view libao2/ao_sgi.c @ 36984:3f3a415d605b

Move most of TranslateFilename() back to the renderer files. Although it would be nice to share the code (which was the reason for r34263), most of it really doesn't belong to string.c.

/*
 * SGI/IRIX audio output driver
 *
 * copyright (c) 2001 [e-mail]
 *
 * This file is part of MPlayer.
 *
 * MPlayer is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <dmedia/audio.h>

#include "audio_out.h"
#include "audio_out_internal.h"
#include "mp_msg.h"
#include "help_mp.h"
#include "libaf/af_format.h"

static const ao_info_t info =
{
	"sgi audio output",
	"sgi",
	"Oliver Schoenbrunner",
	""
};

LIBAO_EXTERN(sgi)


static ALconfig	ao_config;
static ALport	ao_port;
static int sample_rate;
static int queue_size;
static int bytes_per_frame;

/**
 * \param   [in/out]  format
 * \param   [out]     width
 *
 * \return  the closest matching SGI AL sample format
 *
 * \note    width is set to required per-channel sample width
 *          format is updated to match the SGI AL sample format
 */
static int fmt2sgial(int *format, int *width) {
  int smpfmt = AL_SAMPFMT_TWOSCOMP;

  /* SGI AL only supports float and signed integers in native
   * endianness. If this is something else, we must rely on the audio
   * filter to convert it to a compatible format. */

  /* 24-bit audio is supported, but only with 32-bit alignment.
   * mplayer's 24-bit format is packed, unfortunately.
   * So we must upgrade 24-bit requests to 32 bits. Then we drop the
   * lowest 8 bits during playback. */

  switch(*format) {
  case AF_FORMAT_U8:
  case AF_FORMAT_S8:
    *width = AL_SAMPLE_8;
    *format = AF_FORMAT_S8;
    break;

  case AF_FORMAT_U16_LE:
  case AF_FORMAT_U16_BE:
  case AF_FORMAT_S16_LE:
  case AF_FORMAT_S16_BE:
    *width = AL_SAMPLE_16;
    *format = AF_FORMAT_S16_NE;
    break;

  case AF_FORMAT_U24_LE:
  case AF_FORMAT_U24_BE:
  case AF_FORMAT_S24_LE:
  case AF_FORMAT_S24_BE:
  case AF_FORMAT_U32_LE:
  case AF_FORMAT_U32_BE:
  case AF_FORMAT_S32_LE:
  case AF_FORMAT_S32_BE:
    *width = AL_SAMPLE_24;
    *format = AF_FORMAT_S32_NE;
    break;

  case AF_FORMAT_FLOAT_LE:
  case AF_FORMAT_FLOAT_BE:
    *width = 4;
    *format = AF_FORMAT_FLOAT_NE;
    smpfmt = AL_SAMPFMT_FLOAT;
    break;

  default:
    *width = AL_SAMPLE_16;
    *format = AF_FORMAT_S16_NE;
    break;

  }

  return smpfmt;
}

// to set/get/query special features/parameters
static int control(int cmd, void *arg){

  mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_INFO);

  switch(cmd) {
  case AOCONTROL_QUERY_FORMAT:
    /* Do not reject any format: return the closest matching
     * format if the request is not supported natively. */
    return CONTROL_TRUE;
  }

  return CONTROL_UNKNOWN;
}

// open & setup audio device
// return: 1=success 0=fail
static int init(int rate, int channels, int format, int flags) {

  int smpwidth, smpfmt;
  int rv = AL_DEFAULT_OUTPUT;

  smpfmt = fmt2sgial(&format, &smpwidth);

  mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_InitInfo, rate, (channels > 1) ? "Stereo" : "Mono", af_fmt2str_short(format));

  { /* from /usr/share/src/dmedia/audio/setrate.c */

    double frate, realrate;
    ALpv x[2];

    if(ao_subdevice) {
      rv = alGetResourceByName(AL_SYSTEM, ao_subdevice, AL_OUTPUT_DEVICE_TYPE);
      if (!rv) {
	mp_msg(MSGT_AO, MSGL_ERR, MSGTR_AO_SGI_InvalidDevice);
	return 0;
      }
    }

    frate = rate;

    x[0].param = AL_RATE;
    x[0].value.ll = alDoubleToFixed(rate);
    x[1].param = AL_MASTER_CLOCK;
    x[1].value.i = AL_CRYSTAL_MCLK_TYPE;

    if (alSetParams(rv,x, 2)<0) {
      mp_msg(MSGT_AO, MSGL_WARN, MSGTR_AO_SGI_CantSetParms_Samplerate, alGetErrorString(oserror()));
    }

    if (x[0].sizeOut < 0) {
      mp_msg(MSGT_AO, MSGL_WARN, MSGTR_AO_SGI_CantSetAlRate);
    }

    if (alGetParams(rv,x, 1)<0) {
      mp_msg(MSGT_AO, MSGL_WARN, MSGTR_AO_SGI_CantGetParms, alGetErrorString(oserror()));
    }

    realrate = alFixedToDouble(x[0].value.ll);
    if (frate != realrate) {
      mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_SampleRateInfo, realrate, frate);
    }
    sample_rate = (int)realrate;
  }

  bytes_per_frame = channels * smpwidth;

  ao_data.samplerate = sample_rate;
  ao_data.channels = channels;
  ao_data.format = format;
  ao_data.bps = sample_rate * bytes_per_frame;
  ao_data.buffersize=131072;
  ao_data.outburst = ao_data.buffersize/16;

  ao_config = alNewConfig();

  if (!ao_config) {
    mp_msg(MSGT_AO, MSGL_ERR, MSGTR_AO_SGI_InitConfigError, alGetErrorString(oserror()));
    return 0;
  }

  if(alSetChannels(ao_config, channels) < 0 ||
     alSetWidth(ao_config, smpwidth) < 0 ||
     alSetSampFmt(ao_config, smpfmt) < 0 ||
     alSetQueueSize(ao_config, sample_rate) < 0 ||
     alSetDevice(ao_config, rv) < 0) {
    mp_msg(MSGT_AO, MSGL_ERR, MSGTR_AO_SGI_InitConfigError, alGetErrorString(oserror()));
    return 0;
  }

  ao_port = alOpenPort("mplayer", "w", ao_config);

  if (!ao_port) {
    mp_msg(MSGT_AO, MSGL_ERR, MSGTR_AO_SGI_InitOpenAudioFailed, alGetErrorString(oserror()));
    return 0;
  }

  // printf("ao_sgi, init: port %d config %d\n", ao_port, ao_config);
  queue_size = alGetQueueSize(ao_config);
  return 1;

}

// close audio device
static void uninit(int immed) {

  /* TODO: samplerate should be set back to the value before mplayer was started! */

  mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_Uninit);

  if (ao_config) {
    alFreeConfig(ao_config);
    ao_config = NULL;
  }

  if (ao_port) {
    if (!immed)
    while(alGetFilled(ao_port) > 0) sginap(1);
    alClosePort(ao_port);
    ao_port = NULL;
  }

}

// stop playing and empty buffers (for seeking/pause)
static void reset(void) {

  mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_Reset);

  alDiscardFrames(ao_port, queue_size);
}

// stop playing, keep buffers (for pause)
static void audio_pause(void) {

  mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_PauseInfo);

}

// resume playing, after audio_pause()
static void audio_resume(void) {

  mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_ResumeInfo);

}

// return: how many bytes can be played without blocking
static int get_space(void) {

  // printf("ao_sgi, get_space: (ao_outburst %d)\n", ao_data.outburst);
  // printf("ao_sgi, get_space: alGetFillable [%d] \n", alGetFillable(ao_port));

  return alGetFillable(ao_port) * bytes_per_frame;

}


// plays 'len' bytes of 'data'
// it should round it down to outburst*n
// return: number of bytes played
static int play(void* data, int len, int flags) {

  /* Always process data in quadword-aligned chunks (64-bits). */
  const int plen = len / (sizeof(uint64_t) * bytes_per_frame);
  const int framecount = plen * sizeof(uint64_t);

  // printf("ao_sgi, play: len %d flags %d (%d %d)\n", len, flags, ao_port, ao_config);
  // printf("channels %d\n", ao_data.channels);

  if(ao_data.format == AF_FORMAT_S32_NE) {
    /* The zen of this is explained in fmt2sgial() */
    int32_t *smpls = data;
    const int32_t *smple = smpls + (framecount * ao_data.channels);
    while(smpls < smple)
      *smpls++ >>= 8;
  }

  alWriteFrames(ao_port, data, framecount);

  return framecount * bytes_per_frame;

}

// return: delay in seconds between first and last sample in buffer
static float get_delay(void){

  // printf("ao_sgi, get_delay: (ao_buffersize %d)\n", ao_buffersize);

  // return  (float)queue_size/((float)sample_rate);
  const int outstanding = alGetFilled(ao_port);
  return (float)((outstanding < 0) ? queue_size : outstanding) /
    ((float)sample_rate);
}