view Makefile @ 22830:1d4a455af876

Set CONFIG_EBP_AVAILABLE, CONFIG_EBX_AVAILABLE for FFmpeg After FFmpeg r8549 these variables are used in libavcodec to determine whether x86 inline asm sections using these registers or requiring a certain total number of total free registers are enabled. Because they were not set by MPlayer configure some H264 decoding optimizations were disabled after that FFmpeg version. This change sets the variables to true unconditionally which should restore previous behavior. Adding proper detection is left for later. EBX should always be available because internal libavcodec is never compiled with PIC. However if -fomit-frame-pointer is not used because of --enable-debug then EBP is not available. Thus proper detection would be preferable to fix compilation with --enable-debug on x86. Currently the variables are also set on non-x86 which should be harmless even if somewhat ugly.
author uau
date Fri, 30 Mar 2007 22:57:04 +0000
parents 98eaf29b5dee
children 2e506e1c8d85
line wrap: on
line source

# LINUX Makefile made by A'rpi / Astral
# Some cleanup by LGB: 	* 'make -C dir' instead of 'cd dir;make;cd..'
#			* for loops instead of linear sequence of make directories
#			* some minor problems with make clean and distclean were corrected
#			* DVD support

include config.mak

CFLAGS = -I. -I./libavutil $(OPTFLAGS)

CFLAGS-$(CONFIG_LIBAVCODEC) += -I./libavcodec
CFLAGS                      += $(CFLAGS-yes)

COMMON_LDFLAGS += $(EXTRA_LIB)\
                  $(EXTRALIBS) \

LDFLAGS_MPLAYER = $(EXTRALIBS_MPLAYER) \
                  $(COMMON_LDFLAGS) \

LDFLAGS_MENCODER = $(EXTRALIBS_MENCODER) \
                   $(COMMON_LDFLAGS) \

SRCS_COMMON = asxparser.c \
              codec-cfg.c \
              cpudetect.c \
              edl.c \
              find_sub.c \
              m_config.c \
              m_option.c \
              m_struct.c \
              mpcommon.c \
              parser-cfg.c \
              playtree.c \
              playtreeparser.c \
              spudec.c \
              sub_cc.c \
              subreader.c \
              vobsub.c \

SRCS_COMMON-$(UNRARLIB) += unrarlib.c

SRCS_MPLAYER = mplayer.c \
               m_property.c \
               mp_fifo.c \
               mp_msg.c \
               mixer.c \
               parser-mpcmd.c \
               subopt-helper.c \
               command.c \

SRCS_MENCODER = mencoder.c \
                mp_msg-mencoder.c \
                parser-mecmd.c \
                xvid_vbr.c \

COMMON_LIBS = libmpcodecs/libmpcodecs.a \
              libaf/libaf.a \
              libmpdemux/libmpdemux.a \
              stream/stream.a \
              libswscale/libswscale.a \
              libvo/libosd.a \

COMMON_LIBS-$(CONFIG_LIBAVFORMAT) += libavformat/libavformat.a
COMMON_LIBS-$(CONFIG_LIBAVCODEC)  += libavcodec/libavcodec.a
COMMON_LIBS-$(CONFIG_LIBAVUTIL)   += libavutil/libavutil.a
COMMON_LIBS-$(CONFIG_LIBPOSTPROC) += libpostproc/libpostproc.a
COMMON_LIBS-$(WIN32DLL)           += loader/libloader.a
COMMON_LIBS-$(MP3LIB)             += mp3lib/libmp3.a
COMMON_LIBS-$(LIBA52)             += liba52/liba52.a
COMMON_LIBS-$(LIBMPEG2)           += libmpeg2/libmpeg2.a
COMMON_LIBS-$(FAAD_INTERNAL)      += libfaad2/libfaad2.a
COMMON_LIBS-$(TREMOR_INTERNAL)    += tremor/libvorbisidec.a
COMMON_LIBS-$(DVDREAD_INTERNAL)   += dvdread/libdvdread.a
COMMON_LIBS-$(DVDCSS_INTERNAL)    += libdvdcss/libdvdcss.a
COMMON_LIBS-$(CONFIG_ASS)         += libass/libass.a

LIBS_MPLAYER = libvo/libvo.a \
               libao2/libao2.a \
               input/libinput.a \

LIBS_MPLAYER-$(VIDIX)             += vidix/libvidix.a
LIBS_MPLAYER-$(GUI)               += Gui/libgui.a
LIBS_MPLAYER-$(LIBMENU)           += libmenu/libmenu.a

LIBS_MENCODER = libmpcodecs/libmpencoders.a \
                libmpdemux/libmpmux.a \

# Having this in libosdep.a is not enough.
OBJS_MPLAYER-$(TARGET_WIN32) += osdep/mplayer-rc.o

ALL_PRG-$(MPLAYER)  += mplayer$(EXESUF)
ALL_PRG-$(MENCODER) += mencoder$(EXESUF)

SRCS_COMMON  += $(SRCS_COMMON-yes)
COMMON_LIBS  += $(COMMON_LIBS-yes)
LIBS_MPLAYER += $(LIBS_MPLAYER-yes)
OBJS_MPLAYER += $(OBJS_MPLAYER-yes)
PARTS        += $(PARTS-yes)
ALL_PRG      += $(ALL_PRG-yes)

OBJS_COMMON   = $(SRCS_COMMON:.c=.o)
OBJS_MPLAYER  = $(SRCS_MPLAYER:.c=.o)
OBJS_MENCODER = $(SRCS_MENCODER:.c=.o)

COMMON_LIBS += osdep/libosdep.a

MPLAYER_DEPS  = $(OBJS_MPLAYER)  $(OBJS_COMMON) $(LIBS_MPLAYER)  $(COMMON_LIBS)
MENCODER_DEPS = $(OBJS_MENCODER) $(OBJS_COMMON) $(LIBS_MENCODER) $(COMMON_LIBS)

INSTALL_TARGETS-$(MPLAYER)  += install-mplayer  install-mplayer-man
INSTALL_TARGETS-$(MENCODER) += install-mencoder install-mplayer-man
INSTALL_TARGETS-$(GUI)      += install-gui
INSTALL_TARGETS-$(VIDIX)    += install-vidix
INSTALL_TARGETS             += $(INSTALL_TARGETS-yes)

PARTS = libmpdemux \
        stream \
        libmpcodecs \
        libavutil \
        libavcodec \
        libpostproc \
        libavformat \
        libswscale \
        libao2 \
        osdep \
        input \
        libvo \
        libaf \
        liba52 \
        libavcodec \
        libavformat \
        libpostproc \
        loader \
        mp3lib \
        libmpeg2 \
        libfaad2 \
        tremor \
        libdha \
        vidix \
        vidix/drivers \
        dvdread \
        libdvdcss \
        libass \
        Gui \
        libmenu \


all:	$(ALL_PRG)

libaf/libaf.a:
	$(MAKE) -C libaf

dvdread/libdvdread.a:
	$(MAKE) -C dvdread

libdvdcss/libdvdcss.a:
	$(MAKE) -C libdvdcss

loader/libloader.a:
	$(MAKE) -C loader

libass/libass.a:
	$(MAKE) -C libass

libmpdemux/libmpdemux.a:
	$(MAKE) -C libmpdemux libmpdemux.a

libmpdemux/libmpmux.a:
	$(MAKE) -C libmpdemux libmpmux.a

stream/stream.a:
	$(MAKE) -C stream

libmpcodecs/libmpcodecs.a:
	$(MAKE) -C libmpcodecs

libavutil/libavutil.a:
	$(MAKE) -C libavutil LIBPREF=lib LIBSUF=.a

libavcodec/libavcodec.a:
	$(MAKE) -C libavcodec LIBPREF=lib LIBSUF=.a

libpostproc/libpostproc.a:
	$(MAKE) -C libpostproc LIBPREF=lib LIBSUF=.a

libavformat/libavformat.a:
	$(MAKE) -C libavformat LIBPREF=lib LIBSUF=.a

libswscale/libswscale.a:
	$(MAKE) -C libswscale LIBPREF=lib LIBSUF=.a

libmpeg2/libmpeg2.a:
	$(MAKE) -C libmpeg2

libvo/libvo.a:
	$(MAKE) -C libvo libvo.a

libvo/libosd.a:
	$(MAKE) -C libvo libosd.a

libao2/libao2.a:
	$(MAKE) -C libao2

liba52/liba52.a:
	$(MAKE) -C liba52

libfaad2/libfaad2.a:
	$(MAKE) -C libfaad2

mp3lib/libmp3.a:
	$(MAKE) -C mp3lib

tremor/libvorbisidec.a:
	$(MAKE) -C tremor

libdha/libdha.so:
	$(MAKE) -C libdha

vidix/libvidix.a: libdha/libdha.so
	$(MAKE) -C vidix
	$(MAKE) -C vidix/drivers

Gui/libgui.a:
	$(MAKE) -C Gui

osdep/libosdep.a:
	$(MAKE) -C osdep

osdep/mplayer-rc.o:
	$(MAKE) -C osdep mplayer-rc.o

input/libinput.a:
	$(MAKE) -C input

libmenu/libmenu.a:
	$(MAKE) -C libmenu

mplayer$(EXESUF): $(MPLAYER_DEPS)
	$(CC) -o $@ $^ $(LDFLAGS_MPLAYER)

mencoder$(EXESUF): $(MENCODER_DEPS)
	$(CC) -o $@ $^ $(LDFLAGS_MENCODER)

codec-cfg$(EXESUF): codec-cfg.c codec-cfg.h help_mp.h
	$(HOST_CC) -I. -DCODECS2HTML $< -o $@

codecs.conf.h: codec-cfg$(EXESUF) etc/codecs.conf
	./codec-cfg$(EXESUF) ./etc/codecs.conf > $@

codec-cfg.o: codecs.conf.h

codecs2html$(EXESUF): mp_msg.o
	$(CC) -DCODECS2HTML codec-cfg.c $^ -o $@

codec-cfg-test$(EXESUF): codecs.conf.h codec-cfg.h mp_msg.o osdep/getch2.o
	$(CC) -I. -DTESTING codec-cfg.c mp_msg.o osdep/getch2.o -ltermcap -o $@

install: install-dirs $(INSTALL_TARGETS)

install-dirs:
	$(INSTALL) -d $(BINDIR)
	$(INSTALL) -d $(DATADIR)
	$(INSTALL) -d $(MANDIR)/man1
	$(INSTALL) -d $(CONFDIR)
	if test -f $(CONFDIR)/codecs.conf ; then mv -f $(CONFDIR)/codecs.conf $(CONFDIR)/codecs.conf.old ; fi

install-mplayer: mplayer$(EXESUF)
	$(INSTALL) -m 755 $(INSTALLSTRIP) mplayer$(EXESUF) $(BINDIR)

install-mplayer-man:
	for i in $(MAN_LANG); do \
		if test "$$i" = en ; then \
			$(INSTALL) -c -m 644 DOCS/man/en/mplayer.1 $(MANDIR)/man1/ ; \
		else \
			$(INSTALL) -d $(MANDIR)/$$i/man1 ; \
			$(INSTALL) -c -m 644 DOCS/man/$$i/mplayer.1 $(MANDIR)/$$i/man1/ ; \
		fi ; \
	done

install-mencoder: mencoder$(EXESUF)
	$(INSTALL) -m 755 $(INSTALLSTRIP) mencoder$(EXESUF) $(BINDIR)
	for i in $(MAN_LANG); do \
		if test "$$i" = en ; then \
			cd $(MANDIR)/man1 && ln -sf mplayer.1 mencoder.1 ; \
		else \
			cd $(MANDIR)/$$i/man1 && ln -sf mplayer.1 mencoder.1 ; \
		fi ; \
	done

install-gui:
	-ln -sf mplayer$(EXESUF) $(BINDIR)/gmplayer$(EXESUF)
	$(INSTALL) -d $(DATADIR)/skins
	@echo "*** Download skin(s) at http://www.mplayerhq.hu/design7/dload.html"
	@echo "*** for GUI, and extract to $(DATADIR)/skins/"
	$(INSTALL) -d $(prefix)/share/pixmaps
	$(INSTALL) -m 644 etc/mplayer.xpm $(prefix)/share/pixmaps/
	$(INSTALL) -d $(prefix)/share/applications
	$(INSTALL) -m 644 etc/mplayer.desktop $(prefix)/share/applications/

install-vidix:
	$(MAKE) -C libdha install
	mkdir -p $(LIBDIR)/mplayer/vidix
	$(INSTALL) -m 755 $(INSTALLSTRIP) -p vidix/drivers/*.so $(LIBDIR)/mplayer/vidix

uninstall:
	-rm -f $(BINDIR)/mplayer$(EXESUF) $(BINDIR)/gmplayer$(EXESUF)
	-rm -f $(BINDIR)/mencoder$(EXESUF)
	-rm -f $(MANDIR)/man1/mencoder.1 $(MANDIR)/man1/mplayer.1
	-rm -f $(prefix)/share/pixmaps/mplayer.xpm
	-rm -f $(prefix)/share/applications/mplayer.desktop
	for l in $(MAN_LANG); do \
	  if test "$$l" != "en"; then \
	    rm -f $(MANDIR)/$$l/man1/mplayer.1    \
	          $(MANDIR)/$$l/man1/mencoder.1   \
	          $(MANDIR)/$$l/man1/gmplayer.1 ; \
	  fi ; \
	done
	$(MAKE) -C libdha uninstall
	rm -f $(LIBDIR)/mplayer/vidix/*.so
	-rmdir -p $(LIBDIR)/mplayer/vidix

dep depend: help_mp.h version.h codecs.conf.h
	$(CC) -MM $(CFLAGS) $(SRCS_MPLAYER) $(SRCS_MENCODER) $(SRCS_COMMON) 1>.depend
	@for a in $(PARTS); do $(MAKE) -C $$a dep; done

clean:
	-rm -f *.o *.a *~
	-rm -f mplayer$(EXESUF) mencoder$(EXESUF) codec-cfg$(EXESUF) \
	  codecs2html$(EXESUF) codec-cfg-test$(EXESUF) \
	  codecs.conf.h help_mp.h version.h
	@for a in $(PARTS); do $(MAKE) -C $$a clean; done

distclean: clean doxygen_clean
	@for a in $(PARTS); do $(MAKE) -C $$a distclean; done
	-rm -f .depend configure.log config.mak config.h

strip:
	strip -s $(ALL_PRG)

# ./configure must be rerun if it changed
config.h: configure
	@echo "############################################################"
	@echo "####### Please run ./configure again - it's changed! #######"
	@echo "############################################################"

# rebuild at every config.h/config.mak/Makefile change:
version.h: config.h config.mak Makefile
	./version.sh `$(CC) -dumpversion`

doxygen:
	doxygen DOCS/tech/Doxyfile

doxygen_clean:
	-rm -rf DOCS/tech/doxygen

help_mp.h: help/help_mp-en.h $(HELP_FILE)
	@echo '// WARNING! This is a generated file. Do NOT edit.' > help_mp.h
	@echo '// See the help/ subdir for the editable files.' >> help_mp.h
ifeq ($(CHARSET),)
	@echo '#include "$(HELP_FILE)"' >> help_mp.h
else
	iconv -f UTF-8 -t $(CHARSET) "$(HELP_FILE)" >> help_mp.h
endif

ifneq ($(HELP_FILE),help/help_mp-en.h)
	@echo "Adding untranslated messages to help_mp.h"
	@echo '// untranslated messages from the English master file:' >> help_mp.h
	@help/help_diff.sh $(HELP_FILE) < help/help_mp-en.h >> help_mp.h
endif

# explicit dependencies to force version.h to be built even if .depend is missing
mplayer.o mencoder.o vobsub.o: version.h

# temporary measure to make sure help_mp.h is built. we desperately need correct deps!
$(MPLAYER_DEPS) $(MENCODER_DEPS): help_mp.h

#
# the following lines provide _partial_ dependency information
# for the 'library' directories under main dir, in order to cause
# the build process to recursively descend into them if something
# has changed. ideally this will be replaced with a single
# nonrecursive makefile for the whole project.
#
# Now all directories are recursed by default because these rules do not
# consider dependencies on files in other directories, while the recursively
# invoked Makefiles do. Conditional recursion only to the directories with
# changed files can be enabled by creating a file named ".norecurse" and
# optionally giving it a timestamp in the past. Directories whose .a files
# are newer than the timestamp and newer than other files in the directory
# will not be recursed.
.norecurse:

libvo/libvo.a: .norecurse $(wildcard libvo/*.[ch])
libvo/libosd.a: .norecurse $(wildcard libvo/*.[ch])
libao2/libao2.a: .norecurse $(wildcard libao2/*.[ch])
osdep/libosdep.a: .norecurse $(wildcard osdep/*.[ch])
input/libinput.a: .norecurse $(wildcard input/*.[ch])

libmenu/libmenu.a: .norecurse $(wildcard libmenu/*.[ch])
libaf/libaf.a: .norecurse $(wildcard libaf/*.[ch])
dvdread/libdvdread.a: .norecurse $(wildcard dvdread/*.[ch])
libdvdcss/libdvdcss.a: .norecurse $(wildcard libdvdcss/*.[ch])

libmpdemux/libmpdemux.a: .norecurse $(wildcard libmpdemux/*.[ch])
libmpdemux/libmpmux.a: .norecurse $(wildcard libmpdemux/*.[ch])
stream/stream.a: .norecurse $(wildcard stream/*.[ch] stream/*/*.[ch])
libmpcodecs/libmpcodecs.a: .norecurse $(wildcard libmpcodecs/*.[ch]) $(wildcard libmpcodecs/native/*.[ch])
libmpcodecs/libmpencoders.a: .norecurse $(wildcard libmpcodecs/*.[ch])

libavutil/libavutil.a: .norecurse $(wildcard libavutil/*.[ch])
libavcodec/libavcodec.a: .norecurse $(wildcard libavcodec/*.[ch] libavcodec/*/*.[chS])
libavformat/libavformat.a: .norecurse $(wildcard libavformat/*.[ch])
libswscale/libswscale.a: .norecurse $(wildcard libswscale/*.[ch])

libmpeg2/libmpeg2.a: .norecurse $(wildcard libmpeg2/*.[ch])
liba52/liba52.a: .norecurse $(wildcard liba52/*.[ch])
mp3lib/libmp3.a: .norecurse $(wildcard mp3lib/*.[ch])
libfaad2/libfaad2.a: .norecurse $(wildcard libfaad2/*.[ch] libfaad2/*/*.[ch])

loader/libloader.a: .norecurse $(wildcard loader/*.[chSs])
libdha/libdha.so: .norecurse $(wildcard libdha/*.[ch])
vidix/libvidix.a: .norecurse $(wildcard vidix/*.[ch])
Gui/libgui.a: .norecurse $(wildcard Gui/*.[ch] Gui/*/*.[ch] Gui/*/*/*.[ch])

libass/libass.a: .norecurse $(wildcard libass/*.[ch])

-include .depend

.PHONY: all install* uninstall clean distclean strip dep depend
.PHONY: doxygen doxygen_clean