view debian/rules @ 34309:119af6360b00

Discard frames where the size does not match the AVCodecContext width/height. This avoids possible crashes on video size changes. The problem is that we reinitialize the vo on get_buffer but due to codec delay libavcodec might still return frames with the old size afterwards, which the vo might no longer be able to handle. Ideally libavcodec should not show this behaviour, since it requires that any application using DR1 can handle frames of different sizes simultaneously - which seems a bit extreme.

#!/usr/bin/make -f

# This has to be exported to make some magic below work.
export DH_OPTIONS

# Support multiple makes at once
ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
NUMJOBS = -j$(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
else
# on i386 and amd64, we query the system unless overriden by DEB_BUILD_OPTIONS
ifeq      ($(DEB_BUILD_ARCH),i386)
NUMJOBS := -j$(shell getconf _NPROCESSORS_ONLN 2>/dev/null || echo 1)
else ifeq ($(DEB_BUILD_ARCH),amd64)
NUMJOBS := -j$(shell getconf _NPROCESSORS_ONLN 2>/dev/null || echo 1)
endif
endif


# do not run the actual rules of this makefile in parallel. sub-makes
# can go in parallel
.NOTPARALLEL:

############

DEB_SOURCE := $(shell dpkg-parsechangelog | sed -n 's/^Source: //p')
DEB_VERSION := $(shell dpkg-parsechangelog | sed -n 's/^Version: //p')
UPSTREAM_VERSION := $(shell echo $(DEB_VERSION) | sed -r 's/[^:]+://; s/-[^-]+$$//')
SVN_VERSION := $(shell echo $(UPSTREAM_VERSION) | sed -nr 's/^[0-9.:-~]+\+svn([0-9]+)$$/\1/p')


#UPSTREAMSOURCE := upstream SVN repository
UPSTREAMSOURCE := http://www1.mplayerhq.hu/MPlayer/releases/MPlayer-1.0rc1.tar.bz2

DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
DEB_HOST_ARCH       ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
DEB_HOST_ARCH_OS    ?= $(shell dpkg-architecture -qDEB_HOST_ARCH_OS)
DEB_HOST_ARCH_CPU   ?= $(shell dpkg-architecture -qDEB_HOST_ARCH_CPU)


# XXX enable-menu is frowned upon by upstream
CONFIGURE_FLAGS = \
	--prefix=/usr \
	--confdir=/etc/mplayer \
	--enable-xvmc \
	--enable-menu \
	--disable-arts \
	--language=all \
	$(archconf)

ifeq ($(DEB_HOST_ARCH),i386)
#configure optimizes for the cpu detected at ./configure time
#in order to build a generic binary, avoid non-standard opcodes through gcc
  archconf += --target=i586-linux
  CONFIGURE_FLAGS += --enable-runtime-cpudetection
endif
ifeq ($(DEB_HOST_ARCH),amd64)
  CONFIGURE_FLAGS += --enable-runtime-cpudetection
endif
ifeq ($(DEB_HOST_ARCH),kfreebsd-i386)
  CONFIGURE_FLAGS += --enable-runtime-cpudetection
endif
ifeq ($(DEB_HOST_ARCH),kfreebsd-amd64)
  CONFIGURE_FLAGS += --enable-runtime-cpudetection
endif
ifeq ($(DEB_HOST_ARCH),powerpc)
  CONFIGURE_FLAGS += --enable-runtime-cpudetection
endif
ifeq ($(DEB_HOST_ARCH),alpha)
#Avoid high optimization through gcc.
# see http://permalink.gmane.org/gmane.linux.debian.ports.alpha/7295
  archconf += --target=alpha_ev5-linux
endif

# generate debugging symbols for mplayer-dbg for all archs but mipsen,
# see bug #520113
ifeq (,$(findstring mips,$(DEB_HOST_ARCH)))
CONFIGURE_FLAGS += --enable-debug
endif

ifeq (linux,$(DEB_HOST_ARCH_OS))
    CONFIGURE_FLAGS += --enable-mga --enable-3dfx --enable-tdfxfb
endif

ifneq (,$(DEB_EXTRA_CONFIGURE_FLAGS))
    CONFIGURE_FLAGS += $(DEB_EXTRA_CONFIGURE_FLAGS)
endif

build: build-arch build-indep

####### build-arch
build-arch:
	dh_testdir
	dh_prep -a
	$(MAKE) -f debian/rules debian/mplayer/usr/bin/mplayer
	$(MAKE) -f debian/rules debian/mencoder/usr/bin/mencoder
	$(MAKE) -f debian/rules debian/mplayer-gui/usr/bin/gmplayer

# build non-gui version
# & mencoder
debian/mplayer/usr/bin/mplayer debian/mencoder/usr/bin/mencoder:
	dh_testdir
	$(CLEAN_ENV) \
	./configure $(CONFIGURE_FLAGS) --disable-gui
	$(CLEAN_ENV) \
	$(MAKE) $(NUMJOBS) mplayer mencoder V=1
	$(MAKE) install-mplayer DESTDIR=$(CURDIR)/debian/mplayer
	$(MAKE) install-mplayer-man DESTDIR=$(CURDIR)/debian/mplayer
	$(MAKE) install-mencoder DESTDIR=$(CURDIR)/debian/mencoder
	$(MAKE) install-mencoder-man DESTDIR=$(CURDIR)/debian/mplayer
	install -D -m 644 debian/mplayer.conf \
	                  $(CURDIR)/debian/mplayer/etc/mplayer/mplayer.conf

# build gui version
debian/mplayer-gui/usr/bin/gmplayer:
	dh_testdir
	$(CLEAN_ENV) \
	./configure $(CONFIGURE_FLAGS) --enable-gui
	$(CLEAN_ENV) \
	$(MAKE) $(NUMJOBS) mplayer V=1
	install -D -m 755 mplayer $(CURDIR)/debian/mplayer-gui/usr/bin/gmplayer
	install -D -m 644 etc/mplayer.desktop \
	                  $(CURDIR)/debian/mplayer-gui/usr/share/applications/mplayer.desktop
	install -D -m 644 etc/mplayer.png \
	                  $(CURDIR)/debian/mplayer-gui/usr/share/pixmaps/mplayer.png


# binaries already installed via build rules as we have to build several flavors
install-arch: build-arch

###### build-indep
DOCS/HTML/en/index.html:
	$(MAKE) html-chunked

build-indep:
	dh_testdir
	dh_prep -i
	test -f DOCS/HTML/en/index.html || $(MAKE) -f debian/rules DOCS/HTML/en/index.html

# commands to compile the documentation
install-indep: build-indep
	dh_installchangelogs -i
	dh_installdocs -i
	dh_compress -i
	dh_fixperms -i

################ clean

clean:
	dh_testdir
	dh_testroot
	-test -f config.mak && $(MAKE) distclean

# Build architecture-independent packages
binary-indep: install-indep

# Build architecture-dependent packages
binary-arch: install-arch
	dh_testdir
	dh_testroot
	dh_install -a
	dh_installchangelogs -a
	dh_installdocs -a
	dh_installexamples -a
	dh_installmenu -a
	dh_installmime -a
	dh_installman -a
	dh_strip -a --dbg-package=mplayer-dbg
	dh_link
	dh_compress -a
	dh_fixperms -a
	dh_makeshlibs -a
	dh_installdeb
	dh_shlibdeps -- --ignore-missing-info
	dh_gencontrol
	dh_md5sums
	dh_builddeb

binary: binary-indep binary-arch

PHONY += build clean binary-indep binary-arch binary-common binary
PHONY += install binary binary-arch binary-indep clean checkroot get-orig-source
PHONY += autocontrol fix-orig-source copy-orig-from-svn download-and-unpack-orig

.PHONY: $(PHONY)