view Makefile @ 4513:2e3800da1ceb

Switched from libmp1e to libavcodec, at least for me it runs helluva lot faster than libmp1e (high quality divx movies that before ran very poor now plays perfectly). Also includes some minor fixes to the osd support. Since libmp1e has issues with non-mmx system I think this move is a smart one...

# LINUX Makefile made by A'rpi / Astral
# Some cleanup by LGB: 	* 'make -C dir' instead of 'cd dir;make;cd..'
#			* for loops instead of linear sequence of make directories
#			* some minor problems with make clean and distclean were corrected
#			* DVD support

include config.mak

PRG = mplayer
PRG_HQ = mplayerHQ
PRG_AVIP = aviparse
PRG_FIBMAP = fibmap_mplayer
PRG_TV = tvision
PRG_CFG = codec-cfg
PRG_MENCODER = mencoder
# these subdirectories required installation due binaries within them
ifeq ($(VIDIX),yes)
SUBDIRS += libdha vidix
DO_MAKE = @ for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done
endif

#prefix = /usr/local
BINDIR = ${prefix}/bin
# BINDIR = /usr/local/bin
MANDIR = ${prefix}/man

# a BSD compatible 'install' program
INSTALL = install

SRCS_COMMON = cyuv.c adpcm.c xacodec.c cpudetect.c mp_msg.c ac3-iec958.c dec_audio.c dec_video.c msvidc.c cinepak.c fli.c qtrle.c codec-cfg.c cfgparser.c my_profile.c RTjpegN.c minilzo.c nuppelvideo.c spudec.c playtree.c playtreeparser.c asxparser.c qtsmc.c ducktm1.c roqav.c
SRCS_MENCODER = mencoder.c $(SRCS_COMMON) libao2/afmt.c divx4_vbr.c libvo/aclib.c libvo/img_format.c libvo/osd.c
SRCS_MPLAYER = mplayer.c $(SRCS_COMMON) find_sub.c subreader.c lirc_mp.c mixer.c vobsub.c

OBJS_MENCODER = $(SRCS_MENCODER:.c=.o)
OBJS_MPLAYER = $(SRCS_MPLAYER:.c=.o)

ifeq ($(VO2),yes)
VO_LIBS = -Llibvo2 -lvo2
VO_INC = -Ilibvo2
else
VO_LIBS = -Llibvo -lvo
VO_INC = -Ilibvo
endif
V_LIBS = $(X_LIB) $(MP1E_LIB) $(GGI_LIB) $(MLIB_LIB) $(PNG_LIB) $(SDL_LIB) $(SVGA_LIB) $(AA_LIB) $(DIRECTFB_LIB)

AO_LIBS = -Llibao2 -lao2
A_LIBS = $(ALSA_LIB) $(NAS_LIB) $(MAD_LIB) $(VORBIS_LIB) $(SGIAUDIO_LIB)

CODEC_LIBS = -Lg72x -lg72x -Lmp3lib -lMP3 -Llibac3 -lac3 -Lliba52 -la52 -Lxa -lxa -Llibmpeg2 -lmpeg2 $(AV_LIB)
COMMON_LIBS = -Llinux -losdep -Lpostproc -lpostproc
ifeq ($(VIDIX),yes)
MISC_LIBS += -Llibdha -ldha -Lvidix -lvidix
endif
CFLAGS = $(OPTFLAGS) -Ilibmpdemux -Iloader $(VO_INC) $(EXTRA_INC) # -Wall

PARTS = g72x libmpdemux mp3lib libac3 liba52 libmp1e libmpeg2 libavcodec opendivx libao2 drivers drivers/syncfb linux postproc xa input
ifeq ($(VIDIX),yes)
PARTS += libdha vidix
endif
ifeq ($(VO2),yes)
PARTS += libvo2
else
PARTS += libvo
endif

ifeq ($(GUI),yes)
PARTS += Gui
endif

ifneq ($(W32_LIB),)
PARTS += loader loader/dshow
SRCS_MPLAYER += dll_init.c
SRCS_MENCODER += dll_init.c
# SRCS += dll_init.c
endif
LOADER_DEP = $(W32_DEP) $(DS_DEP)
LIB_LOADER = $(W32_LIB) $(DS_LIB)

ALL_PRG = $(PRG)
ifeq ($(MENCODER),yes)
ALL_PRG += $(PRG_MENCODER)
endif
ifeq ($(CSS_USE),yes)
ALL_PRG += $(PRG_FIBMAP)
endif

.SUFFIXES: .cc .c .o

# .PHONY: all clean

all:	$(ALL_PRG)

# $(PRG_AVIP)

.c.o:
	$(CC) -c $(CFLAGS) -o $@ $<

COMMON_DEPS = g72x/libg72x.a libmpdemux/libmpdemux.a libao2/libao2.a libac3/libac3.a liba52/liba52.a mp3lib/libMP3.a libmpeg2/libmpeg2.a linux/libosdep.a postproc/libpostproc.a opendivx/libdecore.a xa/libxa.a

ifeq ($(VIDIX),yes)
COMMON_DEPS += libdha/libdha.so vidix/libvidix.a
endif
ifeq ($(VO2),yes)
COMMON_DEPS += libvo2/libvo2.a
else
COMMON_DEPS += libvo/libvo.a
endif

loader/libloader.a:
	$(MAKE) -C loader

libmpdemux/libmpdemux.a:
	$(MAKE) -C libmpdemux

loader/DirectShow/libDS_Filter.a:
	$(MAKE) -C loader/DirectShow

loader/dshow/libDS_Filter.a:
	$(MAKE) -C loader/dshow

libmp1e/libmp1e.a:
	$(MAKE) -C libmp1e

libavcodec/libavcodec.a:
	$(MAKE) -C libavcodec

libmpeg2/libmpeg2.a:
	$(MAKE) -C libmpeg2

libvo/libvo.a:
	$(MAKE) -C libvo

libvo2/libvo2.a:
	$(MAKE) -C libvo2

libao2/libao2.a:
	$(MAKE) -C libao2

libac3/libac3.a:
	$(MAKE) -C libac3

liba52/liba52.a:
	$(MAKE) -C liba52

mp3lib/libMP3.a:
	$(MAKE) -C mp3lib

opendivx/libdecore.a:
	$(MAKE) -C opendivx

libdha/libdha.so:
	$(MAKE) -C libdha

vidix/libvidix.a:
	$(MAKE) -C vidix

# encore/libencore.a:
# 	$(MAKE) -C encore

Gui/libgui.a:
	$(MAKE) -C Gui

linux/libosdep.a:
	$(MAKE) -C linux

postproc/libpostproc.a:
	$(MAKE) -C postproc

xa/libxa.a:
	$(MAKE) -C xa

g72x/libg72x.a:
	$(MAKE) -C g72x

input/libinput.a:
	$(MAKE) -C input

MPLAYER_DEP = $(OBJS_MPLAYER) $(LOADER_DEP) $(MP1E_DEP) $(AV_DEP) $(COMMON_DEPS) input/libinput.a
MENCODER_DEP = $(OBJS_MENCODER) $(LOADER_DEP) $(MP1E_DEP) $(AV_DEP) $(COMMON_DEPS)

ifeq ($(GUI),yes)
MPLAYER_DEP += Gui/libgui.a
MENCODER_DEP += Gui/libgui.a
GUI_LIBS = -LGui -lgui
endif

VIDIX_LIBS =
ifeq ($(VIDIX),yes)
VIDIX_LIBS += -Lvidix -lvidix
endif

$(PRG):	$(MPLAYER_DEP)
	$(CC) $(CFLAGS) -o $(PRG) $(OBJS_MPLAYER) $(CODEC_LIBS) -Llibmpdemux -lmpdemux $(GUI_LIBS) $(VO_LIBS) $(AO_LIBS) $(LIB_LOADER) $(COMMON_LIBS) $(EXTRA_LIB) $(A_LIBS) $(V_LIBS) $(LIRC_LIB) $(CSS_LIB) $(ARCH_LIB) $(DECORE_LIB) $(TERMCAP_LIB) $(STATIC_LIB) $(GTK_LIBS) $(PNG_LIB) $(Z_LIB) $(STREAMING_LIB) $(VIDIX_LIBS) -Linput -linput -lm

$(PRG_FIBMAP): fibmap_mplayer.o
	$(CC) -o $(PRG_FIBMAP) fibmap_mplayer.o

ifeq ($(MENCODER),yes)
$(PRG_MENCODER): $(MENCODER_DEP)
	$(CC) $(CFLAGS) -o $(PRG_MENCODER) $(OBJS_MENCODER) $(CODEC_LIBS) -Llibmpdemux -lmpdemux $(LIB_LOADER) $(COMMON_LIBS) $(EXTRA_LIB) $(A_LIBS) $(CSS_LIB) $(GTK_LIBS) $(PNG_LIB) $(Z_LIB) $(ARCH_LIB) $(DECORE_LIB) $(ENCORE_LIB) $(TERMCAP_LIB) $(STREAMING_LIB) -lm
endif

# Every mplayer dependancy depends on version.h, to force building version.h
# first (in serial mode) before any other of the dependancies for a parallel make
# run.  This is necessary, because the make rule for version.h removes objects
# in a recursive "make distclean" and we must wait for this "make distclean" to
# finish before be can start builing new object files.
$(MPLAYER_DEP): version.h
$(MENCODER_DEP): version.h

$(PRG_CFG): version.h codec-cfg.c codec-cfg.h
	$(CC) $(CFLAGS) -g codec-cfg.c -o $(PRG_CFG) -DCODECS2HTML

install: $(ALL_PRG)
ifeq ($(VIDIX),yes)
	$(DO_MAKE)
endif
	if test ! -d $(BINDIR) ; then mkdir -p $(BINDIR) ; fi
	$(INSTALL) -m 755 -s $(PRG) $(BINDIR)/$(PRG)
ifeq ($(GUI),yes)
	-ln -sf $(BINDIR)/$(PRG) $(BINDIR)/gmplayer
endif
	if test ! -d $(MANDIR)/man1 ; then mkdir -p $(MANDIR)/man1; fi
	$(INSTALL) -c -m 644 DOCS/mplayer.1 $(MANDIR)/man1/mplayer.1
ifeq ($(MENCODER),yes)
	$(INSTALL) -m 755 -s $(PRG_MENCODER) $(BINDIR)/$(PRG_MENCODER)
	$(INSTALL) -c -m 644 DOCS/mencoder.1 $(MANDIR)/man1/mencoder.1
endif
	@if test ! -d $(DATADIR) ; then mkdir -p $(DATADIR) ; fi
	@if test ! -d $(DATADIR)/font ; then mkdir -p $(DATADIR)/font ; fi
	@if test ! -f $(DATADIR)/font/font.desc ; then \
	echo "*** Download font at http://www.mplayerhq.hu/homepage/dload.html" ; \
	echo "*** for OSD/Subtitles support and extract to $(DATADIR)/font/" ; \
	fi
ifeq ($(GUI),yes)
	@if test ! -d $(DATADIR)/Skin ; then mkdir -p $(DATADIR)/Skin ; fi
	@echo "*** Download skin(s) at http://www.mplayerhq.hu/homepage/dload.html"
	@echo "*** for GUI, and extract to $(DATADIR)/Skin/"
endif
	@if test ! -d $(CONFDIR) ; then mkdir -p $(CONFDIR) ; fi
	@if test -f $(CONFDIR)/codecs.conf.old ; then mv -f $(CONFDIR)/codecs.conf.old $(CONFDIR)/codecs.conf.older ; fi
	@if test -f $(CONFDIR)/codecs.conf ; then mv -f $(CONFDIR)/codecs.conf $(CONFDIR)/codecs.conf.old ; fi
	$(INSTALL) -c -m 644 etc/codecs.conf $(CONFDIR)/codecs.conf

ifeq ($(CSS_USE),yes)
	@echo "Following task requires root privs. If it fails don't panic"
	@echo "however it means you can't use fibmap_mplayer."
	@echo "Without this (or without running mplayer as root) you won't be"
	@echo "able to play encrypted DVDs."
	-$(INSTALL) -o 0 -g 0 -m 4755 -s $(PRG_FIBMAP) $(BINDIR)/$(PRG_FIBMAP)
endif

uninstall:
	-rm -f $(BINDIR)/$(PRG) $(BINDIR)/gmplayer $(MANDIR)/man1/mplayer.1
	-rm -f $(BINDIR)/$(PRG_FIBMAP)
	-rm -f  $(BINDIR)/$(PRG_MENCODER) $(MANDIR)/man1/mencoder.1
	@echo "Uninstall completed"

clean:
	-rm -f *.o *~ $(OBJS)

distclean:
	-rm -f *~ $(PRG) $(PRG_FIBMAP) $(PRG_HQ) $(PRG_AVIP) $(PRG_TV) $(OBJS) $(PRG_MENCODER)
	-rm -f *.o *.a .depend configure.log
	@for a in $(PARTS); do $(MAKE) -C $$a distclean; done

dep:	depend

depend:
	./version.sh `$(CC) --version`
	$(CC) -MM $(CFLAGS) mplayer.c mencoder.c $(SRCS_MPLAYER) $(SRCS_MENCODER) 1>.depend
	@for a in $(PARTS); do $(MAKE) -C $$a dep; done

# ./configure must be run if it changed in CVS
config.h: configure
	@echo "############################################################"
	@echo "####### Please run ./configure again - it's changed! #######"
	@echo "############################################################"
	@exit 1

# do not rebuild after cvs commits if .developer file is present!

# rebuild at every config.h/config.mak change:
version.h: config.h config.mak Makefile
	./version.sh `$(CC) --version`
ifeq ($(wildcard .developer),)
	$(MAKE) distclean
endif
	$(MAKE) depend

# rebuild at every CVS update:
ifeq ($(wildcard .developer),)
ifneq ($(wildcard CVS/Entries),)
version.h: CVS/Entries
endif
endif

#
# include dependency files if they exist
#
ifneq ($(wildcard .depend),)
include .depend
endif