Mercurial > mplayer.hg
view libaf/af_volume.c @ 36418:155e6100949c
Code changes to avoid additional unnecessary re-inits.
author | reimar |
---|---|
date | Sat, 16 Nov 2013 23:23:46 +0000 |
parents | 07e9ebd91b98 |
children |
line wrap: on
line source
/* * Copyright (C)2002 Anders Johansson ajh@atri.curtin.edu.au * * This file is part of MPlayer. * * MPlayer is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * MPlayer is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with MPlayer; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ /* This audio filter changes the volume of the sound, and can be used when the mixer doesn't support the PCM channel. It can handle between 1 and AF_NCH channels. The volume can be adjusted between -60dB to +20dB and is set on a per channels basis. The is accessed through AF_CONTROL_VOLUME_LEVEL. The filter has support for soft-clipping, it is enabled by AF_CONTROL_VOLUME_SOFTCLIPP. */ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <inttypes.h> #include <math.h> #include <limits.h> #include "libavutil/common.h" #include "mp_msg.h" #include "af.h" // Data for specific instances of this filter typedef struct af_volume_s { float max; // Max Power level [dB] float level[AF_NCH]; // Gain level for each channel int soft; // Enable/disable soft clipping int fast; // Use fix-point volume control }af_volume_t; // Initialization and runtime control static int control(struct af_instance_s* af, int cmd, void* arg) { af_volume_t* s = (af_volume_t*)af->setup; switch(cmd){ case AF_CONTROL_REINIT: // Sanity check if(!arg) return AF_ERROR; af->data->rate = ((af_data_t*)arg)->rate; af->data->nch = ((af_data_t*)arg)->nch; if(s->fast && (((af_data_t*)arg)->format != (AF_FORMAT_FLOAT_NE))){ af->data->format = AF_FORMAT_S16_NE; af->data->bps = 2; } else{ af->data->format = AF_FORMAT_FLOAT_NE; af->data->bps = 4; } return af_test_output(af,(af_data_t*)arg); case AF_CONTROL_COMMAND_LINE:{ float v=0.0; float vol[AF_NCH]; int i; sscanf((char*)arg,"%f:%i", &v, &s->soft); for(i=0;i<AF_NCH;i++) vol[i]=v; return control(af,AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_SET, vol); } case AF_CONTROL_POST_CREATE: s->fast = ((((af_cfg_t*)arg)->force & AF_INIT_FORMAT_MASK) == AF_INIT_FLOAT) ? 0 : 1; return AF_OK; case AF_CONTROL_VOLUME_SOFTCLIP | AF_CONTROL_SET: s->soft = *(int*)arg; return AF_OK; case AF_CONTROL_VOLUME_SOFTCLIP | AF_CONTROL_GET: *(int*)arg = s->soft; return AF_OK; case AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_SET: return af_from_dB(AF_NCH,(float*)arg,s->level,20.0,-200.0,60.0); case AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_GET: return af_to_dB(AF_NCH,s->level,(float*)arg,20.0); case AF_CONTROL_PRE_DESTROY: if(!s->fast){ float m = s->max; af_to_dB(1, &m, &m, 10.0); mp_msg(MSGT_AFILTER, MSGL_INFO, "[volume] The maximum volume was %0.2fdB \n", m); } return AF_OK; } return AF_UNKNOWN; } // Deallocate memory static void uninit(struct af_instance_s* af) { free(af->data); free(af->setup); } static av_always_inline void s16_inner_loop(int16_t *data, int len, int offset, int step, float level) { int i; register int vol = (int)(255.0 * level); for (i = offset; i < len; i += step) { register int x = (data[i] * vol) >> 8; data[i] = av_clip_int16(x); } } static av_always_inline void float_inner_loop(float *data, int len, int offset, int step, float level, int softclip) { int i; #if HAVE_NEON if (offset == 0 && step == 1 && !softclip && len >= 8) { __asm__( "vmov.32 d2[0], %2\n\t" "vdup.32 q8, %3\n\t" "vneg.f32 q9, q8\n\t" "0:\n\t" "vld1.32 {q0}, [%0]\n\t" "vmul.f32 q0, q0, d2[0]\n\t" "cmp %0, %1\n\t" "vmin.f32 q0, q0, q8\n\t" "vmax.f32 q0, q0, q9\n\t" "vst1.32 {q0}, [%0]!\n\t" "blo 0b\n\t" : "+&r"(data) : "r"(data + len - 7), "r"(level), "r"(0x3f800000) : "cc", "q0", "d2", "q8", "q9", "memory"); len &= 3; } #endif for (i = offset; i < len; i += step) { register float x = data[i]; // Set volume x *= level; /* Soft clipping, the sound of a dream, thanks to Jon Wattes post to Musicdsp.org */ if (softclip) x = af_softclip(x); // Hard clipping else x = av_clipf(x,-1.0,1.0); data[i] = x; } } // Filter data through filter static af_data_t* play(struct af_instance_s* af, af_data_t* data) { af_data_t* c = data; // Current working data af_volume_t* s = af->setup; // Setup for this instance int ch = 0; // Channel counter register int nch = c->nch; // Number of channels register int i = 0; int same_vol = 1; for (ch = 1; ch < nch; ch++) { same_vol &= s->level[ch] == s->level[ch - 1]; } // Basic operation volume control only (used on slow machines) if(af->data->format == (AF_FORMAT_S16_NE)){ int16_t* a = (int16_t*)c->audio; // Audio data int len = c->len/2; // Number of samples if (same_vol) s16_inner_loop(a, len, 0, 1, s->level[0]); else for (ch = 0; ch < nch; ch++) s16_inner_loop(a, len, ch, nch, s->level[ch]); } // Machine is fast and data is floating point else if(af->data->format == (AF_FORMAT_FLOAT_NE)){ float* a = (float*)c->audio; // Audio data int len = c->len/4; // Number of samples for (i = 0; !s->fast && i < len; i++) // Check maximum power value s->max = FFMAX(s->max, a[i] * a[i]); if (same_vol && s->soft) float_inner_loop(a, len, 0, 1, s->level[0], 1); else if (same_vol) float_inner_loop(a, len, 0, 1, s->level[0], 0); else for (ch = 0; ch < nch; ch++) float_inner_loop(a, len, ch, nch, s->level[ch], s->soft); } return c; } // Allocate memory and set function pointers static int af_open(af_instance_t* af){ int i = 0; af->control=control; af->uninit=uninit; af->play=play; af->mul=1; af->data=calloc(1,sizeof(af_data_t)); af->setup=calloc(1,sizeof(af_volume_t)); if(af->data == NULL || af->setup == NULL) return AF_ERROR; // Enable volume control and set initial volume to 0dB. for(i=0;i<AF_NCH;i++){ ((af_volume_t*)af->setup)->level[i] = 1.0; } return AF_OK; } // Description of this filter af_info_t af_info_volume = { "Volume control audio filter", "volume", "Anders", "", AF_FLAGS_NOT_REENTRANT, af_open };