view libmpcodecs/vd_sgi.c @ 24590:2c238fa777ff

ao_alsa: Fix get_space() return values larger than buffersize After a buffer underrun the ALSA get_space() function sometimes returned values larger than the ao had set in ao_data.buffersize. Fix this by replacing the old check against MAX_OUTBURST by one against ao_data.buffersize. There should be no need for the MAX_OUTBURST check; the current MPlayer side should no longer have any constant limit on the amount of data an ao can buffer or request at once. The get_space() values larger than ao_data.buffersize triggered errors in audio decoding causing the current attempt to fill audio buffers to be aborted. I'm not sure how often that caused behavior noticeably worse then an underrun already is.

/*
 * author: Todd Kirby <[e-mail]>
 */

#include <stdio.h>
#include <stdlib.h>

#include "config.h"
#include "mp_msg.h"
#include "libavutil/common.h"
#include "mpbswap.h"
#include "vd_internal.h"

#define SGI_HEADER_LEN 512
#define SGI_MAGIC 474

#define SGI_GRAYSCALE_IMAGE 1
#define SGI_RGB_IMAGE 3
#define SGI_RGBA_IMAGE 4

#define OUT_PIXEL_STRIDE 3 /* RGB */


static vd_info_t info =
{
  "SGI Image decoder",
  "sgi",
  "Todd Kirby",
  "Todd Kirby",
  ""
};

LIBVD_EXTERN(sgi)

typedef struct {
  short magic;
  char rle;
  char bytes_per_channel;
  unsigned short dimension;
  unsigned short xsize;
  unsigned short ysize;
  unsigned short zsize;
} SGIInfo;

static unsigned int outfmt = IMGFMT_BGR24;

static unsigned short last_x = -1;
static unsigned short last_y = -1;


/* to set/get/query special features/parameters */
static int
control(sh_video_t* sh, int cmd, void *arg, ...)
{ 
  switch (cmd)
  {
    case VDCTRL_QUERY_FORMAT:
      if (*((unsigned int *) arg) == outfmt) {
        return CONTROL_TRUE;
      }
      return CONTROL_FALSE;
  }
  return CONTROL_UNKNOWN;
}


/* init driver */
static int
init(sh_video_t *sh)
{
  sh->context = (SGIInfo *) calloc(1, sizeof(SGIInfo));
  last_x = -1;

  return 1;
}


/* uninit driver */
static void
uninit(sh_video_t *sh)
{
  SGIInfo	*info = sh->context;
  free(info);
}


/* expand an rle row into a channel */
static void
expandrow(unsigned char *optr, unsigned char *iptr, int chan_offset)
{
  unsigned char pixel, count;
  optr += chan_offset;
  
  while (1) {
    pixel = *iptr++;
    
    if (!(count = (pixel & 0x7f))) {
      return;
    }
    if(pixel & 0x80) {
      while (count--) {
        *optr = *iptr;
        optr += OUT_PIXEL_STRIDE;
        iptr++;
      }
    } else {
      pixel = *iptr++;
      
      while (count--) {
        *optr = pixel;
        optr += OUT_PIXEL_STRIDE;
      }
    }
  }
}


/* expand an rle row into all 3 channels.
   a separate function for grayscale so we don't slow down the 
   more common case rgb function with a bunch of ifs. */
static void
expandrow_gs(unsigned char *optr, unsigned char *iptr)
{
  unsigned char pixel, count;
  
  while (1) {
    pixel = *iptr++;
    
    if (!(count = (pixel & 0x7f))) {
      return;
    }
    if(pixel & 0x80) {
      while (count--) {
        optr[0] = *iptr;
        optr[1] = *iptr;
        optr[2] = *iptr;
        optr += OUT_PIXEL_STRIDE;
        iptr++;
      }
    } else {
      pixel = *iptr++;
      
      while (count--) {
        optr[0] = pixel;
        optr[1] = pixel;
        optr[2] = pixel;
        optr += OUT_PIXEL_STRIDE;
      }
    }
  }
}


/* decode a run length encoded sgi image */
static void
decode_rle_sgi(SGIInfo *info, unsigned char *data, mp_image_t *mpi)
{
  unsigned char *rle_data, *dest_row;
  uint32_t *starttab;
  int y, z, xsize, ysize, zsize, chan_offset;
  long start_offset;
  
  xsize = info->xsize;
  ysize = info->ysize;
  zsize = info->zsize;

  /* rle offset table is right after the header */
  starttab = (uint32_t*)(data + SGI_HEADER_LEN); 
  
   for (z = 0; z < zsize; z++) {

     /* set chan_offset so RGB ends up BGR */
     chan_offset = (zsize - 1) - z;
     
     /* The origin for SGI images is the lower-left corner
        so read scan lines from bottom to top */
     for (y = ysize - 1; y >= 0; y--) {
       dest_row = mpi->planes[0] + mpi->stride[0] * (ysize - 1 - y);
    
      /* set start of next run (offsets are from start of header) */
      start_offset = be2me_32(*(uint32_t*) &starttab[y + z * ysize]);
      
      rle_data = &data[start_offset];
    
      if(info->zsize == SGI_GRAYSCALE_IMAGE) {
        expandrow_gs(dest_row, rle_data);
      } else {
        expandrow(dest_row, rle_data, chan_offset);
      }
    }
  }
}

  
/* decode an sgi image */
static void
decode_uncompressed_sgi(SGIInfo *info, unsigned char *data, mp_image_t *mpi)
{
  unsigned char *src_row, *dest_row;
  int x, y, z, xsize, ysize, zsize, chan_offset;
  
  xsize = info->xsize;
  ysize = info->ysize;
  zsize = info->zsize;
  
  /* skip header */ 
  data += SGI_HEADER_LEN;
  
  for (z = 0; z < zsize; z++) {

    /* set row ptr to start of current plane */
    src_row = data + (xsize * ysize * z);

    /* set chan_offset for RGB -> BGR */
    chan_offset = (zsize - 1) - z;
    
    /* the origin for SGI images is the lower-left corner  
       so read scan lines from bottom to top. */
    for (y = ysize - 1; y >= 0; y--) {
      dest_row = mpi->planes[0] + mpi->stride[0] * y;
      for (x = 0; x < xsize; x++) {
        
        /* we only do 24 bit output so promote 8 bit pixels to 24 */
        if (zsize == SGI_GRAYSCALE_IMAGE) {
          /* write greyscale value into all channels */
          dest_row[0] = src_row[x];
          dest_row[1] = src_row[x];
          dest_row[2] = src_row[x];
        } else {
          dest_row[chan_offset] = src_row[x];
        }
        
        dest_row += OUT_PIXEL_STRIDE;
      }

      /* move to next row of the current source plane */
      src_row += xsize;
    }
  }
}


/* read sgi header fields */
static void
read_sgi_header(unsigned char *buf, SGIInfo *info)
{
  /* sgi data is always stored in big endian byte order */
  info->magic = be2me_16(*(unsigned short *) &buf[0]);     
  info->rle = buf[2];
  info->bytes_per_channel = buf[3];
  info->dimension = be2me_16(*(unsigned short *) &buf[4]);     
  info->xsize = be2me_16(*(unsigned short *) &buf[6]);     
  info->ysize = be2me_16(*(unsigned short *) &buf[8]);     
  info->zsize = be2me_16(*(unsigned short *) &buf[10]);     
}


/* decode a frame */
static
mp_image_t *decode(sh_video_t *sh, void *raw, int len, int flags)
{
  SGIInfo *info = sh->context;
  unsigned char *data = raw;
  mp_image_t *mpi;

  if (len <= 0) {
    return NULL; /* skip frame */
  }
    
  read_sgi_header(data, info); 
  
  /* make sure this is an SGI image file */
  if (info->magic != SGI_MAGIC) {
    mp_msg(MSGT_DECVIDEO, MSGL_INFO, "Bad magic number in image.\n");
    return NULL;
  }

  /* check image depth */
  if (info->bytes_per_channel != 1) {
    mp_msg(MSGT_DECVIDEO, MSGL_INFO, 
        "Unsupported bytes per channel value %i.\n", info->bytes_per_channel);
    return NULL;
  }

  /* check image dimension */
  if (info->dimension != 2 && info->dimension != 3) {
    mp_msg(MSGT_DECVIDEO, MSGL_INFO, "Unsupported image dimension %i.\n", 
        info->dimension);
    return NULL;
  }

  /* change rgba images to rgb so alpha channel will be ignored */ 
  if (info->zsize == SGI_RGBA_IMAGE) {
    info->zsize = SGI_RGB_IMAGE;
  }

  /* check image depth */
  if (info->zsize != SGI_RGB_IMAGE && info->zsize != SGI_GRAYSCALE_IMAGE) {
    mp_msg(MSGT_DECVIDEO, MSGL_INFO, "Unsupported image depth.\n");
    return NULL;
  }
  
  /* (re)init libvo if image size is changed */
  if (last_x != info->xsize || last_y != info->ysize)
  {
    last_x = info->xsize;
    last_y = info->ysize;
    
    if (!mpcodecs_config_vo(sh, info->xsize, info->ysize, outfmt)) {
      mp_msg(MSGT_DECVIDEO, MSGL_INFO, "Config vo failed:\n");
      return NULL;
    }
  }
   
  if (!(mpi = mpcodecs_get_image(sh, MP_IMGTYPE_TEMP, MP_IMGFLAG_ACCEPT_STRIDE, 
          info->xsize, info->ysize))) {
    return NULL;
  }
 
  if (info->rle) {
    decode_rle_sgi(info, data, mpi);
  } else {
    decode_uncompressed_sgi(info, data, mpi);
  }
  
  return mpi;
}