view libmpcodecs/vqf.h @ 35334:3397976a029b

stream ftp: readline: Always initialize output parameter buf Only exception if passed parameter max is less than or equal to zero. That cannot happen with the current code. Additionally change readresp function to always copy the first response line if the parameter rsp is non-NULL. This fixes some error reporting that used uninitialized stack arrays.

/* (c)Copyright 1996-2000 NTT Cyber Space Laboratories */
/*                Released on 2000.05.22 by N. Iwakami */
/*                Modified on 2000.05.25 by N. Iwakami */
/*                Released on 2000.09.06 by N. Iwakami */

// Modified for MPlayer on 2004.12.29

#ifndef MPLAYER_VQF_H
#define MPLAYER_VQF_H

#include <stdio.h>

#ifdef _MSC_VER
#	ifdef DLL_MODULE
#		define DllPort    __declspec( dllexport )
#	else
#		define DllPort    __declspec( dllimport )
#	endif
#else
#	define DllPort
#endif

#ifdef __cplusplus
extern "C" {  // only need to import/export C interface if used by C++ source code
#endif

/************************/
/*** General settings ***/
/************************/
/* Initialization error code */
enum INIT_ERROR_CODE {
	TVQ_NO_ERROR = 0,     // no error
	TVQ_ERROR,            // general
	TVQ_ERROR_VERSION,    // wrong version
	TVQ_ERROR_CHANNEL,    // channel setting error
	TVQ_ERROR_MODE,       // wrong coding mode
	TVQ_ERROR_PARAM,      // inner parameter setting error
	TVQ_ERROR_N_CAN,      // wrong number of VQ pre-selection candidates, used only in encoder
};

/* version ID */
#define TVQ_UNKNOWN_VERSION  -1
#define V2                    0
#define V2PP                  1

#define N_VERSIONS            2

/* window types */
enum WINDOW_TYPE {
  ONLY_LONG_WINDOW = 0,
  LONG_SHORT_WINDOW,
  ONLY_SHORT_WINDOW,
  SHORT_LONG_WINDOW,
  SHORT_MEDIUM_WINDOW,
  MEDIUM_LONG_WINDOW,
  LONG_MEDIUM_WINDOW,
  MEDIUM_SHORT_WINDOW,
  ONLY_MEDIUM_WINDOW,
};

/* block types */
enum BLOCK_TYPE {
	BLK_SHORT = 0,
	BLK_MEDIUM,
	BLK_LONG,
	BLK_PPC,
};
#define N_BTYPE     3  // number of block types
#define N_INTR_TYPE 4  // number of interleave types, enum BLOCK_TYPE is commonly used for detecting interleave types.

/* maximum number of channels */
#define N_CH_MAX     2

/* type definition of code information interface */
typedef struct {
	/* block type */
    int  w_type;
    int  btype;

	/* FBC info */
    int  *segment_sw[ N_CH_MAX ];
    int  *band_sw[ N_CH_MAX ];
    int	 *fg_intensity[ N_CH_MAX ];

	/* VQ info */
    int  *wvq;

	/* BSE info */
    int  *fw;
    int  *fw_alf;

	/* gain info */
    int  *pow;

	/* LSP info */
    int  *lsp[ N_CH_MAX ];

	/* PPC info */
    int  pit[ N_CH_MAX ];
    int  *pls;
    int  pgain[ N_CH_MAX ];

	/* EBC info */
    int  *bc[ N_CH_MAX ];

    void *manager;
} INDEX;

/***********************************************/
/*** Definitions about program configuration ***/
/***********************************************/
/* type definition of tvqConfInfoSubBlock */
typedef struct {
	int sf_sz;         // subframe size
	int nsf;           // number of subframes
	int ndiv;          // number of division of weighted interleave vector quantization
	int ncrb;          // number of Bark-scale subbands
	int fw_ndiv;       // number of division of BSE VQ
	int fw_nbit;       // number of bits for BSE VQ
	int nsubg;         // number of sub-blocks for gain coding
	int ppc_enable;    // PPC switch
	int ebc_enable;    // EBC switch
	int ebc_crb_base;  // EBC base band
	int ebc_bits;      // EBC bits
	int fbc_enable;    // FBC switch
	int fbc_n_segment; // FBC number of segments
	int fbc_nband;     // FBC number of subbands
	int *fbc_crb_tbl;  // FBC subband table
} tvqConfInfoSubBlock;

/* type definition of tvqConfInfo */
typedef struct {
  /* frame configuration */
  int N_CH;
  /* window type coding */
  int BITS_WTYPE;
  /* LSP coding */
  int LSP_BIT0;
  int LSP_BIT1;
  int LSP_BIT2;
  int LSP_SPLIT;
  /* Bark-scale envelope coding */
  int FW_ARSW_BITS;
  /* gain coding */
  int GAIN_BITS;
  int SUB_GAIN_BITS;
  /* pitch excitation */
  int N_DIV_P;
  int BASF_BIT;
  int PGAIN_BIT;

  /* block type dependent parameters */
  tvqConfInfoSubBlock cfg[N_BTYPE];

} tvqConfInfo;


/*************************************************/
/*** Definitions about TwinVQ bitstream header ***/
/*************************************************/
//#include "declib_src/tvq_hdr.h"
//#ifndef	BUFSIZ
//#define	BUFSIZ		1024
//#endif

#define	KEYWORD_BYTES	4
#define	VERSION_BYTES	8
#define ELEM_BYTES      sizeof(unsigned long)


/*
 */
typedef struct {
	char		ID[KEYWORD_BYTES+VERSION_BYTES+1];
	int size;
	/* Common Chunk */
	int channelMode;   /* channel mode (mono:0/stereo:1) */
	int bitRate;       /* bit rate (kbit/s) */
	int samplingRate;  /* sampling rate (44.1 kHz -> 44) */
	int securityLevel; /* security level (always 0) */
	/* Text Chunk */
	char	Name[BUFSIZ];
	char	Comt[BUFSIZ];
	char	Auth[BUFSIZ];
	char	Cpyr[BUFSIZ];
	char	File[BUFSIZ];
	char	Extr[BUFSIZ];  // add by OKAMOTO 99.12.21
	/* Data size chunk*/
	int		Dsiz;
} headerInfo;

// TwinVQ decoder initialization/termination functions
//DllPort int  TvqInitialize( headerInfo *setupInfo, INDEX *index, int dispErrorMessageBox );
//DllPort void TvqTerminate( INDEX *index );
//DllPort void TvqGetVectorInfo(int *bits0[], int *bits1[]);
//DllPort void TvqResetFrameCounter(void);

// TwinVQ decoder function
//DllPort void TvqDecodeFrame(INDEX  *indexp, float out[]);
//DllPort int  TvqWtypeToBtype( int w_type, int *btype );
//DllPort void TvqUpdateVectorInfo(int varbits, int *ndiv, int bits0[], int bits1[]);
//DllPort void TvqSetFrameCounter( int position );

// TwinVQ query functions
//DllPort int   TvqCheckVersion(char *versionID);
//DllPort void  TvqGetSetupInfo(headerInfo *setupInfo); // setup information
//DllPort void  TvqGetConfInfo(tvqConfInfo *cf);  // configuration information
//DllPort int   TvqGetFrameSize(void);   // frame size
//DllPort int   TvqGetNumChannels(void); // number of channels
//DllPort int   TvqGetBitRate(void);                        // total bitrate
//DllPort float TvqGetSamplingRate(void);                   // sampling rate
//DllPort int   TvqGetNumFixedBitsPerFrame(void);           // number of fixed bits per frame
//DllPort int   TvqGetNumFrames(void);   // number of decoded frame
//DllPort int   TvqGetModuleVersion( char* versionString );

#ifdef V2PLUS_SUPPORT
// TwinVQ FB coding tool control
DllPort void  TvqFbCountUsedBits(int nbit);  // count number of used bits
DllPort float TvqGetFbCurrentBitrate(void);  // query average bitrate for the tool
DllPort int   TvqGetFbTotalBits(void);  // query total number of used bits
#endif

#ifdef __cplusplus
}
#endif


#endif /* MPLAYER_VQF_H */