Mercurial > mplayer.hg
view libaf/af_volume.c @ 11007:48b7d7aa444d
configure altivec patch by Magnus Damm <damm@opensource.se>
* CC is not checked for Altivec support (see above).
The patch adds checks for FSF-style flags and Darwin-style flags.
The check is performed regardless of the gcc version.
* Disabling of Altivec.
--disable-altivec is broken today if /proc/cpuinfo shows that your cpu
supports altivec. The patch takes care of that.
* "GCC & CPU optimization abilities" always show that it is optimizing
for the cpu configure is running on, it should show the optimization that
is enabled for gcc instead. Cosmetic change only, but confusing as it is
today IMHO.
* Runtime CPU-detection now enables altivec for powerpc.
Now with the patch it should be possible to use --enable-altivec,
--disable-altivec, --enable-runtime-cpudetection regardless of powerpc cpu type.
The configure script handles altivec support in the following order:
1. Altivec is enabled by default if your cpu supports it.
2. --enable-runtime-cpudetection will enable altivec support.
3. If you have forced altivec on/off with --enable-altivec/--disable-altivec, then
your selection will override the previous altivec configuration.
4. If altivec is enabled but the compiler doesn't support it, altivec gets turned off.
author | attila |
---|---|
date | Sat, 04 Oct 2003 23:06:04 +0000 |
parents | 1d75a7ecf3b8 |
children | 61f3fce1e933 |
line wrap: on
line source
/*============================================================================= // // This software has been released under the terms of the GNU Public // license. See http://www.gnu.org/copyleft/gpl.html for details. // // Copyright 2002 Anders Johansson ajh@atri.curtin.edu.au // //============================================================================= */ /* This audio filter changes the volume of the sound, and can be used when the mixer doesn't support the PCM channel. It can handle between 1 and 6 channels. The volume can be adjusted between -60dB to +20dB and is set on a per channels basis. The is accessed through AF_CONTROL_VOLUME_LEVEL. The filter has support for soft-clipping, it is enabled by AF_CONTROL_VOLUME_SOFTCLIPP. It has also a probing feature which can be used to measure the power in the audio stream, both an instantaneous value and the maximum value can be probed. The probing is enable by AF_CONTROL_VOLUME_PROBE_ON_OFF and is done on a per channel basis. The result from the probing is obtained using AF_CONTROL_VOLUME_PROBE_GET and AF_CONTROL_VOLUME_PROBE_GET_MAX. The probed values are calculated in dB. */ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <inttypes.h> #include <math.h> #include <limits.h> #include "af.h" // Data for specific instances of this filter typedef struct af_volume_s { int enable[AF_NCH]; // Enable/disable / channel float pow[AF_NCH]; // Estimated power level [dB] float max[AF_NCH]; // Max Power level [dB] float level[AF_NCH]; // Gain level for each channel float time; // Forgetting factor for power estimate int soft; // Enable/disable soft clipping int fast; // Use fix-point volume control }af_volume_t; // Initialization and runtime control static int control(struct af_instance_s* af, int cmd, void* arg) { af_volume_t* s = (af_volume_t*)af->setup; switch(cmd){ case AF_CONTROL_REINIT: // Sanity check if(!arg) return AF_ERROR; af->data->rate = ((af_data_t*)arg)->rate; af->data->nch = ((af_data_t*)arg)->nch; if(s->fast && (((af_data_t*)arg)->format != (AF_FORMAT_F | AF_FORMAT_NE))){ af->data->format = AF_FORMAT_SI | AF_FORMAT_NE; af->data->bps = 2; } else{ // Cutoff set to 10Hz for forgetting factor float x = 2.0*M_PI*15.0/(float)af->data->rate; float t = 2.0-cos(x); s->time = 1.0 - (t - sqrt(t*t - 1)); af_msg(AF_MSG_DEBUG0,"[volume] Forgetting factor = %0.5f\n",s->time); af->data->format = AF_FORMAT_F | AF_FORMAT_NE; af->data->bps = 4; } return af_test_output(af,(af_data_t*)arg); case AF_CONTROL_COMMAND_LINE:{ float v=-10.0; float vol[AF_NCH]; int i; sscanf((char*)arg,"%f:%i", &v, &s->soft); for(i=0;i<AF_NCH;i++) vol[i]=v; return control(af,AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_SET, vol); } case AF_CONTROL_POST_CREATE: s->fast = ((((af_cfg_t*)arg)->force & AF_INIT_FORMAT_MASK) == AF_INIT_FLOAT) ? 0 : 1; return AF_OK; case AF_CONTROL_VOLUME_ON_OFF | AF_CONTROL_SET: memcpy(s->enable,(int*)arg,AF_NCH*sizeof(int)); return AF_OK; case AF_CONTROL_VOLUME_ON_OFF | AF_CONTROL_GET: memcpy((int*)arg,s->enable,AF_NCH*sizeof(int)); return AF_OK; case AF_CONTROL_VOLUME_SOFTCLIP | AF_CONTROL_SET: s->soft = *(int*)arg; return AF_OK; case AF_CONTROL_VOLUME_SOFTCLIP | AF_CONTROL_GET: *(int*)arg = s->soft; return AF_OK; case AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_SET: return af_from_dB(AF_NCH,(float*)arg,s->level,20.0,-200.0,60.0); case AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_GET: return af_to_dB(AF_NCH,s->level,(float*)arg,20.0); case AF_CONTROL_VOLUME_PROBE | AF_CONTROL_GET: return af_to_dB(AF_NCH,s->pow,(float*)arg,10.0); case AF_CONTROL_VOLUME_PROBE_MAX | AF_CONTROL_GET: return af_to_dB(AF_NCH,s->max,(float*)arg,10.0); case AF_CONTROL_PRE_DESTROY:{ float m = 0.0; int i; if(!s->fast){ for(i=0;i<AF_NCH;i++) m=max(m,s->max[i]); af_msg(AF_MSG_INFO,"[volume] The maximum volume was %0.2fdB \n", 10*log10(m)); } return AF_OK; } } return AF_UNKNOWN; } // Deallocate memory static void uninit(struct af_instance_s* af) { if(af->data) free(af->data); if(af->setup) free(af->setup); } // Filter data through filter static af_data_t* play(struct af_instance_s* af, af_data_t* data) { af_data_t* c = data; // Current working data af_volume_t* s = (af_volume_t*)af->setup; // Setup for this instance int ch = 0; // Channel counter register int nch = c->nch; // Number of channels register int i = 0; // Basic operation volume control only (used on slow machines) if(af->data->format == (AF_FORMAT_SI | AF_FORMAT_NE)){ int16_t* a = (int16_t*)c->audio; // Audio data int len = c->len/2; // Number of samples for(ch = 0; ch < nch ; ch++){ if(s->enable[ch]){ register int vol = (int)(255.0 * s->level[ch]); for(i=ch;i<len;i+=nch){ register int x = (a[i] * vol) >> 8; a[i]=clamp(x,SHRT_MIN,SHRT_MAX); } } } } // Machine is fast and data is floating point else if(af->data->format == (AF_FORMAT_F | AF_FORMAT_NE)){ float* a = (float*)c->audio; // Audio data int len = c->len/4; // Number of samples for(ch = 0; ch < nch ; ch++){ // Volume control (fader) if(s->enable[ch]){ float t = 1.0 - s->time; for(i=ch;i<len;i+=nch){ register float x = a[i]; register float pow = x*x; // Check maximum power value if(pow > s->max[ch]) s->max[ch] = pow; // Set volume x *= s->level[ch]; // Peak meter pow = x*x; if(pow > s->pow[ch]) s->pow[ch] = pow; else s->pow[ch] = t*s->pow[ch] + pow*s->time; // LP filter /* Soft clipping, the sound of a dream, thanks to Jon Wattes post to Musicdsp.org */ if(s->soft){ if (x >= M_PI/2) x = 1.0; else if(x <= -M_PI/2) x = -1.0; else x = sin(x); } // Hard clipping else x=clamp(x,-1.0,1.0); a[i] = x; } } } } return c; } // Allocate memory and set function pointers static int open(af_instance_t* af){ int i = 0; af->control=control; af->uninit=uninit; af->play=play; af->mul.n=1; af->mul.d=1; af->data=calloc(1,sizeof(af_data_t)); af->setup=calloc(1,sizeof(af_volume_t)); if(af->data == NULL || af->setup == NULL) return AF_ERROR; // Enable volume control and set initial volume to 0dB. for(i=0;i<AF_NCH;i++){ ((af_volume_t*)af->setup)->enable[i] = 1; ((af_volume_t*)af->setup)->level[i] = 1.0; } return AF_OK; } // Description of this filter af_info_t af_info_volume = { "Volume control audio filter", "volume", "Anders", "", AF_FLAGS_NOT_REENTRANT, open };