view vidix/sysdep/pci_arm32.c @ 29269:4d9de809b174

Add a hack to detect when we are writing into a Windows pipe since the fseek incorrectly does not fail like it should. This ensures we will not incorrectly append the file header at the end. Based on patch by Zhou Zongyi [zhouzongyi at pset.suntec.net]

/*
   This file is based on:
   $XFree86: xc/programs/Xserver/hw/xfree86/etc/scanpci.c,v 3.34.2.17 1998/11/10 11:55:40 dawes Exp $
   Modified for readability by Nick Kurshev
*/

static int pci_config_type( void )
{
  unsigned long tmplong1, tmplong2;
  unsigned char tmp1, tmp2;
  int retval;
    retval = 0;

    outb(PCI_MODE2_ENABLE_REG, 0x00);
    outb(PCI_MODE2_FORWARD_REG, 0x00);
    tmp1 = inb(PCI_MODE2_ENABLE_REG);
    tmp2 = inb(PCI_MODE2_FORWARD_REG);
    if ((tmp1 == 0x00) && (tmp2 == 0x00)) {
	retval = 2;
        /*printf("PCI says configuration type 2\n");*/
    } else {
        tmplong1 = inl(PCI_MODE1_ADDRESS_REG);
        outl(PCI_MODE1_ADDRESS_REG, PCI_EN);
        tmplong2 = inl(PCI_MODE1_ADDRESS_REG);
        outl(PCI_MODE1_ADDRESS_REG, tmplong1);
        if (tmplong2 == PCI_EN) {
	    retval = 1;
            /*printf("PCI says configuration type 1\n");*/
	} else {
            /*printf("No PCI !\n");*/
	    disable_os_io();
	    /*exit(1);*/
	    retval = 0xFFFF;
	}
    }
  return retval;
}

static int pci_get_vendor(
          unsigned char bus,
          unsigned char dev,
          int func)
{
    unsigned long config_cmd;
    config_cmd = PCI_EN | (bus<<16) | (dev<<11) | (func<<8);
    outl(PCI_MODE1_ADDRESS_REG, config_cmd);
    return inl(PCI_MODE1_DATA_REG);
}

static long pci_config_read_long(
          unsigned char bus,
          unsigned char dev,
          int func,
          unsigned cmd)
{
    unsigned long config_cmd;
    config_cmd = PCI_EN | (bus<<16) | (dev<<11) | (func<<8);
    outl(PCI_MODE1_ADDRESS_REG, config_cmd | cmd);
    return inl(PCI_MODE1_DATA_REG);
}