Mercurial > mplayer.hg
view configure @ 1:3b5f5d1c5041
Initial revision
author | arpi_esp |
---|---|
date | Sat, 24 Feb 2001 20:28:24 +0000 |
parents | |
children | ad89e009076b |
line wrap: on
line source
#!/bin/sh # # MPlayer configurator. (C) 2000 Pontscho/fresh!mindworkz # pontscho@makacs.poliod.hu # # some changes by A'rpi/ESP-team: # - some english bugfix :) # - removed _??exists flags, _?? is enough... # - creating only config.mak files instead of whole Makefiles # # some changes by LGB (Gábor Lénárt): # - SOME gcc may support 'k7', so I added tests for ALL CPU type optimization # switches with the ability to find out the best optimization for your CPU. # - Help moved to the begining to avoid tests if user only wants help. # - A one lined help to indicate detailed help for users # - Fixed /tmp race (PIDs can be predicted, I added random numbers as well) # # some changes by A'rpi/ESP-team: # - the --win32libdir patch by Aaron Hope applied # - some english bugfix again :) # - cpu type selection changed: # ( k7->k6->k5-> ) || (i686->pentiumpro-> ) pentium-> i486 -> i386 -> error! # - cpu type for AMD/family=5 changed k6->k5 # # some changes by LGB: # - Ehhh, AMD K6-2 returns with cpuid 5 ;-) Changing back Arpi's last change :) # More info: AMD K6-2 reports with family 5, duron with 6, so I attached # much finer CPU type detection based on Linux kernel's one :) # (k5: 5, model<6, k6: 5, model>=6, k7: 6, model=any) # - On some exit point (error) temporary files were not deleted. Fixed. # - $TMP and $TMP2 are renamed to $TMPC and $TMPO ;-) # - Some useless { ... } are removed # # some changes by A'rpi/ESP-team: # - added 'athlon' target for the new athlongcc [Ian Kumlien] # - applied _win32libdir=-L patch by Magnus Pfeffer # # -- # LGB: Help moved here. if [ "$1" = "--help" -o "$1" = "-help" -o "$1" = "-h" ]; then cat << EOF usage: $0 [options] params: --enable-mmx build with mmx support [autodetect] --enable-3dnow build with 3dnow! support [autodetect] --enable-sse build with sse support [autodetect] --enable-gl build with OpenGL render support [autodetect] --enable-sdl build with SDL render support [def.: disabled!] --enable-mga build with mga_vid support [autodetect, if /dev/mga_vid is available] --enable-xmga build with mga_vid X Window support [autodetect, if both /dev/mga_vid and x11 are available] --enable-xv build with Xv render support for X 4.x [autodetect] --enable-x11 build with X11 render support [autodetect] --enable-mlib build with MLIB support ( only Solaris ) --enable-termcap use termcap database for key codes --enable-xmmp use XMMP audio drivers --enable-lirc enable LIRC (remote control) support --with-x11libdir=DIR X library files are in DIR --with-win32libdir=DIR windows codec files --size-x=SIZE default screen width --size-y=SIZE default screen height EOF exit 0 fi # LGB: Some inital help echo "You can get detailed help on configure with: $0 --help" echo "Please wait while ./configure discovers your software and hardware environment!" # LGB: temporary files TMPC="/tmp/mplayer-conf-${RANDOM}-$$-${RANDOM}.c" TMPO="/tmp/mplayer-conf-${RANDOM}-$$-${RANDOM}.o" # --- # config files CCONF='config.h' MCONF='config.mak' # --- TAB=`echo -n -e "\t"` pname=`cat /proc/cpuinfo | grep 'model name' | cut -d ':' -f 2` pparam=`cat /proc/cpuinfo | grep 'features' | cut -d ':' -f 2` if [ -z "$pparam" ]; then pparam=`cat /proc/cpuinfo | grep 'flags' | cut -d ':' -f 2` fi pvendor=`cat /proc/cpuinfo | grep 'vendor_id' | cut -d ':' -f 2 | cut -d ' ' -f 2` pfamily=`cat /proc/cpuinfo | grep 'cpu family' | cut -d ':' -f 2 | cut -d ' ' -f 2` pmodel=`cat /proc/cpuinfo | grep "model$TAB" | cut -d ':' -f 2 | cut -d ' ' -f 2` pstepping=`cat /proc/cpuinfo | grep 'stepping' | cut -d ':' -f 2 | cut -d ' ' -f 2` _mmx=no _3dnow=no _mtrr=no _sse=no _mga=no _gl=no _sdl=no _xv=no _x11=no _3dfx=no _syncfb=no _mlib=no _mpg123=no _xmga=no _lirc=no _x=1 _y=1 _gllib= _sdllib= _x11lib= _xvlib= _xlibdir= for i in `echo $pparam`; do case "$i" in 3dnow) _3dnow=yes _mpg123=yes ;; mmx) _mmx=yes ;; mtrr) _mtrr=yes ;; k6_mtrr) _mtrr=yes ;; xmm) _sse=yes ;; sse) _sse=yes ;; kni) _sse=yes ;; esac done if [ -e /usr/X11R6 ]; then _x11libdir=-L/usr/X11R6/lib else if [ -e /usr/X11 ]; then _x11libdir=-L/usr/X11/lib fi fi _win32libdirnotify=no if [ -e /usr/lib/win32 ]; then _win32libdir=/usr/lib/win32 else if [ -e /usr/local/lib/win32 ]; then _win32libdir=/usr/local/lib/win32 else # This is our default: _win32libdir=/usr/lib/win32 _win32libdirnotify=yes fi fi if [ -e /dev/mga_vid ]; then _mga=yes _syncfb=yes fi proc=pentium case "$pvendor" in AuthenticAMD) case "$pfamily" in 3) proc=i386 ;; 4) proc=i486 ;; 5) if [ $pmodel -ge 6 ]; then # LGB: models are: K5/SSA5 K5 K5 K5 ? ? K6 K6 K6-2 K6-3 proc=k6 else proc=k5 fi ;; 6|7) # LGB: Though it seems Athlon CPUs returns with "6" proc=k7 ;; *) proc=pentium ;; esac ;; GenuineIntel) case "$pfamily" in 3) proc=i386 ;; 4) proc=i486 ;; 5) proc=pentium ;; 6) proc=i686 ;; *) proc=pentium ;; esac ;; unknown) # added by Gabucino - upon Tibcu's request case "$pfamily" in 3) proc=i386 ;; 4) proc=i486 ;; *) proc=pentium ;; esac ;; *) proc=pentium ;; esac # --- cat > $TMPC << EOF int main( void ) { return 0; } EOF # check that gcc supports our cpu, if not, fallback to pentium # LGB: check -mcpu and -march swithing step by step with enabling # to fall back till 386. #echo -n "Checking your GCC CPU optimalization abilities: " if [ "$proc" = "k7" ]; then # echo -n "trying k7 " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=athlon fi if [ "$proc" = "athlon" ]; then # echo -n "trying athlon " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=k6 fi if [ "$proc" = "k6" ]; then # echo -n "trying k6 " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=k5 fi if [ "$proc" = "k5" ]; then # echo -n "trying k5 " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentium fi if [ "$proc" = "i686" ]; then # echo -n "trying i686 " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentiumpro fi if [ "$proc" = "pentiumpro" ]; then # echo -n "trying pentiumpro " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentium fi if [ "$proc" = "pentium" ]; then # echo -n "trying pentium " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=i486 fi if [ "$proc" = "i486" ]; then # echo -n "trying i486 " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=i386 fi if [ "$proc" = "i386" ]; then # echo -n "trying i386 " gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=error fi if [ "$proc" = "error" ]; then echo echo "Your gcc does not support even \"i386\" for '-march' and '-mcpu'." >&2 rm -f $TMPC $TMPO exit fi #echo "DONE (${proc})." # check GL & X11 & Xext & Xv & SDL & termcap libs gcc $TMPC -o $TMPO $_x11libdir/ -lGL &> /dev/null && _gl=yes gcc $TMPC -o $TMPO $_x11libdir -lX11 -lXext &> /dev/null && _x11=yes gcc $TMPC -o $TMPO $_x11libdir -lXv &> /dev/null && _xv=yes gcc $TMPC -o $TMPO $_x11libdir -L/usr/local/lib/ -lpthread &> /dev/null || \ { echo "Lib pthread not found."; rm -f $TMPC $TMPO ; exit 1; } # SDL disabled by default (0.11pre22-) because of the compilation problems # this is very buggy & experimental code, use it only if you really need it!! _have_sdl=no gcc $TMPC -o $TMPO $_x11libdir -L/usr/local/lib/ -lSDL -lpthread &> /dev/null && _have_sdl=yes _termcap=no gcc $TMPC -o $TMPO -ltermcap &> /dev/null && _termcap=yes _binutils=no as libac3/downmix/downmix_i386.S -o $TMPO &> /dev/null && _binutils=yes cat > $TMPC << EOF #include <GL/gl.h> int main( void ) { return 0; } EOF gcc $TMPC -o $TMPO $_x11libdir/ -lGL &> /dev/null || \ { _gl=no; echo "GL includes not found!";} rm -f $TMPC $TMPO if [ $_x11 = 'yes' ]; then if [ $_mga = 'yes' ]; then _xmga=yes fi fi # --- # check for the parameters. for ac_option do case "$ac_option" in --enable-sse) _sse=yes ;; --enable-3dnow) _3dnow=yes ;; --enable-mmx) _mmx=yes ;; --enable-gl) _gl=yes ;; --enable-sdl) _sdl=yes ;; --enable-mga) _mga=yes ;; --enable-xmga) _xmga=yes ;; --enable-xv) _xv=yes ;; --enable-x11) _x11=yes ;; --enable-3dfx) _3dfx=yes ;; --enable-syncfb) _syncfb=yes ;; --enable-mlib) _mlib=yes ;; --enable-termcap) _termcap=yes ;; --enable-xmmp) _xmmp=yes ;; --enable-lirc) _lirc=yes ;; --disable-sse) _sse=no ;; --disable-3dnow) _3dnow=no ;; --disable-mmx) _mmx=no ;; --disable-gl) _gl=no ;; --disable-sdl) _sdl=no ;; --disable-mga) _mga=no ;; --disable-xmga) _xmga=no ;; --disable-xv) _xv=no ;; --disable-x11) _x11=no ;; --disable-mlib) _mlib=no ;; --disable-termcap) _termcap=no ;; --with-x11libdir=*) _x11libdir=-L`echo $ac_option | cut -d '=' -f 2` ;; --with-win32libdir=*) _win32libdir=`echo $ac_option | cut -d '=' -f 2` ;; --size-x=*) _x=`echo $ac_option | cut -d '=' -f 2` ;; --size-y=*) _y=`echo $ac_option | cut -d '=' -f 2` ;; esac done # to screen. echo "Checking for cpu vendor ... $pvendor ( $pfamily:$pmodel:$pstepping )" echo "Checking for cpu type ... $pname" echo "Optimizing to ... $proc" echo "Checking for mmx support ... $_mmx" echo "Checking for 3dnow support ... $_3dnow" echo "Checking for sse support ... $_sse" echo "Checking for mtrr support ... $_mtrr" echo "Screen size ... ${_x}x${_y}" echo "Checking for X11 libs ... $_x11libdir" echo "Checking mga_vid device ... $_mga" echo "Checking for xmga ... $_xmga" echo "Checking for SDL ... $_sdl" echo "Checking for OpenGL ... $_gl" echo "Checking for Xv ... $_xv" echo "Checking for X11 ... $_x11" # write conf files. if [ $_gl = yes ]; then _gllib='-lGL' fi if [ $_x11 = yes ]; then _x11lib='-lX11 -lXext' fi if [ $_xv = yes ]; then _xvlib='-lXv' fi if [ $_sdl = yes ]; then _sdllib='-lSDL -lpthread' fi if [ "$_termcap" = "yes" ]; then _termcap='#define USE_TERMCAP' _libtermcap='-ltermcap' else _termcap='#undef USE_TERMCAP' _libtermcap='' fi if [ "$_xmmp" = "yes" ]; then _xmmpaudio='#define USE_XMMP_AUDIO' _xmmplibs='-Llibxmm -lxmm' else _xmmpaudio='#undef USE_XMMP_AUDIO' fi if [ "$_lirc" = "yes" ]; then _lircdefs='#define HAVE_LIRC' _lirclibs='-llirc_client' else _lircdefs='#undef HAVE_LIRC' _lirclibs='' fi echo echo "Creating $MCONF" cat > $MCONF << EOF # -------- Generated by ./configure ----------- AR=ar CC=gcc # OPTFLAGS=-O4 -march=$proc -mcpu=$proc -pipe -fomit-frame-pointer -ffast-math OPTFLAGS=-O4 -march=$proc -mcpu=$proc -pipe -ffast-math # LIBS=-L/usr/lib -L/usr/local/lib $_x11libdir $_gllib $_sdllib $_x11lib $_xvlib X_LIBS=$_x11libdir $_gllib $_sdllib $_x11lib $_xvlib TERMCAP_LIB=$_libtermcap XMM_LIBS = $_xmmplibs LIRC_LIBS = $_lirclibs WIN32_PATH=-DWIN32_PATH=\"$_win32libdir\" EOF # echo 'CFLAGS=$(OPTFLAGS) -Wall -DMPG12PLAY' >> config.mak echo "Creating $CCONF" if [ "$_mmx" = "yes" ]; then _mmx='#define HAVE_MMX' else _mmx='#undef HAVE_MMX' fi if [ $_3dnow = yes ]; then _3dnowm='#define HAVE_3DNOW' else _3dnowm='#undef HAVE_3DNOW' fi if [ $_sse = yes ]; then _ssem='#define HAVE_SSE' else _ssem='#undef HAVE_SSE' fi # --- _vosrc='' if [ $_mlib = yes ]; then _mlib='#define HAVE_MLIB' _vosrc=$_vosrc' yuv2rgb_mlib.c' else _mlib='#undef HAVE_MLIB' fi # --- if [ $_gl = yes ]; then _gl='#define HAVE_GL' _vosrc=$_vosrc' vo_gl.c' else _gl='#undef HAVE_GL' fi if [ $_sdl = yes ]; then _sdldef='#define HAVE_SDL' _vosrc=$_vosrc' vo_sdl.c' else _sdldef='#undef HAVE_SDL' fi if [ $_x11 = yes ]; then _x11='#define HAVE_X11' _vosrc=$_vosrc' vo_x11.c' else _x11='#undef HAVE_X11' fi if [ $_xv = yes ]; then _xv='#define HAVE_XV' _vosrc=$_vosrc' vo_xv.c' else _xv='#undef HAVE_XV' fi # --- if [ $_mga = yes ]; then _mga='#define HAVE_MGA' _vosrc=$_vosrc' vo_mga.c' else _mga='#undef HAVE_MGA' fi if [ $_xmga = yes ]; then _vosrc=$_vosrc' vo_xmga.c' fi if [ $_syncfb = yes ]; then _syncfb='#define HAVE_SYNCFB' _vosrc=$_vosrc' vo_syncfb.c' else _syncfb='#undef HAVE_SYNCFB' fi if [ $_3dfx = yes ]; then _3dfx='#define HAVE_3DFX' _vosrc=$_vosrc' vo_3dfx.c' else _3dfx='#undef HAVE_3DFX' fi if [ $_mpg123 = yes ]; then _mpg123='#define DEFAULT_MPG123' else _mpg123='#undef DEFAULT_MPG123' fi cat > $CCONF << EOF /* -------- Generated by ./configure ----------- */ /* Define this to enable avg. byte/sec-based AVI sync method by default: (use -bps or -nobps commandline option for run-time method selection) */ #undef AVI_SYNC_BPS /* Undefine this if you want soundcard-only timing by default: You can still change this with the -alsa or -noalsa command-line option! (This function was originally impemented to solve ALSA driver's big buffer problems, but it seems to be useful for every soundcard drivers) */ #define ALSA_TIMER /* Undefine this if your soundcard driver has no working select(). If you have kernel Oops, player hangups, or just no audio, you should try to recompile MPlayer with this option disabled! */ #define HAVE_AUDIO_SELECT /* You have a choice for MP3 decoding: mp3lib(mpg123) or Win32(l3codeca.acm) #define this if you prefer mpg123 (with 3Dnow! support) than l3codeca.acm (with mmx/sse optimizations) You can still change it runtime using -afm 1 (mpg123) or -afm 4 (l3codeca)*/ $_mpg123 /* XMMP support: (test code) */ $_xmmpaudio #define LIBDIR "/usr/local/lib" #define PLUGINDIR LIBDIR "/xmmp/Plugins" #define XMMP_AUDIO_DRIVER PLUGINDIR "/Sound/oss.so" /* LIRC (remote control, see www.lirc.org) support: */ $_lircdefs /* Define if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel and VAX). */ /* #define WORDS_BIGENDIAN */ #define ARCH_X86 ///////////////////////////////////////////////////////////////////////////// // // NOTE: Instead of modifying these here, use the --enable/--disable options // of the ./configure script! See ./configure --help for details. // ///////////////////////////////////////////////////////////////////////////// /* termcap flag for getch2.c */ $_termcap /* Extension defines */ $_mlib // available only on solaris $_3dnowm // only define if you have 3DNOW (AMD k6-2, AMD Athlon, iDT WinChip, etc.) $_mmx // only define if you have MMX $_ssem // only define if you have SSE (Intel Pentium III or Celeron II) /* libvo options */ #define SCREEN_SIZE_X $_x #define SCREEN_SIZE_Y $_y $_x11 $_xv $_gl $_sdldef $_3dfx $_mga $_syncfb #if defined(HAVE_GL)||defined(HAVE_X11)|defined(HAVE_XV) #define X11_FULLSCREEN #endif EOF echo "Creating libvo/config.mak" _voobj=`echo $_vosrc | sed -e 's/\.c/\.o/g'` cat > libvo/config.mak << EOF include ../config.mak OPTIONAL_SRCS=$_vosrc OPTIONAL_OBJS=$_voobj EOF echo "Creating libac3/config.mak" if [ $_sse = yes ]; then _downmixc='downmix/downmix_kni.S' _downmixo='downmix/downmix_kni.o' else if [ $_binutils = yes ]; then _downmixc='downmix/downmix_i386.S' _downmixo='downmix/downmix_i386.o' else _downmixc='downmix/downmix.c' _downmixo='downmix/downmix.o' cat << EOF !!! Warning! fallback to slow downmix.c due the old binutils. !!! Upgrade for better audio decoding performance. EOF fi fi cat > libac3/config.mak << EOF include ../config.mak OPTIONAL_SRCS = $_downmixc OPTIONAL_OBJS = $_downmixo EOF echo "Creating mp3lib/config.mak" if [ $_3dnow = yes ]; then _3dnowobjectsrcs='dct36_3dnow.s dct64_3dnow.s decode_3dnow.s' _3dnowobjectobjs='dct36_3dnow.o dct64_3dnow.o decode_3dnow.o' else _3dnowobjectsrcs= _3dnowobjectobjs= fi cat > mp3lib/config.mak << EOF include ../config.mak OPTIONAL_SRCS = $_3dnowobjectsrcs OPTIONAL_OBJS = $_3dnowobjectobjs EOF cat << EOF Config files successfully generated by ./configure ! Please check config.h and config.mak files, tune CPU and optimization flags if you don't like these defaults. You can compile the program with 'make dep;make' and install with 'make install'. Good luck! EOF if [ $_mtrr = yes ]; then echo "Please check mtrr settings at /proc/mtrr (see DOCS/MTRR)" echo fi if [ $_sdl = no ]; then if [ $_have_sdl = yes ]; then echo "You have libSDL installed, but SDL support is disabled by default." echo "If you want to compile MPlayer with SDL support, re-run ./configure" echo "with --enable-sdl. But it's very buggy & experimental code, use it" echo "only if you really need it! And it works(?) *ONLY* with SDL v1.1.7 !" echo "(SDL driver is NOT supported, so do NOT report bugs relating to SDL!)" echo fi fi if [ $_win32libdirnotify = yes ]; then echo "Missing WIN32 codecs dir at $_win32libdir !" echo "Make it and copy DLL files to there! (You can get them from your windows" echo "directory or download ftp://thot.banki.hu/esp-team/linux/MPlayer/w32codec.zip" else echo "Ok, Win32 codecs directory at $_win32libdir already exists." fi