) // NTSC enable (disabled - PAL) + (0<<5) // C2 static subpicture enable (disabled) + (0<<6) // C2 subpicture offset division (disabled) + (0<<7) // 422 subformat selection ! /* + (0<<8) // 15 bpp high alpha + (0<<9) // 15 bpp high alpha + (0<<10) // 15 bpp high alpha + (0<<11) // 15 bpp high alpha + (0<<12) // 15 bpp high alpha + (0<<13) // 15 bpp high alpha + (0<<14) // 15 bpp high alpha + (0<<15) // 15 bpp high alpha + (0<<16) // 15 bpp low alpha + (0<<17) // 15 bpp low alpha + (0<<18) // 15 bpp low alpha + (0<<19) // 15 bpp low alpha + (0<<20) // 15 bpp low alpha + (0<<21) // 15 bpp low alpha + (0<<22) // 15 bpp low alpha + (0<<23) // 15 bpp low alpha + (0<<24) // static subpicture key + (0<<25) // static subpicture key + (0<<26) // static subpicture key + (0<<27) // static subpicture key + (0<<28) // static subpicture key */ ; break; case MGA_VID_FORMAT_YUY2: card->cregs.c2ctl = 1 // CRTC2 enabled + (1<<1) // external clock + (0<<2) // external clock + (1<<3) // pixel clock enable - not needed ??? + (0<<4) // high prioryty req - acc to spec + (1<<5) // high prioryty req + (0<<6) // high prioryty req // 7 reserved + (1<<8) // high prioryty req max + (0<<9) // high prioryty req max + (0<<10) // high prioryty req max // 11-19 reserved + (0<<20) // CRTC1 to DAC + (1<<21) // 422 mode + (0<<22) // 422 mode + (1<<23) // 422 mode + (0<<24) // single chroma line for 420 mode - need to be corrected + (0<<25) /*/ interlace mode - need to be corrected*/ + (0<<26) // field legth polariry + (0<<27) // field identification polariry + (1<<28) // VIDRST detection mode + (0<<29) // VIDRST detection mode + (1<<30) // Horizontal counter preload + (1<<31) // Vertical counter preload ; card->cregs.c2datactl = 1 // disable dither - propably not needed, we are already in YUV mode + (1<<1) // Y filter enable + (1<<2) // CbCr filter enable + (0<<3) // subpicture enable (disabled) + (0<<4) // NTSC enable (disabled - PAL) + (0<<5) // C2 static subpicture enable (disabled) + (0<<6) // C2 subpicture offset division (disabled) + (0<<7) // 422 subformat selection ! /* + (0<<8) // 15 bpp high alpha + (0<<9) // 15 bpp high alpha + (0<<10) // 15 bpp high alpha + (0<<11) // 15 bpp high alpha + (0<<12) // 15 bpp high alpha + (0<<13) // 15 bpp high alpha + (0<<14) // 15 bpp high alpha + (0<<15) // 15 bpp high alpha + (0<<16) // 15 bpp low alpha + (0<<17) // 15 bpp low alpha + (0<<18) // 15 bpp low alpha + (0<<19) // 15 bpp low alpha + (0<<20) // 15 bpp low alpha + (0<<21) // 15 bpp low alpha + (0<<22) // 15 bpp low alpha + (0<<23) // 15 bpp low alpha + (0<<24) // static subpicture key + (0<<25) // static subpicture key + (0<<26) // static subpicture key + (0<<27) // static subpicture key + (0<<28) // static subpicture key */ ; break; case MGA_VID_FORMAT_UYVY: card->cregs.c2ctl = 1 // CRTC2 enabled + (1<<1) // external clock + (0<<2) // external clock + (1<<3) // pixel clock enable - not needed ??? + (0<<4) // high prioryty req + (1<<5) // high prioryty req + (0<<6) // high prioryty req + (1<<8) // high prioryty req max + (0<<9) // high prioryty req max + (0<<10) // high prioryty req max + (0<<20) // CRTC1 to DAC + (1<<21) // 422 mode + (0<<22) // 422 mode + (1<<23) // 422 mode + (1<<24) // single chroma line for 420 mode - need to be corrected + (1<<25) /*/ interlace mode - need to be corrected*/ + (0<<26) // field legth polariry + (0<<27) // field identification polariry + (1<<28) // VIDRST detection mode + (0<<29) // VIDRST detection mode + (1<<30) // Horizontal counter preload + (1<<31) // Vertical counter preload ; card->cregs.c2datactl = 0 // enable dither - propably not needed, we are already in YUV mode + (1<<1) // Y filter enable + (1<<2) // CbCr filter enable + (0<<3) // subpicture enable (disabled) + (0<<4) // NTSC enable (disabled - PAL) + (0<<5) // C2 static subpicture enable (disabled) + (0<<6) // C2 subpicture offset division (disabled) + (1<<7) // 422 subformat selection ! /* + (0<<8) // 15 bpp high alpha + (0<<9) // 15 bpp high alpha + (0<<10) // 15 bpp high alpha + (0<<11) // 15 bpp high alpha + (0<<12) // 15 bpp high alpha + (0<<13) // 15 bpp high alpha + (0<<14) // 15 bpp high alpha + (0<<15) // 15 bpp high alpha + (0<<16) // 15 bpp low alpha + (0<<17) // 15 bpp low alpha + (0<<18) // 15 bpp low alpha + (0<<19) // 15 bpp low alpha + (0<<20) // 15 bpp low alpha + (0<<21) // 15 bpp low alpha + (0<<22) // 15 bpp low alpha + (0<<23) // 15 bpp low alpha + (0<<24) // static subpicture key + (0<<25) // static subpicture key + (0<<26) // static subpicture key + (0<<27) // static subpicture key + (0<<28) // static subpicture key */ ; break; default: printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format); return -1; } card->cregs.c2hparam = ( (hdispend - 8) << 16) | (htotal - 8); card->cregs.c2hsync = ( (hsyncend - 8) << 16) | (hsyncstart - 8); card->cregs.c2misc = 0 // CRTCV2 656 togg f0 + (0<<1) // CRTCV2 656 togg f0 + (0<<2) // CRTCV2 656 togg f0 + (0<<4) // CRTCV2 656 togg f1 + (0<<5) // CRTCV2 656 togg f1 + (0<<6) // CRTCV2 656 togg f1 + (0<<8) // Hsync active high + (0<<9) // Vsync active high // 16-27 c2vlinecomp - nevim co tam dat ; card->cregs.c2offset=(card->regs.bespitch << 1); card->cregs.c2pl2startadd0=card->regs.besa1corg; // card->cregs.c2pl2startadd1=card->regs.besa2corg; card->cregs.c2pl3startadd0=card->regs.besa1c3org; // card->cregs.c2pl3startadd1=card->regs.besa2c3org; card->cregs.c2preload=(vsyncstart << 16) | (hsyncstart); // from card->cregs.c2spicstartadd0=0; // not used // card->cregs.c2spicstartadd1=0; // not used card->cregs.c2startadd0=card->regs.besa1org; // card->cregs.c2startadd1=card->regs.besa2org; card->cregs.c2subpiclut=0; //not used card->cregs.c2vparam = ( (vdispend - 1) << 16) | (vtotal - 1); card->cregs.c2vsync = ( (vsyncend - 1) << 16) | (vsyncstart - 1); #endif mga_vid_write_regs(card, 0); return 0; } #ifdef MGA_ALLOW_IRQ static void enable_irq(mga_card_t * card){ long int cc; cc = readl(card->mmio_base + IEN); // printk(KERN_ALERT "*** !!! IRQREG = %d\n", (int)(cc&0xff)); writeb(0x11, card->mmio_base + CRTCX); writeb(0x20, card->mmio_base + CRTCD); /* clear 0, enable off */ writeb(0x00, card->mmio_base + CRTCD); /* enable on */ writeb(0x10, card->mmio_base + CRTCD); /* clear = 1 */ writel(card->regs.besglobctl , card->mmio_base + BESGLOBCTL); } static void disable_irq(mga_card_t * card){ writeb(0x11, card->mmio_base + CRTCX); writeb(0x20, card->mmio_base + CRTCD); /* clear 0, enable off */ } static void mga_handle_irq(int irq, void *dev_id, struct pt_regs *pregs) { // static int frame=0; // static int counter=0; long int cc; mga_card_t * card = dev_id; // printk(KERN_DEBUG "vcount = %d\n",readl(mga_mmio_base + VCOUNT)); //printk("mga_interrupt #%d\n", irq); // check whether the interrupt is really for us (irq sharing) if ( irq != -1 ) { cc = readl(card->mmio_base + STATUS); if ( ! (cc & 0x10) ) return; /* vsyncpen */ // debug_irqcnt++; } // if ( debug_irqignore ) { // debug_irqignore = 0; // frame=(frame+1)&1; card->regs.besctl = (card->regs.besctl & ~0x07000000) + (card->next_frame << 25); writel( card->regs.besctl, card->mmio_base + BESCTL ); #ifdef CRTC2 // sem pridat vyber obrazku !!!! // i han echt kei ahnig was das obe heisse söll crtc2_frame_sel(card->next_frame); #endif #if 0 ++counter; if(!(counter&63)){ printk("mga irq counter = %d\n",counter); } #endif // } else { // debug_irqignore = 1; // } if ( irq != -1 ) { writeb( 0x11, card->mmio_base + CRTCX); writeb( 0, card->mmio_base + CRTCD ); writeb( 0x10, card->mmio_base + CRTCD ); } // writel( card->regs.besglobctl, card->mmio_base + BESGLOBCTL); return; } #endif static int mga_vid_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { int frame, result; uint32_t tmp; mga_card_t * card = (mga_card_t *) file->private_data; switch(cmd) { case MGA_VID_GET_VERSION: tmp = MGA_VID_VERSION; if (copy_to_user((uint32_t *) arg, &tmp, sizeof(uint32_t))) { printk(KERN_ERR "mga_vid: failed copy %p to userspace %p\n", &tmp, (uint32_t *) arg); return -EFAULT; } break; case MGA_VID_CONFIG: //FIXME remove // printk(KERN_DEBUG "mga_vid: vcount = %d\n",readl(card->mmio_base + VCOUNT)); #ifdef MP_DEBUG printk(KERN_DEBUG "mga_vid: mmio_base = %p\n",card->mmio_base); printk(KERN_DEBUG "mga_vid: mem_base = %08x\n",card->mem_base); //FIXME remove printk(KERN_DEBUG "mga_vid: Received configuration\n"); #endif if(copy_from_user(&card->config,(mga_vid_config_t*) arg,sizeof(mga_vid_config_t))) { printk(KERN_ERR "mga_vid: failed copy from userspace\n"); return -EFAULT; } if(card->config.version != MGA_VID_VERSION){ printk(KERN_ERR "mga_vid: incompatible version! driver: %X requested: %X\n",MGA_VID_VERSION,card->config.version); return -EFAULT; } if(card->config.frame_size==0 || card->config.frame_size>1024*768*2){ printk(KERN_ERR "mga_vid: illegal frame_size: %d\n",card->config.frame_size); return -EFAULT; } if(card->config.num_frames<1 || card->config.num_frames>4){ printk(KERN_ERR "mga_vid: illegal num_frames: %d\n",card->config.num_frames); return -EFAULT; } card->src_base = (card->ram_size * 0x100000 - card->config.num_frames * card->config.frame_size - card->top_reserved); if(card->src_base<0){ printk(KERN_ERR "mga_vid: not enough memory for frames!\n"); return -EFAULT; } card->src_base &= (~0xFFFF); // 64k boundary #ifdef MP_DEBUG printk(KERN_DEBUG "mga YUV buffer base: 0x%X\n", card->src_base); #endif if (card->is_g400) card->config.card_type = MGA_G400; else card->config.card_type = MGA_G200; card->config.ram_size = card->ram_size; if (copy_to_user((mga_vid_config_t *) arg, &card->config, sizeof(mga_vid_config_t))) { printk(KERN_ERR "mga_vid: failed copy to userspace\n"); return -EFAULT; } result = mga_vid_set_config(card); if(!result) card->configured=1; return result; break; case MGA_VID_ON: #ifdef MP_DEBUG printk(KERN_DEBUG "mga_vid: Video ON\n"); #endif card->vid_src_ready = 1; if(card->vid_overlay_on) { card->regs.besctl |= 1; mga_vid_write_regs(card, 0); } #ifdef MGA_ALLOW_IRQ if ( card->irq != -1 ) enable_irq(card); #endif card->next_frame=0; break; case MGA_VID_OFF: #ifdef MP_DEBUG printk(KERN_DEBUG "mga_vid: Video OFF (ioctl)\n"); #endif card->vid_src_ready = 0; #ifdef MGA_ALLOW_IRQ if ( card->irq != -1 ) disable_irq(card); #endif card->regs.besctl &= ~1; card->regs.besglobctl &= ~(1<<6); // UYVY format selected mga_vid_write_regs(card, 0); break; case MGA_VID_FSEL: if(copy_from_user(&frame,(int *) arg,sizeof(int))) { printk(KERN_ERR "mga_vid: FSEL failed copy from userspace\n"); return -EFAULT; } mga_vid_frame_sel(card, frame); break; case MGA_VID_GET_LUMA: //tmp = card->regs.beslumactl; //tmp = (tmp&0xFFFF0000) | (((tmp&0xFFFF) - 0x80)&0xFFFF); tmp = (card->brightness << 16) | (card->contrast&0xFFFF); if (copy_to_user((uint32_t *) arg, &tmp, sizeof(uint32_t))) { printk(KERN_ERR "mga_vid: failed copy %p to userspace %p\n", &tmp, (uint32_t *) arg); return -EFAULT; } break; case MGA_VID_SET_LUMA: tmp = arg; card->brightness=tmp>>16; card->contrast=tmp&0xFFFF; //card->regs.beslumactl = (tmp&0xFFFF0000) | ((tmp + 0x80)&0xFFFF); card->regs.beslumactl = (card->brightness << 16) | ((card->contrast+0x80)&0xFFFF); mga_vid_write_regs(card, 0); break; default: printk(KERN_ERR "mga_vid: Invalid ioctl\n"); return -EINVAL; } return 0; } static void cards_init(mga_card_t * card, struct pci_dev * dev, int card_number, int is_g400); // returns the number of found cards static int mga_vid_find_card(void) { struct pci_dev *dev = NULL; char *mga_dev_name; mga_card_t * card; while((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_ANY_ID, dev))) { mga_dev_name = ""; mga_cards_num++; if(mga_cards_num == MGA_MAX_CARDS) { printk(KERN_WARNING "mga_vid: Trying to initialize more than %d cards\n",MGA_MAX_CARDS); mga_cards_num--; break; } card = kmalloc(sizeof(mga_card_t), GFP_KERNEL); if(!card) { printk(KERN_ERR "mga_vid: memory allocation failed\n"); mga_cards_num--; break; } mga_cards[mga_cards_num - 1] = card; switch(dev->device) { case PCI_DEVICE_ID_MATROX_G550: mga_dev_name = "MGA G550"; printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); cards_init(card, dev, mga_cards_num - 1, 1); break; case PCI_DEVICE_ID_MATROX_G400: mga_dev_name = "MGA G400/G450"; printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); cards_init(card, dev, mga_cards_num - 1, 1); break; case PCI_DEVICE_ID_MATROX_G200_AGP: mga_dev_name = "MGA G200 AGP"; printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); cards_init(card, dev, mga_cards_num - 1, 0); break; case PCI_DEVICE_ID_MATROX_G200_PCI: mga_dev_name = "MGA G200"; printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); cards_init(card, dev, mga_cards_num - 1, 0); break; default: mga_cards_num--; printk(KERN_INFO "mga_vid: ignoring matrox device (%d) at %s [%s]\n", dev->device, dev->slot_name, dev->name); break; } } if(!mga_cards_num) { printk(KERN_ERR "mga_vid: No supported cards found\n"); } else { printk(KERN_INFO "mga_vid: %d supported cards found\n", mga_cards_num); } return mga_cards_num; } static void mga_param_buff_fill( mga_card_t * card ) { unsigned len; unsigned size = card->param_buff_size; char * buf = card->param_buff; len = 0; len += snprintf(&buf[len],size-len,"Interface version: %04X\n",MGA_VID_VERSION); len += snprintf(&buf[len],size-len,"Memory: %x:%dM\n",card->mem_base,(unsigned int) card->ram_size); len += snprintf(&buf[len],size-len,"MMIO: %p\n",card->mmio_base); len += snprintf(&buf[len],size-len,"Configurable stuff:\n"); len += snprintf(&buf[len],size-len,"~~~~~~~~~~~~~~~~~~~\n"); len += snprintf(&buf[len],size-len,PARAM_BRIGHTNESS"%d\n",card->brightness); len += snprintf(&buf[len],size-len,PARAM_CONTRAST"%d\n",card->contrast); len += snprintf(&buf[len],size-len,PARAM_BLACKIE"%s\n",card->regs.blackie?"on":"off"); card->param_buff_len = len; // check boundaries of mga_param_buff before writing to it!!! } static ssize_t mga_vid_read(struct file *file, char *buf, size_t count, loff_t *ppos) { uint32_t size; mga_card_t * card = (mga_card_t *) file->private_data; if(!card->param_buff) return -ESPIPE; if(!(*ppos)) mga_param_buff_fill(card); if(*ppos >= card->param_buff_len) return 0; size = min(count,card->param_buff_len-(uint32_t)(*ppos)); memcpy(buf,card->param_buff,size); *ppos += size; return size; } static ssize_t mga_vid_write(struct file *file, const char *buf, size_t count, loff_t *ppos) { mga_card_t * card = (mga_card_t *) file->private_data; if(memcmp(buf,PARAM_BRIGHTNESS,min(count,strlen(PARAM_BRIGHTNESS))) == 0) { short brightness; brightness=simple_strtol(&buf[strlen(PARAM_BRIGHTNESS)],NULL,10); if (brightness>127 || brightness<-128) { brightness=0;} // printk(KERN_DEBUG "mga_vid: brightness modified ( %d ) \n",brightness); card->brightness=brightness; } else if(memcmp(buf,PARAM_CONTRAST,min(count,strlen(PARAM_CONTRAST))) == 0) { short contrast; contrast=simple_strtol(&buf[strlen(PARAM_CONTRAST)],NULL,10); if (contrast>127 || contrast<-128) { contrast=0;} // printk(KERN_DEBUG "mga_vid: contrast modified ( %d ) \n",contrast); card->contrast=contrast; } else if(memcmp(buf,PARAM_BLACKIE,min(count,strlen(PARAM_BLACKIE))) == 0) { short blackie; blackie=simple_strtol(&buf[strlen(PARAM_BLACKIE)],NULL,10); // printk(KERN_DEBUG "mga_vid: shadow mode: ( %d ) \n",blackie); card->regs.blackie=(blackie>0)?1:0; } else count = -EIO; // TODO: reset settings return count; } static int mga_vid_mmap(struct file *file, struct vm_area_struct *vma) { mga_card_t * card = (mga_card_t *) file->private_data; #ifdef MP_DEBUG printk(KERN_DEBUG "mga_vid: mapping video memory into userspace\n"); #endif if(!card->configured) { printk(KERN_ERR "mga_vid: card is not configured, cannot mmap\n"); return -EAGAIN; } if(remap_page_range(vma->vm_start, card->mem_base + card->src_base, vma->vm_end - vma->vm_start, vma->vm_page_prot)) { printk(KERN_ERR "mga_vid: error mapping video memory\n"); return -EAGAIN; } return 0; } static int mga_vid_release(struct inode *inode, struct file *file) { mga_card_t * card; //Close the window just in case #ifdef MP_DEBUG printk(KERN_DEBUG "mga_vid: Video OFF (release)\n"); #endif card = (mga_card_t *) file->private_data; card->vid_src_ready = 0; card->regs.besctl &= ~1; card->regs.besglobctl &= ~(1<<6); // UYVY format selected // card->config.colkey_on=0; //!!! mga_vid_write_regs(card, 1); card->vid_in_use = 0; MOD_DEC_USE_COUNT; return 0; } static long long mga_vid_lseek(struct file *file, long long offset, int origin) { return -ESPIPE; } static int mga_vid_open(struct inode *inode, struct file *file) { mga_card_t * card; int minor = MINOR(inode->i_rdev); if(!file->private_data) { // we are not using devfs, use the minor // number to specify the card we are using // we don't have that many cards if(minor >= mga_cards_num) return -ENXIO; file->private_data = mga_cards[minor]; #ifdef MP_DEBUG printk(KERN_DEBUG "mga_vid: Not using devfs\n"); #endif } #ifdef MP_DEBUG else { printk(KERN_DEBUG "mga_vid: Using devfs\n"); } #endif card = (mga_card_t *) file->private_data; if(card->vid_in_use == 1) return -EBUSY; card->vid_in_use = 1; MOD_INC_USE_COUNT; return 0; } #if LINUX_VERSION_CODE >= 0x020400 static struct file_operations mga_vid_fops = { llseek: mga_vid_lseek, read: mga_vid_read, write: mga_vid_write, ioctl: mga_vid_ioctl, mmap: mga_vid_mmap, open: mga_vid_open, release: mga_vid_release }; #else static struct file_operations mga_vid_fops = { mga_vid_lseek, mga_vid_read, mga_vid_write, NULL, NULL, mga_vid_ioctl, mga_vid_mmap, mga_vid_open, NULL, mga_vid_release }; #endif static void cards_init(mga_card_t * card, struct pci_dev * dev, int card_number, int is_g400) { unsigned int card_option; // temp buffer for device filename creation used only by devfs #ifdef CONFIG_DEVFS_FS char buffer[16]; #endif memset(card,0,sizeof(mga_card_t)); card->irq = -1; card->pci_dev = dev; card->irq = dev->irq; card->is_g400 = is_g400; card->param_buff = kmalloc(PARAM_BUFF_SIZE,GFP_KERNEL); if(card->param_buff) card->param_buff_size = PARAM_BUFF_SIZE; card->brightness = mga_brightness[card_number]; card->contrast = mga_contrast[card_number]; card->top_reserved = mga_top_reserved[card_number]; #if LINUX_VERSION_CODE >= 0x020300 card->mmio_base = ioremap_nocache(dev->resource[1].start,0x4000); card->mem_base = dev->resource[0].start; #else card->mmio_base = ioremap_nocache(dev->base_address[1] & PCI_BASE_ADDRESS_MEM_MASK,0x4000); card->mem_base = dev->base_address[0] & PCI_BASE_ADDRESS_MEM_MASK; #endif printk(KERN_INFO "mga_vid: MMIO at 0x%p IRQ: %d framebuffer: 0x%08X\n", card->mmio_base, card->irq, card->mem_base); pci_read_config_dword(dev, 0x40, &card_option); printk(KERN_INFO "mga_vid: OPTION word: 0x%08X mem: 0x%02X %s\n", card_option, (card_option>>10)&0x17, ((card_option>>14)&1)?"SGRAM":"SDRAM"); if (mga_ram_size[card_number]) { printk(KERN_INFO "mga_vid: RAMSIZE forced to %d MB\n", mga_ram_size[card_number]); card->ram_size=mga_ram_size[card_number]; } else { #ifdef MGA_MEMORY_SIZE card->ram_size = MGA_MEMORY_SIZE; printk(KERN_INFO "mga_vid: hard-coded RAMSIZE is %d MB\n", (unsigned int) card->ram_size); #else if (card->is_g400){ switch((card_option>>10)&0x17){ // SDRAM: case 0x00: case 0x04: card->ram_size = 16; break; case 0x03: case 0x05: card->ram_size = 32; break; // SGRAM: case 0x10: case 0x14: card->ram_size = 32; break; case 0x11: case 0x12: card->ram_size = 16; break; default: card->ram_size = 16; printk(KERN_INFO "mga_vid: Couldn't detect RAMSIZE, assuming 16MB!"); } /* Check for buggy 16MB cards reporting 32 MB */ if(card->ram_size != 16 && (dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM || dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM || dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB)) { printk(KERN_INFO "mga_vid: Detected 16MB card reporting %d MB RAMSIZE, overriding\n", card->ram_size); card->ram_size = 16; } }else{ switch((card_option>>10)&0x17){ // case 0x10: // case 0x13: card->ram_size = 8; break; default: card->ram_size = 8; } } #if 0 // printk("List resources -----------\n"); for(temp=0;temp<DEVICE_COUNT_RESOURCE;temp++){ struct resource *res=&dev->resource[temp]; if(res->flags){ int size=(1+res->end-res->start)>>20; printk(KERN_DEBUG "res %d: start: 0x%X end: 0x%X (%d MB) flags=0x%X\n",temp,res->start,res->end,size,res->flags); if(res->flags&(IORESOURCE_MEM|IORESOURCE_PREFETCH)){ if(size>card->ram_size && size<=64) card->ram_size=size; } } } #endif printk(KERN_INFO "mga_vid: detected RAMSIZE is %d MB\n", (unsigned int) card->ram_size); #endif } #ifdef MGA_ALLOW_IRQ if ( card->irq != -1 ) { int tmp = request_irq(card->irq, mga_handle_irq, SA_INTERRUPT | SA_SHIRQ, "Syncfb Time Base", card); if ( tmp ) { printk(KERN_INFO "syncfb (mga): cannot register irq %d (Err: %d)\n", card->irq, tmp); card->irq=-1; } else { printk(KERN_DEBUG "syncfb (mga): registered irq %d\n", card->irq); } } else { printk(KERN_INFO "syncfb (mga): No valid irq was found\n"); card->irq=-1; } #else printk(KERN_INFO "syncfb (mga): IRQ disabled in mga_vid.c\n"); card->irq=-1; #endif // register devfs, let the kernel give us major and minor numbers #ifdef CONFIG_DEVFS_FS snprintf(buffer, 16, "mga_vid%d", card_number); card->dev_handle = devfs_register(NULL, buffer, DEVFS_FL_AUTO_DEVNUM, 0, 0, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IFCHR, &mga_vid_fops, card); #endif } /* * Main Initialization Function */ static int mga_vid_initialize(void) { int i; // printk(KERN_INFO "Matrox MGA G200/G400 YUV Video interface v0.01 (c) Aaron Holtzman \n"); printk(KERN_INFO "Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi\n"); for(i = 0; i < MGA_MAX_CARDS; i++) { if (mga_ram_size[i]) { if (mga_ram_size[i]<4 || mga_ram_size[i]>64) { printk(KERN_ERR "mga_vid: invalid RAMSIZE: %d MB\n", mga_ram_size[i]); return -EINVAL; } } } if(register_chrdev(major, "mga_vid", &mga_vid_fops)) { printk(KERN_ERR "mga_vid: unable to get major: %d\n", major); return -EIO; } if (!mga_vid_find_card()) { printk(KERN_ERR "mga_vid: no supported devices found\n"); unregister_chrdev(major, "mga_vid"); return -EINVAL; } #ifdef CONFIG_DEVFS_FS else { // we assume that this always succeedes dev_handle = devfs_register(NULL, "mga_vid", DEVFS_FL_AUTO_DEVNUM, 0,0, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IFCHR, &mga_vid_fops, mga_cards[0]); } #endif return 0; } int init_module(void) { return mga_vid_initialize(); } void cleanup_module(void) { int i; mga_card_t * card; for (i = 0; i < MGA_MAX_CARDS; i++) { card = mga_cards[i]; if(card) { #ifdef MGA_ALLOW_IRQ if (card->irq != -1) free_irq(card->irq, &(card->irq)); #endif if(card->mmio_base) iounmap(card->mmio_base); if(card->param_buff) kfree(card->param_buff); #ifdef CONFIG_DEVFS_FS if(card->dev_handle) devfs_unregister(card->dev_handle); #endif kfree(card); mga_cards[i]=NULL; } } //FIXME turn off BES printk(KERN_INFO "mga_vid: Cleaning up module\n"); #ifdef CONFIG_DEVFS_FS if(dev_handle) devfs_unregister(dev_handle); #endif unregister_chrdev(major, "mga_vid"); }