view vidix/sysdep/pci_ia64.c @ 37003:2d8157b3b386

Fix the index passed to PutImage() for item type itVPotmeter. Unlike the position for drawing the button (from bottom to top), the index for the phase image has to be in the usual range, i.e. 0 for 0% and numphases - 1 for 100%, so that the phase image can be designed straightforwardly. Fix the parameter although PutImage() currently doesn't work for item type itVPotmeter at all.

/*
   This file is based on:
   $XFree86: xc/programs/Xserver/hw/xfree86/etc/scanpci.c,v 3.34.2.17 1998/11/10 11:55:40 dawes Exp $
   Modified for readability by Nick Kurshev
*/

static int pci_config_type( void )
{
  unsigned long tmplong1, tmplong2;
  unsigned char tmp1, tmp2;
  int retval;
    retval = 0;

    outb(PCI_MODE2_ENABLE_REG, 0x00);
    outb(PCI_MODE2_FORWARD_REG, 0x00);
    tmp1 = inb(PCI_MODE2_ENABLE_REG);
    tmp2 = inb(PCI_MODE2_FORWARD_REG);
    if ((tmp1 == 0x00) && (tmp2 == 0x00)) {
	retval = 2;
        /*printf("PCI says configuration type 2\n");*/
    } else {
        tmplong1 = inl(PCI_MODE1_ADDRESS_REG);
        outl(PCI_MODE1_ADDRESS_REG, PCI_EN);
        tmplong2 = inl(PCI_MODE1_ADDRESS_REG);
        outl(PCI_MODE1_ADDRESS_REG, tmplong1);
        if (tmplong2 == PCI_EN) {
	    retval = 1;
            /*printf("PCI says configuration type 1\n");*/
	} else {
            /*printf("No PCI !\n");*/
	    disable_os_io();
	    /*exit(1);*/
	    retval = 0xFFFF;
	}
    }
  return retval;
}

static int pci_get_vendor(
          unsigned char bus,
          unsigned char dev,
          int func)
{
    unsigned long config_cmd;
    config_cmd = PCI_EN | (bus<<16) | (dev<<11) | (func<<8);
    outl(PCI_MODE1_ADDRESS_REG, config_cmd);
    return inl(PCI_MODE1_DATA_REG);
}

static long pci_config_read_long(
          unsigned char bus,
          unsigned char dev,
          int func,
          unsigned cmd)
{
    unsigned long config_cmd;
    config_cmd = PCI_EN | (bus<<16) | (dev<<11) | (func<<8);
    outl(PCI_MODE1_ADDRESS_REG, config_cmd | cmd);
    return inl(PCI_MODE1_DATA_REG);
}