Mercurial > mplayer.hg
view vidix/sis_vid.c @ 36242:406e87858d1f
Remove unused depth test code.
| author | reimar |
|---|---|
| date | Wed, 12 Jun 2013 18:54:15 +0000 |
| parents | 72e4e8f983f9 |
| children | 945eab072c9d |
line wrap: on
line source
/* * VIDIX driver for SiS chipsets. * Based on SiS Xv driver * * Copyright (C) 2003 Jake Page, Sugar Media * Copyright 2002-2003 by Thomas Winischhofer, Vienna, Austria * 2003/10/08 integrated into mplayer/vidix architecture -- Alex Beregszaszi * * This file is part of MPlayer. * * MPlayer is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * MPlayer is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with MPlayer; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <inttypes.h> #include <unistd.h> #include "config.h" #include "vidix.h" #include "fourcc.h" #include "dha.h" #include "pci_ids.h" #include "pci_names.h" #include "sis_bridge.h" #include "sis_regs.h" #include "sis_defs.h" /** Random defines **/ #define WATCHDOG_DELAY 500000 /* Watchdog counter for retrace waiting */ #define IMAGE_MIN_WIDTH 32 /* Min and max source image sizes */ #define IMAGE_MIN_HEIGHT 24 #define IMAGE_MAX_WIDTH 720 #define IMAGE_MAX_HEIGHT 576 #define IMAGE_MAX_WIDTH_M650 1920 #define IMAGE_MAX_HEIGHT_M650 1080 #define OVERLAY_MIN_WIDTH 32 /* Minimum overlay sizes */ #define OVERLAY_MIN_HEIGHT 24 #define DISPMODE_SINGLE1 0x1 /* TW: CRT1 only */ #define DISPMODE_SINGLE2 0x2 /* TW: CRT2 only */ #define DISPMODE_MIRROR 0x4 /* TW: CRT1 + CRT2 MIRROR */ #define VMODE_INTERLACED 0x1 #define VMODE_DOUBLESCAN 0x2 typedef struct { short x1, y1, x2, y2; } BoxRec; typedef struct { int pixelFormat; uint16_t pitch; uint16_t origPitch; uint8_t keyOP; uint16_t HUSF; uint16_t VUSF; uint8_t IntBit; uint8_t wHPre; uint16_t srcW; uint16_t srcH; BoxRec dstBox; uint32_t PSY; uint32_t PSV; uint32_t PSU; uint8_t bobEnable; uint8_t contrastCtrl; uint8_t contrastFactor; uint8_t lineBufSize; uint8_t(*VBlankActiveFunc)(void); uint16_t SCREENheight; } SISOverlayRec, *SISOverlayPtr; /** static variable definitions **/ static int sis_probed = 0; static pciinfo_t pci_info; unsigned int sis_verbose = 0; static void *sis_mem_base; /* static void *sis_reg_base; */ unsigned short sis_iobase; unsigned int sis_vga_engine = UNKNOWN_VGA; static unsigned int sis_displaymode = DISPMODE_SINGLE1; static unsigned int sis_has_two_overlays = 0; static unsigned int sis_bridge_is_slave = 0; static unsigned int sis_shift_value = 1; static unsigned int sis_vmode = 0; unsigned int sis_vbflags = DISPTYPE_DISP1; unsigned int sis_overlay_on_crt1 = 1; int sis_crt1_off = -1; unsigned int sis_detected_crt2_devices; unsigned int sis_force_crt2_type = CRT2_DEFAULT; int sis_device_id = -1; static int sis_format; static int sis_Yoff = 0; static int sis_Voff = 0; static int sis_Uoff = 0; static int sis_screen_width = 640; static int sis_screen_height = 480; static int sis_frames[VID_PLAY_MAXFRAMES]; static vidix_grkey_t sis_grkey; static vidix_capability_t sis_cap = { "SiS 300/310/325 Video Driver", "Jake Page", TYPE_OUTPUT, {0, 0, 0, 0}, 2048, 2048, 4, 4, -1, FLAG_UPSCALER | FLAG_DOWNSCALER | FLAG_EQUALIZER, VENDOR_SIS, -1, {0, 0, 0, 0} }; static vidix_video_eq_t sis_equal = { VEQ_CAP_BRIGHTNESS | VEQ_CAP_CONTRAST, 200, 0, 0, 0, 0, 0, 0, 0 }; static unsigned short sis_card_ids[] = { DEVICE_SIS_300, DEVICE_SIS_315H, DEVICE_SIS_315, DEVICE_SIS_315PRO, DEVICE_SIS_330, DEVICE_SIS_540_VGA, DEVICE_SIS_550_VGA, DEVICE_SIS_630_VGA, DEVICE_SIS_650_VGA }; /** function declarations **/ static void set_overlay(SISOverlayPtr pOverlay, int index); static void close_overlay(void); static void calc_scale_factor(SISOverlayPtr pOverlay, int index, int iscrt2); static void set_line_buf_size(SISOverlayPtr pOverlay); static void merge_line_buf(int enable); static void set_format(SISOverlayPtr pOverlay); static void set_colorkey(void); static void set_brightness(uint8_t brightness); static void set_contrast(uint8_t contrast); static void set_saturation(char saturation); static void set_hue(uint8_t hue); /* IO Port access functions */ static uint8_t getvideoreg(uint8_t reg) { uint8_t ret; inSISIDXREG(SISVID, reg, ret); return ret; } static void setvideoreg(uint8_t reg, uint8_t data) { outSISIDXREG(SISVID, reg, data); } static void setvideoregmask(uint8_t reg, uint8_t data, uint8_t mask) { uint8_t old; inSISIDXREG(SISVID, reg, old); data = (data & mask) | (old & (~mask)); outSISIDXREG(SISVID, reg, data); } static void setsrregmask(uint8_t reg, uint8_t data, uint8_t mask) { uint8_t old; inSISIDXREG(SISSR, reg, old); data = (data & mask) | (old & (~mask)); outSISIDXREG(SISSR, reg, data); } /* vblank checking*/ static uint8_t vblank_active_CRT1(void) { /* this may be too simplistic? */ return inSISREG(SISINPSTAT) & 0x08; } static uint8_t vblank_active_CRT2(void) { uint8_t ret; if (sis_vga_engine == SIS_315_VGA) { inSISIDXREG(SISPART1, Index_310_CRT2_FC_VR, ret); } else { inSISIDXREG(SISPART1, Index_CRT2_FC_VR, ret); } return (ret & 0x02) ^ 0x02; } static int find_chip(unsigned chip_id) { unsigned i; for (i = 0; i < sizeof(sis_card_ids) / sizeof(unsigned short); i++) { if (chip_id == sis_card_ids[i]) return i; } return -1; } static int sis_probe(int verbose, int force) { pciinfo_t lst[MAX_PCI_DEVICES]; unsigned i, num_pci; int err; sis_verbose = verbose; force = force; err = pci_scan(lst, &num_pci); if (err) { printf("[SiS] Error occurred during pci scan: %s\n", strerror(err)); return err; } else { err = ENXIO; for (i = 0; i < num_pci; i++) { if (lst[i].vendor == VENDOR_SIS) { int idx; const char *dname; idx = find_chip(lst[i].device); if (idx == -1) continue; dname = pci_device_name(VENDOR_SIS, lst[i].device); dname = dname ? dname : "Unknown chip"; if (sis_verbose > 0) printf("[SiS] Found chip: %s (0x%X)\n", dname, lst[i].device); sis_device_id = sis_cap.device_id = lst[i].device; err = 0; memcpy(&pci_info, &lst[i], sizeof(pciinfo_t)); sis_has_two_overlays = 0; switch (sis_cap.device_id) { case DEVICE_SIS_300: case DEVICE_SIS_630_VGA: sis_has_two_overlays = 1; case DEVICE_SIS_540_VGA: sis_vga_engine = SIS_300_VGA; break; case DEVICE_SIS_330: case DEVICE_SIS_550_VGA: sis_has_two_overlays = 1; case DEVICE_SIS_315H: case DEVICE_SIS_315: case DEVICE_SIS_315PRO: case DEVICE_SIS_650_VGA: /* M650 & 651 have 2 overlays */ /* JCP: I think this works, but not really tested yet */ if (enable_app_io() == 0 ) { unsigned char CR5F; unsigned char tempreg1, tempreg2; inSISIDXREG(SISCR, 0x5F, CR5F); CR5F &= 0xf0; andSISIDXREG(SISCR, 0x5c, 0x07); inSISIDXREG(SISCR, 0x5c, tempreg1); tempreg1 &= 0xf8; setSISIDXREG(SISCR, 0x5c, 0x07, 0xf8); inSISIDXREG(SISCR, 0x5c, tempreg2); tempreg2 &= 0xf8; if ((!tempreg1) || (tempreg2)) { if (CR5F & 0x80) { sis_has_two_overlays = 1; } } else { sis_has_two_overlays = 1; /* ? */ } if (sis_has_two_overlays) { if (sis_verbose > 0) printf ("[SiS] detected M650/651 with 2 overlays\n"); } disable_app_io(); } sis_vga_engine = SIS_315_VGA; break; default: /* should never get here */ sis_vga_engine = UNKNOWN_VGA; break; } } } } if (err && sis_verbose) { printf("[SiS] Can't find chip\n"); } else { sis_probed = 1; } return err; } static int sis_init(void) { uint8_t sr_data, cr_data, cr_data2; char *env_overlay_crt; if (!sis_probed) { printf("[SiS] driver was not probed but is being initialized\n"); return EINTR; } if (enable_app_io() != 0) { printf("[SiS] can't enable register I/O\n"); return EINTR; } /* JCP: this is WRONG. Need to coordinate w/ sisfb to use correct mem */ /* map 16MB scary hack for now. */ sis_mem_base = map_phys_mem(pci_info.base0, 0x1000000); /* sis_reg_base = map_phys_mem(pci_info.base1, 0x20000); */ sis_iobase = pci_info.base2 & 0xFFFC; /* would like to use fb ioctl - or some other method - here to get current resolution. */ inSISIDXREG(SISCR, 0x12, cr_data); inSISIDXREG(SISCR, 0x07, cr_data2); sis_screen_height = ((cr_data & 0xff) | ((uint16_t) (cr_data2 & 0x02) << 7) | ((uint16_t) (cr_data2 & 0x40) << 3) | ((uint16_t) (cr_data & 0x02) << 9)) + 1; inSISIDXREG(SISSR, 0x0b, sr_data); inSISIDXREG(SISCR, 0x01, cr_data); sis_screen_width = (((cr_data & 0xff) | ((uint16_t) (sr_data & 0x0C) << 6)) + 1) * 8; inSISIDXREG(SISSR, Index_SR_Graphic_Mode, sr_data); if (sr_data & 0x20) /* interlaced mode */ sis_vmode |= VMODE_INTERLACED; /* JCP: eventually I'd like to replace this with a call to sisfb SISFB_GET_INFO ioctl to get video bridge info. Not for now, since it requires a very new and not widely distributed version. */ sis_init_video_bridge(); env_overlay_crt = getenv("VIDIX_CRT"); if (env_overlay_crt) { int crt = atoi(env_overlay_crt); if (crt == 1 || crt == 2) { sis_overlay_on_crt1 = (crt == 1); if (sis_verbose > 0) { printf ("[SiS] override: using overlay on CRT%d from VIDIX_CRT\n", crt); } } } return 0; } static void sis_destroy(void) { /* unmap_phys_mem(sis_reg_base, 0x20000); */ /* JCP: see above, hence also a hack. */ unmap_phys_mem(sis_mem_base, 0x1000000); disable_app_io(); } static int sis_get_caps(vidix_capability_t * to) { memcpy(to, &sis_cap, sizeof(vidix_capability_t)); return 0; } static int is_supported_fourcc(uint32_t fourcc) { switch (fourcc) { case IMGFMT_YV12: case IMGFMT_I420: case IMGFMT_UYVY: case IMGFMT_YUY2: case IMGFMT_RGB15: case IMGFMT_RGB16: return 1; default: return 0; } } static int sis_query_fourcc(vidix_fourcc_t * to) { if (is_supported_fourcc(to->fourcc)) { to->depth = VID_DEPTH_8BPP | VID_DEPTH_16BPP | VID_DEPTH_32BPP; to->flags = VID_CAP_EXPAND | VID_CAP_SHRINK | VID_CAP_COLORKEY; return 0; } else to->depth = to->flags = 0; return ENOSYS; } static int bridge_in_slave_mode(void) { unsigned char usScratchP1_00; if (!(sis_vbflags & VB_VIDEOBRIDGE)) return 0; inSISIDXREG(SISPART1, 0x00, usScratchP1_00); if (((sis_vga_engine == SIS_300_VGA) && (usScratchP1_00 & 0xa0) == 0x20) || ((sis_vga_engine == SIS_315_VGA) && (usScratchP1_00 & 0x50) == 0x10)) { return 1; } else { return 0; } } /* This does not handle X dual head mode, since 1) vidix doesn't support it and 2) it doesn't make sense for other gfx drivers */ static void set_dispmode(void) { sis_bridge_is_slave = 0; if (bridge_in_slave_mode()) sis_bridge_is_slave = 1; if ((sis_vbflags & VB_DISPMODE_MIRROR) || (sis_bridge_is_slave && (sis_vbflags & DISPTYPE_DISP2))) { if (sis_has_two_overlays) sis_displaymode = DISPMODE_MIRROR; /* TW: CRT1+CRT2 (2 overlays) */ else if (!sis_overlay_on_crt1) sis_displaymode = DISPMODE_SINGLE2; else sis_displaymode = DISPMODE_SINGLE1; } else { if (sis_vbflags & DISPTYPE_DISP1) { sis_displaymode = DISPMODE_SINGLE1; /* TW: CRT1 only */ } else { sis_displaymode = DISPMODE_SINGLE2; /* TW: CRT2 only */ } } } static void set_disptype_regs(void) { switch (sis_displaymode) { case DISPMODE_SINGLE1: /* TW: CRT1 only */ if (sis_verbose > 2) { printf("[SiS] Setting up overlay on CRT1\n"); } if (sis_has_two_overlays) { setsrregmask(0x06, 0x00, 0xc0); setsrregmask(0x32, 0x00, 0xc0); } else { setsrregmask(0x06, 0x00, 0xc0); setsrregmask(0x32, 0x00, 0xc0); } break; case DISPMODE_SINGLE2: /* TW: CRT2 only */ if (sis_verbose > 2) { printf("[SiS] Setting up overlay on CRT2\n"); } if (sis_has_two_overlays) { setsrregmask(0x06, 0x80, 0xc0); setsrregmask(0x32, 0x80, 0xc0); } else { setsrregmask(0x06, 0x40, 0xc0); setsrregmask(0x32, 0x40, 0xc0); } break; case DISPMODE_MIRROR: /* TW: CRT1 + CRT2 */ default: if (sis_verbose > 2) { printf("[SiS] Setting up overlay on CRT1 AND CRT2!\n"); } setsrregmask(0x06, 0x80, 0xc0); setsrregmask(0x32, 0x80, 0xc0); break; } } static void init_overlay(void) { /* Initialize first overlay (CRT1) */ /* Write-enable video registers */ setvideoregmask(Index_VI_Control_Misc2, 0x80, 0x81); /* Disable overlay */ setvideoregmask(Index_VI_Control_Misc0, 0x00, 0x02); /* Disable bobEnable */ setvideoregmask(Index_VI_Control_Misc1, 0x02, 0x02); /* Reset scale control and contrast */ setvideoregmask(Index_VI_Scale_Control, 0x60, 0x60); setvideoregmask(Index_VI_Contrast_Enh_Ctrl, 0x04, 0x1F); setvideoreg(Index_VI_Disp_Y_Buf_Preset_Low, 0x00); setvideoreg(Index_VI_Disp_Y_Buf_Preset_Middle, 0x00); setvideoreg(Index_VI_UV_Buf_Preset_Low, 0x00); setvideoreg(Index_VI_UV_Buf_Preset_Middle, 0x00); setvideoreg(Index_VI_Disp_Y_UV_Buf_Preset_High, 0x00); setvideoreg(Index_VI_Play_Threshold_Low, 0x00); setvideoreg(Index_VI_Play_Threshold_High, 0x00); /* may not want to init these here, could already be set to other values by app? */ setvideoregmask(Index_VI_Control_Misc2, 0x00, 0x01); setvideoregmask(Index_VI_Contrast_Enh_Ctrl, 0x04, 0x07); setvideoreg(Index_VI_Brightness, 0x20); if (sis_vga_engine == SIS_315_VGA) { setvideoreg(Index_VI_Hue, 0x00); setvideoreg(Index_VI_Saturation, 0x00); } /* Initialize second overlay (CRT2) */ if (sis_has_two_overlays) { /* Write-enable video registers */ setvideoregmask(Index_VI_Control_Misc2, 0x81, 0x81); /* Disable overlay */ setvideoregmask(Index_VI_Control_Misc0, 0x00, 0x02); /* Disable bobEnable */ setvideoregmask(Index_VI_Control_Misc1, 0x02, 0x02); /* Reset scale control and contrast */ setvideoregmask(Index_VI_Scale_Control, 0x60, 0x60); setvideoregmask(Index_VI_Contrast_Enh_Ctrl, 0x04, 0x1F); setvideoreg(Index_VI_Disp_Y_Buf_Preset_Low, 0x00); setvideoreg(Index_VI_Disp_Y_Buf_Preset_Middle, 0x00); setvideoreg(Index_VI_UV_Buf_Preset_Low, 0x00); setvideoreg(Index_VI_UV_Buf_Preset_Middle, 0x00); setvideoreg(Index_VI_Disp_Y_UV_Buf_Preset_High, 0x00); setvideoreg(Index_VI_Play_Threshold_Low, 0x00); setvideoreg(Index_VI_Play_Threshold_High, 0x00); setvideoregmask(Index_VI_Control_Misc2, 0x01, 0x01); setvideoregmask(Index_VI_Contrast_Enh_Ctrl, 0x04, 0x07); setvideoreg(Index_VI_Brightness, 0x20); if (sis_vga_engine == SIS_315_VGA) { setvideoreg(Index_VI_Hue, 0x00); setvideoreg(Index_VI_Saturation, 0x00); } } } static int sis_set_eq(const vidix_video_eq_t * eq); static int sis_config_playback(vidix_playback_t * info) { SISOverlayRec overlay; int srcOffsetX = 0, srcOffsetY = 0; int sx, sy; int index = 0, iscrt2 = 0; int total_size; short src_w, drw_w; short src_h, drw_h; short src_x, drw_x; short src_y, drw_y; long dga_offset; int pitch; unsigned int i; if (!is_supported_fourcc(info->fourcc)) return -1; /* set chipset/engine.dependent config info */ /* which CRT to use, etc.? */ switch (sis_vga_engine) { case SIS_315_VGA: sis_shift_value = 1; sis_equal.cap |= VEQ_CAP_SATURATION | VEQ_CAP_HUE; break; case SIS_300_VGA: default: sis_shift_value = 2; break; } sis_displaymode = DISPMODE_SINGLE1; /* xV driver code in set_dispmode() */ set_dispmode(); set_disptype_regs(); init_overlay(); /* get basic dimension info */ src_x = info->src.x; src_y = info->src.y; src_w = info->src.w; src_h = info->src.h; drw_x = info->dest.x; drw_y = info->dest.y; drw_w = info->dest.w; drw_h = info->dest.h; switch (info->fourcc) { case IMGFMT_YV12: case IMGFMT_I420: pitch = (src_w + 7) & ~7; total_size = (pitch * src_h * 3) >> 1; break; case IMGFMT_YUY2: case IMGFMT_UYVY: case IMGFMT_RGB15: case IMGFMT_RGB16: pitch = ((src_w << 1) + 3) & ~3; total_size = pitch * src_h; break; default: return -1; } /* "allocate" memory for overlay! */ /* start at 8MB = sisfb's "dri reserved space" - really shouldn't hardcode though */ /* XXX: JCP - this can use the sisfb FBIO_ALLOC ioctl to safely allocate "video heap" memory... */ dga_offset = 0x800000; /* use 7MB for now. need to calc/get real info from sisfb? */ /* this can result in a LOT of frames - probably not necessary */ info->num_frames = 0x700000 / (total_size * 2); if (info->num_frames > VID_PLAY_MAXFRAMES) info->num_frames = VID_PLAY_MAXFRAMES; info->dga_addr = sis_mem_base + dga_offset; info->dest.pitch.y = 16; info->dest.pitch.u = 16; info->dest.pitch.v = 16; info->offset.y = 0; info->offset.u = 0; info->offset.v = 0; info->frame_size = (total_size * 2); /* why times 2 ? */ for (i = 0; i < info->num_frames; i++) { info->offsets[i] = info->frame_size * i; /* save ptrs to mem buffers */ sis_frames[i] = (dga_offset + info->offsets[i]); } memset(&overlay, 0, sizeof(overlay)); overlay.pixelFormat = sis_format = info->fourcc; overlay.pitch = overlay.origPitch = pitch; overlay.keyOP = (sis_grkey.ckey.op == CKEY_TRUE ? VI_ROP_DestKey : VI_ROP_Always); overlay.bobEnable = 0x00; overlay.SCREENheight = sis_screen_height; /* probably will not support X virtual screen > phys very well? */ overlay.dstBox.x1 = drw_x; /* - pScrn->frameX0; */ overlay.dstBox.x2 = drw_x + drw_w; /* - pScrn->frameX0; ??? */ overlay.dstBox.y1 = drw_y; /* - pScrn->frameY0; */ overlay.dstBox.y2 = drw_y + drw_h; /* - pScrn->frameY0; ??? */ if ((overlay.dstBox.x1 > overlay.dstBox.x2) || (overlay.dstBox.y1 > overlay.dstBox.y2)) return -1; if ((overlay.dstBox.x2 < 0) || (overlay.dstBox.y2 < 0)) return -1; if (overlay.dstBox.x1 < 0) { srcOffsetX = src_w * (-overlay.dstBox.x1) / drw_w; overlay.dstBox.x1 = 0; } if (overlay.dstBox.y1 < 0) { srcOffsetY = src_h * (-overlay.dstBox.y1) / drw_h; overlay.dstBox.y1 = 0; } switch (info->fourcc) { case IMGFMT_YV12: info->dest.pitch.y = 16; sx = (src_x + srcOffsetX) & ~7; sy = (src_y + srcOffsetY) & ~1; info->offset.y = sis_Yoff = sx + sy * pitch; /* JCP: NOTE reversed u & v here! Not sure why this is needed. maybe mplayer & sis define U & V differently?? */ info->offset.u = sis_Voff = src_h * pitch + ((sx + sy * pitch / 2) >> 1); info->offset.v = sis_Uoff = src_h * pitch * 5 / 4 + ((sx + sy * pitch / 2) >> 1); overlay.PSY = (sis_frames[0] + sis_Yoff) >> sis_shift_value; overlay.PSV = (sis_frames[0] + sis_Voff) >> sis_shift_value; overlay.PSU = (sis_frames[0] + sis_Uoff) >> sis_shift_value; break; case IMGFMT_I420: sx = (src_x + srcOffsetX) & ~7; sy = (src_y + srcOffsetY) & ~1; info->offset.y = sis_Yoff = sx + sy * pitch; /* JCP: see above... */ info->offset.u = sis_Voff = src_h * pitch * 5 / 4 + ((sx + sy * pitch / 2) >> 1); info->offset.v = sis_Uoff = src_h * pitch + ((sx + sy * pitch / 2) >> 1); overlay.PSY = (sis_frames[0] + sis_Yoff) >> sis_shift_value; overlay.PSV = (sis_frames[0] + sis_Voff) >> sis_shift_value; overlay.PSU = (sis_frames[0] + sis_Uoff) >> sis_shift_value; break; case IMGFMT_YUY2: case IMGFMT_UYVY: case IMGFMT_RGB16: case IMGFMT_RGB15: default: sx = (src_x + srcOffsetX) & ~1; sy = (src_y + srcOffsetY); info->offset.y = sis_Yoff = sx * 2 + sy * pitch; overlay.PSY = (sis_frames[0] + sis_Yoff) >> sis_shift_value; break; } /* FIXME: is it possible that srcW < 0? */ overlay.srcW = src_w - (sx - src_x); overlay.srcH = src_h - (sy - src_y); /* set merge line buffer */ merge_line_buf(overlay.srcW > 384); /* calculate line buffer length */ set_line_buf_size(&overlay); if (sis_displaymode == DISPMODE_SINGLE2) { if (sis_has_two_overlays) { /* TW: On chips with two overlays we use * overlay 2 for CRT2 */ index = 1; iscrt2 = 1; } else { /* TW: On chips with only one overlay we * use that only overlay for CRT2 */ index = 0; iscrt2 = 1; } overlay.VBlankActiveFunc = vblank_active_CRT2; /* overlay.GetScanLineFunc = get_scanline_CRT2; */ } else { index = 0; iscrt2 = 0; overlay.VBlankActiveFunc = vblank_active_CRT1; /* overlay.GetScanLineFunc = get_scanline_CRT1; */ } /* calc scale factor (to use below) */ calc_scale_factor(&overlay, index, iscrt2); /* Select video1 (used for CRT1) or video2 (used for CRT2) */ setvideoregmask(Index_VI_Control_Misc2, index, 0x01); set_format(&overlay); set_colorkey(); sis_set_eq(&sis_equal); /* set up video overlay registers */ set_overlay(&overlay, index); /* prevent badness if bits are not at default setting */ setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x01); setvideoregmask(Index_VI_Control_Misc2, 0x00, 0x04); /* JCP: Xv driver implementation loops back over above code to setup mirror CRT2 */ return 0; } static int sis_playback_on(void) { setvideoregmask(Index_VI_Control_Misc0, 0x02, 0x02); return 0; } static int sis_playback_off(void) { unsigned char sridx, cridx; sridx = inSISREG(SISSR); cridx = inSISREG(SISCR); close_overlay(); outSISREG(SISSR, sridx); outSISREG(SISCR, cridx); return 0; } static int sis_frame_select(unsigned int frame) { uint8_t data; int index = 0; uint32_t PSY; if (sis_displaymode == DISPMODE_SINGLE2 && sis_has_two_overlays) { index = 1; } PSY = (sis_frames[frame] + sis_Yoff) >> sis_shift_value; /* Unlock address registers */ data = getvideoreg(Index_VI_Control_Misc1); setvideoreg(Index_VI_Control_Misc1, data | 0x20); /* TEST: Is this required? */ setvideoreg(Index_VI_Control_Misc1, data | 0x20); /* TEST end */ /* TEST: Is this required? */ if (sis_vga_engine == SIS_315_VGA) setvideoreg(Index_VI_Control_Misc3, 0x00); /* TEST end */ /* set Y start address */ setvideoreg(Index_VI_Disp_Y_Buf_Start_Low, (uint8_t) (PSY)); setvideoreg(Index_VI_Disp_Y_Buf_Start_Middle, (uint8_t) ((PSY) >> 8)); setvideoreg(Index_VI_Disp_Y_Buf_Start_High, (uint8_t) ((PSY) >> 16)); /* set 310/325 series overflow bits for Y plane */ if (sis_vga_engine == SIS_315_VGA) { setvideoreg(Index_VI_Y_Buf_Start_Over, ((uint8_t) ((PSY) >> 24) & 0x01)); } /* Set U/V data if using plane formats */ if ((sis_format == IMGFMT_YV12) || (sis_format == IMGFMT_I420)) { uint32_t PSU, PSV; PSU = (sis_frames[frame] + sis_Uoff) >> sis_shift_value; PSV = (sis_frames[frame] + sis_Voff) >> sis_shift_value; /* set U/V start address */ setvideoreg(Index_VI_U_Buf_Start_Low, (uint8_t) PSU); setvideoreg(Index_VI_U_Buf_Start_Middle, (uint8_t) (PSU >> 8)); setvideoreg(Index_VI_U_Buf_Start_High, (uint8_t) (PSU >> 16)); setvideoreg(Index_VI_V_Buf_Start_Low, (uint8_t) PSV); setvideoreg(Index_VI_V_Buf_Start_Middle, (uint8_t) (PSV >> 8)); setvideoreg(Index_VI_V_Buf_Start_High, (uint8_t) (PSV >> 16)); /* 310/325 series overflow bits */ if (sis_vga_engine == SIS_315_VGA) { setvideoreg(Index_VI_U_Buf_Start_Over, ((uint8_t) (PSU >> 24) & 0x01)); setvideoreg(Index_VI_V_Buf_Start_Over, ((uint8_t) (PSV >> 24) & 0x01)); } } if (sis_vga_engine == SIS_315_VGA) { /* Trigger register copy for 310 series */ setvideoreg(Index_VI_Control_Misc3, 1 << index); } /* Lock the address registers */ setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x20); return 0; } static int sis_get_gkeys(vidix_grkey_t * grkey) { memcpy(grkey, &sis_grkey, sizeof(vidix_grkey_t)); return 0; } static int sis_set_gkeys(const vidix_grkey_t * grkey) { memcpy(&sis_grkey, grkey, sizeof(vidix_grkey_t)); set_colorkey(); return 0; } static int sis_get_eq(vidix_video_eq_t * eq) { memcpy(eq, &sis_equal, sizeof(vidix_video_eq_t)); return 0; } static int sis_set_eq(const vidix_video_eq_t * eq) { int br, sat, cr, hue; if (eq->cap & VEQ_CAP_BRIGHTNESS) sis_equal.brightness = eq->brightness; if (eq->cap & VEQ_CAP_CONTRAST) sis_equal.contrast = eq->contrast; if (eq->cap & VEQ_CAP_SATURATION) sis_equal.saturation = eq->saturation; if (eq->cap & VEQ_CAP_HUE) sis_equal.hue = eq->hue; if (eq->cap & VEQ_CAP_RGB_INTENSITY) { sis_equal.red_intensity = eq->red_intensity; sis_equal.green_intensity = eq->green_intensity; sis_equal.blue_intensity = eq->blue_intensity; } sis_equal.flags = eq->flags; cr = (sis_equal.contrast + 1000) * 7 / 2000; if (cr < 0) cr = 0; if (cr > 7) cr = 7; br = sis_equal.brightness * 127 / 1000; if (br < -128) br = -128; if (br > 127) br = 127; sat = (sis_equal.saturation * 7) / 1000; if (sat < -7) sat = -7; if (sat > 7) sat = 7; hue = sis_equal.hue * 7 / 1000; if (hue < -8) hue = -8; if (hue > 7) hue = 7; set_brightness(br); set_contrast(cr); if (sis_vga_engine == SIS_315_VGA) { set_saturation(sat); set_hue(hue); } return 0; } static void set_overlay(SISOverlayPtr pOverlay, int index) { uint16_t pitch = 0; uint8_t h_over = 0, v_over = 0; uint16_t top, bottom, left, right; uint16_t screenX = sis_screen_width; uint16_t screenY = sis_screen_height; uint8_t data; uint32_t watchdog; top = pOverlay->dstBox.y1; bottom = pOverlay->dstBox.y2; if (bottom > screenY) { bottom = screenY; } left = pOverlay->dstBox.x1; right = pOverlay->dstBox.x2; if (right > screenX) { right = screenX; } /* JCP: these aren't really tested... */ /* TW: DoubleScan modes require Y coordinates * 2 */ if (sis_vmode & VMODE_DOUBLESCAN) { top <<= 1; bottom <<= 1; } /* TW: Interlace modes require Y coordinates / 2 */ if (sis_vmode & VMODE_INTERLACED) { top >>= 1; bottom >>= 1; } h_over = (((left >> 8) & 0x0f) | ((right >> 4) & 0xf0)); v_over = (((top >> 8) & 0x0f) | ((bottom >> 4) & 0xf0)); pitch = pOverlay->pitch >> sis_shift_value; /* set line buffer size */ setvideoreg(Index_VI_Line_Buffer_Size, pOverlay->lineBufSize); /* set color key mode */ setvideoregmask(Index_VI_Key_Overlay_OP, pOverlay->keyOP, 0x0F); /* TW: We don't have to wait for vertical retrace in all cases */ /* JCP: be safe for now. */ if (1 /*pPriv->mustwait */ ) { watchdog = WATCHDOG_DELAY; while (pOverlay->VBlankActiveFunc() && --watchdog); watchdog = WATCHDOG_DELAY; while ((!pOverlay->VBlankActiveFunc()) && --watchdog); if (!watchdog && sis_verbose > 0) { printf("[SiS]: timed out waiting for vertical retrace\n"); } } /* Unlock address registers */ data = getvideoreg(Index_VI_Control_Misc1); setvideoreg(Index_VI_Control_Misc1, data | 0x20); /* TEST: Is this required? */ setvideoreg(Index_VI_Control_Misc1, data | 0x20); /* TEST end */ /* TEST: Is this required? */ if (sis_vga_engine == SIS_315_VGA) setvideoreg(Index_VI_Control_Misc3, 0x00); /* TEST end */ /* Set Y buf pitch */ setvideoreg(Index_VI_Disp_Y_Buf_Pitch_Low, (uint8_t) (pitch)); setvideoregmask(Index_VI_Disp_Y_UV_Buf_Pitch_Middle, (uint8_t) (pitch >> 8), 0x0f); /* Set Y start address */ setvideoreg(Index_VI_Disp_Y_Buf_Start_Low, (uint8_t) (pOverlay->PSY)); setvideoreg(Index_VI_Disp_Y_Buf_Start_Middle, (uint8_t) ((pOverlay->PSY) >> 8)); setvideoreg(Index_VI_Disp_Y_Buf_Start_High, (uint8_t) ((pOverlay->PSY) >> 16)); /* set 310/325 series overflow bits for Y plane */ if (sis_vga_engine == SIS_315_VGA) { setvideoreg(Index_VI_Disp_Y_Buf_Pitch_High, (uint8_t) (pitch >> 12)); setvideoreg(Index_VI_Y_Buf_Start_Over, ((uint8_t) ((pOverlay->PSY) >> 24) & 0x01)); } /* Set U/V data if using plane formats */ if ((pOverlay->pixelFormat == IMGFMT_YV12) || (pOverlay->pixelFormat == IMGFMT_I420)) { uint32_t PSU, PSV; PSU = pOverlay->PSU; PSV = pOverlay->PSV; /* Set U/V pitch */ setvideoreg(Index_VI_Disp_UV_Buf_Pitch_Low, (uint8_t) (pitch >> 1)); setvideoregmask(Index_VI_Disp_Y_UV_Buf_Pitch_Middle, (uint8_t) (pitch >> 5), 0xf0); /* set U/V start address */ setvideoreg(Index_VI_U_Buf_Start_Low, (uint8_t) PSU); setvideoreg(Index_VI_U_Buf_Start_Middle, (uint8_t) (PSU >> 8)); setvideoreg(Index_VI_U_Buf_Start_High, (uint8_t) (PSU >> 16)); setvideoreg(Index_VI_V_Buf_Start_Low, (uint8_t) PSV); setvideoreg(Index_VI_V_Buf_Start_Middle, (uint8_t) (PSV >> 8)); setvideoreg(Index_VI_V_Buf_Start_High, (uint8_t) (PSV >> 16)); /* 310/325 series overflow bits */ if (sis_vga_engine == SIS_315_VGA) { setvideoreg(Index_VI_Disp_UV_Buf_Pitch_High, (uint8_t) (pitch >> 13)); setvideoreg(Index_VI_U_Buf_Start_Over, ((uint8_t) (PSU >> 24) & 0x01)); setvideoreg(Index_VI_V_Buf_Start_Over, ((uint8_t) (PSV >> 24) & 0x01)); } } if (sis_vga_engine == SIS_315_VGA) { /* Trigger register copy for 310 series */ setvideoreg(Index_VI_Control_Misc3, 1 << index); } /* set scale factor */ setvideoreg(Index_VI_Hor_Post_Up_Scale_Low, (uint8_t) (pOverlay->HUSF)); setvideoreg(Index_VI_Hor_Post_Up_Scale_High, (uint8_t) ((pOverlay->HUSF) >> 8)); setvideoreg(Index_VI_Ver_Up_Scale_Low, (uint8_t) (pOverlay->VUSF)); setvideoreg(Index_VI_Ver_Up_Scale_High, (uint8_t) ((pOverlay->VUSF) >> 8)); setvideoregmask(Index_VI_Scale_Control, (pOverlay->IntBit << 3) | (pOverlay->wHPre), 0x7f); /* set destination window position */ setvideoreg(Index_VI_Win_Hor_Disp_Start_Low, (uint8_t) left); setvideoreg(Index_VI_Win_Hor_Disp_End_Low, (uint8_t) right); setvideoreg(Index_VI_Win_Hor_Over, (uint8_t) h_over); setvideoreg(Index_VI_Win_Ver_Disp_Start_Low, (uint8_t) top); setvideoreg(Index_VI_Win_Ver_Disp_End_Low, (uint8_t) bottom); setvideoreg(Index_VI_Win_Ver_Over, (uint8_t) v_over); setvideoregmask(Index_VI_Control_Misc1, pOverlay->bobEnable, 0x1a); /* Lock the address registers */ setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x20); } /* TW: Overlay MUST NOT be switched off while beam is over it */ static void close_overlay(void) { uint32_t watchdog; if ((sis_displaymode == DISPMODE_SINGLE2) || (sis_displaymode == DISPMODE_MIRROR)) { if (sis_has_two_overlays) { setvideoregmask(Index_VI_Control_Misc2, 0x01, 0x01); watchdog = WATCHDOG_DELAY; while (vblank_active_CRT2() && --watchdog); watchdog = WATCHDOG_DELAY; while ((!vblank_active_CRT2()) && --watchdog); setvideoregmask(Index_VI_Control_Misc0, 0x00, 0x02); watchdog = WATCHDOG_DELAY; while (vblank_active_CRT2() && --watchdog); watchdog = WATCHDOG_DELAY; while ((!vblank_active_CRT2()) && --watchdog); } else if (sis_displaymode == DISPMODE_SINGLE2) { setvideoregmask(Index_VI_Control_Misc2, 0x00, 0x01); watchdog = WATCHDOG_DELAY; while (vblank_active_CRT1() && --watchdog); watchdog = WATCHDOG_DELAY; while ((!vblank_active_CRT1()) && --watchdog); setvideoregmask(Index_VI_Control_Misc0, 0x00, 0x02); watchdog = WATCHDOG_DELAY; while (vblank_active_CRT1() && --watchdog); watchdog = WATCHDOG_DELAY; while ((!vblank_active_CRT1()) && --watchdog); } } if ((sis_displaymode == DISPMODE_SINGLE1) || (sis_displaymode == DISPMODE_MIRROR)) { setvideoregmask(Index_VI_Control_Misc2, 0x00, 0x01); watchdog = WATCHDOG_DELAY; while (vblank_active_CRT1() && --watchdog); watchdog = WATCHDOG_DELAY; while ((!vblank_active_CRT1()) && --watchdog); setvideoregmask(Index_VI_Control_Misc0, 0x00, 0x02); watchdog = WATCHDOG_DELAY; while (vblank_active_CRT1() && --watchdog); watchdog = WATCHDOG_DELAY; while ((!vblank_active_CRT1()) && --watchdog); } } static void calc_scale_factor(SISOverlayPtr pOverlay, int index, int iscrt2) { uint32_t i = 0, mult = 0; int flag = 0; int dstW = pOverlay->dstBox.x2 - pOverlay->dstBox.x1; int dstH = pOverlay->dstBox.y2 - pOverlay->dstBox.y1; int srcW = pOverlay->srcW; int srcH = pOverlay->srcH; /* uint16_t LCDheight = pSiS->LCDheight; */ int srcPitch = pOverlay->origPitch; int origdstH = dstH; /* get rid of warnings for now */ index = index; iscrt2 = iscrt2; /* TW: For double scan modes, we need to double the height * (Perhaps we also need to scale LVDS, but I'm not sure.) * On 310/325 series, we need to double the width as well. * Interlace mode vice versa. */ if (sis_vmode & VMODE_DOUBLESCAN) { dstH = origdstH << 1; flag = 0; if (sis_vga_engine == SIS_315_VGA) { dstW <<= 1; } } if (sis_vmode & VMODE_INTERLACED) { dstH = origdstH >> 1; flag = 0; } if (dstW < OVERLAY_MIN_WIDTH) dstW = OVERLAY_MIN_WIDTH; if (dstW == srcW) { pOverlay->HUSF = 0x00; pOverlay->IntBit = 0x05; pOverlay->wHPre = 0; } else if (dstW > srcW) { dstW += 2; pOverlay->HUSF = (srcW << 16) / dstW; pOverlay->IntBit = 0x04; pOverlay->wHPre = 0; } else { int tmpW = dstW; /* TW: It seems, the hardware can't scale below factor .125 (=1/8) if the pitch isn't a multiple of 256. TODO: Test this on the 310/325 series! */ if ((srcPitch % 256) || (srcPitch < 256)) { if (((dstW * 1000) / srcW) < 125) dstW = tmpW = ((srcW * 125) / 1000) + 1; } i = 0; pOverlay->IntBit = 0x01; while (srcW >= tmpW) { tmpW <<= 1; i++; } pOverlay->wHPre = (uint8_t) (i - 1); dstW <<= (i - 1); if ((srcW % dstW)) pOverlay->HUSF = ((srcW - dstW) << 16) / dstW; else pOverlay->HUSF = 0x00; } if (dstH < OVERLAY_MIN_HEIGHT) dstH = OVERLAY_MIN_HEIGHT; if (dstH == srcH) { pOverlay->VUSF = 0x00; pOverlay->IntBit |= 0x0A; } else if (dstH > srcH) { dstH += 0x02; pOverlay->VUSF = (srcH << 16) / dstH; pOverlay->IntBit |= 0x08; } else { uint32_t realI; i = realI = srcH / dstH; pOverlay->IntBit |= 0x02; if (i < 2) { pOverlay->VUSF = ((srcH - dstH) << 16) / dstH; /* TW: Needed for LCD-scaling modes */ if ((flag) && (mult = (srcH / origdstH)) >= 2) pOverlay->pitch /= mult; } else { if (((srcPitch * i) >> 2) > 0xFFF) { i = (0xFFF * 2 / srcPitch); pOverlay->VUSF = 0xFFFF; } else { dstH = i * dstH; if (srcH % dstH) pOverlay->VUSF = ((srcH - dstH) << 16) / dstH; else pOverlay->VUSF = 0x00; } /* set video frame buffer offset */ pOverlay->pitch = (uint16_t) (srcPitch * i); } } } static void set_line_buf_size(SISOverlayPtr pOverlay) { uint8_t preHIDF; uint32_t i; uint32_t line = pOverlay->srcW; if ((pOverlay->pixelFormat == IMGFMT_YV12) || (pOverlay->pixelFormat == IMGFMT_I420)) { preHIDF = pOverlay->wHPre & 0x07; switch (preHIDF) { case 3: if ((line & 0xffffff00) == line) i = (line >> 8); else i = (line >> 8) + 1; pOverlay->lineBufSize = (uint8_t) (i * 32 - 1); break; case 4: if ((line & 0xfffffe00) == line) i = (line >> 9); else i = (line >> 9) + 1; pOverlay->lineBufSize = (uint8_t) (i * 64 - 1); break; case 5: if ((line & 0xfffffc00) == line) i = (line >> 10); else i = (line >> 10) + 1; pOverlay->lineBufSize = (uint8_t) (i * 128 - 1); break; case 6: if ((line & 0xfffff800) == line) i = (line >> 11); else i = (line >> 11) + 1; pOverlay->lineBufSize = (uint8_t) (i * 256 - 1); break; default: if ((line & 0xffffff80) == line) i = (line >> 7); else i = (line >> 7) + 1; pOverlay->lineBufSize = (uint8_t) (i * 16 - 1); break; } } else { /* YUV2, UYVY */ if ((line & 0xffffff8) == line) i = (line >> 3); else i = (line >> 3) + 1; pOverlay->lineBufSize = (uint8_t) (i - 1); } } static void merge_line_buf(int enable) { if (enable) { switch (sis_displaymode) { case DISPMODE_SINGLE1: if (sis_has_two_overlays) { /* dual line merge */ setvideoregmask(Index_VI_Control_Misc2, 0x10, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x04); } else { setvideoregmask(Index_VI_Control_Misc2, 0x10, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x04); } break; case DISPMODE_SINGLE2: if (sis_has_two_overlays) { /* line merge */ setvideoregmask(Index_VI_Control_Misc2, 0x01, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x04, 0x04); } else { setvideoregmask(Index_VI_Control_Misc2, 0x10, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x04); } break; case DISPMODE_MIRROR: default: /* line merge */ setvideoregmask(Index_VI_Control_Misc2, 0x00, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x04, 0x04); if (sis_has_two_overlays) { /* line merge */ setvideoregmask(Index_VI_Control_Misc2, 0x01, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x04, 0x04); } break; } } else { switch (sis_displaymode) { case DISPMODE_SINGLE1: setvideoregmask(Index_VI_Control_Misc2, 0x00, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x04); break; case DISPMODE_SINGLE2: if (sis_has_two_overlays) { setvideoregmask(Index_VI_Control_Misc2, 0x01, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x04); } else { setvideoregmask(Index_VI_Control_Misc2, 0x00, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x04); } break; case DISPMODE_MIRROR: default: setvideoregmask(Index_VI_Control_Misc2, 0x00, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x04); if (sis_has_two_overlays) { setvideoregmask(Index_VI_Control_Misc2, 0x01, 0x11); setvideoregmask(Index_VI_Control_Misc1, 0x00, 0x04); } break; } } } static void set_format(SISOverlayPtr pOverlay) { uint8_t fmt; switch (pOverlay->pixelFormat) { case IMGFMT_YV12: case IMGFMT_I420: fmt = 0x0c; break; case IMGFMT_YUY2: fmt = 0x28; break; case IMGFMT_UYVY: fmt = 0x08; break; case IMGFMT_RGB15: /* D[5:4] : 00 RGB555, 01 RGB 565 */ fmt = 0x00; break; case IMGFMT_RGB16: fmt = 0x10; break; default: fmt = 0x00; break; } setvideoregmask(Index_VI_Control_Misc0, fmt, 0x7c); } static void set_colorkey(void) { uint8_t r, g, b; b = (uint8_t) sis_grkey.ckey.blue; g = (uint8_t) sis_grkey.ckey.green; r = (uint8_t) sis_grkey.ckey.red; /* set color key mode */ setvideoregmask(Index_VI_Key_Overlay_OP, sis_grkey.ckey.op == CKEY_TRUE ? VI_ROP_DestKey : VI_ROP_Always, 0x0F); /* set colorkey values */ setvideoreg(Index_VI_Overlay_ColorKey_Blue_Min, (uint8_t) b); setvideoreg(Index_VI_Overlay_ColorKey_Green_Min, (uint8_t) g); setvideoreg(Index_VI_Overlay_ColorKey_Red_Min, (uint8_t) r); setvideoreg(Index_VI_Overlay_ColorKey_Blue_Max, (uint8_t) b); setvideoreg(Index_VI_Overlay_ColorKey_Green_Max, (uint8_t) g); setvideoreg(Index_VI_Overlay_ColorKey_Red_Max, (uint8_t) r); } static void set_brightness(uint8_t brightness) { setvideoreg(Index_VI_Brightness, brightness); } static void set_contrast(uint8_t contrast) { setvideoregmask(Index_VI_Contrast_Enh_Ctrl, contrast, 0x07); } /* Next 3 functions are 310/325 series only */ static void set_saturation(char saturation) { uint8_t temp = 0; if (saturation < 0) { temp |= 0x88; saturation = -saturation; } temp |= (saturation & 0x07); temp |= ((saturation & 0x07) << 4); setvideoreg(Index_VI_Saturation, temp); } static void set_hue(uint8_t hue) { setvideoreg(Index_VI_Hue, (hue & 0x08) ? (hue ^ 0x07) : hue); } VDXDriver sis_drv = { "sis", NULL, .probe = sis_probe, .get_caps = sis_get_caps, .query_fourcc = sis_query_fourcc, .init = sis_init, .destroy = sis_destroy, .config_playback = sis_config_playback, .playback_on = sis_playback_on, .playback_off = sis_playback_off, .frame_sel = sis_frame_select, .get_eq = sis_get_eq, .set_eq = sis_set_eq, .get_gkey = sis_get_gkeys, .set_gkey = sis_set_gkeys, };