view libmpcodecs/ad_mpg123.c @ 34234:4ec96d5d2e4c

build: drop releaseclean target The target is supposed to remove files that are created during the XML build process without removing the generated documentation. Unfortunately, it does not work as expected and is not worth the extra complication.

/*
 * MPEG 1.0/2.0/2.5 audio layer I, II, III decoding with libmpg123
 *
 * Copyright (C) 2010 Thomas Orgis <[e-mail]>
 *
 * MPlayer is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#include "config.h"
#include "mp_msg.h"
#include "ad_internal.h"
#include "dec_audio.h"

static const ad_info_t info = {
    "MPEG 1.0/2.0/2.5 layers I, II, III",
    "mpg123",
    "Thomas Orgis",
    "mpg123.org",
    "High-performance decoder using libmpg123."
};

LIBAD_EXTERN(mpg123)

#include "libvo/fastmemcpy.h"

/* We avoid any usage of mpg123 API that is sensitive to the large file
 * support setting. This ensures compatibility with a wide range of libmpg123
 * installs. This code is intended to work with version 1.0.0 of libmpg123.
 *
 * Though the chosen API subset is not affected by the choice of large file
 * support, the mpg123 header (old versions of which) might include a check
 * for matching _FILE_OFFSET_BITS. Since MPlayer does always define this one
 * for large file support, we are safe for any default mpg123 install that
 * either doesn't have such checks or defaults to the large value of
 * _FILE_OFFSET_BITS .
 * So, in short: There's no worry unless you have a non-default libmpg123
 * with intentionally disabled large file support. */
/* You might need to #undef _FILE_OFFSET_BITS here on a 64 bit system
   with released mpg123 1.12 when using callback API. SVN snapshots
   should work fine. */
#include <mpg123.h>

/* Selection of mpg123 usage patterns:
 * AD_MPG123_CALLBACK: Use callback API instead of feeding of memory buffers.
 *   That needs mpg123>=1.12, on x86-64 SVN snapshot because of
 *   _FILE_OFFSET_BITS being defined (see above).
 * AD_MPG123_PACKET: Use packet-based input (including pts handling).
 * AD_MPG123_SEEKBUFFER: Use internal mpg123 buffer to enhance stream parsing.
 *   Makes sense with callback API only.
 * Any of those might affect I/O performance, might be significant compared
 * to the excessively optimized decoding.
 */
/* #define AD_MPG123_CALLBACK */
#define AD_MPG123_PACKET
/* #define AD_MPG123_SEEKBUFFER */

/* Switch for updating bitrate info of VBR files. Not essential. */
#define AD_MPG123_MEAN_BITRATE

struct ad_mpg123_context {
    mpg123_handle *handle;
#ifdef AD_MPG123_MEAN_BITRATE
    /* Running mean for bit rate, stream length estimation. */
    float mean_rate;
    unsigned int mean_count;
    /* Time delay for updates. */
    short delay;
#endif
    /* If the stream is actually VBR. */
    char vbr;
#if (defined AD_MPG123_CALLBACK) && (defined AD_MPG123_PACKET)
    unsigned char *packet;
    int packleft;
#endif
};

static void context_reset(struct ad_mpg123_context *con)
{
#ifdef AD_MPG123_MEAN_BITRATE
    con->mean_rate  = 0.;
    con->mean_count = 0;
    con->delay      = 1;
#endif
#if (defined AD_MPG123_CALLBACK) && (defined AD_MPG123_PACKET)
    con->packet   = NULL;
    con->packleft = 0;
#endif
}


#ifdef AD_MPG123_CALLBACK
/* Mpg123 calls that for retrieving data.
 * This wrapper is at least needed for the call frame (ssize_t vs. int). */
static ssize_t read_callback(void *ash, void *buf, size_t count)
{
    sh_audio_t *sh = ash;
#ifdef AD_MPG123_PACKET
    struct ad_mpg123_context *con = sh->context;
    unsigned char *target = buf;
    int need = count;
    ssize_t got = 0;
    while (need > 0) {
        if (con->packleft > 0) {
            int get = need > con->packleft ? con->packleft : need;
            /* Any difference to normal memcpy? */
            fast_memcpy(target, con->packet, get);
            /* OK, that does look redundant. */
            con->packet   += get;
            con->packleft -= get;
            target += get;
            need   -= get;
            got    += get;
        } else {
            double pts;
            /* Feed more input data. */
            con->packleft = ds_get_packet_pts(sh->ds, &con->packet, &pts);
            if (con->packleft <= 0)
                break;          /* Apparently that's it. EOF. */

            /* Next bytes from that presentation time. */
            if (pts != MP_NOPTS_VALUE) {
                sh->pts       = pts;
                sh->pts_bytes = 0;
            }
        }
    }
    return got;
#else
    /* It returns int... with the meaning of byte count. */
    return (ssize_t) demux_read_data(sh->ds, buf, count);
#endif
}

/* Arbitrary input seeking is not supported with this MPlayer API(?).
   That also means that we won't read any ID3v1 tags. */
static off_t seek_callback(void *sh, off_t pos, int whence)
{
    return -1;
}
#endif

/* This initializes libmpg123 and prepares the handle, including funky
 * parameters. */
static int preinit(sh_audio_t *sh)
{
    int err, flag;
    struct ad_mpg123_context *con;
    /* Assumption: You always call preinit + init + uninit, on every file.
     * But you stop at preinit in case it fails.
     * If that is not true, one must ensure not to call mpg123_init / exit
     * twice in a row. */
    if (mpg123_init() != MPG123_OK)
        return 0;

    sh->context = malloc(sizeof(struct ad_mpg123_context));
    con = sh->context;
    context_reset(con);

    /* Auto-choice of optimized decoder (first argument NULL). */
    con->handle = mpg123_new(NULL, &err);
    if (!con->handle)
        goto bad_end;

#ifdef CONFIG_FAKE_MONO
    /* Guessing here: Default value triggers forced upmix of mono to stereo. */
    flag = fakemono == 0 ? MPG123_FORCE_STEREO :
           fakemono == 1 ? MPG123_MONO_LEFT    :
           fakemono == 2 ? MPG123_MONO_RIGHT   : 0;
    if (mpg123_param(con->handle, MPG123_ADD_FLAGS, flag, 0.0) != MPG123_OK)
        goto bad_end;
#endif
#ifdef AD_MPG123_CALLBACK
    /* The I/O is handled via callbacks to MPlayer stream functions,
     * actually only the reading, as general seeking does not seem to be available */
    if (mpg123_replace_reader_handle(con->handle, read_callback,
                                     seek_callback, NULL) != MPG123_OK) {
        mp_msg(MSGT_DECAUDIO, MSGL_ERR, "mpg123 error: %s\n",
               mpg123_strerror(con->handle));
        mpg123_exit();
        return 0;
    }
#endif

    /* Basic settings.
     * Don't spill messages, enable better resync with non-seekable streams.
     * Give both flags individually without error checking to keep going with
     * old libmpg123. Generally, it is not fatal if the flags are not
     * honored */
    mpg123_param(con->handle, MPG123_ADD_FLAGS, MPG123_QUIET, 0.0);
    /* Old headers don't know MPG123_SEEKBUFFER yet, so use the plain 0x100. */
#ifdef AD_MPG123_SEEKBUFFER
    mpg123_param(con->handle, MPG123_ADD_FLAGS, 0x100, 0.0);
#endif
    /* Do not bail out on malformed streams at all.
     * MPlayer does not handle a decoder throwing the towel on crappy input. */
    mpg123_param(con->handle, MPG123_RESYNC_LIMIT, -1, 0.0);

    /* Open decisions: Configure libmpg123 to force encoding (or stay open about
     * library builds that support only float or int32 output), (de)configure
     * gapless decoding (won't work with seeking in MPlayer, though).
     * Don't forget to eventually enable ReplayGain/RVA support, too.
     * Let's try to run with the default for now. */

    /* Example for RVA choice (available since libmpg123 1.0.0):
    mpg123_param(con->handle, MPG123_RVA, MPG123_RVA_MIX, 0.0) */

    return 1;

  bad_end:
    if (!con->handle)
        mp_msg(MSGT_DECAUDIO, MSGL_ERR, "mpg123 preinit error: %s\n",
               mpg123_plain_strerror(err));
    else
        mp_msg(MSGT_DECAUDIO, MSGL_ERR, "mpg123 preinit error: %s\n",
               mpg123_strerror(con->handle));

    if (con->handle)
        mpg123_delete(con->handle);
    mpg123_exit();
    free(sh->context);
    sh->context = NULL;
    return 0;
}

/* Compute bitrate from frame size. */
static int compute_bitrate(struct mpg123_frameinfo *i)
{
    static const int samples_per_frame[4][4] = {
        {-1, 384, 1152, 1152},  /* MPEG 1 */
        {-1, 384, 1152,  576},  /* MPEG 2 */
        {-1, 384, 1152,  576},  /* MPEG 2.5 */
        {-1,  -1,   -1,   -1},  /* Unknown */
    };
    return (int) ((i->framesize + 4) * 8 * i->rate * 0.001 /
                  samples_per_frame[i->version][i->layer] + 0.5);
}

/* Opted against the header printout from old mp3lib, too much
 * irrelevant info. This is modelled after the mpg123 app's
 * standard output line.
 * If more verbosity is demanded, one can add more detail and
 * also throw in ID3v2 info which libmpg123 collects anyway. */
static void print_header_compact(struct mpg123_frameinfo *i)
{
    static const char *smodes[5] = {
        "stereo", "joint-stereo", "dual-channel", "mono", "invalid"
    };
    static const char *layers[4] = {
        "Unknown", "I", "II", "III"
    };
    static const char *versions[4] = {
        "1.0", "2.0", "2.5", "x.x"
    };

    mp_msg(MSGT_DECAUDIO, MSGL_V, "MPEG %s layer %s, ",
           versions[i->version], layers[i->layer]);
    switch (i->vbr) {
    case MPG123_CBR:
        if (i->bitrate)
            mp_msg(MSGT_DECAUDIO, MSGL_V, "%d kbit/s", i->bitrate);
        else
            mp_msg(MSGT_DECAUDIO, MSGL_V, "%d kbit/s (free format)",
                   compute_bitrate(i));
        break;
    case MPG123_VBR:
        mp_msg(MSGT_DECAUDIO, MSGL_V, "VBR");
        break;
    case MPG123_ABR:
        mp_msg(MSGT_DECAUDIO, MSGL_V, "%d kbit/s ABR", i->abr_rate);
        break;
    default:
        mp_msg(MSGT_DECAUDIO, MSGL_V, "???");
    }
    mp_msg(MSGT_DECAUDIO, MSGL_V, ", %ld Hz %s\n", i->rate,
           smodes[i->mode]);
}

#ifndef AD_MPG123_CALLBACK
/* This tries to extract a requested amount of decoded data.
 * Even when you request 0 bytes, it will feed enough input so that
 * the decoder _could_ have delivered something.
 * Returns byte count >= 0, -1 on error.
 *
 * Thoughts on exact pts keeping:
 * We have to assume that MPEG frames are cut in pieces by packet boundaries.
 * Also, it might be possible that the first packet does not contain enough
 * data to ensure initial stream sync... or re-sync on erroneous streams.
 * So we need something robust to relate the decoded byte count to the correct
 * time stamp. This is tricky, though. From the outside, you cannot tell if,
 * after having fed two packets until the first output arrives, one should
 * start counting from the first packet's pts or the second packet's.
 * So, let's just count from the last fed package's pts. If the packets are
 * exactly cut to MPEG frames, this will cause one frame mismatch in the
 * beginning (when mpg123 peeks ahead for the following header), but will
 * be corrected with the third frame already. One might add special code to
 * not increment the base pts past the first packet's after a resync before
 * the first decoded bytes arrived. */
static int decode_a_bit(sh_audio_t *sh, unsigned char *buf, int count)
{
    int ret = MPG123_OK;
    int got = 0;
    struct ad_mpg123_context *con = sh->context;

    /* There will be one MPG123_NEW_FORMAT message on first open.
     * This will be implicitly handled in reopen_stream(). */
    do {
        size_t got_now = 0;
        ret = mpg123_decode(con->handle, NULL, 0, buf + got, count - got,
                            &got_now);
        got += got_now;
#ifdef AD_MPG123_PACKET
        sh->pts_bytes += got_now;
#endif

        if (ret == MPG123_NEED_MORE) {
            int incount;
#ifdef AD_MPG123_PACKET
            double pts;
            unsigned char *inbuf;
            /* Feed more input data. */
            incount = ds_get_packet_pts(sh->ds, &inbuf, &pts);
            if (incount <= 0)
                break;          /* Apparently that's it. EOF. */

            /* Next bytes from that presentation time. */
            if (pts != MP_NOPTS_VALUE) {
                sh->pts       = pts;
                sh->pts_bytes = 0;
            }
#else
            const int inbufsize = 4096;
            unsigned char inbuf[inbufsize];
            /* Feed more input data. */
            incount = demux_read_data(((sh_audio_t *) sh)->ds,
                                      inbuf, inbufsize);
            if (incount == 0)
                break;          /* Apparently that's it. EOF. */
#endif

            /* Do not use mpg123_feed(), added in later libmpg123 versions. */
            ret = mpg123_decode(con->handle, inbuf, incount, NULL, 0, NULL);
            /* Return value is checked in the loop condition.
             * It could be MPG12_OK now, it could need more. */
        }
        /* Older mpg123 versions might indicate MPG123_DONE, so be prepared. */
        else if (ret == MPG123_ERR || ret == MPG123_DONE)
            break;

    } while (ret == MPG123_NEED_MORE || got < count);

    if (ret == MPG123_ERR) {
        mp_msg(MSGT_DECAUDIO, MSGL_ERR, "mpg123 decoding failed: %s\n",
               mpg123_strerror(con->handle));
        mpg123_close(con->handle);
        return -1;
    }

    return got;
}
#endif

/* Close, reopen stream. Feed data until we know the format of the stream.
 * 1 on success, 0 on error */
static int reopen_stream(sh_audio_t *sh)
{
    long rate;
    int chan, enc;
    struct ad_mpg123_context *con = (struct ad_mpg123_context*) sh->context;

    mpg123_close(con->handle);
    context_reset(con);

#ifdef AD_MPG123_CALLBACK
    if (MPG123_OK == mpg123_open_handle(con->handle, sh) &&
#else
    if (/* Open and make sure we have fed enough data to get stream properties. */
        MPG123_OK == mpg123_open_feed(con->handle) &&
        /* Feed data until mpg123 is ready (has found stream beginning). */
        !decode_a_bit(sh, NULL, 0) &&
#endif
        /* Not handing NULL pointers for compatibility with old libmpg123. */
        MPG123_OK == mpg123_getformat(con->handle, &rate, &chan, &enc)) {
        return 1;
    } else {
        mp_msg(MSGT_DECAUDIO, MSGL_ERR,
               "mpg123 failed to reopen stream: %s\n",
               mpg123_strerror(con->handle));
        mpg123_close(con->handle);
        return 0;
    }
}

/* Now we really start accessing some data and determining file format.
 * Paranoia note: The mpg123_close() on errors is not really necessary,
 * But it ensures that we don't accidentally continue decoding with a
 * bad state (possibly interpreting the format badly or whatnot). */
static int init(sh_audio_t *sh)
{
    long rate    = 0;
    int channels = 0;
    int encoding = 0;
    mpg123_id3v2 *v2;
    struct mpg123_frameinfo finfo;
    struct ad_mpg123_context *con = sh->context;

    /* We're open about any output format that libmpg123 will suggest.
     * Note that a standard build will always default to 16 bit signed and
     * the native sample rate of the file. */
    if (MPG123_OK == mpg123_format_all(con->handle) &&
        reopen_stream(sh) &&
        MPG123_OK == mpg123_getformat(con->handle, &rate, &channels, &encoding) &&
        /* Forbid the format to change later on. */
        MPG123_OK == mpg123_format_none(con->handle) &&
        MPG123_OK == mpg123_format(con->handle, rate, channels, encoding) &&
        /* Get MPEG header info. */
        MPG123_OK == mpg123_info(con->handle, &finfo) &&
        /* Since we queried format, mpg123 should have read past ID3v2 tags.
         * We need to decide if printing of UTF-8 encoded text info is wanted. */
        MPG123_OK == mpg123_id3(con->handle, NULL, &v2)) {
        /* If we are here, we passed all hurdles. Yay! Extract the info. */
        print_header_compact(&finfo);
        /* Do we want to print out the UTF-8 Id3v2 info?
        if (v2)
            print_id3v2(v2); */

        /* Have kb/s, want B/s
         * For VBR, the first frame will be a bad estimate. */
        sh->i_bps = (finfo.bitrate ? finfo.bitrate : compute_bitrate(&finfo))
                    * 1000 / 8;
        context_reset(con);
        con->vbr = (finfo.vbr != MPG123_CBR);
        sh->channels   = channels;
        sh->samplerate = rate;
        /* Without external force, mpg123 will always choose signed encoding,
         * and non-16-bit only on builds that don't support it.
         * Be reminded that it doesn't matter to the MPEG file what encoding
         * is produced from it. */
        switch (encoding) {
        case MPG123_ENC_SIGNED_8:
            sh->sample_format = AF_FORMAT_S8;
            sh->samplesize    = 1;
            break;
        case MPG123_ENC_SIGNED_16:
            sh->sample_format = AF_FORMAT_S16_NE;
            sh->samplesize    = 2;
            break;
        /* To stay compatible with the oldest libmpg123 headers, do not rely
         * on float and 32 bit encoding symbols being defined.
         * Those formats came later */
        case 0x1180: /* MPG123_ENC_SIGNED_32 */
            sh->sample_format = AF_FORMAT_S32_NE;
            sh->samplesize    = 4;
            break;
        case 0x200: /* MPG123_ENC_FLOAT_32 */
            sh->sample_format = AF_FORMAT_FLOAT_NE;
            sh->samplesize    = 4;
            break;
        default:
            mp_msg(MSGT_DECAUDIO, MSGL_ERR,
                   "Bad encoding from mpg123: %i.\n", encoding);
            mpg123_close(con->handle);
            return 0;
        }

        return 1;
    } else {
        mp_msg(MSGT_DECAUDIO, MSGL_ERR, "mpg123 init error: %s\n",
               mpg123_strerror(con->handle));
        mpg123_close(con->handle);
        return 0;
    }
}

static void uninit(sh_audio_t *sh)
{
    struct ad_mpg123_context *con = (struct ad_mpg123_context*) sh->context;

    mpg123_close(con->handle);
    mpg123_delete(con->handle);
    free(sh->context);
    sh->context = NULL;
    mpg123_exit();
}

#ifdef AD_MPG123_MEAN_BITRATE
/* Update mean bitrate. This could be dropped if accurate time display
 * on audio file playback is not desired. */
static void update_info(sh_audio_t *sh)
{
    struct ad_mpg123_context *con = sh->context;
    if (con->vbr && --con->delay < 1) {
        struct mpg123_frameinfo finfo;
        if (MPG123_OK == mpg123_info(con->handle, &finfo)) {
            if (++con->mean_count > ((unsigned int) -1) / 2)
                con->mean_count = ((unsigned int) -1) / 4;

            /* Might not be numerically optimal, but works fine enough. */
            con->mean_rate = ((con->mean_count - 1) * con->mean_rate +
                              finfo.bitrate) / con->mean_count;
            sh->i_bps = (int) (con->mean_rate * 1000 / 8);

            con->delay = 10;
        }
    }
}
#endif

static int decode_audio(sh_audio_t *sh, unsigned char *buf, int minlen,
                        int maxlen)
{
    int bytes;

#ifdef AD_MPG123_CALLBACK
    struct ad_mpg123_context *con = sh->context;
    size_t got_bytes = 0;
    if (MPG123_ERR == mpg123_read(con->handle, buf, minlen, &got_bytes)) {
        mp_msg(MSGT_DECAUDIO, MSGL_ERR, "Decoding error in mpg123: %s\n",
               mpg123_strerror(con->handle));
        return -1;
    }
#ifdef AD_MPG123_PACKET
    sh->pts_bytes += got_bytes;
#endif
    bytes = got_bytes;
#else
    bytes = decode_a_bit(sh, buf, minlen);
#endif

    if (bytes == 0)
        return -1;              /* EOF */

#ifdef AD_MPG123_MEAN_BITRATE
    update_info(sh);
#endif

    return bytes;
}

static int control(sh_audio_t *sh, int cmd, void *arg, ...)
{
    switch (cmd) {
    case ADCTRL_RESYNC_STREAM:
        /* Close/reopen the stream for mpg123 to make sure it doesn't
         * think that it still knows the exact stream position.
         * Otherwise, we would have funny effects from the gapless code.
         * Oh, and it helps to minimize artifacts from jumping in the stream. */
        if (reopen_stream(sh)) {
#ifdef AD_MPG123_MEAN_BITRATE
            update_info(sh);
#endif
            return CONTROL_TRUE;
        } else {
            mp_msg(MSGT_DECAUDIO, MSGL_ERR,
                   "mpg123 cannot reopen stream for resync.\n");
            return CONTROL_FALSE;
        }
        break;
    }
    return CONTROL_UNKNOWN;
}