Mercurial > mplayer.hg
view DOCS/xml/en/codecs.xml @ 12055:174ff71996aa
sync by danny <guru@digitalfantasy.it>
author | diego |
---|---|
date | Tue, 23 Mar 2004 04:24:52 +0000 |
parents | 204cb6d58da6 |
children | 6c19f8e780fc |
line wrap: on
line source
<?xml version="1.0" encoding="iso-8859-1"?> <!-- $Revision$ --> <sect1 id="codecs"> <title>Supported codecs</title> <sect2 id="video-codecs"> <title>Video codecs</title> <para> See the <ulink url="http://www.mplayerhq.hu/homepage/codecs-status.html">codec status table</ulink> for the complete, daily generated list. Quite a few codecs are available for download from our homepage. Grab them from our <ulink url="http://www.mplayerhq.hu/MPlayer/releases/codecs/">codecs page</ulink>. </para> <para> The most important ones above all: </para> <itemizedlist> <listitem><simpara> <emphasis role="bold">MPEG1</emphasis> (<emphasis role="bold">VCD</emphasis>) and <emphasis role="bold">MPEG2</emphasis> (<emphasis role="bold">DVD</emphasis>) video </simpara></listitem> <listitem><simpara> native decoders for <emphasis role="bold">DivX ;-), OpenDivX (DivX4), DivX 5.01, 3ivX, M$ MPEG4</emphasis> v1, v2 and other MPEG4 variants </simpara></listitem> <listitem><simpara> native decoder for <emphasis role="bold">Windows Media Video 7/8</emphasis> (<emphasis role="bold">WMV1/WMV2</emphasis>), and Win32 DLL decoder for <emphasis role="bold">Windows Media Video 9</emphasis> (<emphasis role="bold">WMV3</emphasis>), both used in <filename>.wmv</filename> files </simpara></listitem> <listitem><simpara> native <emphasis role="bold">Sorenson 1 (SVQ1)</emphasis> decoder </simpara></listitem> <listitem><simpara> native <emphasis role="bold">Sorenson 3 (SVQ3)</emphasis> decoder </simpara></listitem> <listitem><simpara> <emphasis role="bold">3ivx</emphasis> v1, v2 decoder </simpara></listitem> <listitem><simpara> Cinepak and <emphasis role="bold">Intel Indeo</emphasis> codecs (3.1,3.2,4.1,5.0) </simpara></listitem> <listitem><simpara> <emphasis role="bold">MJPEG</emphasis>, AVID, VCR2, ASV2 and other hardware formats </simpara></listitem> <listitem><simpara> VIVO 1.0, 2.0, I263 and other <emphasis role="bold">h263(+)</emphasis> variants </simpara></listitem> <listitem><simpara> FLI/FLC </simpara></listitem> <listitem><simpara> <emphasis role="bold">RealVideo 1.0 & 2.0</emphasis> from <systemitem class="library">libavcodec</systemitem>, and <emphasis role="bold">RealVideo 3.0 & 4.0</emphasis> codecs using RealPlayer libraries </simpara></listitem> <listitem><simpara> native decoder for HuffYUV </simpara></listitem> <listitem><simpara> Various old simple RLE-like formats </simpara></listitem> </itemizedlist> <para> If you have a Win32 codec not listed here which is not supported yet, please read the <link linkend="win32-codecs">codec importing HOWTO</link> and help us add support for it. </para> <sect3 id="divx4-5"> <title>DivX4/DivX5</title> <para> This section contains information about the DivX4 and DivX5 codecs of <ulink url="http://www.projectmayo.com">Project Mayo</ulink>. Their first available alpha version was OpenDivX 4.0 alpha 47 and 48. Support for this was included in <application>MPlayer</application> in the past, and built by default. We also used its postprocessing code to optionally enhance visual quality of MPEG1/2 movies. Now we use our own, for all file types. </para> <para> The new generation of this codec is called DivX4 and can even decode movies made with the infamous DivX codec! In addition it is much faster than the native Win32 DivX DLLs but slower than <systemitem class="library">libavcodec</systemitem>. Hence its usage as a decoder is <emphasis role="bold">discouraged</emphasis>. However, it is useful for encoding. One disadvantage of this codec is that it is not available under an Open Source license. </para> <para> DivX4 works in two modes: <variablelist> <varlistentry><term><option>-vc odivx</option></term> <listitem><simpara> Uses the codec in OpenDivX fashion. In this case it produces YV12 images in its own buffer, and <application>MPlayer</application> does colorspace conversion via libvo. (<emphasis role="bold">Fast, recommended!</emphasis>) </simpara></listitem> </varlistentry> <varlistentry><term><option>-vc divx4</option></term> <listitem><simpara> Uses the colorspace conversion of the codec. In this mode you can use YUY2/UYVY, too. (<emphasis role="bold">SLOW</emphasis>) </simpara></listitem> </varlistentry> </variablelist> </para> <para> The <option>-vc odivx</option> method is usually faster, due to the fact that it transfers image data in YV12 (planar YUV 4:2:0) format, thus requiring much less bandwidth on the bus. For packed YUV modes (YUY2, UYVY) use the <option>-vc divx4</option> method. For RGB modes the speed is the same, differing at best according to your current color depth. <note> <para> If your <option>-vo</option> driver supports direct rendering, then <option>-vc divx4</option> may be faster, or even the fastest solution. </para> <para> The DivX4/5 binary codec library can be downloaded from <ulink url="http://avifile.sourceforge.net">avifile</ulink> or <ulink url="http://www.divx.com">divx.com</ulink> Unpack it, run <filename>./install.sh</filename> as root and do not forget adding <filename class="directory">/usr/local/lib</filename> to your <filename>/etc/ld.so.conf</filename> and running <command>ldconfig</command>. </para> <para> Get the CVS version of the OLD OpenDivX core library like this: </para> <procedure> <step><para> <screen>cvs -d:pserver:anonymous@cvs.projectmayo.com:/cvsroot login</screen> </para></step> <step><para> <screen>cvs -d:pserver:anonymous@cvs.projectmayo.com:/cvsroot co divxcore</screen> </para></step> <step><para> This core library is split into a decore and encore library that have to be compiled separately. For the decore Library, simply type <screen> cd divxcore/decore/build/linux make cp libdivxdecore.so /usr/local/lib ln -s libdivxdecore.so /usr/local/lib/libdivxdecore.so.0 cp ../../src/decore.h /usr/local/include </screen> </para></step> <step><para> Alas, for the encore library there is no Linux Makefile available, and the MMX optimized code only works on Windows. You can still compile it, though, by using this <ulink url="ftp://ftp.mplayerhq.hu/MPlayer/contrib/divx-mf/Makefile">Makefile</ulink>. <screen> cd ../../../encore/build mkdir linux cd linux cp path/Makefile . make cp libdivxencore.so /usr/local/lib ln -s libdivxencore.so /usr/local/lib/libdivxencore.so.0 cp ../../src/encore.h /usr/local/include </screen> </para></step> </procedure> <para> <application>MPlayer</application> autodetects DivX4/DivX5 if it is properly installed, just compile as usual. If it does not detect it, you did not install or configure it correctly. </para> </note> </para> </sect3> <sect3 id="ffmpeg" xreflabel="FFmpeg/libavcodec"> <title>FFmpeg/libavcodec</title> <para> <ulink url="http://ffmpeg.sourceforge.net">FFmpeg</ulink> contains an <emphasis role="bold">open source</emphasis> codec package, which is capable of decoding streams with various audio and video codecs. It also offers an impressing encoding facility and higher speed than the Win32 codecs or the DivX.com DivX4/5 libraries! </para> <para> It contains a lot of nice codecs, especially important are the MPEG4 variants: DivX3, DivX4, DivX5, Windows Media Video 7/8 (WMV1/WMV2). Also a very interesting one is the WMA decoder. </para> <para> The most recent codec deserving credit is the <emphasis role="bold">Sorenson 3</emphasis> (SVQ3) codec. This is the first, completely opensource implementation. It's even faster than the original. Be sure to prefer this instead of the binary codec! </para> <para> For a complete list of supported codecs please visit the FFmpeg homepage. Supported <ulink url="http://www.ffmpeg.org/ffmpeg-doc.html#SEC19">video</ulink> and <ulink url="http://www.ffmpeg.org/ffmpeg-doc.html#SEC20">audio</ulink> codecs. </para> <para> If you use an <application>MPlayer</application> release you have <systemitem class="library">libavcodec</systemitem> right in the package, just build as usual. If you use <application>MPlayer</application> from CVS you have to extract <systemitem class="library">libavcodec</systemitem> from the FFmpeg CVS tree as FFmpeg releases are very rare. The CVS is mostly stable and offers the most features. In order to achieve this do: </para> <procedure> <step><para> <screen>cvs -d:pserver:anonymous@mplayerhq.hu:/cvsroot/ffmpeg login</screen> </para></step> <step><para> <screen>cvs -d:pserver:anonymous@mplayerhq.hu:/cvsroot/ffmpeg co ffmpeg</screen> </para></step> <step><para> Move the <filename>libavcodec</filename> directory from the FFmpeg sources to the root of the <application>MPlayer</application> CVS tree. It should look like this: <filename class="directory">main/libavcodec</filename> </para><para> Symlinking is <emphasis role="bold">not</emphasis> enough, you have to copy/move it! </para></step> <step><para> If you prefer having <systemitem class="library">libavcodec</systemitem> updated at the same time you update <application>MPlayer</application> CVS, put the following line into the <filename>main/CVS/Entries</filename> file: <screen>D/libavcodec////</screen> </para></step> <step><para> Compile. <filename>configure</filename> should detect problems before compilation. </para></step> </procedure> <note> <para> <application>MPlayer</application> from CVS does contain a <filename>libavcodec</filename> subdirectory, but it does <emphasis role="bold">not</emphasis> contain the source for <systemitem class="library">libavcodec</systemitem>! You must follow the steps above to obtain the source for this library. </para> </note> <para> With FFmpeg and my Matrox G400, I can view even the highest resolution DivX movies without dropped frames on my K6-2 500. </para> </sect3> <sect3 id="xanim"> <title>XAnim codecs</title> <note> <para> Be advised that the XAnim binary codecs are packaged with a piece of text claiming to be a legally binding software license which, besides other restrictions, forbids the user to use the codecs in conjunction with any program other than <application>XAnim</application>. However, the XAnim author has yet to bring legal action against anyone for codec-related issues. </para> </note> <formalpara> <title>INSTALLATION AND USAGE</title> <para> <application>MPlayer</application> is capable of employing the XAnim codecs for decoding. Follow the instructions to enable them: </para> </formalpara> <procedure> <step><para> Download the codecs you wish to use from the <ulink url="http://xanim.va.pubnix.com">XAnim site</ulink>. The <emphasis role="bold">3ivx</emphasis> codec is not there, but at the <ulink url="http://www.3ivx.com">3ivx site</ulink>. </para></step> <step><para> <emphasis role="bold">OR</emphasis> download the codecs pack from our <ulink url="http://www.mplayerhq.hu/MPlayer/releases/codecs/">codecs page</ulink> </para></step> <step><para> Use the <option>--with-xanimlibdir</option> option to tell <filename>configure</filename> where to find the XAnim codecs. By default, it looks for them at <filename class="directory">/usr/local/lib/codecs</filename>, <filename class="directory">/usr/local/lib/xanim/mods</filename>, <filename class="directory">/usr/lib/xanim/mods</filename> and <filename class="directory">/usr/lib/xanim</filename>. Alternatively you can set the environment variable <envar>XANIM_MOD_DIR</envar> to the directory of the XAnim codecs. </para></step> <step><para> Rename/symlink the files, cutting out the architecture stuff, so they will have filenames like these: <filename>vid_cvid.xa</filename>, <filename>vid_h263.xa</filename>, <filename>vid_iv50.xa</filename> </para></step> </procedure> <para> XAnim is video codec family <systemitem>xanim</systemitem>, so you may want to use the <option>-vfm xanim</option> option to tell <application>MPlayer</application> to use them if possible. </para> <para> Tested codecs include: <emphasis role="bold">Indeo 3.2, 4.1, 5.0, CVID, 3ivX, h263.</emphasis> </para> </sect3> <sect3 id="vivo-video"> <title>VIVO video</title> <para> <application>MPlayer</application> can play Vivo (1.0 and 2.0) videos. The most suitable codec for 1.0 files is FFmpeg's H263 decoder, you can use it with the <option>-vc ffh263</option> option. For 2.0 files, use the Win32 DLL through the <option>-vc vivo</option> option. If you do not supply command line options <application>MPlayer</application> selects the best codec automatically. </para> </sect3> <sect3 id="mpeg12"> <title>MPEG 1/2 video</title> <para> MPEG1 and MPEG2 are decoded by the multiplatform native <systemitem class="library">libmpeg2</systemitem> library, whose source code is included in <application>MPlayer</application>. We handle buggy MPEG 1/2 video files by catching <systemitem>Signal 11</systemitem> (<systemitem>segmentation fault</systemitem>), and quickly reinitializing the codec, continuing exactly from where the failure occurred. This recovery technique has no measurable speed penalty. </para> </sect3> <sect3 id="msvideo1"> <title>MS Video1</title> <para> This is a very old and very bad codec from Microsoft. In the past it was decoded with the <filename>msvidc32.dll</filename> Win32 codec, now we have our own open source implementation (by <ulink url="mailto:melanson@pcisys.net">Mike Melanson</ulink>). </para> </sect3> <sect3 id="cinepak-cvid"> <title>Cinepak CVID</title> <para> <application>MPlayer</application> uses its own open source, multiplatform Cinepak decoder (by <ulink url="mailto:timf@csse.monash.edu.au">Dr. Tim Ferguson</ulink>) by default. It supports YUV outputs, so that hardware scaling is possible if the video output driver permits it. </para> </sect3> <sect3 id="realvideo"> <title>RealVideo</title> <para> <application>MPlayer</application> supports decoding all versions of RealVideo: <itemizedlist> <listitem><simpara> RealVideo 1.0, 2.0 (fourcc RV10, RV20) - en/decoding supported by <systemitem class="library">libavcodec</systemitem> </simpara></listitem> <listitem><simpara> RealVideo 3.0, 4.0 (fourcc RV30, RV40) - decoding supported by <emphasis role="bold">RealPlayer libraries</emphasis> </simpara></listitem> </itemizedlist> </para> <para> It is recommended to download and install <application>RealPlayer8</application> or <application>RealONE</application>, because <application>MPlayer</application> can use their libraries to decode files with RealVideo 2.0 - 4.0 video. The <application>MPlayer</application> <filename>configure</filename> script should detect the <application>RealPlayer</application> libraries in the standard locations of a full installation. If it does not, tell <filename>configure</filename> where to look with the <option>--with-reallibdir</option> option. </para> <para> As a second chance you can download the codecs from <ulink url="http://www.mplayerhq.hu/MPlayer/releases/codecs/">http://www.mplayerhq.hu/MPlayer/releases/codecs/</ulink>. After downloading the Real codecs package, extract it to the <filename class="directory">/usr/local/lib/codecs</filename> directory, or you can specify a unique path with the <option>--with-reallibdir</option> option. </para> <note><para> <application>RealPlayer</application> libraries currently <emphasis role="bold">only work with Linux, FreeBSD, NetBSD and Cygwin on the x86, Alpha and PowerPC (Linux/Alpha and Linux/PowerPC have been tested) platforms</emphasis>. </para></note> </sect3> <sect3 id="xvid"> <title>XviD</title> <para> <ulink url="http://www.xvid.org">XviD</ulink> is a forked development of the OpenDivX codec. It happened when ProjectMayo changed OpenDivX to closed source DivX4 (now DivX5), and the non-ProjectMayo people working on OpenDivX got angry, then started XviD. So both projects have the same origin. <itemizedlist> <title>ADVANTAGES</title> <listitem><simpara> open source </simpara></listitem> <listitem><simpara> its API is compatible with DivX4 so adding support for it is easy </simpara></listitem> <listitem><simpara> 2-pass encoding support </simpara></listitem> <listitem><simpara> nice encoding quality, higher speed than DivX4 (you can optimize it for your box while compiling) </simpara></listitem> </itemizedlist> <itemizedlist> <title>DISADVANTAGES</title> <listitem><simpara> currently it does not properly <emphasis role="bold">decode</emphasis> all DivX/DivX4 files (no problem as <link linkend="ffmpeg"><systemitem class="library">libavcodec</systemitem></link> can play them) </simpara></listitem> <listitem><simpara> under development </simpara></listitem> </itemizedlist> </para> <procedure> <title>INSTALLING XVID CVS</title> <para> It is currently available only from CVS. Here are download and installation instructions (you need at least autoconf 2.50, automake and libtool): </para> <step><para> <screen>cvs -z3 -d:pserver:anonymous@cvs.xvid.org:/xvid login</screen> </para></step> <step><para> <screen>cvs -z3 -d:pserver:anonymous@cvs.xvid.org:/xvid co xvidcore</screen> </para></step> <step><para> <screen>cd xvidcore/build/generic</screen> </para></step> <step><para> <screen>./bootstrap.sh</screen> </para></step> <step><para> <screen>./configure</screen> You may have to add some options (examine the output of <screen>./configure --help</screen>). </para></step> <step><para> <screen>make && make install</screen> </para></step> <step><para> If you specified <option>--enable-divxcompat</option>, copy <filename>../../src/divx4.h</filename> to <filename class="directory">/usr/local/include/</filename>. </para></step> <step><para> Recompile <application>MPlayer</application> with <option>--with-xvidlibdir=<replaceable>/path/to/</replaceable>libxvidcore.a</option> <option>--with-xvidincdir=<replaceable>/path/to/</replaceable>xvid.h</option> </para></step> </procedure> </sect3> <sect3 id="sorenson"> <title>Sorenson</title> <para> Sorenson is a video codec developed by Sorenson Media and licensed to Apple who distribute it with their <application>QuickTime Player</application>. We are currently able to decode all version of Sorenson video files with the following decoders: </para> <itemizedlist> <listitem><simpara> Sorenson Video v1 (fourcc <emphasis>SVQ1</emphasis>) - decoding supported by <emphasis role="bold">native codec</emphasis> (<link linkend="ffmpeg"><systemitem class="library">libavcodec</systemitem></link>) </simpara></listitem> <listitem><simpara> Sorenson Video v3 (fourcc <emphasis>SVQ3</emphasis>) - decoding supported by <emphasis role="bold">native codec</emphasis> (<link linkend="ffmpeg"><systemitem class="library">libavcodec</systemitem></link>) </simpara></listitem> </itemizedlist> <procedure> <title>COMPILING MPLAYER WITH QUICKTIME LIBRARIES SUPPORT</title> <note><para>currently only 32bit Intel platforms are supported.</para></note> <step><para>download <application>MPlayer</application> CVS</para></step> <step><para>download QuickTime DLL pack from <ulink url="http://www.mplayerhq.hu/MPlayer/releases/codecs/"/> </para></step> <step><para>extract QuickTime DLL pack to your Win32 codecs directory (default: <filename class="directory">/usr/local/lib/codecs/</filename>) </para></step> <step><para>compile <application>MPlayer</application></para></step> </procedure> </sect3> </sect2> <!-- ********** --> <sect2 id="audio-codecs"> <title>Audio codecs</title> <itemizedlist> <title>The most important audio codecs above all:</title> <listitem><simpara> MPEG layer 1/2/3 (MP1/2/3) audio (<emphasis role="bold">native</emphasis> code, with MMX/SSE/3DNow! optimization) </simpara></listitem> <listitem><simpara> Windows Media Audio 7 and 8 (aka WMAv1 and WMAv2) (<emphasis role="bold">native</emphasis> code, with <link linkend="ffmpeg"><systemitem class="library">libavcodec</systemitem></link>) </simpara></listitem> <listitem><simpara> Windows Media Audio 9 (WMAv3) (using DMO DLL) </simpara></listitem> <listitem><simpara> AC3 Dolby audio (<emphasis role="bold">native</emphasis> code, with MMX/SSE/3DNow! optimization) </simpara></listitem> <listitem><simpara> AC3 passing through soundcard hardware </simpara></listitem> <listitem><simpara> AAC </simpara></listitem> <listitem><simpara> Ogg Vorbis audio codec (<emphasis role="bold">native</emphasis> library) </simpara></listitem> <listitem><simpara> RealAudio: DNET (low bitrate AC3), Cook, Sipro and ATRAC3 </simpara></listitem> <listitem><simpara> QuickTime: Qualcomm and QDesign audio codecs </simpara></listitem> <listitem><simpara> VIVO audio (g723, Vivo Siren) </simpara></listitem> <listitem><simpara> Voxware audio (using DirectShow DLL) </simpara></listitem> <listitem><simpara> alaw and ulaw, various gsm, adpcm and pcm formats and other simple old audio codecs </simpara></listitem> </itemizedlist> <sect3 id="swac3"> <title>Software AC3 decoding</title> <para> This is the default decoder used for files with AC3 audio. </para> <para> The AC3 decoder can create audio output mixes for 2, 4, or 6 speakers. When configured for 6 speakers, this decoder provides separate output of all the AC3 channels to the sound driver, allowing for full "surround sound" experience without the external AC3 decoder required to use the hwac3 codec. </para> <para> Use the <option>-channels</option> option to select the number of output channels. Use <option>-channels 2</option> for a stereo downmix. For a 4 channel downmix (Left Front, Right Front, Left Surround and Right Surround outputs), use <option>-channels 4</option>. In this case, any center channel will be mixed equally to the front channels. <option>-channels 6</option> will output all the AC3 channels as they are encoded - in the order Left, Right, Left Surround, Right Surround, Center and LFE. </para> <para> The default number of output channels is 2. </para> <para> To use more than 2 output channels, you will need to use OSS, and have a sound card that supports the appropriate number of output channels via the SNDCTL_DSP_CHANNELS ioctl. An example of a suitable driver is emu10k1 (used by Soundblaster Live! cards) from August 2001 or newer (ALSA CVS is also supposed to work). </para> </sect3> <sect3 id="hwac3"> <title>Hardware AC3 decoding</title> <para> You need an AC3 capable sound card, with digital out (SP/DIF). The card's driver must properly support the AFMT_AC3 format (C-Media does). Connect your AC3 decoder to the SP/DIF output, and use the <option>-ac hwac3</option> option. It is experimental but known to work with C-Media cards and Soundblaster Live! + ALSA (but not OSS) drivers and DXR3/Hollywood+ MPEG decoder cards. </para> </sect3> <sect3 id="libmad"> <title>libmad support</title> <para> <ulink url="http://mad.sourceforge.net">libmad</ulink> is a multiplatform, integer (internally 24bit PCM) only MPEG audio decoding library. It does not handle broken files well, and it sometimes has problems with seeking, but it may perform better on FPU-less (such as <link linkend="arm">ARM</link>) platform than mp3lib. </para> <para> To enable support, compile with the <option>--enable-mad</option> configure option. </para> </sect3> <sect3 id="vivo-audio"> <title>VIVO audio</title> <para> The audio codec used in VIVO files depends on whether it is a VIVO/1.0 or VIVO/2.0 file. VIVO/1.0 files have <emphasis role="bold">g.723</emphasis> audio, and VIVO/2.0 files have <emphasis role="bold">Vivo Siren</emphasis> audio. Both are supported. </para> </sect3> <sect3 id="realaudio"> <title>RealAudio</title> <para> <application>MPlayer</application> supports decoding nearly all versions of RealAudio: </para> <itemizedlist> <listitem><simpara> RealAudio DNET - decoding supported by <systemitem class="library">liba52</systemitem> </simpara></listitem> <listitem><simpara> RealAudio Cook/Sipro/ATRAC3 - decoding supported by <emphasis role="bold">RealPlayer libraries</emphasis> </simpara></listitem> </itemizedlist> <para> On how to install RealPlayer libraries, see the <link linkend="realmedia">RealMedia file format</link> section. </para> </sect3> <sect3 id="qdesign"> <title>QDesign codecs</title> <para> QDesign audio streams (fourcc:<emphasis>QDMC, QDM2</emphasis>) are found in MOV/QT files. Both versions of this codec can be decoded with QuickTime libraries. For installation instructions please see the <link linkend="sorenson">Sorenson video codec</link> section. </para> </sect3> <sect3 id="qualcomm"> <title>Qualcomm codecs</title> <para> Qualcomm audio streams (fourcc:<emphasis>Qclp</emphasis>) is found in MOV/QT files. It can be decoded with QuickTime libraries. For installation instructions please see the <link linkend="sorenson">Sorenson video codec</link> section. </para> </sect3> <sect3 id="aac"> <title>AAC codec</title> <para> AAC (Advanced Audio Coding) is an audio codec sometimes found in MOV and MP4 files. An open source decoder called FAAD is available from <ulink url="http://www.audiocoding.com"/>. <application>MPlayer</application> includes libfaad 2.0RC1, so you do not need to get it separately. </para> <para> If you use gcc 3.2 which fails to compile our internal FAAD or want to use the external library for some other reason, download the library from the <ulink url="http://www.audiocoding.com/download.php">download page</ulink> and pass <option>--with-externalfaad</option> to <filename>configure</filename>. You do not need all of faad2 to decode AAC files, libfaad is enough. Build it like this: <screen> cd faad2/ chmod +x bootstrap ./bootstrap ./configure cd libfaad make make install </screen> Binaries are not available from audiocoding.com, but you can (apt-)get Debian packages from <ulink url="http://marillat.free.fr">Christian Marillat's homepage</ulink>, Mandrake RPMs from the <ulink url="http://plf.zarb.org">P.L.F</ulink> and RedHat RPMs from <ulink url="http://www.piorunek.pl/~dominik/">Dominik Mierzejewski's homepage</ulink>. </para> </sect3> </sect2> <!-- ********** --> <sect2 id="win32-codecs"> <title>Win32 codecs importing HOWTO</title> <!-- TODO: a short paragraph of text would be nice here... --> <sect3 id="vfw-codecs"> <title>VFW codecs</title> <para> VFW (Video for Windows) is the old Video API for Windows. Its codecs have the <filename>.DLL</filename> or (rarely) <filename>.DRV</filename> extension. If <application>MPlayer</application> fails at playing your AVI with this kind of message: <screen>UNKNOWN video codec: HFYU (0x55594648)</screen> </para> <para> It means your AVI is encoded with a codec which has the HFYU fourcc (HFYU = HuffYUV codec, DIV3 = DivX Low Motion, etc.). Now that you know this, you have to find out which DLL Windows loads in order to play this file. In our case, the <filename>system.ini</filename> contains this information in a line that reads: <programlisting>VIDC.HFYU=huffyuv.dll</programlisting> </para> <para> So you need the <filename>huffyuv.dll</filename> file. Note that the audio codecs are specified by the MSACM prefix: <programlisting>msacm.l3acm=L3codeca.acm</programlisting> </para> <para> This is the MP3 codec. Now that you have all the necessary information (fourcc, codec file, sample AVI), submit your codec support request by mail, and upload these files to the FTP site: <systemitem role="url"> ftp://ftp.mplayerhq.hu/MPlayer/incoming/[codecname]/ </systemitem> </para> <note><para>On Windows NT/2000/XP search for this info in the registry, e.g. search for "VIDC.HFYU". To find out how to do this, look at the old DirectShow method below. </para></note> </sect3> <sect3 id="dshow-codecs"> <title>DirectShow codecs</title> <para> DirectShow is the newer Video API, which is even worse than its predecessor. Things are harder with DirectShow, since <itemizedlist> <listitem><simpara> <filename>system.ini</filename> does not contain the needed information, instead it is stored in the registry and </simpara></listitem> <listitem><simpara> we need the GUID of the codec. </simpara></listitem> </itemizedlist> </para> <procedure> <title>New Method:</title> <para> Using <application>Microsoft GraphEdit</application> (fast) </para> <step><para> Get <application>GraphEdit</application> from either DirectX SDK or <ulink url="http://doom9.org">doom9</ulink> </para></step> <step><para> Start <command>graphedit.exe</command>. </para></step> <step><para> From the menu select Graph -> Insert Filters. </para></step> <step><para> Expand item <systemitem>DirectShow Filters</systemitem> </para></step> <step><para> Select the right codec name and expand item. </para></step> <step><para> In the entry <systemitem>DisplayName</systemitem> look at the text in winged brackets after the backslash and write it down (five dash-delimited blocks, the GUID). </para></step> <step><para> The codec binary is the file specified in the <systemitem>Filename</systemitem> entry. </para></step> </procedure> <note> <para> If there is no <systemitem>Filename</systemitem> and <systemitem>DisplayName</systemitem> contains something like <systemitem>device:dmo</systemitem>, then it is a DMO-Codec. </para> </note> <procedure> <title>Old Method:</title> <para> Take a deep breath and start searching the registry... </para> <step><para> Start <command>regedit</command>. </para></step> <step><para> Press <keycap>Ctrl</keycap>+<keycap>F</keycap>, disable the first two checkboxes, and enable the third. Type in the fourcc of the codec (e.g. <userinput>TM20</userinput>). </para></step> <step><para> You should see a field which contains the path and the filename (e.g. <filename>C:\WINDOWS\SYSTEM\TM20DEC.AX</filename>). </para></step> <step><para> Now that you have the file, we need the GUID. Try searching again, but now search for the codec's name, not the fourcc. Its name can be acquired when Media Player is playing the file, by checking <guimenu>File</guimenu> -> <guisubmenu>Properties</guisubmenu> -> <guimenuitem>Advanced</guimenuitem>. If not, you are out of luck. Try guessing (e.g. search for TrueMotion). </para></step> <step><para> If the GUID is found you should see a <guilabel>FriendlyName</guilabel> and a <guilabel>CLSID</guilabel> field. Write down the 16 byte CLSID, this is the GUID we need. </para></step> </procedure> <note> <para> If searching fails, try enabling all the checkboxes. You may have false hits, but you may get lucky... </para> </note> <para> Now that you have all the necessary information (fourcc, GUID, codec file, sample AVI), submit your codec support request by mail, and upload these files to the FTP site: <systemitem role="url">ftp://ftp.mplayerhq.hu/MPlayer/incoming/[codecname]/ </systemitem> </para> </sect3> </sect2> </sect1>