Mercurial > mplayer.hg
view libvo/vo_svga.c @ 10206:35e306346e59
Using recv/send instead read/write for proper MinGW support (it's a 4.2BSD standard). Patch by FloDt <flodt8@yahoo.de>
author | alex |
---|---|
date | Thu, 29 May 2003 19:36:58 +0000 |
parents | 2390fddbe581 |
children | f531971e44cf |
line wrap: on
line source
/* Video driver for SVGAlib by Zoltan Mark Vician <se7en@sch.bme.hu> Code started: Mon Apr 1 23:25:47 2001 Some changes by Matan Ziv-Av <matan@svgalib.org> Compleat rewrite by Ivan Kalvachev 19 Mar 2003: Wrangings: - 1bpp doesn't work right for me with '-double' and svgalib 1.4.3, but works OK with svgalib 1.9.17 - The HW acceleration is not tested - svgalibs supports few chipsets, and i don't have any of them. If it works for you then let me know. I will remove this warning after confirm its status. - retrace sync works only in doublebuffer mode. - the retrace sync may slow down decoding a lot - mplayer is blocked while waiting for retrace - denoise3d fails to find common colorspace, use -vf denoise3d,scale TODO: - let choose_best_mode take aspect into account - set palette from mpi->palette or mpi->plane[1] - let OSD draw in black bars - need some OSD changes - Make nicer CONFIG parsing - change video mode logical width to match img->stride[0] - for HW only */ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <vga.h> #include <limits.h> #include "config.h" #include "video_out.h" #include "video_out_internal.h" #include "fastmemcpy.h" #include "osdep/getch2.h" #ifdef CONFIG_VIDIX #include "vosub_vidix.h" #endif #include "sub.h" #include "../mp_msg.h" //#include "../mp_image.h" #include <assert.h> //silence warnings, probably it have to go in some global header #define UNUSED(x) ((void)(x)) extern int vo_doublebuffering; extern int vo_directrendering; extern int vo_dbpp; extern int verbose; static uint32_t query_format(uint32_t format); static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src, unsigned char *srca, int stride); static uint32_t get_image(mp_image_t *mpi); #define MAXPAGES 16 #define CAP_ACCEL_CLEAR 8 #define CAP_ACCEL_PUTIMAGE 4 #define CAP_ACCEL_BACKGR 2 #define CAP_LINEAR 1 static uint8_t zerobuf[8192];//used when clear screen with vga_draw static int squarepix; static int force_vm=0; static int force_native=0; static int sync_flip=0; static int cpage=0, max_pages; static vga_modeinfo * modeinfo; static int mode_stride; //keep it in case of vga_setlogicalwidth static int stride_granularity; //not yet used static int mode_bpp; static int mode_capabilities; static int image_width,image_height; // used by OSD static uint32_t x_pos, y_pos; static struct { int yoffset;//y position of the page int doffset;//display start of the page void * vbase;//memory start address of the page }PageStore[MAXPAGES]; static vo_info_t info = { "SVGAlib", "svga", "Ivan Kalvachev <iive@sf.net>", "" }; #ifdef CONFIG_VIDIX static char vidix_name[32] = ""; #endif LIBVO_EXTERN(svga) /* probably this should be in separate pages.c file so all vo_drivers can use it, do it if you like it. TODO direct render with IP buffering support - for vo_tdfx_vid */ #define PAGES_MAX MAXPAGES #define Page_Empty 0 #define Page_Durty 1 static int page_locks[PAGES_MAX]; static int pagecurrent; static int pagetoshow; static int pagesmax; static void page_init(int max){ int i; for(i=0;i<max;i++){ page_locks[i]=0; } pagetoshow=pagecurrent=0; pagesmax=max; } //internal use function //return number of 1'st free page or -1 if no free one static int page_find_free(){ int i; for(i=0;i<pagesmax;i++) if(page_locks[i]==Page_Empty) return i; return -1; } //return the number of page we may draw directly of -1 if no such static int page_get_image(){ int pg; pg=page_find_free(); if(pg>=0) page_locks[pg]=Page_Durty; return pg; } //return the number of page we should draw into. static int page_draw_image(){ int pg; pg=page_find_free(); if(pg<0) pg=pagecurrent; page_locks[pg]=Page_Durty; pagetoshow=pg; return pg; } static void page_draw_gotten_image(int pg){ assert((pg>=0)&&(pg<PAGES_MAX)); pagetoshow=pg; } //return the number of the page to show static int page_flip_page(){ page_locks[pagecurrent]=Page_Empty; pagecurrent=pagetoshow; assert(pagecurrent>=0); //movequeue; page_locks[pagecurrent]=Page_Durty; return pagecurrent; } //------------ END OF PAGE CODE ------------- static uint32_t preinit(const char *arg) { int i; char s[64]; getch2_disable(); memset(zerobuf,0,sizeof(zerobuf)); force_vm=force_native=squarepix=0; if(arg)while(*arg) { #ifdef CONFIG_VIDIX if(memcmp(arg,"vidix",5)==0) { i=6; while(arg[i] && arg[i]!=':') i++; strncpy(vidix_name, arg+6, i-6); vidix_name[i-5]=0; if(arg[i]==':')i++; arg+=i; vidix_preinit(vidix_name, &video_out_svga); } #endif if(!strncmp(arg,"sq",2)) { squarepix=1; arg+=2; if( *arg == ':' ) arg++; } if(!strncmp(arg,"native",6)) { force_native=1; arg+=6; if( *arg == ':' ) arg++; } if(!strncmp(arg,"retrace",7)) { sync_flip=1; arg+=7; if( *arg == ':' ) arg++; } if(*arg) { i=0; while(arg[i] && arg[i]!=':')i++; strncpy(s, arg, i); s[i]=0; arg+=i; if(*arg==':')arg++; i=vga_getmodenumber(s); if(i>0) { force_vm = i; if(verbose) printf("vo_svga: Forcing mode %i\n",force_vm); } } } vga_init(); return 0; } static void svga_clear_box(int x,int y,int w,int h){ uint8_t * rgbplane; int i; if (mode_capabilities&CAP_ACCEL_CLEAR){ if(verbose > 2) printf("vo_svga: clearing box %d,%d - %d,%d with HW acceleration\n", x,y,w,h); if(mode_capabilities&CAP_ACCEL_BACKGR) vga_accel(ACCEL_SYNC); vga_accel(ACCEL_SETFGCOLOR,0);//black vga_accel(ACCEL_FILLBOX,x,y,w,h); return; } if (mode_capabilities & CAP_LINEAR){ if(verbose > 2) printf("vo_svga: clearing box %d,%d - %d,%d with memset\n",x,y,w,h); rgbplane=PageStore[0].vbase + (y*mode_stride) + (x*modeinfo->bytesperpixel); for(i=0;i<h;i++){ //i'm afraid that memcpy is better optimized than memset;) memcpy(rgbplane,zerobuf,w*modeinfo->bytesperpixel); // memset(rgbplane,0,w*modeinfo->bytesperpixel); rgbplane+=mode_stride; } return; } //native if(verbose > 2) printf("vo_svga: clearing box %d,%d - %d,%d with native draw \n",x,y,w,h); if(modeinfo->bytesperpixel!=0) w*=modeinfo->bytesperpixel; for(i=0;i<h;i++){ vga_drawscansegment(zerobuf,x,y+i,w); } }; static uint32_t svga_draw_image(mp_image_t *mpi){ int i,x,y,w,h; int stride; uint8_t *rgbplane, *base; int bytesperline; if(mpi->flags & MP_IMGFLAG_DIRECT){ if(verbose > 2) printf("vo_svga: drawing direct rendered surface\n"); cpage=(uint32_t)mpi->priv; page_draw_gotten_image(cpage); return VO_TRUE; //it's already done } // if (mpi->flags&MP_IMGFLAGS_DRAWBACK) // return VO_TRUE;//direct render method 2 cpage=page_draw_image(); // these variables are used in loops x = mpi->x; y = mpi->y; w = mpi->w; h = mpi->h; stride = mpi->stride[0]; rgbplane = mpi->planes[0] + y*stride + (x*mpi->bpp)/8; x+=x_pos;//center y+=y_pos; if(mpi->bpp >= 8){//for modes<8 use only native if( (mode_capabilities&CAP_ACCEL_PUTIMAGE) && (x==0) && (w==mpi->width) && (stride == mode_stride) ){ //only monolite image can be accelerated w=(stride*8)/mpi->bpp;//we transfer pixels in the stride so the source //ACCELERATE if(verbose>2) printf("vo_svga: using HW PutImage (x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); if(mode_capabilities & CAP_ACCEL_BACKGR) vga_accel(ACCEL_SYNC); vga_accel(ACCEL_PUTIMAGE,x,y+PageStore[cpage].yoffset,w,h,rgbplane); return VO_TRUE; } if( mode_capabilities&CAP_LINEAR){ //DIRECT if(verbose>2) printf("vo_svga: using Direct memcpy (x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); bytesperline=(w*mpi->bpp)/8; base=PageStore[cpage].vbase + (y*mode_stride) + (x*mpi->bpp)/8; for(i=0;i<h;i++){ mem2agpcpy(base,rgbplane,bytesperline); base+=mode_stride; rgbplane+=stride; } return VO_TRUE; } }//(modebpp>=8 //NATIVE { int length; length=(w*mpi->bpp)/8; //one byte per pixel! svgalib innovation if(mpi->imgfmt==IMGFMT_RG4B || mpi->imgfmt==IMGFMT_BG4B) length=w; if(verbose>2) printf("vo_svga: using Native vga_draw(x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); y+=PageStore[cpage].yoffset;//y position of the page beggining for(i=0;i<h;i++){ vga_drawscansegment(rgbplane,x,y+i,length); rgbplane+=stride; } } return VO_TRUE; } int bpp_from_vminfo(vga_modeinfo *vminfo){ switch(vminfo->colors){ case 2: return 1; case 16: return 4; case 256: return 8; case 32768: return 15; case 65536: return 16; case 1<<24: return 8*vminfo->bytesperpixel; } return 0; } int find_best_svga_mode(int req_w,int req_h, int req_bpp){ int badness,prev_badness; int bestmode,lastmode; int i; vga_modeinfo *vminfo; //int best aspect mode // best linear mode // best normal mode (no modeX) prev_badness = 0;//take care of special case below bestmode = 0; //0 is the TEXT mode lastmode = vga_lastmodenumber(); for(i=1;i<=lastmode;i++){ vminfo = vga_getmodeinfo(i); if( vminfo == NULL ) continue; if(verbose>3) printf("vo_svga: testing mode %d (%s)\n",i,vga_getmodename(i)); if( vga_hasmode(i) == 0 ) continue; if( req_bpp != bpp_from_vminfo(vminfo) )continue; if( (vminfo->width < req_w) || (vminfo->height < req_h) ) continue; badness=(vminfo->width * vminfo->height) - (req_h * req_w); //put here aspect calculations if(squarepix) if( vminfo->width*3 != vminfo->height*4 ) continue; if( bestmode==0 || prev_badness >= badness ){//modeX etc... prev_badness=badness; bestmode=i; if(verbose>3) printf("vo_svga: found good mode %d with badness %d\n",i,badness); } } return bestmode; } static uint32_t control(uint32_t request, void *data, ...) { switch (request) { case VOCTRL_QUERY_FORMAT: return query_format(*((uint32_t*)data)); case VOCTRL_DRAW_IMAGE: return svga_draw_image( (mp_image_t *)data); case VOCTRL_GET_IMAGE: return get_image(data); } return VO_NOTIMPL; } // // This function is called to init the video driver for specific mode // static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, uint32_t d_height, uint32_t flags, char *title, uint32_t format) { int32_t req_w = width;// (d_width > 0 ? d_width : width); int32_t req_h = height;// (d_height > 0 ? d_height : height); uint16_t vid_mode = 0; int32_t req_bpp; uint32_t accflags; if(verbose) printf("vo_svga: config(%i, %i, %i, %i, %08x, %s, %08x)\n", width, height, d_width, d_height, flags, title, format); //Only RGB modes supported if (!IMGFMT_IS_RGB(format) && !IMGFMT_IS_BGR(format)) {assert(0);return -1;} req_bpp = IMGFMT_BGR_DEPTH(format); if( vo_dbpp!=0 && vo_dbpp!=req_bpp) {assert(0);return-1;} if(!force_vm) { if (verbose) { printf("vo_svga: Looking for the best resolution...\n"); printf("vo_svga: req_w: %d, req_h: %d, bpp: %d\n",req_w,req_h,req_bpp); } vid_mode=find_best_svga_mode(req_w,req_h,req_bpp); if(vid_mode==0) return 1; modeinfo=vga_getmodeinfo(vid_mode); }else{//force_vm vid_mode=force_vm; if(vga_hasmode(vid_mode) == 0){ printf("vo_svga: forced vid_mode %d (%s) not available\n", vid_mode,vga_getmodename(vid_mode)); return 1; //error; } modeinfo=vga_getmodeinfo(vid_mode); if( (modeinfo->width < req_w) || (modeinfo->height < req_h) ){ printf("vo_svga: forced vid_mode %d (%s) too small\n", vid_mode,vga_getmodename(vid_mode)); return 1; } } mode_bpp=bpp_from_vminfo(modeinfo); printf("vo_svga: vid_mode: %d, %dx%d %dbpp\n", vid_mode,modeinfo->width,modeinfo->height,mode_bpp); if (vga_setmode(vid_mode) == -1) { printf("vo_svga: vga_setmode(%d) failed.\n",vid_mode); uninit(); return 1; // error } /* set 332 palette for 8 bpp */ if(mode_bpp==8){ int i; for(i=0; i<256; i++) vga_setpalette(i, ((i>>5)&7)*9, ((i>>2)&7)*9, (i&3)*21); } /* set 121 palette for 4 bpp */ else if(mode_bpp==4){ int i; for(i=0; i<16; i++) vga_setpalette(i, ((i>>3)&1)*63, ((i>>1)&3)*21, (i&1)*63); } //if we change the logical width, we should know the granularity stride_granularity=8;//according to man vga_logicalwidth if(modeinfo->flags & EXT_INFO_AVAILABLE){ stride_granularity=modeinfo->linewidth_unit; } //look for hardware acceleration mode_capabilities=0;//NATIVE; if(!force_native){//if we want to use only native drawers if(modeinfo->flags & HAVE_EXT_SET){//support for hwaccel interface accflags=vga_ext_set(VGA_EXT_AVAILABLE,VGA_AVAIL_ACCEL); if(accflags & ACCELFLAG_FILLBOX) // clear screen mode_capabilities|=CAP_ACCEL_CLEAR; if(accflags & ACCELFLAG_PUTIMAGE)//support for mem->vid transfer mode_capabilities|=CAP_ACCEL_PUTIMAGE; if((accflags & ACCELFLAG_SETMODE) && (accflags & ACCELFLAG_SYNC)){ vga_accel(ACCEL_SETMODE,BLITS_IN_BACKGROUND); mode_capabilities|=CAP_ACCEL_BACKGR;//can draw in backgraund } } if(modeinfo->flags & IS_LINEAR){ mode_capabilities|=CAP_LINEAR; //don't use bank & vga_draw } else{ if(modeinfo->flags & CAPABLE_LINEAR){ int vid_mem_size; vid_mem_size = vga_setlinearaddressing(); if(vid_mem_size != -1){ modeinfo=vga_getmodeinfo(vid_mode);//sometimes they change parameters mode_capabilities|=CAP_LINEAR; } } } }//fi force native if(mode_capabilities&CAP_LINEAR){ printf("vo_svga: video mode is linear and memcpy could be used for image transfer\n"); } if(mode_capabilities&CAP_ACCEL_PUTIMAGE){ printf("vo_svga: video mode have hardware acceleration and put_image could be used\n"); printf("vo_svga: If it works for you i would like to know \nvo_svga: (send log with `mplayer test.avi -v -v -v -v &> svga.log`). Thx\n"); } //here is the place to handle strides for accel_ modes; mode_stride=modeinfo->linewidth; //we may try to set a bigger stride for video mode that will match the mpi->stride, //this way we will transfer more data, but HW put_image can do it in backgraund! //now lets see how many pages we can use max_pages = modeinfo->maxpixels/(modeinfo->height * modeinfo->width); if(max_pages > MAXPAGES) max_pages = MAXPAGES; if(!vo_doublebuffering) max_pages=1; //fill PageStore structs { int i; uint8_t * GRAPH_MEM; int dof; GRAPH_MEM=vga_getgraphmem(); for(i=0;i<max_pages;i++){ //calculate display offset dof = i * modeinfo->height * modeinfo->width; if(modeinfo->bytesperpixel != 0) dof*=modeinfo->bytesperpixel; //check video chip limitations if( dof != (dof & modeinfo->startaddressrange) ){ max_pages=i;//page 0 will never come here break; } PageStore[i].yoffset = i * modeinfo->height;//starting y offset PageStore[i].vbase = GRAPH_MEM + i*modeinfo->height*mode_stride; //memory base address PageStore[i].doffset = dof; //display offset } } assert(max_pages>0); printf("vo_svga: video mode have %d page(s)\n",max_pages); page_init(max_pages); //15bpp if(modeinfo->bytesperpixel!=0) vga_claimvideomemory(max_pages * modeinfo->height * modeinfo->width * modeinfo->bytesperpixel); else vga_claimvideomemory(max_pages * modeinfo->height * modeinfo->width * mode_bpp / 8); svga_clear_box(0,0,modeinfo->width,modeinfo->height * max_pages); image_height=req_h; image_width=req_w; x_pos = (modeinfo->width - req_w) / 2; y_pos = (modeinfo->height - req_h) / 2; x_pos &= ~(15); //align x offset position to 16 pixels printf("vo_svga: centering image. start at (%d,%d)\n",x_pos,y_pos); #ifdef CONFIG_VIDIX if(vidix_name[0]){ vidix_init(width, height, x_pos, y_pos, modeinfo->width, modeinfo->height, format, mode_bpp, modeinfo->width,modeinfo->height); printf("vo_svga: Using VIDIX. w=%i h=%i mw=%i mh=%i\n",width,height, modeinfo->width,modeinfo->height); vidix_start(); } #endif vga_setdisplaystart(0); return (0); } static uint32_t draw_slice(uint8_t *image[],int stride[], int w, int h, int x, int y) { assert(0); UNUSED(image);UNUSED(stride); UNUSED(w);UNUSED(h); UNUSED(x);UNUSED(y); return VO_ERROR;//this is yv12 only -> vf_scale should do all transforms } static uint32_t draw_frame(uint8_t *src[]) { assert(0); UNUSED(src); return VO_ERROR;//this one should not be called } static void draw_osd(void) { // for now draw only over the image // vo_draw_text(modeinfo->width, modeinfo->height, draw_alpha);//black bar OSD vo_draw_text(image_width, image_height, draw_alpha); } static void flip_page(void) { static int oldpage=-1; int page; page = page_flip_page(); if(verbose > 2) printf("vo_svga: viewing page %d\n",page); if(sync_flip && oldpage!=page){ if(verbose > 2) printf("vo_svga:vga_waitretrace\n"); vga_waitretrace(); } vga_setdisplaystart(PageStore[cpage].doffset); oldpage=page; } static void check_events(void) { } static void uninit(void) { #ifdef CONFIG_VIDIX if(vidix_name[0])vidix_term(); #endif vga_setmode(TEXT); } /* --------------------------------------------------------------------- */ static uint32_t query_format(uint32_t format) { int32_t req_bpp,flags; int i,lastmode; vga_modeinfo * vminfo; if (verbose >3) printf("vo_svga: query_format=%X \n",format); //only RGB modes supported if( (!IMGFMT_IS_RGB(format)) && (!IMGFMT_IS_BGR(format)) ) return 0; // Reject different endian #ifdef WORDS_BIGENDIAN if (IMGFMT_IS_BGR(format)) return 0; #else if (IMGFMT_IS_RGB(format)) return 0; #endif //svgalib supports only BG4B! if we want BGR4 we have to emulate it (sw) if( format==IMGFMT_BGR4 || format==IMGFMT_RGB4) return 0; req_bpp = IMGFMT_RGB_DEPTH(format); if( vo_dbpp>0 && vo_dbpp!=req_bpp ) return 0; //support -bpp options //scan all modes lastmode = vga_lastmodenumber(); for(i=1;i<=lastmode;i++){ vminfo = vga_getmodeinfo(i); if( vminfo == NULL ) continue; if( vga_hasmode(i) == 0 ) continue; if( req_bpp != bpp_from_vminfo(vminfo) ) continue; if( (force_vm > 0) && (force_vm != i) ) continue;//quick hack flags = VFCAP_CSP_SUPPORTED| VFCAP_CSP_SUPPORTED_BY_HW| VFCAP_ACCEPT_STRIDE| 0; if(req_bpp>8) flags|=VFCAP_OSD; return flags; } return 0; } static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src, unsigned char *srca, int stride) { char* base; int bytelen; if(verbose>2) printf("vo_svga: draw_alpha(x0=%d,y0=%d,w=%d,h=%d,src=%p,srca=%p,stride=%d\n", x0,y0,w,h,src,srca,stride); x0+=x_pos;// in case of drawing over image y0+=y_pos; //only modes with bytesperpixel>0 can draw OSD if(modeinfo->bytesperpixel==0) return; if(!(mode_capabilities&CAP_LINEAR)) return;//force_native will remove OSD if(verbose>3) printf("vo_svga: OSD draw in page %d",cpage); base=PageStore[cpage].vbase + y0*mode_stride + x0*modeinfo->bytesperpixel; bytelen = modeinfo->width * modeinfo->bytesperpixel; switch (mode_bpp) { case 32: vo_draw_alpha_rgb32(w, h, src, srca, stride, base, bytelen); break; case 24: vo_draw_alpha_rgb24(w, h, src, srca, stride, base, bytelen); break; case 16: vo_draw_alpha_rgb16(w, h, src, srca, stride, base, bytelen); break; case 15: vo_draw_alpha_rgb15(w, h, src, srca, stride, base, bytelen); break; } } static uint32_t get_image(mp_image_t *mpi){ int page; if(!IMGFMT_IS_BGR(mpi->imgfmt) && !IMGFMT_IS_RGB(mpi->imgfmt) ){ assert(0);//should never happen return(VO_FALSE); } if ( ( (mpi->type != MP_IMGTYPE_STATIC) && (mpi->type != MP_IMGTYPE_TEMP)) || (mpi->flags & MP_IMGFLAG_PLANAR) || (mpi->flags & MP_IMGFLAG_YUV) ) return(VO_FALSE); //reading from video memory is horribly slow if( !(mpi->flags & MP_IMGFLAG_READABLE) && vo_directrendering && (mode_capabilities & CAP_LINEAR) ){ page=page_get_image(); if(page >= 0){ mpi->flags |= MP_IMGFLAG_DIRECT; mpi->stride[0] = mode_stride; mpi->planes[0] = PageStore[page].vbase + y_pos*mode_stride + (x_pos*mpi->bpp)/8; (int)mpi->priv=page; if(verbose>2) printf("vo_svga: direct render allocated! page=%d\n",page); return(VO_TRUE); } } return(VO_FALSE); }