Mercurial > mplayer.hg

.\" synced with 1.793 (TODO)
.\"
.\" Work in progress, help appreciated
.\"
.\" MPlayer (C) 2000-2004 MPlayer Team
.\" This man page was/is done by Gabucino, Diego Biurrun, Jonas Jermann
.\" Translator: Carl Fürstenberg < azatoth at gmail dot com >
.
.\" --------------------------------------------------------------------------
.\" Macro definitions
.\" --------------------------------------------------------------------------
.
.\" default indentation is 7, don't change!
.nr IN 7
.\" define indentation for suboptions
.nr SS 5
.\" add new suboption
.de IPs
.IP "\\$1" \n(SS
..
.\" begin of first level suboptions, end with .RE
.de RSs
.RS \n(IN+3
..
.\" begin of 2nd level suboptions
.de RSss
.PD 0
.RS \n(SS+3
..
.\" end of 2nd level suboptions
.de REss
.RE
.PD 1
..
.
.\" --------------------------------------------------------------------------
.\" Title
.\" --------------------------------------------------------------------------
.
.TH MPlayer 1 "2004-10-20" "The MPlayer Project" "The Movie Player"
.
.SH NAME
mplayer  \- filmspelare
.br
mencoder \- filmkodare
.
.\" --------------------------------------------------------------------------
.\" Synopsis
.\" --------------------------------------------------------------------------
.
.SH SYNOPSIS
.na
.nh
.B mplayer
.RI [argument]\ [ \ fil\  | \ URL\  | \ spellista\  | \ \-\  ]
.
.br
.in
.B mplayer
'in +\n[.k]u
[globala argument]
.I fil1
[specifika argument] [fil2] [specifika argument]
.
.br
.in
.B mplayer
'in +\n[.k]u
[globala argument]
.RI { "grupp av filer och argument" }
[gruppspecifika argument]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I dvd://[title|[start_title]\-slut_title ]
[argument]
.\" if patch accepted
.
.br
.in
.B mplayer
'in +\n[.k]u
.I dvd://[title][:kapitel[-slutkapitel][:vinkel][@dvd-enhet]
[argument]
.\" end if
.
.br
.in
.B mplayer
'in +\n[.k]u
.I vcd://spår[/enhet]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I tv://[kanal]
[argument]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I dvb://[kortnummer@]kanal
[argument]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I mf://filmask
[-mf argument] [argument]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I [cdda|cddb]://spår[:fart][/enhet]
[argument]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I cue://fil[:spår]
[options]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I [mms[t]|http|http_proxy|rt[s]p|ftp]://
.I [användare:lösenord@]URL[:port]
[argument]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I sdp://fil
[argument]
.
.br
.in
.B mplayer
'in +\n[.k]u
.I mpst://host[:port]/URL
[argument]
.
.br
.in
.B gmplayer
[argument]
[\-skin\ skin]
.
.br
.B mencoder
[argument]
.RI [ \ fil\  | \ URL\  | \ \-\  ]
[\-o\ fil]
.ad
.hy
.
.\" --------------------------------------------------------------------------
.\" Description
.\" --------------------------------------------------------------------------
.
.SH BESKRIVNING
.B mplayer
är en filmspelare, ursprungligen för Linux, men kan köras på de flesta
platformar (se dokumentationen). Den spelare mestadels MPEG/\:VOB, AVI,
ASF/\:WMA/\:WMV, RM, QT/\:MOV/\:MP4, OGG/\:OGM, MKV, VIVO, FLI, NuppelVideo,
yuv4mpeg, FILM samt RoQ filer, är stödd av många nativa och binära codec. Du
kan kolla VideoCD, SVCD, DVD, 3ivx, DivX\ 3/\:4/\:5 samt även WMV filmer.
.PP
MPlayer stödjer en uppsjö av video- och audio-ut-drivrutiner. Den funkar med
X11, Xv, DGA, OpenGL, SVGAlib, fbdev, AAlib, libcaca, DirectFB, Quartz, men du
kan även använda GGI, SDL (pch alla deras drivrutiner), VESA (på varenda
VESA-kompatibla kort, även utan X11), vissa låglevelade kortspecifika
kortsdrivrutiner (för Matrox, 3Dfx samt ATI) och vissa
hårdvaru-MPEG-avkodarkort, såsom Siemens DVB, DXR2 samt DXR3/\:Hollywood+. De
flesta stödjer mjukvaro och hårdvaruskalning, så du kan kolla på filmer i
fullskärmsmode
.PP
MPlayer har "onscreen display" (OSD) för statusinformation, snygga stora
antialiserade skuggade textningstexter samt visuellt återgivning av
tagentbordskontroller. Europeiska/\:ISO 8859-1,2 , kyrilliska, samt koreanska
typsnitt är stött
jämnsides med 12 textningsformat (MicroDVD, SubRip, OGM, SubViewer, Sami,
VPlayer, RT, SSA, AQTitle, JACOsub, PJS samt vår egna: MPsub) och DVD-textning
(SPU-ström, VOBsub och Closed Captions).
.PP
.B mencoder
(MPlayer's Movie Encoder) är en enkel filmkodare, framtagen till att koda
MPlayer-spelbara filmer (se ovan) till andra MPlayer-spelbara format (se
nedan).
Den kodar till DivX4, XviD, någon av libavcodecs codec, samt
PCM/\:MP3/\:VBRMP3-audio i 1, 2 eller 3 pass.
Även så har den strömkopieringsförmåga, ett kraftfullt filtersystem (crop,
expand, flip, postprocess, rotate, scale, noise, rgb/\:yuv conversion) och mera.
.PP
.B gmplayer
är MPlayer med ett grafiskt användargränssnitt (GUI). Det har samma alternativ
som MPlayer.
.PP
Användningsexempel för snabbstart är lokaliserade i slutet på denna manual.
.PP
.B Även hänvisa till HTML-dokumentationen!
.
.
.\" --------------------------------------------------------------------------
.\" Keyboard control
.\" --------------------------------------------------------------------------
.
.SH "TAGENTBORDSKONTROLL"
MPlayer har en fullt ut konfigurerbar, kommandoradsorienterat kontrollager
vilken tillåter dig att kontrollera MPlayer med hjälp av tagentbord, mus,
joystick samt fjärrkontroll (med LIRC). Hänvisa till '-input'-argumentet för
flera sätt att konfigurera det.
.
.TP
.B generella kontroller
.PD 0
.RSs
.IPs "<\- samt \->"
Sök bakåt/framåt 10 sekunder.
.IPs "upp samt ner"
Sök bakåt/framåt 1 minut.
.IPs "pgup samt pgdown"
Sök bakåt/framåt 10 minuter.
.IPs "[ samt ]"
Öka/minska uppspelningshastighet med 10%.
.IPs "{ samt }"
Halvera/dubbla uppspelningshastighet.
.IPs "Backspace"
Återställ uppspelningshastighet.
.IPs "< samt >"
backa/hoppa frmaåt i spellista.
.IPs "HOME samt END"
nästa/föregående spelträdsinölägg i förälderlistan.
.\" FIXME next/\:previous playtree entry in the parent list
.IPs "INS samt DEL"
nästa/föregående alternativa source (ASX-spellista endast). \" FIXME source
.IPs "p / MELLANSLAG"
Pausa filmen(valfri tagent fortsätter uppspelningen).
.IPs .\ \ \ \
Steppa framåt. Pressa en gång kommer att pausa filmen, varje efterföljande
knapptryckning kommer hoppa fram en bildruta and sedan gå in i pausläge igen
(valfri tagent fortsätter uppspelningen).
.IPs "q / ESC"
Stanna uppspelningen och avsluta programmet.
.IPs "+ samt -"
Ställ in audioförströjning med ± 0.1 sekund.
.IPs "/ samt *"
Öka/sänk volym.
.IPs "9 and 0"
Öka/sänk volym.
.IPs m\ \ \ \
Muta ljud.
.IPs f\ \ \ \
Aktivera fullskärmsläge (se även \-fs).
.IPs T\ \ \ \
Aktivera 'stay-on-top' (se även \-ontop). \" FIXME stay-on-top?
.IPs "w and e"
Öka/miska 'pan-and-scan'-rymd. \" FIXME pan-to-scan?
.IPs o\ \ \ \
Aktivera OSD-information: inget / sök / sök + timer / sök + timer + total tid.
.IPs d\ \ \ \
Aktivera framedropping-information: ingen / förbise display / förbise avkodning
(se \-framedrop samt \-hardframedrop).
.IPs v\ \ \ \
Aktivera textningsvisning.
.IPs "b / j"
Cykla igenom de tillgängliga textningar.
.IP F\ \ \ \
Aktivera visning "forced subtitles". \" FIXME what?
.IPs a\ \ \ \
Ställ in textningspositionering: uppe/mitt/nere.
.IPs "z samt x"
Ställ in textningsfördröjning med ± 0.1 sekund.
.IPs "r samt t"
Flytta textningstext upp/ner.
.IPs i\ \ \ \
Sätt EDL-märke.
.RE
.PD 1
.PP
(Följande tagenter är endast tillgängliga vid användande av hårdvaruacceleread
video-ut (xv, (x)vidix, (x)mga, etc...), eller mjukvaruequalizerfilter (\-vf eq
eller \-vf eq2).
.PP
.PD 0
.RSs
.IPs "1 samt 2"
Ställ in kontrast.
.IPs "3 samt 4"
Ställ in ljusstyrka.
.IPs "5 samt 6"
Ställ in hue. \" FIXME hue
.IPs "7 samt 8"
Ställ in saturation. \" FIXME saturation
.RE
.PD 1
.PP
(Följande tegenter är endast tillgängliga vid användande av
quartzvideo-ut-drivrutin.)
.PP
.PD 0
.RSs
.IPs "alternativ + 0"
Ändra storleken på filmfönstret till hälften av sin standardstorlek.
.IPs "alternativ + 1"
Ändra storleken på filmfönstret till dess standardstorlek.
.IPs "alternativ + 2"
Ändra storleken på filmfönstret till dubbel standardstorlek.
.IPs "alternativ + f"
Aktivera fullskärm (se även \-fs).
.IPs "alternativ + [ och alternativ + ]"
Sätt filmfönsteralfa. \" FIXME movie window alpha?
.IPs T\ \ \ \
Aktivera videlager: ontop/below/normal (se även \-ontop).
\" FIXME translate ontop etc...?
.RE
.PD 1
.
.TP
.B GUI-tagentbordskontroll
.PD 0
.RSs
.IPs ENTER
Starta uppspelning.
.IPs s\ \ \ \
Stoppa uppspelning.
.IPs l\ \ \ \
Ladda fil.
.IPs c\ \ \ \
Skinläsare.
.IPs p\ \ \ \
Aktivera spellista.
.RE
.PD 1
.
.TP
.B TV input control
.PD 0
.RSs
.IPs "h samt k"
Välj föregående/nästa kanal.
.IPs n\ \ \ \
Ändra norm.
.IPs u\ \ \ \
Ändra kanallista.
.RE
.PD 1
.
.
.\" --------------------------------------------------------------------------
.\" Options
.\" --------------------------------------------------------------------------
.
.SH "ANVÄNDNING"
Varje 'flag'-argument har en 'noflag'-motsvarighet, d.v.s.\& motsatsen till
\-fs är \-nofs
.PP
Om ett argument är markerad som (XXX endast), kommer det endast att fungera i
samarbete med XXX eller om XXX är inkompilerat.
.PP
Du kan lägga alla argument i en konfigurationsfil vilken kommer att bli inläst
varje gång MPlayer körs. Den systemvida konfigurationsfilen 'mplayer.conf' är i
din konfigurationskatalog (d.v.s.\& /etc/mplayer eller /usr/local/etc/mplayer),
den användarspecifika är lokaliserad i '~.mplayer/config'. Användarspecifika
inställningar skriver över systemvida inställningar, och argument angivna på
kommandoraden skriver över bägge. Syntaxen i konfigurationsfilen är
\'option=<value>\', allting efter ett '#' är antaget som en kommentar.
Inställningar som fungerar utan värden kan bli aktiverade genom att sätta dem
till 'yes', '1' eller 'true', och kan bli avaktiverade genom att sätta dem till
\'no\', '0' eller 'false'.
Även underargument kan bli specifierade på detta vis.
.PP
.I EXEMPEL:
.nf
# Använd Matrox-drivrutin per standard.
vo=xmga
# Jag älskar att stå på händerna när jag kollar på video
flip=yes
# Decode/\:encode multipla filer från png,
# starta med mf://filemask
mf=type=png:fps=25
# Eerie-negativa bilder är coola. \" Eerie?
vf=eq2=1.0:-0.8
.fi
.PP
Du kan även skriva filspecifika konfigurationsfiler.
Om du önskar att ha en konfigurationsfil för en fil kallad 'movie.avi', skapa
då en fil kallad 'movie.avi.conf' med de filspecifika inställningar i sig och
placera den i ~/.mplayer eller i samma katalog som filen.
.
.
.
.SH "GENERELLA INSTÄLLNINGAR"
.
.TP
.B \-codecs-file <filnamn> (se även \-afm, \-ac, \-vfm, \-vc)
Använd specifierad fil istället för systemvid ller inbyggd codecs.conf.
.
.TP
.B \-include <konfigurationsfil>
Specifiera konfigurationsfil till att bli tolkad efter de vanliga.
.
.TP
.B \-quiet\ \
Gör konsolutskrift mindre uttömmande; till exempel så ser den till att
statuslinje (d.v.s.\& A:   0.7 V:   0.6 A-V:  0.068 ...) från att visas.
Speciellt användbart på slöa terminaler och trasiga sådana som inte hanterar
fullt ut vagnretur (d.v.s.\& \\r).
.
.TP
.B \-v, \-verbose
Ökar ordrikedomsnivån (flera \-v betyder mer ordrikedom).
.PD 0
.RSs
.IPs 0
endast något informerande utskrift (standard)
.IPs 1
viss fundamental debuginformation, avihuvuden, funktionsvärden (init debug)
.IPs 2
skriver ut avi-indexes, 'chunk input', med debuginformation (player debug)
.IPs 3
skriver ut allting relaterat till inputtolkar (parser debug)
.RE
.PD 1
.
.
.
.SH "SPELARINSTÄLLNINGAR (ENDAST MPLAYER)"
.
.TP
.B \-autoq <kvalité> (används med \-vf [s]pp)
Dynamiskt ändra nivån av afterproccessering beroende på tillgängliga
CPU-cyklar. Värdet du specifierar kommer att bli den maximalt använda nivån,
vanligtvis så kan du specifiera stora värden. Du måste använda \-vf [s]pp
utan paramertar för att få detta att funka.
.
.TP
.B \-autosync <faktor>
Gradvist ställa in A/V-synkning baserat på audiofördröjningsmätning.
Om du anger \-autosync\ 0 (standard), kommer bildramsanpassningen att vara
baserad endast av audiofördröjningsmätning. Om du anger \-autosync\ 1 så
kommer liknande att inträffa, förutom att A/V-korrektionsalgoritmen kommer
att ändras något. Ett udda videoframerate i en film vilken spelar bra med
\-nosound kan ofta bli hjälpt med att sätta denna till ett värde större än 1.
Ju större värde, ju närmare anpassningen kommer att vara \-nosound. Testa
\-autosync\ 30 för att plana ut problem med ljuddrivrutiner vilka inte
implementerar en perfekt audiofördröjningsmätning. Med detta värde, om
stora A/V-synkningsfel inträffar, kommer det endast att ta 1 eller 2\
sekunder att plana ut. Denna fördröjning i reaktionstid till plötslig
A/V-fel torde vara den enda sidoeffekt med att ha denna inställd aktiverad,
för alla ljuddrivrutiner.
.
.TP
.B \-benchmark
Skriver ut viss statistik ang. CPU-användning samt tappade bildrutor vid slutet
att uppspelning. Använd i kombination med \-nosound samt \-vo null för
benchmarkning av endast videocodec.
.br
.I NOTERA:
Med denna inställning så kommer MPlayer att ignorera bildramsduration vid
spelande av endast video (du kan tänka detta som oändlig bps)
.
.TP
.B \-colorkey <nummer>
Ändrar färgnyckeln till av dig valt RGB-värde. RGB-värdet är i form av
0xrrggbb där varje färg är ett värde från 00 till ff (0 till 255) där
0x000000 är svart samt 0xffffff är vitt. Detta stödjs endast av cvidix-,
fbdev-, svga-, vesa-, winvidix-, xmga-, xvidix- samt xover-video-ut-\
drivrutinerna.
.
.TP
.B \-nocolorkey
Inaktiverar färgnyckling. Dtödjs endast av cvidix-, fbdev-, svga-, vesa-,
winvidix-, xmga-, xvidix- samt xover-video-ut-dtrivrutinerna.
.\" colorkeying?
.
.TP
.B \-edl <filnamn> (Endast EDL)
Aktivera händelser för val i redigeringslista (EDL) under uppspelning. Video
kommer att skippas och audio kommer att bli mutad/omutad i relation till
inlägg i given fil. Se  DOCS/\:HTML/\:en/\:edl.html för detaljer att använda
detta
\" FIXME sv when that translation is done
.
.TP
.B \-edlout <filnamn> (Endast EDL)
Skapar en ny fil och skriver redigeringsvalslistsinspelning till denna fil.
Under uppspelning, när användaren knappar på 'i', ett inlägg för att hoppa över
de två sista minuterna komma att skrivas in i filen. Detta möjliggör en
startpunkt från det attanvändaren kan finjustea EDL-inläggen senare.
Se DOCS/\:HTML/\:en/\:edl.html för detaljer. \" FIXME -''-
.
.TP
.B \-enqueue (Endast GUI)
Lägg till angivna filer till spellista istället för att spela upp dem på
direkten.
.
.TP
.B \-fixed-vo (BETAKOD!)
Forcerar ett fixerat videosystem för multipla filer ( en (de)initiering för
alla filer). Därav endast ett fönster kommer att bli öppnat för alla filer.
För stunden endast följande drivrutiner stödjer detta: gl2, mga, svga, x11,
xmga, xv, xvidix samt dfbmga.
.
.TP
.B \-framedrop (se även \-hardframedrop)
Skippa visning av vissa bildrutor för att fårtfå en A/V-synkronisering på
slöa system. Videofilter är inte applicerade på sådana bildrutor. För
B-bildrutor, även avkodning skippas helt.
.
.TP
.B \-h, \-help, \-\-help
Visa kort introduktion av argument.
.
.TP
.B \-hardframedrop
Mer intensiv framedropping (byter dekodning). Leder till bildförstörning.
.
.TP
.B \-identify
Visar filparametrar i ett enkelt tolkningsbart format. Wrapperscriptet
TOOLS/midentify tar bort övrig MPlayer-output och (förhoppningsvis)
shellescapear filnamnet.
.
.TP
.B \-input <kommandon>
Detta argument kan användas för att konfigurera specifika delar av
input-systemet. Kataloger är relativa till ~/.mplayer/.
.br
.I NOTERA:
Autorepeat stödls för tillfället endast av joystick.
.sp 1
Tillgängliga kommandon är:
.sp 1
.PD 0
.RSs
.IPs conf=<filnamn>
Specifiera input-konfigurationsfil istället för standard ~/.mplayer/input.conf.
~/.pmlayer/<filnamn> är antaget om inte full path är given.
.IPs ar-delay
Fördröj i millisekunder före vi startar med att autoupprpa en nyckel (0 för att
inaktivera)
.IPs ar-rate
Antalet nycklar nedtryckta per sekund för autouprepning.
.IPs keylist
Skriv ut alla nucklar som kan kopplas till kommandon.
.IPs cmdlist
Skriv ut atta kommandon som kan bli kopplade till nycklar.
.IPs js-dev
Specifera joysticksenheten (standard: /dev/input/js0).
.IPs file\
Läs kommandon från given fil. Mestadels användbar med en FIFO.
.br
.I NOTERA:
När given fil är en FIFO, Kommer MPlayer att öppna båda ändarna så du kan göra
flera 'echo "seek 10" > mp_pipe' och pipen kommer att fortsätta vara valid.
.RE
.PD 1
.
.TP
.B \-lircconf <filnamn> (Endast LIRC)
Specifiera en konfigurationsfil för LIRC (standard: ~/\:.lircrc).
.
.TP
.B \-list-options
Skriv ut alla tillgängliga alternativ.
.
.TP
.B \-loop <nummer>
Loopar filmuppspelningen <nummer> gånger. 0 betyder oändligt.
.
.TP
.B \-menu (Endast OSD-meny)
Aktiverar OSD-menystöd.
.
.TP
.B \-menu-cfg <filnamn> (Endast OSD-meny)
Använd en alternativ menu.conf.
.
.TP
.B \-menu-root <värde> (Endast OSD-meny)
Specifiera huvudmenyn.
.
.TP
.B \-menu-startup (Endast OSD-meny)
Deaktivera huvudmenyn vid start av MPlayer.
.
.TP
.B \-noconsolecontrols
Förhindrar MPlayer från att läsa nyckelhändelser från stdin. Användbart vid
läsning av data från stdin. Detta är automatiskt aktiverat när \- är angivet på
kommandoraden. Det är situationer där du måste aktivera det manuellt, t.ex.\& om
du öppnar /dev/\:stdin (eller ekvivalent på ditt system), använder stdin i en
spellista, eller kommer att läsa från stdin senare via laddningsfilen eller
slavanrop från laddningsfilen.
.
.TP
.B \-nojoystick
Deaktiverar joysticksstöd.
.
.TP
.B \-nolirc
Deaktiverar LIRC-stöd.
.
.TP
.B \-nomouseinput (Endast X11)
Deaktiverar input av musknappshändelser (mozplayerxp:s sammanhangsmeny stödjer
sig på detta alternativ).
.
.TP
.B \-nortc (Endast RTC)
Stänger av användning av Linux-RTC (realtisdklocka \- /dev/\:rtc) som
tidtagningsmekanism.
.
.TP
.B \-playlist <filnamn>
Spela filerna enligt en spellistsfil (ASX, Winamp, SMIL, eller en fil men en fil
att spela per rad).
.br
.I NOTERA:
Detta alternativ är tolkat som ett inlägg, så alternativ funna efter deta kommer
bara att appliceras på elementen i spellistan.
.br
-\"FIXME : This needs to be clarified and documented thoroughly. (org. text).
.
.TP
.B \-really-quiet (se även \-quiet)
Visa allt mindre information och statusmeddelande än med \-quiet.
.
.TP
.B \-rtc-device <enhet>
Använd specifierad enhet för RTC-tidtagning.
.
.TP
.B \-shuffle
Spela filerna i slumpvis ordning.
.
.TP
.B \-skin <namn> (Endast GUI)
Ladda angivet skin från en katalog vilke som standard är:
/usr/\:local/\:share/\:mplayer/\:Skin/\: samt ~/.mplayer/\:Skin/.
.sp 1
.I EXEMPEL:
.PD 0
.RSs
.IPs "\-skin fittyfene"
Försöker /usr/\:local/\:share/\:mplayer/\:Skin/\:fittyfene och efteråt ~/.mplayer/\:Skin/\:fittyfene.
.RE
.PD 1
.
.TP
.B \-slave (se även \-input)
Aktiverar slavmode, i vilken MPlayer arbetar såsom ett backend för andra
program. Istället för att ta tagentbordshändelser, så kommer MPlayer att läsa
kommandon från stdin.
.br
.I NOTERA:
Se '\-input cmdlist' för en lista över slavkommandon och
DOCS/\:tech/\:slave.txt för deras beskrivning.
.
.TP
.B \-softsleep
Använd högkvalitativa mjukvarutidtagningstidtagare istället för RTC. Såsom
precis som RTC utan att kräva speciella privilegier. Kommer med priset av högre
CPU-konsumtion.
.
.TP
.B \-speed <0.01\-100>
Sakta ner eller speeda upp uppspelning med faktorn given i parametern.
.
.TP
.B \-sstep <sekunder>
Visa en bildram var <sekunder> sekund. Användbart för slideshows.
\" FIXME slideshows???
.
.
.
.SH "DEMUXER/\:STREAM OPTIONS"
.
.TP
.B \-a52drc <level>
Select the Dynamic Range Compression level for AC3 audio streams.
<level> is a float value ranging from 0 to 1, where 0 means no compression
and 1 (which is the default) means full compression (make loud passages more
silent and vice versa).
This option only shows an effect if the AC3 stream contains the required range
compression information.
.
.TP
.B \-aid <ID> (also see \-alang)
Select audio channel (MPEG: 0\-31, AVI/\:OGM: 1\-99, ASF/\:RM: 0\-127,
VOB(AC3): 128\-159, VOB(LPCM): 160\-191, MPEG-TS 17\-8190).
MPlayer prints the available IDs when run in verbose (\-v) mode.
When playing an MPEG-TS stream, MPlayer/\:MEncoder will use the first program
(if present) with the chosen audio stream.
.
.TP
.B \-alang <language\ code> (also see \-aid)
Play the audio stream whose language matches the given code.
Different container formats employ different language codes.
DVDs use ISO 639-1 two letter language codes, Matroska and NUT use ISO 639-2
three letter language codes while OGM uses a free-form identifier.
MPlayer prints a list of available languages when run in verbose (\-v) mode.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "mplayer dvd://1 \-alang hu,en"
Chooses the Hungarian language track on a DVD and falls back on English if
Hungarian is not available.
.IPs "mplayer \-alang jpn example.mkv"
Plays a Matroska file in Japanese.
.RE
.PD 1
.
.TP
.B \-audio-demuxer <number> (\-audiofile only)
Force audio demuxer type for \-audiofile.
Give the demuxer ID as defined in libmpdemux/\:demuxer.h.
\-audio-demuxer 17 forces MP3.
.
.TP
.B \-audiofile <filename>
Play audio from an external file (WAV, MP3 or Ogg Vorbis) while viewing a
movie.
.
.TP
.B \-audiofile-cache <kBytes>
Enables caching for the stream used by \-audiofile, using the specified
amount of memory.
.
.TP
.B \-bandwidth <value> (network only)
Specify the maximum bandwidth for network streaming (for servers that are
able to send content in different bitrates).
Useful if you want to watch live streamed media behind a slow connection.
.
.TP
.B \-cdrom-device <path\ to\ device>
Specify the CD-ROM device (default: /dev/\:cdrom).
.
.TP
.B \-cache <kBytes>
This option specifies how much memory (in kBytes) to use when precaching a
file or URL.
Especially useful on slow media.
.
.TP
.B \-cache-min <percentage>
Playback will start when the cache fill threshold set with this option
is reached.
.
.TP
.B \-cache-prefill <percentage> (not yet implemented)
When the cache is emptied MPlayer will pause and restart playback when
the cache prefill threshold set with this option is reached.
.
.TP
.B \-cdda <option1:option2> (CDDA only)
This option can be used to tune the CD Audio reading feature of MPlayer.
.sp 1
Available options are:
.RSs
.IPs speed=<value>
Set CD spin speed.
.IPs paranoia=<0\-2>
Set paranoia level.
.RSss
0: disable checking
.br
1: overlap checking only (default)
.br
2: full data correction and verification
.REss
.IPs generic-dev=<value>
Use specified generic SCSI device.
.IPs sector-size=<value>
Set atomic read size.
.IPs overlap=<value>
Force minimum overlap search during verification to <value> sectors.
.IPs toc-bias
Assume that the beginning offset of track 1 as reported in the TOC will be
addressed as LBA\ 0.
Some Toshiba drives need this for getting track boundaries correct.
.IPs toc-offset=<value>
Add <value> sectors to the values reported when addressing tracks.
May be negative.
.IPs (no)skip
(Never) accept imperfect data reconstruction.
.RE
.
.TP
.B \-channels <number>
Change the number of playback channels (default: 2).
If the number of output channels is bigger than the number of input channels
empty channels are inserted (unless mixing from mono to stereo, then the mono
channel is repeated in both output channels).
If the number of output channels is smaller than the number of input channels,
results depend on the audio decoder (\-afm).
MPlayer asks the decoder to decode the audio into as many channels as
specified.
Now it's up to the decoder to fulfill the requirement.
If the decoder outputs more channels than requested, the exceeding channels
are truncated.
This is usually only important when playing videos with AC3 audio (like DVDs).
In that case liba52 does the decoding by default and correctly downmixes the
audio into the requested number of channels.
.br
.I NOTE:
This option is honored by codecs (AC3 only), filters (surround) and ao drivers
(OSS at least).
.sp 1
Available options are:
.sp 1
.PD 0
.RSs
.IPs 2
stereo
.IPs 4
surround
.IPs 6
full 5.1
.RE
.PD 1
.
.TP
.B \-chapter <chapter\ ID>[\-<end\ chapter\ ID>] (DVD only)
Specify which chapter to start playing at.
Optionally specify which chapter to end playing at (default: 1).
.
.TP
.B \-cookies (network only)
Send cookies when making HTTP requests.
.
.TP
.B \-cookies-file <filename> (network only)
Read HTTP cookies from <filename> (default: ~/.mozilla/ and ~/.netscape/)
and skip reading from default locations.
The file is assumed to be in Netscape format.
.
.TP
.B \-demuxer <number>
Force demuxer type.
Give the demuxer ID as defined in libmpdemux/\:demuxer.h.
\-demuxer 17 forces MP3.
.
.TP
.B \-dumpaudio (MPlayer only)
Dumps raw compressed audio stream to ./stream.dump (useful with MPEG/\:AC3).
.
.TP
.B \-dumpfile <filename> (MPlayer only)
Specify which file MPlayer should dump to.
Should be used together with \-dumpaudio / \-dumpvideo / \-dumpstream.
.
.TP
.B \-dumpstream (MPlayer only)
Dumps the raw stream to ./stream.dump.
Useful when ripping from DVD or network.
.
.TP
.B \-dumpvideo (MPlayer only)
Dump raw compressed video stream to ./stream.dump (not very usable).
.
.TP
.B \-dvbin <options> (DVB only)
Pass the following parameters to the DVB input module, in order to override
the default ones:
.sp 1
.PD 0
.RSs
.IPs card=<1\-4>
Specifies using card number 1\-4 (default: 1).
.IPs file=<filename>
Instructs MPlayer to read the channels list from <filename>.
Default is ~/.mplayer/\:channels.conf.{sat,ter,cbl} (based on your card type)
or ~/.mplayer/\:channels.conf as a last resort.
.RE
.PD 1
.
.TP
.B \-dvd-device <path\ to\ device> (DVD only)
Specify the DVD device (default: /dev/\:dvd).
You can also specify a directory that contains files previously copied directly
from a DVD (such as with vobcopy).
Note that using \-dumpstream is usually a better way to
copy DVD titles in the first place (see the examples).
.
.TP
.B \-dvdangle <angle\ ID> (DVD only)
Some DVD discs contain scenes that can be viewed from multiple angles.
Here you can tell MPlayer which angles to use (default: 1).
.
.TP
.B \-forceidx
Force index rebuilding.
Useful for files with broken index (A/\:V desync, etc).
This will enable seeking in files where seeking was not possible.
You can fix the index permanently with MEncoder (see the documentation).
.br
.I NOTE:
This option only works if the underlying media supports seeking
(i.e.\& not with stdin, pipe, etc).
.
.TP
.B \-fps <float value>
Override video framerate.
Useful if the original value is wrong or missing.
.
.TP
.B \-frames <number>
Play/\:convert only first <number> frames, then quit.
.
.TP
.B \-hr-mp3-seek (MP3 only)
Hi-res MP3 seeking.
Enabled when playing from an external MP3 file, as we need to seek
to the very exact position to keep A/\:V sync.
Can be slow especially when seeking backwards since it has to rewind
to the beginning to find an exact frame position.
.
.TP
.B \-idx (also see \-forceidx)
Rebuilds index of files if no index was found, allowing seeking.
Useful with broken/\:incomplete downloads, or badly created files.
.br
.I NOTE:
This option only works if the underlying media supports seeking
(i.e.\& not with stdin, pipe, etc).
.
.TP
.B \-ipv4-only-proxy (network only)
Skip the proxy for IPv6 addresses.
It will still be used for IPv4 connections.
.
.TP
.B \-loadidx <index file>
The file from which to read the video index data saved by \-saveidx.
This index will be used for seeking, overriding any index data
contained in the AVI itself.
MPlayer won't prevent you from loading an index file generated
from a different AVI, but this is sure to cause unfavorable results.
.br
.I NOTE:
This option is obsolete now that MPlayer has OpenDML support.
.
.TP
.B \-mc <seconds/\:frame>
maximum A-V sync correction per frame (in seconds)
.
.TP
.B \-mf <option1:option2:...>
Used when decoding from multiple PNG or JPEG files.
.sp 1
Available options are:
.sp 1
.PD 0
.RSs
.IPs w=<value>
output width (default: autodetect)
.IPs h=<value>
output height (default: autodetect)
.IPs fps=<value>
output fps (default: 25)
.IPs type=<value>
input file type (available: jpeg, png, tga, sgi)
.RE
.PD 1
.
.TP
.B \-ni (AVI only)
Force usage of non-interleaved AVI parser (fixes playback
of some bad AVI files).
.
.TP
.B \-nobps (AVI only)
Do not use average byte/\:second value for A-V sync.
Helps with some AVI files with broken header.
.
.TP
.B \-noextbased
Disables extension-based demuxer selection.
By default, when the file type (demuxer) cannot be detected reliably
(the file has no header or it is not reliable enough), the filename
extension is used to select the demuxer.
Always falls back on content-based demuxer selection.
.
.TP
.B \-passwd <password> (also see \-user) (network only)
Specify password for HTTP authentication.
.
.TP
.B \-prefer-ipv4 (network only)
Use IPv4 on network connections.
Falls back on IPv6 automatically.
.
.TP
.B \-prefer-ipv6 (IPv6 network only)
Use IPv6 on network connections.
Falls back on IPv4 automatically.
.
.TP
.B \-rawaudio <option1:option2:...>
This option lets you play raw audio files.
It may also be used to play audio CDs which are not 44KHz 16-bit stereo.
For playing raw AC3 streams use \-rawaudio on:format=0x2000.
.sp 1
Available options are:
.sp 1
.PD 0
.RSs
.IPs on\ \ \
Use raw audio demuxer.
.IPs channels=<value>
number of channels
.IPs rate=<value>
rate in samples per second
.IPs samplesize=<value>
sample size in bytes
.IPs bitrate=<value>
bitrate for rawaudio files
.IPs format=<value>
fourcc in hex
.RE
.PD 1
.
.TP
.B \-rawvideo <option1:option2:...>
This option lets you play raw video files.
.sp 1
Available options are:
.sp 1
.PD 0
.RSs
.IPs on\ \ \
Use raw video demuxer.
.IPs fps=<value>
rate in frames per second (default: 25.0)
.IPs sqcif|qcif|cif|4cif|pal|ntsc
set standard image size
.IPs w=<value>
image width in pixels
.IPs h=<value>
image height in pixels
.IPs i420|yv12|yuy2|y8
set colorspace
.IPs format=<value>
colorspace (fourcc) in hex
.IPs size=<value>
frame size in Bytes
.RE
.PD 1
.
.TP
.B \-rtsp-stream-over-tcp (live.com only)
Used with 'rtsp://' URLs to specify that the resulting incoming RTP and RTCP
packets be streamed over TCP (using the same TCP connection as RTSP).
This option may be useful if you have a broken internet connection that does
not pass incoming UDP packets (see http://www.live.com/\:mplayer/).
.
.TP
.B \-saveidx <filename>
Force index rebuilding and dump the index to <filename>.
Currently this only works with AVI files.
.br
.I NOTE:
This option is obsolete now that MPlayer has OpenDML support.
.
.TP
.B \-sb <byte\ position> (also see \-ss)
Seek to byte position.
Useful for playback from CD-ROM images or VOB files with junk at the beginning.
.
.TP
.B \-srate <Hz>
Selects the given output sampling rate, resampling if necessary.
The type of resampling can be controlled by the \-af-adv option.
The default is fast resampling that may cause distortion.
MEncoder passes this value to LAME for resampling.
.
.TP
.B \-ss <time> (also see \-sb)
Seek to given time position.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-ss 56"
Seeks to 56 seconds.
.IPs "\-ss 01:10:00"
Seeks to 1\ hour 10\ min.
.RE
.PD 1
.
.TP
.B \-tskeepbroken
Tells MPlayer not to discard TS packets reported as broken in the stream.
Sometimes needed to play corrupted MPEG-TS files.
.
.TP
.B \-tsprobe <byte\ position>
When playing an MPEG-TS stream, this option lets you specify how many
bytes in the stream you want MPlayer to search for the desired
audio and video pids.
.
.TP
.B \-tsprog <1\-65534>
When playing an MPEG-TS stream, you can specify with this option which
program (if present) you want to play.
Can be used with \-vid and \-aid.
.
.TP
.B \-tv <option1:option2:...> (TV only)
This option tunes various properties of the TV capture module.
For watching TV with MPlayer, use 'tv://' or 'tv://<channel_number>'
or even 'tv://<channel_name> (see option channels for channel_name below)
as a movie URL.
.sp 1
Available options are:
.RSs
.IPs noaudio
no sound
.IPs driver=<value>
available: dummy, v4l, v4l2, bsdbt848
.IPs device=<value>
Specify TV device (default: /dev/\:video0).
.IPs input=<value>
Specify input (default: 0 (TV), see console output for available inputs).
.IPs freq=<value>
Specify the frequency to set the tuner to (e.g.\& 511.250).
Not compatible with the channels parameter.
.IPs outfmt=<value>
Specify the output format of the tuner with a preset value supported by the
V4L driver (yv12, rgb32, rgb24, rgb16, rgb15, uyvy, yuy2, i420) or an
arbitrary format given as hex value.
Try outfmt=help for a list of all available formats.
.IPs width=<value>
output window width
.IPs height=<value>
output window height
.IPs fps=<value>
framerate at which to capture video (frames per second)
.IPs buffersize=<value>
maximum size of the capture buffer in megabytes (default: dynamical)
.IPs norm=<value>
available: PAL, SECAM, NTSC.
For v4l2 use the normid option below.
.IPs "normid=<value> (v4l2 only)"
See console output for a list of available TV norms.
.IPs channel=<value>
Set tuner to <value> channel.
.IPs chanlist=<value>
available: europe-east, europe-west, us-bcast, us-cable, etc
.IPs channels=<channel>\-<name>,<channel>\-<name>,...
Set names for channels.
Use _ for spaces in names (or play with quoting ;-).
The channel names will then be written using OSD, and the slave commands
tv_step_channel, tv_set_channel and tv_last_channel will be usable for
a remote control (see LIRC).
Not compatible with the frequency parameter.
.br
.I NOTE:
The channel number will then be the position in the 'channels' list,
beginning with 1.
.br
.I EXAMPLE:
tv://1, tv://TV1, tv_set_channel 1, tv_set_channel TV1
.IPs [brightness|contrast|hue|saturation]=<-100\-100>
Set the image equalizer on the card.
.IPs audiorate=<value>
Set audio capture bitrate.
.IPs forceaudio
Capture audio even if there are no audio sources reported by v4l.
.IPs alsa\
Capture from ALSA.
.IPs amode=<0\-3>
Choose an audio mode:
.RSss
0: mono
.br
1: stereo
.br
2: language 1
.br
3: language 2
.REss
.IPs forcechan=<1\-2>
By default, the count of recorded audio channels is determined automatically
by querying the audio mode from the TV card.
This option allows forcing stereo/\:mono recording regardless of the amode
option and the values returned by v4l.
This can be used for troubleshooting when the TV card is unable to report the
current audio mode.
.IPs adevice=<value>
Set an audio device.
<value> should be /dev/\:xxx for OSS and a hardware ID for ALSA.
See the \-ao alsa documentation to find out how to specify the hardware ID.
.IPs audioid=<value>
Choose an audio output of the capture card, if it has more than one.
.IPs "[volume|bass|treble|balance]=<0\-65535> (v4l1)"
.IPs "[volume|bass|treble|balance]=<0\-100> (v4l2)"
These options set parameters of the mixer on the video capture card.
They will have no effect, if your card does not have one.
For v4l2 50 maps to the default value of the
control, as reported by the driver.
.IPs immediatemode=<bool>
A value of 0 means capture and buffer audio and video together
(default for MEncoder).
A value of 1 (default for MPlayer) means to do video capture only and let the
audio go through a loopback cable from the TV card to the sound card.
.IPs mjpeg
Use hardware MJPEG compression (if the card supports it).
When using this option, you do not need to specify the width and height
of the output window, because MPlayer will determine it automatically
from the decimation value (see below).
.IPs decimation=<1,2,4>
choose the size of the picture that will be compressed by hardware
MJPEG compression:
.RSss
1: full size
    704x576    PAL
    704x480    NTSC
.br
2: medium size
    352x288    PAL
    352x240    NTSC
.br
4: small size
    176x144    PAL
    176x120    NTSC
.REss
.IPs quality=<0\-100>
Choose the quality of the JPEG compression
(< 60 recommended for full size).
.RE
.
.TP
.B \-user <username> (also see \-passwd) (network only)
Specify username for HTTP authentication.
.
.TP
.B \-user-agent <string>
Use <string> as user agent for HTTP streaming.
.
.TP
.B \-vid <ID>
Select video channel (MPG: 0\-15, ASF: 0\-255, MPEG-TS: 17\-8190).
When playing an MPEG-TS stream, MPlayer/\:MEncoder will use the first program
(if present) with the chosen video stream.
.
.TP
.B \-vivo <sub-options> (DEBUG CODE)
Force audio parameters for the VIVO demuxer (for debugging purposes).
.
.
.
.SH "OSD/\:SUB OPTIONS"
.I NOTE:
Also see \-vf expand.
.
.TP
.B \-dumpjacosub (MPlayer only)
Convert the given subtitle (specified with the \-sub option) to the time-based
JACOsub subtitle format.
Creates a dumpsub.js file in the current directory.
.
.TP
.B \-dumpmicrodvdsub (MPlayer only)
Convert the given subtitle (specified with the \-sub option) to the
MicroDVD subtitle format.
Creates a dumpsub.sub file in the current directory.
.
.TP
.B \-dumpmpsub (MPlayer only)
Convert the given subtitle (specified with the \-sub option) to MPlayer's
subtitle format, MPsub.
Creates a dump.mpsub file in the current directory.
.
.TP
.B \-dumpsami (MPlayer only)
Convert the given subtitle (specified with the \-sub option) to the time-based
SAMI subtitle format.
Creates a dumpsub.smi file in the current directory.
.
.TP
.B \-dumpsrtsub (MPlayer only)
Convert the given subtitle (specified with the \-sub option) to the time-based
SubViewer (SRT) subtitle format.
Creates a dumpsub.srt file in the current directory.
.
.TP
.B \-dumpsub (MPlayer only) (BETA CODE)
Dumps the subtitle substream from VOB streams.
Also see the \-dump*sub and \-vobsubout* options.
.
.TP
.B \-ffactor <number> (OSD only)
Resample the font alphamap.
Can be:
.PD 0
.RSs
.IPs 0
plain white fonts
.IPs 0.75
very narrow black outline (default)
.IPs 1
narrow black outline
.IPs 10
bold black outline
.RE
.PD 1
.
.TP
.B \-flip-hebrew (FriBiDi only)
Turns on flipping subtitles using FriBiDi.
.
.TP
.B \-noflip-hebrew-commas
Change FriBiDi's assumptions about the placements of commas in subtitles.
Use this if commas in subtitles are shown at the start of a sentence
instead of at the end.
.TP
.B \-font <path\ to\ font.desc\ file> (OSD only)
Search for the OSD/\:SUB fonts in an alternative directory (default for normal
fonts: ~/\:.mplayer/\:font/\:font.desc, default for FreeType fonts:
~/.mplayer/\:subfont.ttf).
.br
.I NOTE:
With FreeType, this option determines the path to the text font file.
With fontconfig, this option determines the fontconfig font name.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
\-font ~/\:.mplayer/\:arial-14/\:font.desc
.br
\-font ~/\:.mplayer/\:arialuni.ttf
.br
\-font 'Bitstream Vera Sans'
.RE
.PD 1
.
.TP
.B \-fontconfig (fontconfig only)
Enables the usage of fontconfig managed fonts.
.
.TP
.B \-forcedsubsonly
Display only forced subtitles for the DVD subtitle stream selected by e.g.\&
\-slang.
.
.TP
.B \-fribidi-charset <charset\ name> (FriBiDi only)
Specifies the character set that will be passed to FriBiDi when
decoding non-UTF-8 subtitles (default: ISO8859-8).
.
.TP
.B \-ifo <VOBsub\ ifo\ file>
Indicate the file that will be used to load palette and frame size for VOBsub
subtitles.
.
.TP
.B \-noautosub
Turns off automatic subtitle file loading.
.
.TP
.B \-osdlevel <0\-3> (MPlayer only)
Specifies which mode the OSD should start in.
.PD 0
.RSs
.IPs 0
subtitles only
.IPs 1
volume + seek (default)
.IPs 2
volume + seek + timer + percentage
.IPs 3
volume + seek + timer + percentage + total time
.RE
.PD 1
.
.TP
.B \-overlapsub
Allows the next subtitle to be displayed while the current one is
still visible (default is to enable the support only for specific
formats).
.
.TP
.B \-sid <ID> (also see \-slang option)
Display DVD subtitles in the language specified by <ID> (0\-31).
MPlayer prints the available subtitle languages when run in verbose (\-v) mode.
.
.TP
.B \-slang <country\ code[,country\ code,...]> (also see \-sid)
Specify a priority list of DVD subtitle languages to use.
Languages must be given as two letter country codes.
MPlayer prints the available subtitle languages when run in verbose (\-v) mode.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-slang hu,en"
Selects Hungarian and falls back on English if Hungarian is not available.
.RE
.PD 1
.
.TP
.B \-spuaa <mode> (OSD only)
Antialiasing/\:scaling mode for DVD/\:VOBsub.
A value of 16 may be added to <mode> in order to force scaling even
when original and scaled frame size already match.
This can be employed to e.g.\& smooth subtitles with gaussian blur.
Available modes are:
.PD 0
.RSs
.IPs 0
none (fastest, very ugly)
.IPs 1
approximate (broken?)
.IPs 2
full (slow)
.IPs 3
bilinear (default, fast and not too bad)
.IPs 4
uses swscaler gaussian blur (looks very good)
.RE
.PD 1
.
.TP
.B \-spualign <-1\-2> (OSD only)
Specify how SPU (DVD/\:VOBsub) subtitles should be aligned.
.PD 0
.RSs
.IPs -1
original position
.IPs 0
align at top (original/\:default behavior)
.IPs 1
align at center
.IPs 2
align at bottom
.RE
.PD 1
.
.TP
.B \-spugauss <0.0\-3.0> (OSD only)
Variance parameter of gaussian used by \-spuaa 4.
Higher means more blur (default: 1.0).
.
.TP
.B \-sub <subtitlefile1,subtitlefile2,...>
Use/\:display these subtitle files.
Only one file can be displayed at the same time.
.
.TP
.B \-sub-bg-alpha <0\-255>
Specify the alpha channel value for subtitles and OSD backgrounds.
Big values mean more transparency.
0 means completely transparent.
.
.TP
.B \-sub-bg-color <0\-255>
Specify the color value for subtitles and OSD backgrounds.
Currently subtitles are grayscale so this value is equivalente to the
intensity of the color.
255 means white and 0 black.
.
.TP
.B \-sub-demuxer <number> (\-subfile only) (BETA CODE)
Force subtitle demuxer type for \-subfile.
Give the demuxer ID as defined in subreader.h.
.
.TP
.B \-sub-fuzziness <mode>
Adjust matching fuzziness when searching for subtitles:
.PD 0
.RSs
.IPs 0
exact match
.IPs 1
Load all subs containing movie name.
.IPs 2
Load all subs in the current directory.
.RE
.PD 1
.
.TP
.B \-sub-no-text-pp
Disables any kind of text post processing done after loading the subtitles.
Used for debug purposes.
.
.TP
.B \-subalign <0\-2> (OSD only)
Specify how subtitles should be aligned with \-subpos.
.PD 0
.RSs
.IPs 0
Align at top (original/\:default behavior).
.IPs 1
Align at center.
.IPs 2
Align at bottom.
.RE
.PD 1
.
.TP
.B \-subcc \
Display DVD Closed Caption (CC) subtitles.
These are NOT the VOB subtitles, these are special ASCII subtitles for the
hearing impaired encoded in the VOB userdata stream on most region 1 DVDs.
CC subtitles have not been spotted on DVDs from other regions so far.
.
.TP
.B \-subcp <codepage> (iconv only)
If your system supports iconv(3), you can use this option to
specify the subtitle codepage.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
\-subcp latin2
.br
\-subcp cp1250
.RE
.PD 1
.
.TP
.B \-subcp enca:<language>:<fallback codepage> (ENCA only)
You can specify your language using a two letter language code to
make ENCA detect the codepage automatically.
If unsure, enter anything and watch mplayer \-v output for available
languages.
Fallback codepage specifies the codepage to use, when autodetection fails.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-subcp enca:cs:latin2"
Guess the encoding, assuming the subtitles are Czech, fall back on
latin 2, if the detection fails.
.IPs "\-subcp enca:pl:cp1250"
Guess the encoding for Polish, fall back on cp1250.
.RE
.PD 1
.
.TP
.B \-subdelay <sec>
Delays subtitles by <sec> seconds.
Can be negative.
.
.TP
.B \-subfile <filename> (BETA CODE)
Currently useless.
Same as \-audiofile, but for subtitle streams (OggDS?).
.
.TP
.B \-subfont-autoscale <0\-3> (FreeType only)
Sets the autoscale mode.
.br
.I NOTE:
0 means that text scale and OSD scale are font heights in points.
.sp 1
The mode can be:
.sp 1
.PD 0
.RSs
.IPs 0
no autoscale
.IPs 1
proportional to movie height
.IPs 2
proportional to movie width
.IPs 3
proportional to movie diagonal (default)
.RE
.PD 1
.
.TP
.B \-subfont-blur <0\-8> (FreeType only)
Sets the font blur radius (default: 2).
.
.TP
.B \-subfont-encoding <value> (FreeType only)
Sets the font encoding.
When set to 'unicode', all the glyphs from the font file will be rendered and
unicode will be used (default: unicode).
.
.TP
.B \-subfont-osd-scale <0\-100> (FreeType only)
Sets the autoscale coefficient of the OSD elements (default: 6).
.
.TP
.B \-subfont-outline <0\-8> (FreeType only)
Sets the font outline thickness (default: 2).
.
.TP
.B \-subfont-text-scale <0\-100> (FreeType only)
Sets the subtitle text autoscale coefficient as percentage of the
screen size (default: 5).
.
.TP
.B \-subfps <rate>
Specify the framerate of the subtitle file (default: movie fps).
.br
.I NOTE:
Only for frame-based subtitle files, i.e.\& MicroDVD format.
.
.TP
.B \-subpos <0\-100> (useful with \-vf expand) (OSD only)
Specify the position of subtitles on the screen.
The value is the vertical position of the subtitle in % of the screen height.
.
.TP
.B \-subwidth <10\-100> (OSD only)
Specify the maximum width of subtitles on the screen.
Useful for TV-out.
The value is the width of the subtitle in % of the screen width.
.
.TP
.B \-unicode
Tells MPlayer to handle the subtitle file as unicode.
.
.TP
.B \-utf8 \ \
Tells MPlayer to handle the subtitle file as UTF-8.
.
.TP
.B \-vobsub <VOBsub\ file\ without\ extension>
Specify a VOBsub file to use for subtitles.
Has to be the full pathname without extension, i.e.\& without
the '.idx', '.ifo' or '.sub'.
.
.TP
.B \-vobsubid <0\-31>
Specify the VOBsub subtitle ID.
.
.
.
.SH "AUDIO OUTPUT OPTIONS (MPLAYER ONLY)"
.
.TP
.B \-abs <value> (\-ao oss only) (OBSOLETE)
Override audio driver/\:card buffer size detection.
.
.TP
.B \-aofile <filename>
Override the default filename employed by \-ao pcm.
.
.TP
.B \-aop <list=plugin1,plugin2...:option1=value1:opt2=val2...>
Specify audio plugin(s) and their options
(also see the audio plugins section of the documentation).
.sp 1
Available options are:
.RSs
.IPs list=[plugins]
comma separated list of plugins (resample, surround, format, volume,
extrastereo, volnorm, delay)
.IPs delay=<sec>
example plugin, do not use (delay plugin only)
.IPs format=<format>
output format (format plugin only)
.IPs fout=<Hz>
output frequency (resample plugin only)
.IPs volume=<0\-255>
volume (volume plugin only)
.IPs mul=<value>
stereo coefficient (default: 2.5) (extrastereo plugin only)
.IPs softclip
compressor / 'soft-clipping' capabilities (volume plugin only)
.RE
.
.TP
.B \-delay <sec>
Audio delay in seconds (positive or negative float value).
.
.TP
.B \-format <0\-8192>
Select the format used for output from the filter layer (according to the
defines in libao2/\:afmt.h):
.PD 0
.RSs
.IPs 1
Mu-Law
.IPs 2
A-Law
.IPs 4
Ima-ADPCM
.IPs 8
unsigned 8-bit
.IPs 16
signed 16-bit (little-endian)
.IPs 32
signed 16-bit (big-endian)
.IPs 64
signed 8-bit
.IPs 128
unsigned 16-bit (little-endian)
.IPs 256
unsigned 16-bit (big-endian)
.IPs 512
MPEG (2) Audio
.IPs 1024
AC3
.IPs 4096
signed 32-bit (little-endian)
.IPs 8192
signed 32-bit (big-endian)
.RE
.PD 1
.
.TP
.B \-mixer <device>
Use a mixer device different from the default /dev/\:mixer.
For ALSA this is the mixer name.
.
.TP
.B \-mixer-channel <mixer line>[,mixer index] (\-ao oss and \-ao alsa only)
This option will tell MPlayer to use a different channel for controlling
volume than the default PCM.
Options for OSS include
.B vol, pcm, line.
For a complete list of options look for SOUND_DEVICE_NAMES in
/usr/\:include/\:linux/\:soundcard.h.
For ALSA you can use the names e.g.\& alsamixer displays, like
.B Master, Line, PCM.
.br
.I NOTE:
ALSA mixer channel names followed by a number must be specified in the
<name,number> format, i.e.\& a channel labeled 'PCM 1' in alsamixer must
be converted to
.BR PCM,1 .
.
.TP
.B \-nowaveheader (\-ao pcm only)
Don't include wave header.
Used for raw PCM.
.
.TP
.B \-volstep <0\-100>
Set the step size of mixer volume changes in percent of the whole range
(default: 3).
.
.
.
.SH "AUDIO OUTPUT DRIVERS (MPLAYER ONLY)"
Audio output drivers are interfaces to different audio output facilities.
The syntax is:
.
.TP
.B \-ao <driver1[:suboption1[=value]:...],driver2,...[,]>
Specify a priority list of audio output drivers to be used.
.PP
If the list has a trailing ',' MPlayer will fall back on drivers not
contained in the list.
Suboptions are optional and can mostly be omitted.
.br
.I NOTE:
See \-ao help for a list of compiled-in audio output drivers.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-ao alsa,oss,"
Try the ALSA driver, then the OSS driver, then others.
.IPs "\-ao alsa:mmap:noblock:device=hw=0.3"
Sets noblock-mode, mmap-mode and the device-name as first card, fourth device.
.RE
.PD 1
.sp 1
Available audio output drivers are:
.
.TP
.B alsa\ \ \
ALSA 0.9/\:1.x audio output driver.
.PD 0
.RSs
.IPs mmap\ \ \
Sets experimental mmap-mode (does not work for more than 2 channels).
.IPs noblock
Sets noblock-mode.
.IPs device=<device>
Sets the device name.
Replace any ',' with '.' and any ':' with '=' in the ALSA device name.
Make sure you do not set this when you want hwac3 output via S/PDIF, unless
you really know how to set it correctly.
.RE
.PD 1
.
.TP
.B alsa1x (OBSOLETE)
ALSA 1.x audio output driver.
Obsoleted by the general alsa audio output driver.
.
.TP
.B alsa9 (OBSOLETE)
ALSA 0.9 audio output driver.
Obsoleted by the general alsa audio output driver.
.
.TP
.B alsa5\ \
ALSA 0.5 audio output driver.
.
.TP
.B oss\ \ \ \
OSS audio output driver
.PD 0
.RSs
.IPs dsp-device
Sets the audio-output device (default: /dev/\:dsp).
.RE
.PD 1
.
.TP
.B sdl\ \ \ \
Highly platform independent SDL (Simple Directmedia Layer) library
audio output driver.
.PD 0
.RSs
.IPs <driver>
Explicitly choose the SDL audio driver to use (default: let SDL choose).
.RE
.PD 1
.
.TP
.B arts\ \ \
Audio output through the Arts daemon.
.
.TP
.B esd\ \ \ \
Audio output through the ESD daemon.
.PD 0
.RSs
.IPs <server>
Explicitly choose the ESD server to use (default: localhost).
.RE
.PD 1
.
.TP
.B jack\ \ \ \
Audio output through JACK (Jack Audio Connection Kit).
.
.TP
.B nas\ \ \ \
Audio output through NAS.
.
.TP
.B macosx (Mac OS X only)
Native Mac OS X audio output driver.
.
.TP
.B sgi (SGI only)
Native SGI audio output driver.
.
.TP
.B sun (Sun only)
Native Sun audio output driver.
.PD 0
.RSs
.IPs <device>
Explicitly choose the audio device to use (default: /dev/\:audio).
.RE
.PD 1
.
.TP
.B win32 (Windows only)
Native Windows waveout audio output driver.
.
.TP
.B dxr2 (also see \-dxr2) (DXR2 only)
Creative DXR2 specific output driver.
.
.TP
.B mpegpes (DVB only)
DVB specific output driver.
.
.TP
.B null\ \ \
Produces no audio output but maintains video playback speed.
Use \-nosound for benchmarking.
.
.TP
.B pcm (also see \-aofile)
Raw PCM/\:wave file writer audio output.
Writes the sound to ./audiodump.wav.
.
.TP
.B plugin\ \
Plugin audio output driver.
.
.
.
.SH "VIDEO OUTPUT OPTIONS (MPLAYER ONLY)"
.
.TP
.B \-aa* (\-vo aa only)
You can get a list and an explanation of available options executing
.I mplayer \-aahelp
.
.TP
.B \-adapter <value>
Set the graphics card that will receive the image.
Needs the \-vm option to work.
You can get a list of available cards when you run this option with \-v.
Works currently only with \-vo directx.
.
.TP
.B \-bpp <depth>
Override the autodetected color depth.
Only supported by the fbdev, dga, svga, vesa video output drivers.
.
.TP
.B \-brightness <-100\-100>
Adjust the brightness of the video signal (default: 0).
Not supported by all video output drivers.
.
.TP
.B \-contrast <-100\-100>
Adjust the contrast of the video signal (default: 0).
Not supported by all video output drivers.
.
.TP
.B \-dfbopts <value> (\-vo directfb only)
Specify a parameter list for the directfb video output driver.
.
.TP
.B \-display <name> (X11 only)
Specify the hostname and display number of the X server you want to display
on.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
\-display xtest.localdomain:0
.RE
.PD 1
.
.TP
.B \-double
Enables double buffering.
Fixes flicker by storing two frames in memory, and displaying one while
decoding another.
Can affect OSD negatively, but often it removes OSD flickering.
Needs twice the memory of a single buffer, so it won't work on cards with
very little video memory.
.
.TP
.B \-dr \ \ \
Turns on direct rendering (not supported by all codecs and video outputs)
.br
.I WARNING:
May cause OSD/\:SUB corruption!
.
.TP
.B \-dxr2 <option1:option2:...>
This option is used to control the dxr2 video output driver.
.RSs
.IPs ar-mode=<value>
aspect ratio mode (0 = normal, 1 = pan-and-scan, 2 = letterbox (default))
.IPs iec958-encoded
Set iec958 output mode to encoded.
.IPs iec958-decoded
Set iec958 output mode to decoded (default).
.IPs macrovision=<value>
macrovision mode (0 = off (default), 1 = agc, 2 = agc 2 colorstripe,
3 = agc 4 colorstripe)
.IPs mute\
mute sound output
.IPs unmute
unmute sound output
.IPs ucode=<value>
path to the microcode
.RE
.RS
.sp 1
.I TV output
.RE
.RSs
.IPs 75ire
enable 7.5 IRE output mode
.IPs no75ire
disable 7.5 IRE output mode (default)
.IPs bw\ \ \
b/\:w TV output
.IPs color
color TV output (default)
.IPs interlaced
interlaced TV output (default)
.IPs nointerlaced
disable interlaced TV output
.IPs norm=<value>
TV norm (ntsc (default), pal, pal60, palm, paln, palnc)
.IPs square-pixel
set pixel mode to square
.IPs ccir601-pixel
set pixel mode to ccir601
.RE
.RS
.sp 1
.I overlay
.RE
.RSs
.IPs cr-left=<0\-500>
Set the left cropping value (default: 50).
.IPs cr-right=<0\-500>
Set the right cropping value (default: 300).
.IPs cr-top=<0\-500>
Set the top cropping value (default: 0).
.IPs cr-bottom=<0\-500>
Set the bottom cropping value (default: 0).
.IPs ck-[r|g|b]=<0\-255>
Set the r(ed), g(reen) or b(lue) gain of the overlay color-key.
.IPs ck-[r|g|b]min=<0\-255>
minimum value for the respective color key
.IPs ck-[r|g|b]max=<0\-255>
maximum value for the respective color key
.IPs ignore-cache
Ignore cached overlay settings.
.IPs update-cache
Update cached overlay settings.
.IPs ol-osd
Enable overlay onscreen display.
.IPs nool-osd
Disable overlay onscreen display (default).
.IPs ol[h|w|x|y]-cor=<-20\-20>
Adjust the overlay size (h,w) and position (x,y) in case it does not
match the window perfectly (default: 0).
.IPs overlay
Activate overlay (default).
.IPs nooverlay
Activate TVout.
.IPs overlay-ratio=<1\-2500>
Tune the overlay (default: 1000).
.RE
.
.TP
.B \-fb <device> (\-vo fbdev or directfb only) (OBSOLETE)
Specifies the framebuffer device to use (default: /dev/\:fb0).
.
.TP
.B \-fbmode <modename> (\-vo fbdev only)
Change video mode to the one that is labeled as <modename> in
/etc/\:fb.modes.
.br
.I NOTE:
VESA framebuffer doesn't support mode changing.
.
.TP
.B \-fbmodeconfig <filename> (\-vo fbdev only)
Override framebuffer mode configuration file (default: /etc/\:fb.modes).
.
.TP
.B \-forcexv (\-vo sdl only)
Force using XVideo through the sdl video output driver.
.
.TP
.B \-fs (also see \-zoom)
Fullscreen playback (centers movie, and paints black bands around it).
Not supported by all video output drivers.
.
.TP
.B \-fsmode-dontuse <0\-31> (OBSOLETE, use the \-fs option)
Try this option if you still experience fullscreen problems.
.
.TP
.B \-fstype <type1,type2,...> (X11 only)
Specify a priority list of fullscreen modes to be used.
You can negate the modes by prefixing them with '\-'.
If you experience problems like the fullscreen window being covered
by other windows try using a different order.
.br
.I NOTE:
See \-fstype help for a full list of available modes.
.sp 1
The available types are:
.sp 1
.PD 0
.RSs
.IPs above
Use the _NETWM_STATE_ABOVE hint if available.
.IPs below
Use the _NETWM_STATE_BELOW hint if available.
.IPs fullscreen
Use the _NETWM_STATE_FULLSCREEN hint if available.
.IPs layer
Use the _WIN_LAYER hint with the default layer.
.IPs layer=<0...15>
Use the _WIN_LAYER hint with the given layer number.
.IPs netwm
Force NETWM style.
.IPs none\
Do not set fullscreen window layer.
.IPs stays_on_top
Use _NETWM_STATE_STAYS_ON_TOP hint if available.
.REss
.sp 1
.RS
.I EXAMPLE:
.RE
.PD 0
.RSs
.IPs layer,stays_on_top,above,fullscreen
Default order, will be used as a fallback if incorrect or
unsupported modes are specified.
.IPs \-fullscreen
Fixes fullscreen switching on OpenBox 1.x.
.RE
.PD 1
.
.TP
.B \-geometry x[%][:y[%]] or [WxH][+x+y]
Adjust where the output is on the screen initially.
The x and y specifications are in pixels measured from the top-left of the
screen to the top-left of the image being displayed, however if a percentage
sign is given after the argument it turns the value into a percentage of the
screen size in that direction.
It also supports the standard X11 \-geometry option format.
.br
.I NOTE:
This option is only supported by the x11, xmga, xv, xvmc, xvidix,
directx and tdfxfb video output drivers.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs 50:40
Places the window at x=50, y=40.
.IPs 50%:50%
Places the window in the middle of the screen.
.IPs 100%\
Places the window at the middle of the right edge of the screen.
.IPs 100%:100%
Places the window at the bottom right corner of the screen.
.RE
.PD 1
.
.TP
.B \-guiwid <window\ ID> (also see \-wid) (GUI only)
This tells the GUI to also use an X11 window and stick itself to the bottom
of the video, which is useful to embed a mini-GUI in a browser (with the
MPlayer plugin for instance).
.
.TP
.B \-hue <-100\-100>
Adjust the hue of the video signal (default: 0).
You can get a colored negative of the image with this option.
Not supported by all video output drivers.
.
.TP
.B \-monitor-dotclock <range[,range,...]> (\-vo fbdev and vesa only)
Specify the dotclock or pixelclock range of the monitor.
.
.TP
.B \-monitor-hfreq <range[,range,...]> (\-vo fbdev and vesa only)
Specify the horizontal frequency range of the monitor.
.
.TP
.B \-monitor-vfreq <range[,range,...]> (\-vo fbdev and vesa only)
Specify the vertical frequency range of the monitor.
.
.TP
.B \-monitoraspect <ratio> (also see \-aspect)
Set the aspect ratio of your monitor or TV screen.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
\-monitoraspect 4:3  or 1.3333
.br
\-monitoraspect 16:9 or 1.7777
.RE
.PD 1
.
.TP
.B \-nograbpointer
Do not grab the mouse pointer after a video mode change (\-vm).
Useful for multihead setups.
.
.TP
.B \-nokeepaspect
Do not keep window aspect ratio when resizing windows.
Only works with the x11, xv, xmga, xvidix, directx video output drivers.
Furthermore under X11 your window manager has to honor window aspect hints.
.
.TP
.B \-noxv (\-vo sdl only)
Disables using XVideo through the sdl video output driver.
.
.TP
.B \-ontop\
Makes the player window stay on top of other windows.
Supported by video output drivers which use X11, except SDL,
as well as directx and gl2.
.
.TP
.B \-panscan <0.0\-1.0>
Enables pan-and-scan functionality (cropping the sides of e.g.\& a 16:9
movie to make it fit a 4:3 display without black bands).
The range controls how much of the image is cropped.
Only works with the xv, xmga, mga, gl and xvidix video output drivers.
.
.TP
.B \-refreshrate <Hz>
Set the monitor refreshrate in Hz.
Currently only supported by \-vo directx combined with the \-vm option.
.
.TP
.B \-rootwin
Play movie in the root window (desktop background).
Desktop background images may cover the movie window, though.
Only works with the x11, xv, xmga, xvidix, quartz and directx video output
drivers.
.
.TP
.B \-saturation <-100\-100>
Adjust the saturation of the video signal (default: 0).
You can get grayscale output with this option.
Not supported by all video output drivers.
.
.TP
.B \-screenh <pixels>
Specify the vertical screen resolution for video output drivers which
do not know the screen resolution like fbdev, x11 and TVout.
.
.TP
.B \-screenw <pixels>
Specify the horizontal screen resolution for video output drivers which
do not know the screen resolution like fbdev, x11 and TVout.
.
.TP
.B \-stop-xscreensaver (X11 only)
Turns off xscreensaver at startup and turns it on again on exit.
.
.TP
.B \-vm \ \ \
Try to change to a different video mode.
Supported by the dga, x11, xv, sdl and directx video output drivers.
If used with the directx video output driver the \-screenw,
\-screenh, \-bpp and \-refreshrate options can be used to set
the new display mode.
.
.TP
.B \-vsync \ \
Enables VBI for the vesa, dfbmga and svga video output drivers.
.
.TP
.B \-wid <window\ ID> (also see \-guiwid) (X11 only)
This tells MPlayer to attach to an existing X11 window.
Useful to embed MPlayer in a browser (e.g.\& the plugger extension).
.
.TP
.B \-xineramascreen <0\-...>
In Xinerama configurations (i.e.\& a single desktop that spans across multiple
displays) this option tells MPlayer which screen to display movie on.
.
.TP
.B \-z <0\-9> (\-vo png only)
Specifies the compression level of the png video output driver.
0 is no compression, 9 is the maximum compression.
.
.TP
.B \-zrbw (\-vo zr only)
Display in black and white.
For optimal performance, this can be combined with '\-lavdopts gray'.
.
.TP
.B \-zrcrop <[width]x[height]+[x offset]+[y offset]> (\-vo zr only)
Select a part of the input image to display, multiple occurences
of this option switch on cinerama mode.
In cinerama mode the movie is distributed over more than one TV
(or beamer) to create a larger image.
Options appearing after the n-th \-zrcrop apply to the n-th MJPEG card, each
card should at least have a \-zrdev in addition to the \-zrcrop.
For examples, see the output of \-zrhelp and the Zr section of the
documentation.
.
.TP
.B \-zrdev <device> (\-vo zr only)
Specify the device special file that belongs to your MJPEG card, by default
the zr video output driver takes the first v4l device it can find.
.
.TP
.B \-zrfd (\-vo zr only)
Force decimation: Decimation, as specified by \-zrhdec and \-zrvdec, only
happens if the hardware scaler can stretch the image to its original size.
Use this option to force decimation.
.
.TP
.B \-zrhdec <1,2,4> (\-vo zr only)
Horizontal decimation: Ask the driver to send only every 2nd or 4th
line/\:pixel of the input image to the MJPEG card and use the scaler
of the MJPEG card to stretch the image to its original size.
.
.TP
.B \-zrhelp (\-vo zr only)
Display a list of all \-zr* options, their default values and a
cinerama mode example.
.
.TP
.B \-zrnorm <norm> (\-vo zr only)
Specify the TV norm as PAL or NTSC (default: no change).
.
.TP
.B \-zrquality <1\-20> (\-vo zr only)
A number from 1 (best) to 20 (worst) representing the JPEG encoding quality.
.
.TP
.B \-zrvdec <1,2,4> (\-vo zr only)
Vertical decimation: Ask the driver to send only every 2nd or 4th
line/\:pixel of the input image to the MJPEG card and use the scaler
of the MJPEG card to stretch the image to its original size.
.
.TP
.B \-zrxdoff <x display offset> (\-vo zr only)
If the movie is smaller than the TV screen, this option specifies the x
offset from the upper-left corner of the TV screen (default: centered).
.
.TP
.B \-zrydoff <y display offset> (\-vo zr only)
If the movie is smaller than the TV screen, this option specifies the y
offset from the upper-left corner of the TV screen (default: centered).
.
.
.
.SH "VIDEO OUTPUT DRIVERS (MPLAYER ONLY)"
Video output drivers are interfaces to different video output facilities.
The syntax is:
.
.TP
.B \-vo <driver1[:suboption1[=value]:...],driver2,...[,]>
Specify a priority list of video output drivers to be used.
.PP
If the list has a trailing ',' MPlayer will fall back on drivers not
contained in the list.
Suboptions are optional and can mostly be omitted.
.br
.I NOTE:
See \-vo help for a list of compiled-in video output drivers.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-vo xmga,xv,"
Try the Matrox X11 driver, then the Xv driver, then others.
.IPs "\-vo directx:noaccel"
Uses the DirectX driver with acceleration features turned off.
.RE
.PD 1
.sp 1
Available video output drivers are:
.
.TP
.B xv (X11 only)
Uses the XVideo extension of XFree86 4.x to enable hardware
accelerated playback.
If you cannot use a hardware specific driver, this is probably
the best option.
.PD 0
.RSs
.IPs port=<number>
Select a specific XVideo port.
.RE
.PD 1
.
.TP
.B x11 (X11 only)
Shared memory video output driver without hardware acceleration that
works whenever X11 is present.
.
.TP
.B xover (X11 only)
Adds X11 support to all overlay based video output drivers.
Currently only supported by tdfx_vid.
.PD 0
.RSs
.IPs <vo_driver>
Select the driver to use as source to overlay on top of X11.
.RE
.PD 1
.
.TP
.B xvmc (X11 with \-vc ffmpeg12mc only)
Video output driver that uses the XvMC (X Video Motion Compensation)
extension of XFree86 4.x to speed up MPEG1/\:2 and VCR2 decoding.
.PD 0
.RSs
.IPs benchmark
Disables image display.
Necessary for proper benchmarking of drivers that change
image buffers on monitor retrace only (nVidia).
.IPs queue
Queue frames for display to allow more parallel work of the video hardware.
May add a small (not noticeable) constant A/\:V desync.
.IPs sleep
Use sleep function while waiting for rendering to finish
(not recomended on Linux).
.IPs wait\
Do not use sleep function while waiting for rendering to finish
(default).
.RE
.PD 1
.
.TP
.B dga (X11 only)
Play video through the XFree86 Direct Graphics Access extension.
Considered obsolete.
.
.TP
.B sdl (also see \-forcexv, \-noxv) (SDL only)
Highly platform independent SDL (Simple Directmedia Layer) library
video output driver.
Since SDL uses its own X11 layer, MPlayer X11 options do not have
any effect on SDL.
.PD 0
.RSs
.IPs <driver>
Explicitly choose the SDL driver to use.
.RE
.PD 1
.
.TP
.B vidix\ \
VIDIX (VIDeo Interface for *niX) is an interface to the
video acceleration features of different graphics cards.
Very fast video output driver on cards that support it.
.PD 0
.RSs
.IPs <subdevice>
Explicitly choose the VIDIX subdevice driver to use.
Available subdevice drivers are cyberblade_vid, mach64_vid, mga_crtc2_vid,
mga_vid, nvidia_vid, pm3_vid, radeon_vid, rage128_vid and sis_vid.
.RE
.PD 1
.
.TP
.B xvidix (X11 only)
X11 frontend for VIDIX
.PD 0
.RSs
.IPs <subdevice>
same as vidix
.RE
.PD 1
.
.TP
.B cvidix\
Generic and platform independent VIDIX frontend, can even run in a
textconsole with nVidia cards.
.PD 0
.RSs
.IPs <subdevice>
same as vidix
.RE
.PD 1
.
.TP
.B winvidix (Windows only)
Windows frontend for VIDIX
.PD 0
.RSs
.IPs <subdevice>
same as vidix
.RE
.PD 1
.
.TP
.B directx (Windows only)
Video output driver that uses the DirectX interface.
.PD 0
.RSs
.IPs noaccel
Turns off hardware acceleration.
Try this option if you have display problems.
.RE
.PD 1
.
.TP
.B quartz (Mac OS X only)
Mac OS X Quartz video output driver.
Under some circumstances, it might be more efficient to force a
packed YUV output format, with e.g.\& \-vf format=yuy2.
.PD 0
.RSs
.IPs device_id=<number>
Choose the display device to use in fullscreen.
.RE
.PD 1
.
.TP
.B fbdev (Linux only)
Uses the kernel framebuffer to play video.
.PD 0
.RSs
.IPs <device>
Explicitly choose the fbdev device name to use (e.g.\& /dev/\:fb0) or the
name of the VIDIX subdevice if the device name starts with 'vidix'
(e.g.\& 'vidixsis_vid' for the sis driver).
.RE
.PD 1
.
.TP
.B fbdev2 (Linux only)
Uses the kernel framebuffer to play video,
alternative implementation.
.PD 0
.RSs
.IPs <device>
Explicitly choose the fbdev device name to use (default: /dev/\:fb0).
.RE
.PD 1
.
.TP
.B vesa\ \ \
Very general video output driver that should work on any VESA VBE 2.0
compatible card.
.PD 0
.RSs
.IPs dga\ \
Turns on DGA mode.
.IPs nodga
Turns off DGA mode.
.IPs neotv_pal
Activate the NeoMagic TV out and set it to PAL norm.
.IPs neotv_ntsc
Activate the NeoMagic TV out and set it to NTSC norm.
.IPs vidix
Use the VIDIX driver.
.IPs lvo:\ \ \
Activate the Linux Video Overlay on top of VESA mode.
.RE
.PD 1
.
.TP
.B svga\ \ \
Play video using the SVGA library.
.PD 0
.RSs
.IPs "<video mode>"
Specify video mode to use.
The mode can be given in a <width>x<height>x<colors> format,
e.g.\& 640x480x16M or be a graphics mode number, e.g.\& 84.
.IPs bbosd
Draw OSD into black bands below the movie (slower).
.IPs native
Use only native drawing functions.
This avoids direct rendering, OSD and hardware acceleration.
.IPs retrace
Force frame switch on vertical retrace.
Usable only with \-double.
It has the same effect as the \-vsync option.
.IPs sq\ \ \
Try to select a video mode with square pixels.
.IPs vidix
Use svga with VIDIX.
.RE
.PD 1
.
.TP
.B gl\ \ \ \ \
OpenGL video output driver.
Simple version, video size must be smaller than
the maximum texture size of your OpenGL implementation.
Intended to work even with the most simple OpenGL implementations.
.PD 0
.RSs
.IPs (no)manyfmts
Enables support for more (RGB and BGR) color formats.
Needs OpenGL version >= 1.2.
.IPs slice-height=<0\-...>
Number of lines copied to texture in one piece (default: 4).
0 for whole image.
.IPs (no)osd
Enable or disable support for OSD rendering via OpenGL (default: enabled).
Mostly for testing, you should use \-osdlevel 0 to disable OSD.
.IPs (no)scaled-osd
Changes the way the OSD behaves when the size of the
window changes (default: disabled).
When enabled behaves more like the other video output drivers,
which is better for fixed-size fonts.
Disabled looks much better with FreeType fonts and uses the
borders in fullscreen mode.
.IPs (no)aspect
Enable or disable aspect scaling and pan-and-scan support (default: enabled).
Disabling might increase speed.
.RE
.PD 1
.
.TP
.B gl2\ \ \ \
OpenGL video output driver, second generation.
Supports OSD and videos larger than the maximum texture size.
.
.TP
.B null\ \ \
Produces no video output.
Useful for benchmarking.
.
.TP
.B aa (also see \-aa*)
ASCII art video output driver that works on a text console.
.
.TP
.B caca\ \ \
Color ASCII art video output driver that works on a text console.
.
.TP
.B bl\ \ \ \ \
Video playback using the Blinkenlights UDP protocol.
This driver is highly hardware specific.
.PD 0
.RSs
.IPs <subdevice>
Explicitly choose the Blinkenlights subdevice driver to use.
It's something like arcade:host=localhost:2323 or
hdl:file=name1,file=name2.
You must specify a subdevice.
.RE
.PD 1
.
.TP
.B ggi\ \ \ \
GGI graphics system video output driver
.PD 0
.RSs
.IPs <driver>
Explicitly choose the GGI driver to use.
.RE
.PD 1
.
.TP
.B directfb
Play video using the DirectFB library.
.PD 0
.RSs
.IPs (no)input
Use the DirectFB instead of the MPlayer keyboard code (default: enabled).
.IPs buffermode=single|double|triple
Double and triple buffering give best results if you want to avoid tearing
issues.
Triple buffering is more efficent than double buffering as it doesn't block
MPlayer
while waiting for the vertical retrace.
Single buffering should be avoided (default: single).
.IPs fieldparity=top|bottom
Control the output order for interlaced frames (default: disabled).
Valid values are top = top fields first, bottom = bottom fields first.
This option doesn't have any effect on progressive film material
like most MPEG movies are.
You need to enable this option if you have tearing issues/\:unsmooth
motions watching interlaced film material.
.IPs layer=N
Will force layer with ID N for playback (default: -1 - auto).
.RE
.PD 1
.
.TP
.B dfbmga\
Matrox G400/\:G450/\:G550 specific video output driver that uses the
DirectFB library to make use of special hardware features.
Enables CRTC2 (second head), displaying video independently of the first head.
.PD 0
.RSs
.IPs (no)bes
Enable the use of the Matrox BES (backend scaler) (default: disabled).
Gives very good results concerning speed and output quality as interpolated
picture processing is done in hardware.
Works only on the primary head.
.IPs (no)spic
Make use of the Matrox sub picture layer to display the OSD (default: enabled).
.IPs (no)crtc2
Turn on TV-out on the second head (default: enabled).
The output quality is amazing as it's a full interlaced picture
with proper sync to every odd/\:even field.
.IPs (no)input
Use the DirectFB instead of the MPlayer keyboard code (default: disabled).
.IPs buffermode=single|double|triple
Double and triple buffering give best results if you want to avoid tearing
issues.
Triple buffering is more efficent than double buffering as it doesn't block
MPlayer
while waiting for the vertical retrace.
Single buffering should be avoided (default: triple).
.IPs fieldparity=top|bottom
Control the output order for interlaced frames (default: disabled).
Valid values are top = top fields first, bottom = bottom fields first.
This option doesn't have any effect on progressive film material
like most MPEG movies are.
You need to enable this option if you have tearing issues/\:unsmooth
motions watching interlaced film material.
.IPs tvnorm=pal|ntsc|auto
Will set the TV norm of the Matrox card without the need
for modifying /etc/\:directfbrc (default: disabled).
Valid norms are pal = PAL, ntsc = NTSC.
Special norm is auto (auto-adjust using PAL/\:NTSC) because it decides
which norm to use by looking at the framerate of the movie.
.RE
.PD 1
.
.TP
.B mga (Linux only)
Matrox specific video output driver that makes use of the YUV back
end scaler on Gxxx cards through a kernel module.
If you have a Matrox card, this is the fastest option.
.PD 0
.RSs
.IPs <device>
Explicitly choose the Matrox device name to use (default: /dev/\:mga_vid).
.RE
.PD 1
.
.TP
.B xmga (Linux, X11 only)
The mga video output driver, running in an X11 window.
.PD 0
.RSs
.IPs <device>
Explicitly choose the Matrox device name to use (default: /dev/\:mga_vid).
.RE
.PD 1
.
.TP
.B syncfb\
Video output driver for the SyncFB kernel module, which provides
special hardware features of Matrox Gxxx cards like hardware
deinterlacing, scaling and synchronizing your video output to
the vertical retrace of your monitor.
.
.TP
.B 3dfx (Linux only)
3Dfx specific video output driver.
This driver directly uses the 3Dfx hardware on top of X11.
Only 16 bpp are supported.
FIXME: It' ok the difference between 3dfx, tdfxfb and tdfx_vid?
.
.TP
.B tdfxfb (Linux only)
This driver employs the tdfx framebuffer driver to play movies with
YUV acceleration on 3Dfx cards.
FIXME: It' ok the difference between 3dfx, tdfxfb and tdfx_vid?
.PD 0
.RSs
.IPs <device>
Explicitly choose the fbdev device name to use (default: /dev/\:fb0).
.RE
.PD 1
.
.TP
.B tdfx_vid (Linux only)
3Dfx specific video output driver.
This driver directly uses the tdfx_vid kernel module.
FIXME: It' ok the difference between 3dfx, tdfxfb and tdfx_vid?
.PD 0
.RSs
.IPs <device>
Explicitly choose the device name to use (default: /dev/\:tdfx_vid).
.RE
.PD 1
.
.TP
.B dxr2 (also see \-dxr2) (DXR2 only)
Creative DXR2 specific video output driver.
.PD 0
.RSs
.IPs <vo_driver>
Output video subdriver to use as overlay (x11, xv).
.RE
.PD 1
.
.TP
.B dxr3 (DXR3 only)
Sigma Designs em8300 MPEG decoder chip (Creative DXR3, Sigma Designs
Hollywood Plus) specific video output driver.
Also see the lavc video filter.
.PD 0
.RSs
.IPs overlay
Activates the overlay instead of TVOut.
.IPs prebuf
Turns on prebuffering.
.IPs sync\
Will turn on the new sync-engine.
.IPs norm=<norm>
Specifies the TV norm.
.RSss
0: Does not change current norm (default).
.br
1: Auto-adjust using PAL/\:NTSC.
.br
2: Auto-adjust using PAL/\:PAL-60.
.br
3: PAL
.br
4: PAL-60
.br
5: NTSC
.REss
.IPs <0\-3>
Specifies the device number to use if you have more than one em8300 card.
.RE
.PD 1
.
.TP
.B mpegpes (DVB only)
Video output driver for DVB cards that writes the output to an MPEG-PES file
if no DVB card is installed.
.PD 0
.RSs
.IPs card=<1\-4>
Specifies the device number to use if you have more than one DVB output card
(V3 API only, such as 1.x.y series drivers).
.IPs <filename>
Allows specifying the output filename (default: ./grab.mpg).
.RE
.PD 1
.
.TP
.B zr (also see \-zr* and \-zrhelp)
Video output driver for a number of MJPEG capture/\:playback cards.
.
.TP
.B zr2 (also see the zrmjpeg video filter)
Video output driver for a number of MJPEG capture/\:playback cards,
second generation.
.PD 0
.RSs
.IPs dev=<device>
Specifies the device to use.
.IPs pal\ \
Activate PAL video norm.
.IPs secam
Activate SECAM video norm.
.IPs ntsc\
Activate NTSC video norm.
.IPs prebuf
Activate prebuffering, not yet supported.
.RE
.PD 1
.
.TP
.B md5sum\
Calculate MD5 sums of each frame and write them to a file.
Supports RGB24 and YV12 colorspaces.
Useful for debugging.
.PD 0
.RSs
.IPs outfile=<value>
Specify the output filename (default: ./md5sums).
.RE
.PD 1
.
.TP
.B yuv4mpeg
Transforms the video stream into a sequence of uncompressed YUV 4:2:0
images and stores it in a file called 'stream.yuv' in the current
directory.
The format is the same as the one employed by mjpegtools, so this is
useful if you want to process the video with the mjpegtools suite.
It supports the YV12, RGB (24 bpp) and BGR (24 bpp) format.
.PD 0
.RSs
.IPs interlaced
Write the output as interlaced frames, top field first.
.IPs interlaced_bf
Write the output as interlaced frames, bottom field first.
.REss
.PD 1
.RS
.sp 1
.I NOTE:
If you don't specify any option the output is progressive
(i.e.\& not interlaced).
.RE
.
.TP
.B gif89a\
Output each frame into a single animated GIF file in the current directory.
It supports only RGB format with 24 bpp and the output is converted to 256
colors.
.PD 0
.RSs
.IPs <fps>
Float value to specify framerate (default: 5.0).
.IPs <filename>
Specify the output filename (default: ./out.gif).
.REss
.PD 1
.RS
.sp 1
.I NOTE:
You must specify the framerate before the filename or the framerate will
be part of the filename.
.sp 1
.I EXAMPLE:
.RE
.PD 0
.RSs
mplayer video.nut \-vo gif89a:15.0:test.gif
.RE
.PD 1
.
.TP
.B jpeg\ \ \
Output each frame into a JPEG file in the current directory.
Each file takes the frame number padded with leading zeros as name.
.PD 0
.RSs
.IPs [no]progressive
Specify standard or progressive JPEG (default: noprogressive).
.IPs [no]baseline
Specify use of baseline or not (default: baseline).
.IPs optimize=<0\-100>
optimization factor (default: 100)
.IPs smooth=<0\-100>
smooth factor (default: 0)
.IPs quality=<0\-100>
quality factor (default: 75)
.IPs outdir=<dirname>
Specify the directory to save the JPEG files to (default: ./).
.IPs subdirs=<prefix>
Create numbered subdirectories with the specified prefix to
save the files in instead of the current directory.
.IPs maxfiles=<value> (subdirs only)
Maximum number of files to be saved per subdirectory.
Must be equal to or larger than 1 (default: 1000).
.RE
.PD 1
.
.TP
.B pnm\ \ \ \
Output each frame into a PNM file in the current directory.
Each file takes the frame number padded with leading zeros as name.
It supports PPM, PGM and PGMYUV files in both raw and ASCII mode.
Also see pnm(5), ppm(5) and pgm(5).
.PD 0
.RSs
.IPs ppm
Write PPM files (default).
.IPs pgm
Write PGM files.
.IPs pgmyuv
Write PGMYUV files.
PGMYUV is like PGM, but it also contains the U and V plane, appended at the
bottom of the picture.
.IPs raw
Write PNM files in raw mode (default).
.IPs ascii
Write PNM files in ASCII mode.
.IPs outdir=<dirname>
Specify the directory to save the PNM files to (default: ./).
.IPs subdirs=<prefix>
Create numbered subdirectories with the specified prefix to
save the files in instead of the current directory.
.IPs maxfiles=<value> (subdirs only)
Maximum number of files to be saved per subdirectory.
Must be equal to or larger than 1 (default: 1000).
.RE
.PD 1
.
.TP
.B png (also see \-z)
Output each frame into a PNG file in the current directory.
Each file takes the frame number padded with leading zeros as name.
24bpp RGB and BGR formats are supported.
.
.TP
.B tga\ \ \ \
Output each frame into a Targa file in the current directory.
Each file takes the frame number padded with leading zeros as name.
The purpose of this video output driver is to have a simple lossless
image writer to use without any external library.
It supports the BGR[A] color format, with 15, 24 and 32 bpp.
You can force a particular format with the format video filter.
.sp 1
.I EXAMPLE:
.RE
.PD 0
.RSs
mplayer video.nut \-vf format=bgr15 \-vo tga
.RE
.PD 1
.
.
.
.SH "DECODING/\:FILTERING OPTIONS"
.
.TP
.B \-ac <[-]codec1,[-]codec2,...[,]>
Specify a priority list of audio codecs to be used, according to their codec
name in codecs.conf.
Use a '-' before the codec name to omit it.
If the list has a trailing ',' MPlayer will fall back on codecs not
contained in the list.
.br
.I NOTE:
See \-ac help for a full list of available codecs.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-ac mp3acm"
Force the l3codeca.acm MP3 codec.
.IPs "\-ac mad,"
Try libmad first, then fall back on others.
.IPs "\-ac hwac3,a52,"
Try hardware AC3 passthrough, software AC3, then others.
.IPs "\-ac -ffmp3,"
Skip FFmpeg's MP3 decoder.
.RE
.PD 1
.
.TP
.B \-af <filter1[=parameter1:parameter2:...],filter2,...>
Activate a comma separated list of audio filters and their options.
Also see the audio filters section of the documentation.
.br
.I NOTE:
To get a full list of available audio filters, see \-af help.
.sp 1
Available filters are:
.RSs
.IPs resample[=srate[:sloppy][:type]]
Changes the sample rate of the audio stream to an integer srate in Hz.
It only supports the 16-bit little-endian format.
With MEncoder, you need to also use \-srate <srate>.
.IPs channels[=nch]
Change the number of channels to nch output channels.
If the number of output channels is bigger than the number of input channels
empty channels are inserted (except when mixing from mono to stereo, then
the mono channel is repeated in both of the output channels).
If the number of output channels is smaller than the number of input channels
the exceeding channels are truncated.
.IPs format[=bps:f]
Select the bytes per sample and the format used for output from the
filter layer.
The option bps is an integer and denotes Bytes per sample.
The format f is a string containing a concatenated mix of:
.br
alaw, mulaw or imaadpcm
.br
float or int
.br
unsigned or signed
.br
le or be (little- or big-endian)
.br
.IPs volume[=v:sc]
Select the output volume level.
This filter is not reentrant and can therefore only be enabled once for every
audio stream.
.RSss
v: Sets the desired gain in dB for all channels in the stream
from -200dB to +60dB (where -200dB mutes the sound
completely and +60dB equals a gain of 1000).
.br
sc: Enable soft clipping.
.REss
.IPs pan[=n:l01:l02:...l10:l11:l12:...ln0:ln1:ln2:...]
Mixes channels arbitrarily, see DOCS/\:HTML/\:en/\:audio.html for
details.
.RSss
n: number of input channels (1\-6)
.br
lij: How much of input channel j is mixed into output channel i.
.REss
.IPs sub[=fc:ch]
Add subwoofer channel.
.RSss
fc: cutoff frequency for low-pass filter (20Hz to 300Hz) (default: 60Hz)
.br
ch: channel number for the sub-channel
.REss
.IPs surround[=d]
Decoder for matrix encoded surround sound, works on many 2 channel files.
.RSss
d: delay time in ms for the rear speakers (0ms to 1000ms) (default: 15ms)
.REss
.IPs delay[=ch1:ch2:...]
Delays the sound output.
Specify the delay separately for each channel in milliseconds (floating point
number between 0 and 1000).
.IPs export[=mmapped_file[:nsamples]]
Exports the incoming signal to other processes using memory mapping (mmap()).
.RSss
mmapped_file: file to map data to (default: ~/.mplayer/\:mplayer-af_export)
.br
nsamples: number of samples per channel (default: 512)
.REss
.IPs extrastereo[=mul]
Increases the difference between left and right channels to add some
sort of "live" effect to playback.
.RSss
mul: difference coefficient (default: 2.5)
.REss
.IPs volnorm
Maximizes the volume without distorting the sound.
.RE
.
.TP
.B \-af-adv <force=(0\-3):list=(filters)> (also see \-af)
Specify advanced audio filter options:
.RSs
.IPs force=<0\-3>
Forces the insertion of audio filters to one of the following:
.RSss
0: completely automatic filter insertion (default)
.br
1: Optimize for accuracy.
.br
2: Optimize for speed.
.br
3: Turn off automatic filter insertion.
.REss
.IPs list=<filters>
Same as \-af.
.RE
.
.TP
.B \-afm <driver1,driver2,...>
Specify a priority list of audio codec families to be used, according
to their codec name in codecs.conf.
Falls back on the default codecs if none of the given codec families work.
.br
.I NOTE:
See \-afm help for a full list of available codec families.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-afm ffmpeg"
Try FFmpeg's libavcodec codecs first.
.IPs "\-afm acm,dshow"
Try Win32 codecs first.
.RE
.PD 1
.
.TP
.B \-aspect <ratio>
Override movie aspect ratio.
It is autodetected for MPEG files, but it cannot be done for most AVI files.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
\-aspect 4:3  or \-aspect 1.3333
.br
\-aspect 16:9 or \-aspect 1.7777
.RE
.PD 1
.
.TP
.B \-noaspect
Disable automatic movie aspect ratio compensation.
.
.TP
.B \-flip \
Flip image upside-down.
.
.TP
.B \-lavdopts <option1:option2:...> (DEBUG CODE)
Specify libavcodec decoding parameters.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
\-lavdopts bug=1
.RE
.PD 1
.sp 1
.RS
Available options are:
.RE
.RSs
.IPs bug=<value>
Manually work around encoder bugs:
.RSss
0: nothing
.br
1: autodetect bugs (default)
.br
2 (msmpeg4v3): some old lavc generated msmpeg4v3 files (no autodetection)
.br
4 (mpeg4): XviD interlacing bug (autodetected if fourcc==XVIX)
.br
8 (mpeg4): UMP4 (autodetected if fourcc==UMP4)
.br
16 (mpeg4): padding bug (autodetected)
.br
32 (mpeg4): illegal vlc bug (autodetected per fourcc)
.br
64 (mpeg4): XviD and DivX qpel bug (autodetected per fourcc/\:version)
.br
128 (mpeg4): old standard qpel (autodetected per fourcc/\:version)
.br
256 (mpeg4): another qpel bug (autodetected per fourcc/\:version)
.br
512 (mpeg4): direct-qpel-blocksize bug (autodetected per fourcc/\:version)
.br
1024 (mpeg4): edge padding bug (autodetected per fourcc/\:version)
.REss
.IPs debug=<value>
debug:
.RSss
.br
0: disabled
.br
1: picture info
.br
2: rate control
.br
4: bitstream
.br
8: macroblock (MB) type
.br
16: quantization parameter (QP)
.br
32: motion vector
.br
0x0040: motion vector visualization (use \-noslices)
.br
0x0080: macroblock (MB) skip
.br
0x0100: startcode
.br
0x0200: PTS
.br
0x0400: error resilience
.br
0x0800: memory management control operations (H.264)
.br
0x1000: bugs
.REss
.IPs ec=<value>
error concealment:
.RSss
1: Use strong deblock filter for damaged MBs.
.br
2: iterative motion vector (MV) search (slow)
.br
3: all (default)
.REss
.IPs er=<value>
error resilience:
.RSss
.br
0: disabled
.br
1: careful (Should work with broken encoders.)
.br
2: normal (default) (Works with compliant encoders.)
.br
3: aggressive (More checks, but might cause problems even for valid bitstreams.)
.br
4: very aggressive
.REss
.IPs fast\
Enable optimizations which do not comply to the specification and might
potentially cause problems, like simpler dequantization, assuming use
of the default quantization matrix, assuming YUV 4:2:0 and skipping a few
checks to detect damaged bitstreams.
.IPs gray\
grayscale only decoding (a bit faster than with color)
.IPs "idct=<0\-99> (see \-lavcopts)"
For best decoding quality use the same IDCT algorithm for decoding and encoding.
This may come at a price in accuracy, though.
.IPs lowres=<number>
Decode at lower resolutions.
Low resolution decoding is not supported by all codecs, and it will
often result in ugly artifacts.
This is not a bug, but a side effect of not decoding at full resolution.
.RSss
.br
0: disabled
.br
1: 1/2 resolution
.br
2: 1/4 resolution
.br
3: 1/8 resolution
.REss
.IPs "sb=<number> (MPEG2 only)"
Skip the given number of macroblock rows at the bottom.
.IPs "st=<number> (MPEG2 only)"
Skip the given number of macroblock rows at the top.
.IPs vismv=<value>
vismv:
.RSss
.br
0: disabled
.br
1: Visualize forward predicted MVs of P-frames.
.br
2: Visualize forward predicted MVs of B-frames.
.br
4: Visualize backward predicted MVs of B-frames.
.REss
.IPs vstats
Prints some statistics and stores them in ./vstats_*.log.
.RE
.
.TP
.B \-noslices
Disable drawing video by 16-pixel height slices/\:bands, instead draws the
whole frame in a single run.
May be faster or slower, depending on card/\:cache.
It has effect only with libmpeg2 and libavcodec codecs.
.
.TP
.B \-nosound
Do not play/\:encode sound.
Useful for benchmarking.
.
.TP
.B \-novideo
Do not play/\:encode video.
.
.TP
.B \-oldpp <quality> (OpenDivX only) (OBSOLETE)
Use the opendivx postprocessing code instead of the internal one.
Superseded by \-pp, the internal postprocessing offers better
quality and performance.
The valid range of \-oldpp values varies by codec, it is mostly
0\-6, where 0=disable, 6=slowest/\:best.
.
.TP
.B \-pp <quality> (also see \-vf pp)
Set the DLL postprocess level.
This option is no longer usable with \-vf pp.
It only works with Win32 DirectShow DLLs with internal postprocessing routines.
The valid range of \-pp values varies by codec, it is mostly
0\-6, where 0=disable, 6=slowest/\:best.
.
.TP
.B \-pphelp (also see \-vf pp)
Show a summary about the available postprocess filters and their usage.
.
.TP
.B \-ssf <mode>
Specifies software scaler parameters.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
\-vf scale \-ssf lgb=3.0
.RE
.PD 1
.PD 0
.RSs
.IPs lgb=<0\-100>
gaussian blur filter (luma)
.IPs cgb=<0\-100>
gaussian blur filter (chroma)
.IPs ls=<0\-100>
sharpen filter (luma)
.IPs cs=<0\-100>
sharpen filter (chroma)
.IPs chs=<h>
chroma horizontal shifting
.IPs cvs=<v>
chroma vertical shifting
.RE
.PD 1
.
.TP
.B \-stereo <mode>
Select type of MP2/\:MP3 stereo output.
.PD 0
.RSs
.IPs 0
stereo
.IPs 1
left channel
.IPs 2
right channel
.RE
.PD 1
.
.TP
.B \-sws <software\ scaler\ type> (also see \-vf scale and \-zoom)
Specify the software scaler algorithm to be used with the \-zoom option.
This affects video output drivers which lack hardware acceleration, e.g.\& x11.
.sp 1
Available types are:
.sp 1
.PD 0
.RSs
.IPs 0
fast bilinear
.IPs 1
bilinear
.IPs 2
bicubic (good quality) (default)
.IPs 3
experimental
.IPs 4
nearest neighbour (bad quality)
.IPs 5
area
.IPs 6
luma bicubic / chroma bilinear
.IPs 7
gauss
.IPs 8
sincR
.IPs 9
lanczos
.IPs 10
natural bicubic spline
.RE
.PD 1
.sp 1
.RS
.I NOTE:
For \-sws\ 2 and 7, sharpness can be set with the scaling parameter
of \-vf scale (0 (soft) \- 100 (sharp)), for \-sws 9, the scaling
parameter specifies the filter length (1 \- 10).
.RE
.
.TP
.B \-vc <[-]codec1,[-]codec2,...[,]>
Specify a priority list of video codecs to be used, according to their codec
name in codecs.conf.
Use a '-' before the codec name to omit it.
If the list has a trailing ',' MPlayer will fall back on codecs not
contained in the list.
.br
.I NOTE:
See \-vc help for a full list of available codecs.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-vc divx"
Force Win32/\:VFW DivX codec, no fallback.
.IPs "\-vc divx4,"
Try divx4linux codec first, then fall back on others.
.IPs "\-vc -divxds,-divx,"
Skip Win32 DivX codecs.
.IPs "\-vc ffmpeg12,mpeg12,"
Try libavcodec's MPEG1/\:2 codec, then libmpeg2, then others.
.RE
.PD 1
.
.TP
.B \-vfm <driver1,driver2,...>
Specify a priority list of video codec families to be used, according
to their names in codecs.conf.
Falls back on the default codecs if none of the given codec families work.
.br
.I NOTE:
See \-vfm help for a full list of available codec families.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-vfm ffmpeg,dshow,vfw"
Try the libavcodec, then Directshow, then VfW codecs and fall back
on others, if they do not work.
.IPs "\-vfm xanim"
Try XAnim codecs first.
.RE
.PD 1
.
.TP
.B \-x <x> (MPlayer only)
Scale image to width <x> (if software/\:hardware scaling is available).
Disables aspect calculations.
.
.TP
.B \-xvidopts <option1:option2:...>
Specify additional parameters when decoding with XviD.
.br
.I NOTE:
Since libavcodec is faster than XviD you might want to use the libavcodec
postprocessing filter (\-vf pp) and decoder (\-vfm ffmpeg) instead.
.sp 1
XviD's internal postprocessing filters:
.PD 0
.RSs
.IPs deblock-chroma (also see \-vf pp)
chroma deblock filter
.IPs deblock-luma (also see \-vf pp)
luma deblock filter
.IPs dering-luma (also see \-vf pp)
luma deringing filter
.IPs dering-chroma (also see \-vf pp)
chroma deringing filter
.IPs filmeffect (also see \-vf noise)
Adds artificial film grain to the video.
May increase perceived quality, while lowering true quality.
.RE
.sp 1
.RS
rendering methods:
.RE
.PD 0
.RSs
.IPs dr2\ \
Activate direct rendering method 2.
.IPs nodr2
Deactivate direct rendering method 2.
.RE
.PD 1
.
.TP
.B \-xy <value>
.PD 0
.RSs
.IPs value<=8
Scale image by factor <value>.
.IPs value>8
Set width to value and calculate height to keep correct aspect ratio.
.RE
.PD 1
.
.TP
.B \-y <y> (MPlayer only)
Scale image to height <y> (if software/\:hardware scaling is available).
Disables aspect calculations.
.
.TP
.B \-zoom\ \
Allow software scaling, where available.
Can be used to force scaling with \-vf scale.
.br
.I NOTE:
\-vf scale will ignore \-x / \-y / \-xy / \-fs / \-aspect without
\-zoom.
.
.
.
.SH "VIDEO FILTERS"
Video filters allow you to modify the video stream and its properties.
The syntax is:
.
.TP
.B \-vf <filter1[=parameter1:parameter2:...],filter2,...>
Setup a chain of video filters.
.
.TP
.B \-vop <...,filter2[=parameter1:parameter2:...],filter1> (OBSOLETE)
Setup a chain of video filters, to be applied in
.B reverse
order.
Deprecated in favor of \-vf.
.PP
Many parameters are optional and set to default values if omitted.
To explicitly use a default value set a parameter to '-1'.
Parameters w:h means width x height in pixels, x:y means x;y position counted
from the upper left corner of the bigger image.
.br
.I NOTE:
To get a full list of available video filters, see \-vf help.
.sp 1
Filters are managed in lists.
There are a few commands to manage the filter list.
.
.TP
.B \-vf-add <filter1[,filter2,...]>
Appends the filters given as arguments to the filter list.
.
.TP
.B \-vf-pre <filter1[,filter2,...]>
Prepends the filters given as arguments to the filter list.
.
.TP
.B \-vf-del <index1[,index2,...]>
Deletes the filters at the given indexes.
Index numbers start at 0, negative numbers address the end of the
list (-1 is the last).
.
.TP
.B \-vf-clr
Completely empties the filter list.
.PP
With filters that support it, you can access parameters by their name.
.
.TP
.B \-vf <filter>=help
Prints the parameter names and parameter value ranges for a particular
filter.
.
.TP
.B \-vf <filter=named_parameter1=value1[:named_parameter2=value2:...]>
Sets a named parameter to the given value.
Use on and off or yes and no to set flag parameters.
.PP
Available filters are:
.
.TP
.B crop[=w:h:x:y]
Crops the given part of the image and discards the rest.
Useful to remove black bands from widescreen movies.
.PD 0
.RSs
.IPs w,h
Cropped width and height, defaults to original width and height.
.IPs x,y
Position of the cropped picture, defaults to center.
.RE
.PD 1
.
.TP
.B cropdetect[=limit:round]
Calculates necessary cropping parameters and prints the recommended parameters
to stdout.
.PD 0
.RSs
.IPs limit
Threshold, which can be optionally specified from nothing (0) to
everything (255) (default: 24).
.br
.IPs round
Value which the width/\:height should be divisible by (default: 16).
The offset is automatically adjusted to center the video.
Use 2 to get only even dimensions (needed for 4:2:2 video).
16 is best when encoding to most video codecs.
.RE
.PD 1
.
.TP
.B rectangle[=w:h:x:y]
The plugin responds to the input.conf directive 'change_rectangle'
that takes two parameters.
.PD 0
.RSs
.IPs w,h
width and height (default: -1, maximum possible width where boundaries
are still visible.)
.IPs x,y
top left corner position (default: -1, uppermost leftmost)
.RE
.PD 1
.
.TP
.B expand[=w:h:x:y:o]
Expands (not scales) movie resolution to the given value and places the
unscaled original at coordinates x, y.
Can be used for placing subtitles/\:OSD in the resulting black bands.
.RSs
.IPs w,h
Expanded width,height (default: original width,height).
Negative values for w and h are treated as offsets to the original size.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IP expand=0:-50:0:0
Adds a 50 pixel border to the bottom of the picture.
.RE
.PD 1
.IPs x,y
position of original image on the expanded image (default: center)
.IPs o
OSD/\:subtitle rendering
.RSss
0: disable (default)
.br
1: enable
.REss
.RE
.
.TP
.B flip (also see \-flip)
Flips the image upside down.
.
.TP
.B mirror\
Mirrors the image on the Y axis.
.
.TP
.B rotate[=<0\-7>]
Rotates and flips (optional) the image +/\:- 90 degrees.
For parameters between 4\-7 rotation is only done if the movie's geometry is
portrait and not landscape.
.
.TP
.B scale[=w:h[:interlaced[:chr_drop[:param[:param2[:presize]]]]]]
Scales the image with the software scaler (slow) and performs a YUV<\->RGB
colorspace conversion (also see \-sws).
.RSs
.IPs <w>,<h>
scaled width/\:height (default: original width/\:height)
.br
.I NOTE:
If \-zoom is used, and underlying filters (including libvo) are
incapable of scaling, it defaults to d_width/\:d_height!
.RSss
 0:   scaled d_width/\:d_height
.br
-1:   original width/\:height
.br
-2:   Calculate w/\:h using the other dimension and the prescaled aspect ratio.
.br
-3:   Calculate w/\:h using the other dimension and the original aspect ratio.
.REss
.IPs <interlaced>
Toggle interlaced scaling.
.RSss
0: off (default)
.br
1: on
.REss
.IPs <chr_drop>
chroma skipping
.RSss
0: Use all available input lines for chroma.
.br
1: Use only every 2. input line for chroma.
.br
2: Use only every 4. input line for chroma.
.br
3: Use only every 8. input line for chroma.
.REss
.IPs "<param>[:<param2>] (also see \-sws)"
Set some scaling parameters depending on the type of scaler selected
with \-sws.
.RSss
\-sws 2 (bicubic):  B (blurring) and C (ringing)
.br
0.00:0.60 default
.br
0.00:0.75 VirtualDubs "precise bicubic"
.br
0.00:0.50 Catmull-Rom spline
.br
0.33:0.33 Mitchell-Netravali spline
.br
1.00:0.00 cubic B-spline
.br
\-sws 7 (gaussian): sharpness (0 (soft) \- 100 (sharp))
.br
\-sws 9 (lanczos):  filter length (1\-10)
.REss
.IPs <presize>
Scale to preset sizes.
.RSss
qntsc:   352x240 (NTSC quarter screen)
.br
qpal:    352x288 (PAL quarter screen)
.br
ntsc:    720x480 (standard NTSC)
.br
pal:     720x576 (standard PAL)
.br
sntsc:   640x480 (square pixel NTSC)
.br
spal:    768x576 (square pixel PAL)
.REss
.RE
.
.TP
.B dsize=[aspect|w:h]
Changes the intended display size/\:aspect at an arbitrary point in the
filter chain.
Aspect can be given as a fraction (4/\:3) or floating point number
(1.33).
Alternatively, you may specify the exact display width and height
desired.
Note that this filter does NOT do any scaling itself; it just affects
what later scalers (software or hardware) will do when auto-scaling to
correct aspect.
.
.TP
.B yuy2\ \ \
Forces software YV12/\:I420/\:422P to YUY2 conversion.
Useful for video cards/\:drivers with slow YV12 but fast YUY2 support.
.
.TP
.B yvu9\ \ \
Forces software YVU9 to YV12 colorspace conversion.
Deprecated in favor of the software scaler.
.
.TP
.B yuvcsp\
Clamps YUV color values to the CCIR 601 range without doing real conversion.
.
.TP
.B rgb2bgr[=swap]
RGB 24/\:32 <\-> BGR 24/\:32 colorspace conversion.
.PD 0
.RSs
.IPs swap\
Also perform  R <\-> B swapping.
.RE
.PD 1
.
.TP
.B palette
RGB/\:BGR 8 \-> 15/\:16/\:24/\:32bpp colorspace conversion using palette.
.
.TP
.B format[=fourcc]
Restricts the colorspace for the next filter without doing any conversion.
Use together with the scale filter for a real conversion.
.br
.I NOTE:
For a list of available formats see format=fmt=help.
.PD 0
.RSs
.IPs fourcc
format name like rgb15, bgr24, yv12, etc (default: yuy2)
.RE
.PD 1
.
.TP
.B noformat[=fourcc]
Restricts the colorspace for the next filter without doing any conversion.
Unlike the format filter, this will allow any colorspace
.B except
the one you specify.
.br
.I NOTE:
For a list of available formats see noformat=fmt=help.
.PD 0
.RSs
.IPs fourcc
format name like rgb15, bgr24, yv12, etc (default: yv12)
.RE
.PD 1
.
.TP
.B pp[=filter1[:option1[:option2...]]/\:[-]filter2...] (also see \-pphelp)
Enables the specified chain of postprocessing subfilters.
Subfilters must be separated by '/' and can be disabled by
prepending a '\-'.
A subfilter's scope can be determined by appending a ':' followed
by 'a', 'c' or 'y' (default: c):
.PD 0
.RSs
.IPs a
Automatically switch the subfilter off if the CPU is too slow.
.IPs c
Do chrominance filtering, too.
.IPs y
Do luminance filtering only (no chrominance).
.RE
.PD 1
.sp 1
.RS
.br
.I NOTE:
\-pphelp shows a list of available subfilters.
.sp 1
.I EXAMPLE:
.RE
.PD 0
.RSs
.IPs "\-vf pp=hb/vb/dr/al"
horizontal and vertical deblocking, deringing and automatic
brightness/\:contrast
.IPs "\-vf pp=hb/vb/dr/al/lb"
horizontal and vertical deblocking, deringing, automatic
brightness/\:contrast and linear blend deinterlacer
.IPs "\-vf pp=de/-al"
default filters without brightness/\:contrast correction
.IPs "\-vf pp=de/tn:1:2:3"
Enable default filters & temporal denoiser.
.IPs "\-vf pp=hb:y/vb:a"
Horizontal deblocking on luminance only, and switch vertical deblocking
on or off automatically depending on available CPU time.
.RE
.PD 1
.
.TP
.B spp[=quality[:qp[:mode]]]
simple postprocessing filter
.RSs
.IPs quality
0\-6 (default: 3)
.IPs qp\ \ \
Force quantization parameter (default: 0, use QP from video).
.IPs mode\ \ \
0: hard thresholding (default)
.br
1: soft thresholding (better deringing, but blurrier)
.RE
.
.TP
.B qp=equation
quantization parameter (QP) change filter
.RSs
.IPs equation
some equation like "2+2*sin(PI*qp)"
.RE
.
.TP
.B test\ \ \
Generate various test patterns.
.
.TP
.B rgbtest
Generate an RGB test pattern useful for detecting RGB vs BGR issues.
You should see a red, green and blue stripe from top to bottom.
.
.TP
.B lavc[=quality:fps]
Fast software YV12 to MPEG1 conversion with libavcodec for use with DVB/\:DXR3.
Faster and of better quality than \-vf fame.
.RSs
.IPs quality
.RSss
1\-31: fixed qscale
.br
32\-:  fixed bitrate in kBits
.REss
.IPs fps\ \
force output fps (float value) (default: 0, autodetect based on height)
.RE
.
.TP
.B fame\ \ \
Fast software YV12 to MPEG1 conversion with libfame for use with DVB/\:DXR3.
.
.TP
.B dvbscale[=aspect]
Set up optimal scaling for DVB cards, scaling the x axis in hardware and
calculating the y axis scaling in software to keep aspect.
Only useful together with expand and scale.
.RSs
.IPs aspect
Control aspect ratio, calculate as DVB_HEIGHT*ASPECTRATIO (default:
576*4/\:3=768), set it to 576*(16/\:9)=1024 for a 16:9 TV.
.RE
.sp 1
.RS
.I EXAMPLE:
.RE
.PD 0
.RSs
.IPs "\-vf dvbscale,scale=-1:0,expand=-1:576:-1:-1:1,lavc"
FIXME: Explain what this does.
.RE
.PD 1
.
.TP
.B noise[=luma[u][t|a][h][p]:chroma[u][t|a][h][p]]
Adds noise.
.PD 0
.RSs
.IPs <0\-100>
luma noise
.IPs <0\-100>
chroma noise
.IPs u
uniform noise (gaussian otherwise)
.IPs t
temporal noise (noise pattern changes between frames)
.IPs a
averaged temporal noise (smoother, but a lot slower)
.IPs h
high quality (slightly better looking, slightly slower)
.IPs p
mix random noise with a (semi)regular pattern
.RE
.PD 1
.
.TP
.B denoise3d[=luma:chroma:time]
This filter aims to reduce image noise producing smooth images and making still
images really still (This should enhance compressibility.).
.PD 0
.RSs
.IPs luma\
spatial luma strength (default: 4)
.IPs chroma
spatial chroma strength (default: 3)
.IPs time\
temporal strength (default: 6)
.RE
.PD 1
.
.TP
.B hqdn3d[=luma:chroma:time]
High precision/\:quality version of the denoise3d filter.
Parameters and usage are the same.
.
.TP
.B eq[=brightness:contrast] (OBSOLETE)
Software equalizer with interactive controls just like the hardware
equalizer, for cards/\:drivers that do not support brightness and
contrast controls in hardware.
Initial values in the range -100 \- 100 may be given on the command line.
Might also be useful with MEncoder, either for fixing poorly captured
movies, or for slightly reducing contrast to mask artifacts and get by
with lower bitrates.
.
.TP
.B eq2[=gamma:contrast:brightness:saturation:rg:gg:bg:weight]
Alternative software equalizer that uses lookup tables (very slow),
allowing gamma correction in addition to simple brightness
and contrast adjustment.
Note that it uses the same MMX optimized code as \-vf eq if all
gamma values are 1.0.
The parameters are given as floating point values.
Parameters rg, gg, bg are the independent gamma values for the red, green
and blue components.
The weight parameter can be used to reduce the effect of a high gamma value on
bright image areas, e.g.\& keep them from getting overamplified and just plain
white.
A value of 0.0 turns the gamma correction all the way down while 1.0 leaves it
at its full strength.
Defaults are gamma=1.0, contrast=1.0, brightness=0.0, saturation=1.0,
weight=1.0.
Value ranges are 0.1\-10 for gamma, -2\-2 for contrast (negative values result
in a negative image), -1\-1 for brightness, 0\-3 for saturation and 0\-1 for
weight.
.
.TP
.B hue[=hue:saturation]
Defaults are hue=0.0, saturation=1.0.
Value ranges are -180\-180 for hue, -2\-2 for saturation (negative values result
in a negative chroma).
.
.TP
.B halfpack[=f]
Convert planar YUV 4:2:0 to half-height packed 4:2:2, downsampling luma but
keeping all chroma samples.
Useful for output to low-resolution display devices when hardware downscaling
is poor quality or is not available.
Can also be used as a primitive luma-only deinterlacer with very low CPU
usage.
By default, halfpack averages pairs of lines when downsampling.
The optional parameter f can be 0 to only use even lines, or 1 to only use
odd lines.
Any other value for f gives the default (averaging) behavior.
.
.TP
.B ilpack[=mode]
When interlaced video is stored in YUV 4:2:0 formats, chroma
interlacing does not line up properly due to vertical downsampling of
the chroma channels.
This filter packs the planar 4:2:0 data into YUY2 (4:2:2) format with
the chroma lines in their proper locations, so that in any given
scanline, the luma and chroma data both come from the same field.
The optional argument selects the sampling mode.
By default, linear interpolation (mode 1) is used.
Mode 0 uses nearest-neighbor sampling, which is fast but incorrect.
.
.TP
.B harddup
Only useful with MEncoder.
If harddup is used when encoding, it will force duplicate frames to be
encoded in the output.
This uses slightly more space, but is necessary for output to MPEG
files or if you plan to demux and remux the video stream after
encoding.
Should be placed at or near the end of the filter chain unless you
have a good reason to do otherwise.
.
.TP
.B softskip
Only useful with MEncoder.
Softskip moves the frame skipping (dropping) step of encoding from
before the filter chain to some point during the filter chain.
This allows filters which need to see all frames (inverse telecine,
temporal denoising, etc.) to function properly.
Should be placed after the filters which need to see all frames and
before any subsequent filters that are CPU-intensive.
.
.TP
.B decimate[=max:hi:lo:frac]
Drops frames that do not differ greatly from the previous frame in
order to reduce framerate.
The argument max (if positive) sets the maximum number of consecutive
frames which can be dropped, or (if negative) the minimum interval
between dropped frames.
A frame is a candidate for dropping if no 8x8 region differs by more
than a threshold of hi, and if not more than frac portion (1 meaning
the whole image) differs by more than a threshold of lo.
Values of hi and lo are for 8x8 pixel blocks and represent actual
pixel value differences, so a threshold of 64 corresponds to 1 unit of
difference for each pixel, or the same spread out differently over the
block.
The main use of this filter is for very-low-bitrate encoding (e.g.\&
streaming over dialup modem), but it could in theory be used for
fixing movies that were inverse-telecined incorrectly.
.
.TP
.B dint[=sense:level]
Detects and drops the first from a set of interlaced video frames.
Values can be from 0.0 to 1.0 \- first (default 0.1) is relative difference
between neighbor pixels, second (default 0.15) is what part of image has to
be detected as interlaced to drop the frame.
.
.TP
.B lavcdeint
libavcodec deinterlacing filter
.
.TP
.B kerndeint[=thresh[:map[:order[:sharp[:twoway]]]]]
Donald Graft's adaptive kernel deinterlacer.
Deinterlaces parts of a video if a configurable threshold is exceeded.
.PD 0
.RSs
.IPs "thresh (0 \- 255)"
Threshold (default 10).
.IPs "map (0 or 1)"
Paint pixels which exceed the threshold white (default: 0).
.IPs "order (0 or 1)"
Swap fields if 1 (default: 0).
.IPs "sharp (0 or 1)"
Enable additional sharpening (default: 0).
.IPs "twoway (0 or 1)"
Enable twoway sharpening (default: 0).
.RE
.PD 1
.
.TP
.B unsharp=l|cWxH:amount[:l|cWxH:amount]
unsharp mask / gaussian blur
.RSs
.IPs l\ \ \ \
Apply effect on luma component.
.IPs c\ \ \ \
Apply effect on chroma components.
.IPs <width>x<height>
width and height of the matrix, odd sized in both directions
(min = 3x3, max = 13x11 or 11x13, usually something between 3x3 and 7x7)
.IPs amount
Relative amount of sharpness/\:blur to add to the image
(a sane range should be -1.5\-1.5).
.RSss
<0: blur
.br
>0: sharpen
.REss
.RE
.
.TP
.B swapuv\
Swap U & V plane.
.
.TP
.B il=[d|i][s][:[d|i][s]]
(De)interleaves lines.
The goal of this filter is to add the ability to process interlaced images
pre-field without deinterlacing them.
You can filter your interlaced DVD and play it on a TV without breaking the
interlacing.
While deinterlacing (with the postprocessing filter) removes interlacing
permanently (by smoothing, averaging, etc) deinterleaving splits the frame into
2 fields (so called half pictures), so you can process (filter) them
independently and then re-interleave them.
.PD 0
.RSs
.IPs d
deinterleave (placing one above the other)
.IPs i
interleave
.IPs s
swap fields (exchange even & odd lines)
.RE
.PD 1
.
.TP
.B fil=[i|d]
(De)interleaves lines.
This filter is very similar to the il filter but much faster, the main
disadvantage is that it does not always work.
Especially if combined with other filters it may produce randomly messed
up images, so be happy if it works but don't complain if it doesn't for
your combination of filters.
.PD 0
.RSs
.IPs d
Deinterleave fields, placing them side by side.
.IPs i
Interleave fields again (reversing the effect of fil=d).
.RE
.PD 1
.
.TP
.B field[=n]
Extracts a single field from an interlaced image using stride arithmetic
to avoid wasting CPU time.
The optional argument n specifies whether to extract the even or the odd
field (depending on whether n is even or odd).
.
.TP
.B detc[=var1=value2:var2=value2:...]
Attempts to reverse the 'telecine' process to recover a clean,
non-interlaced stream at film framerate.
This was the first and most primitive inverse telecine filter to be
added to MPlayer/\:MEncoder.
It works by latching onto the telecine 3:2 pattern and following it as
long as possible.
This makes it suitable for perfectly-telecined material, even in the
presence of a fair degree of noise, but it will fail in the presence
of complex post-telecine edits.
Development on this filter is no longer taking place, as ivtc, pullup,
and filmdint are better for most applications.
The following arguments (see syntax above) may be used to control
detc's behavior:
.RSs
.IPs dr\ \ \
Set the frame dropping mode.
0 (default) means don't drop frames to maintain fixed output framerate.
1 means always drop a frame when there have been no drops or telecine
merges in the past 5 frames.
2 means always maintain exact 5:4 input to output frame ratio.
.br
.I NOTE:
Use mode 1 or 2 with MEncoder.
.IPs am\ \ \
Analysis mode.
Available values are 0 (fixed pattern with initial frame number
specified by fr=#) and 1 (agressive search for telecine pattern).
Default is 1.
.IPs fr\ \ \
Set initial frame number in sequence.
0\-2 are the three clean progressive frames; 3 and 4 are the two
interlaced frames.
The default, -1, means 'not in telecine sequence'.
The number specified here is the type for the imaginary previous
frame before the movie starts.
.IPs "tr0, tr1, tr2, tr3"
Threshold values to be used in certain modes.
.RE
.
.TP
.B ivtc[=1]
Experimental 'stateless' inverse telecine filter.
Rather than trying to lock on to a pattern like the detc filter does,
ivtc makes its decisions independently for each frame.
This will give much better results for material that has undergone
heavy editing after telecine was applied, but as a result it is not as
forgiving of noisy input, for example TV capture.
The optional parameter (ivtc=1) corresponds to the dr=1 option for the
detc filter, and should be used with MEncoder but not with MPlayer.
As with detc, you must specify the correct output framerate (\-ofps
23.976) when using MEncoder.
Further development on ivtc has stopped, as the pullup and filmdint
filters appear to be much more accurate.
.
.TP
.B pullup[=jl:jr:jt:jb:sb:mp]\
Third-generation pulldown reversal (inverse telecine) filter,
capable of handling mixed hard-telecine, 24 fps progressive, and 30
fps progressive content.
The pullup filter is designed to be much more robust than detc or
ivtc, by taking advantage of future context in making its decisions.
Like ivtc, pullup is stateless in the sense that it does not lock onto
a pattern to follow, but it instead looks forward to the following
fields in order to identify matches and rebuild progressive frames.
It is still under development, but believed to be quite accurate.
The jl, jr, jt, and jb options set the amount of "junk" to ignore at
the left, right, top, and bottom of the image, respectively.
Left/\:right are in units of 8 pixels, while top/\:bottom are in units of
2 lines.
The default is 8 pixels on each side.
Setting the sb (strict breaks) option to 1 will reduce the chances of
pullup generating an occasional mismatched frame, but it may also
cause an excessive number of frames to be dropped during high motion
sequences.
Conversely, setting it to -1 will make pullup match fields more
easily.
This may help processing of video where there is slight blurring
between the fields, but may also cause there to be interlaced frames
in the output.
The mp (metric plane) option may be set to 1 or 2 to use a chroma
plane instead of the luma plane for doing pullup's computations.
This may improve accuracy on very clean source material, but more
likely will decrease accuracy, especially if there is chroma noise
(rainbow effect) or any grayscale video.
The main purpose of setting mp to a chroma plane is to reduce CPU load
and make pullup usable in realtime on slow machines.
.br
.I NOTE:
Always follow pullup with the softskip filter when encoding to ensure
that pullup is able to see each frame.
Failure to do so will lead to incorrect output and will usually crash,
due to design limitations in the codec/\:filter layer.
.
.TP
.B filmdint[=options]
Inverse telecine filter, similar to the pullup filter above.
It is designed to handle any pulldown pattern, including mixed soft and
hard telecine and limited support for movies that are slowed down or sped
up from their original framerate for TV.
Only the luma plane is used to find the frame breaks.
If a field has no match, it is deinterlaced with simple linear
approximation.
If the source is MPEG-2, this must be the first filter to allow
access to the field-flags set by the MPEG-2 decoder.
Depending on the source MPEG, you may be fine ignoring this advice, as
long as you do not see lots of "Bottom-first field" warnings.
With no options it does normal inverse telecine, and should be used
together with mencoder \-fps 29.97 \-ofps 23.976.
When this filter is used with mplayer, it will result in an uneven
framerate during playback, but it is still generally better than using
pp=lb or no deinterlacing at all.
Multiple options can be specified separated by /.
.RSs
.IPs crop=w:h:x:y
Just like the crop filter, but faster, and works on mixed hard and soft
telecined content as well as when y is not a multiple of 4.
If x or y would require cropping fractional pixels from the chroma
planes, the crop area is extended.
This usually means that x and y must be even.
.IPs io=ifps:ofps
For each ifps input frames the filter will output ofps frames.
The ratio of ifps/\:ofps should match the \-fps/\-ofps ratio.
This could be used to filter movies that are broadcast on TV at a frame
rate different from their original framerate.
.IPs luma_only=n
If n is nonzero, the chroma plane is copied unchanged.
This is useful for YV12 sampled TV, which discards one of the chroma
fields.
.IPs mmx2=n
On x86, if n=1, use MMX2 optimized functions, if n=2, use 3DNow!
optimized functions, othewise, use plain C.
If this option is not specified, MMX2 and 3DNow! are auto-detected, use
this option to override auto-detection.
.IPs fast=n
The larger n will speed up the filter at the expense of accuracy.
The default value is n=3.
If n is odd, a frame immediately following a frame marked with the
REPEAT_FIRST_FIELD MPEG flag is assumed to be progressive, thus filter
will not spend any time on soft-telecined MPEG-2 content.
This is the only effect of this flag if MMX2 or 3DNow! is available.
Without MMX2 and 3DNow, if n=0 or 1, the same calculations will be used
as with n=2 or 3.
If n=2 or 3, the number of luma levels used to find the frame breaks is
reduced from 256 to 128, which results in a faster filter without losing
much accuracy.
If n=4 or 5, a faster, but much less accurate metric will be used to
find the frame breaks, which is more likely to misdetect high vertical
detail as interlaced content.
.IPs verbose=n
If n is nonzero, print the detailed metrics for each frame.
Useful for debugging.
.IPs dint_thres=n
Deinterlace threshold.
Used during de-interlacing of unmatched frames.
Larger value means less deinterlacing, use n=256 to completely turn off
deinterlacing.
Default is n=8.
.IPs comb_thres=n
Threshold for comparing a top and bottom fields.
Defaults to 128.
.IPs diff_thres=n
Threshold to detect temporal change of a field.
Default is 128.
.IPs sad_thres=n
Sum of Absolute Difference threshold, default is 64.
.RE
.
.TP
.B softpulldown
This filter works only correct with MEncoder and acts on the MPEG2 flags
used for soft 3:2 pulldown (soft telecine).
If you want to use the ivtc or detc filter on movies that are partly soft
telecined, inserting this filter before them should make them more reliable.
.
.TP
.B divtc[=options]
Inverse telecine for deinterlaced video.
If 3:2-pulldown telecined video has lost one of the fields or is deinterlaced
using a method that keeps one field and interpolates the other, the result is
a juddering video that has every fourth frame duplicated.
This filter is intended to find and drop those duplicates and restore the
original film framerate.
When using this filter, you must specify \-ofps that is 4/\:5 of the fps of the
input file (23.976 if the input is 29.97fps).
The options are:
.RSs
.IPs pass=1|2
Use two-pass mode.
This produces best results.
Pass 1 analyzes the video and writes the results to a log file.
Pass 2 then reads this log file and uses the information to do the actual work.
Note that these passes do NOT correspond to pass 1 and 2 of the encoding
process.
In order to use divtc two-pass with two-pass video encoding, you must perform
three passes: first divtc pass 1 and encoder pass 1, then divtc pass 2 and
encoder pass 1, and finally divtc pass 2 and encoder pass 2.
.IPs file=filename
Set the 2-pass log filename (default: "framediff.log").
.IPs threshold=value
Set the minimum strength the telecine pattern must have for the filter to
believe in it (default: 0.5).
This is used to avoid recognizing false pattern from the parts of the video
that are very dark or very still.
.IPs window=numframes
Set the number of past frames to look at when searching for pattern
(default: 30).
Longer window improves the reliability of the pattern search, but shorter
window improves the reaction time to the changes in the telecine phase.
This only affects the one-pass mode.
The two-pass mode currently uses fixed window that extends to both future
and past.
.IPs phase=0|1|2|3|4
Sets the initial telecine phase for one-pass mode (default: 0).
The two-pass mode can see the future, so it is able to use the correct
phase from the beginning, but one-pass mode can only guess.
It catches the correct phase when it finds it, but this option can be used
to fix the possible juddering at the beginning.
The first pass of the two-pass mode also uses this, so if you save the output
from the first pass, you get constant phase result.
.IPs deghost=value
Set the deghosting threshold (0\-255 for one-pass mode, -255\-255 for two-pass
mode, default 0).
If nonzero, deghosting mode is used.
This is for video that has been deinterlaced by blending the fields
together instead of dropping one of the fields.
Deghosting amplifies any compression artifacts in the blended frames, so the
parameter value is used as a threshold to exclude those pixels from
deghosting that differ from the previous frame less than specified value.
If two-pass mode is used, then negative value can be used to make the
filter analyze the whole video in the beginning of pass-2 to determine
whether it needs deghosting or not and then select either zero or the
absolute value of the parameter.
Specify this option for pass-2, it makes no difference on pass-1.
.RE
.
.TP
.B phase=[t|b|p|a|u|T|B|A|U][:v]
Delay interlaced video by one field time so that the field order
changes.
The intended use is to fix PAL movies that have been captured with the
opposite field order to the film-to-video transfer.
The options are:
.RSs
.IPs t
Capture field order top-first, transfer bottom-first.
Filter will delay the bottom field.
.IPs b
Capture bottom-first, transfer top-first.
Filter will delay the top field.
.IPs p
Capture and transfer with the same field order.
This mode only exists for the documentation of the other options to refer to,
but if you actually select it, the filter will faithfully do nothing ;-)
.IPs a
Capture field order determined automatically by field flags, transfer opposite.
Filter selects among t and b modes on a frame by frame basis using field flags.
If no field information is available, then this works just like u.
.IPs u
Capture unknown or varying, transfer opposite.
Filter selects among t and b on a frame by frame basis by analyzing the
images and selecting the alternative that produces best match between the
fields.
.IPs T
Capture top-first, transfer unknown or varying.
Filter selects among t and p using image analysis.
.IPs B
Capture bottom-first, transfer unknown or varying.
Filter selects among b and p using image analysis.
.IPs A
Capture determined by field flags, transfer unknown or varying.
Filter selects among t, b and p using field flags and image analysis.
If no field information is available, then this works just like U.
This is the default mode.
.IPs U
Both capture and transfer unknown or varying.
Filter selects among t, b and p using image analysis only.
.IPs v
Verbose operation.
Prints the selected mode for each frame and the average squared difference
between fields for t, b, and p alternatives.
.RE
.
.TP
.B telecine[=start]
Apply 3:2 'telecine' process to increase framerate by 20%.
This most likely will not work correctly with MPlayer, but it can
be used with 'mencoder \-fps 29.97 \-ofps 29.97 \-vf telecine'.
Both fps options are essential!
(A/\:V sync will break if they are wrong.)
The optional start parameter tells the filter where in the telecine
pattern to start (0\-3).
.
.TP
.B tinterlace[=mode]
Temporal field interlacing \- merge pairs of frames into an interlaced
frame, halving the framerate.
Even frames are moved into the upper field, odd frames to the lower field.
This can be used to fully reverse the effect of the tfields filter (in mode 0).
Available modes are:
.PD 0
.RSs
.IPs 0
Move odd frames into the upper field, even into the lower field, generating
a full-height frame at half framerate.
.IPs 1
Only output odd frames, even frames are dropped; height unchanged.
.IPs 2
Only output even frames, odd frames are dropped; height unchanged.
.IPs 3
Expand each frame to full height, but pad alternate lines with black;
framerate unchanged.
.RE
.PD 1
.
.TP
.B tfields[=mode]
Temporal field separation \- split fields into frames, doubling the
output framerate.
Like the telecine filter, tfields will only work properly with
MEncoder, and only if both \-fps and \-ofps are set to the
desired (double) framerate!
Available modes are:
.PD 0
.RSs
.IPs 0
Leave fields unchanged. (This will jump/\:flicker.)
.IPs 1
Interpolate missing lines. (The algorithm used might not be so good.)
.IPs 2
Translate fields by 1/4 pixel with linear interpolation (no jump).
.IPs 4
Translate fields by 1/4 pixel with 4tap filter (higher quality).
.RE
.PD 1
.
.TP
.B boxblur=radius:power[:radius:power]
box blur
.PD 0
.RSs
.IPs <radius>
blur filter strength
.IPs <power>
number of filter applications
.RE
.PD 1
.
.TP
.B sab=radius:pf:colorDiff[:radius:pf:colorDiff]
shape adaptive blur
.PD 0
.RSs
.IPs <radius>
blur filter strength (~0.1\-4.0) (slower if larger)
.IPs <pf>\
prefilter strength (~0.1\-2.0)
.IPs <colorDiff>
maximum difference between pixels to still be considered (~0.1\-100.0)
.RE
.PD 1
.
.TP
.B smartblur=radius:strength:threshold[:radius:strength:threshold]
smart blur
.PD 0
.RSs
.IPs <radius>
blur filter strength (~0.1\-5.0) (slower if larger)
.IPs <strength>
blur (0.0\-1.0) or sharpen (-1.0\-0.0)
.IPs <threshold>
filter all (0), filter flat areas (0\-30) or filter edges (-30\-0)
.RE
.PD 1
.
.TP
.B perspective=x0:y0:x1:y1:x2:y2:x3:y3:t
Correct the perspective of movies not filmed perpendicular to the screen.
.PD 0
.RSs
.IPs x0,y0,...
coordinates of the top left, top right, bottom left, bottom right corners
.IPs t\ \ \ \
linear (0) or cubic resampling (1)
.RE
.PD 1
.
.TP
.B 2xsai\ \
Scale and smooth the image with the 2x scale and interpolate algorithm.
.
.TP
.B 1bpp\ \ \
1bpp bitmap to YUV/\:BGR 8/\:15/\:16/\:32 conversion
.
.TP
.B down3dright[=lines]
Reposition and resize stereoscopic images.
Extracts both stereo fields and places them side by side, resizing
them to maintain the original movie aspect.
.PD 0
.RSs
.IPs lines
number of lines to select from the middle of the image (default: 12)
.RE
.PD 1
.
.TP
.B bmovl=hidden:opaque:fifo
The bitmap overlay filter reads bitmaps from a FIFO and displays them
on top of the movie, allowing some transformations on the image.
Also see TOOLS/bmovl-test.c for a small bmovl test program.
.PD 0
.RSs
.IPs <hidden>
Set the default value of the 'hidden' flag (0=visible, 1=hidden).
.IPs <opaque>
Set the default value of the 'opaque' flag (0=transparent, 1=opaque).
.IPs <fifo>
path/\:filename for the FIFO (named pipe connecting mplayer \-vf bmovl to the
controlling application)
.RE
.PD 1
.sp 1
.RS
FIFO commands are:
.RE
.PD 0
.RSs
.IPs "RGBA32 width height xpos ypos alpha clear"
followed by width*height*4 Bytes of raw RGBA32 data.
.IPs "ABGR32 width height xpos ypos alpha clear"
followed by width*height*4 Bytes of raw ABGR32 data.
.IPs "RGB24 width height xpos ypos alpha clear"
followed by width*height*3 Bytes of raw RGB24 data.
.IPs "BGR24 width height xpos ypos alpha clear"
followed by width*height*3 Bytes of raw BGR24 data.
.IPs "ALPHA width height xpos ypos alpha"
Change alpha transparency of the specified area.
.IPs "CLEAR width height xpos ypos"
Clear area.
.IPs OPAQUE
Disable all alpha transparency.
Send "ALPHA 0 0 0 0 0" to enable it again.
.IPs HIDE\
Hide bitmap.
.IPs SHOW\
Show bitmap.
.RE
.PD 1
.sp 1
.RS
Arguments are:
.RE
.PD 0
.RSs
.IPs "width, height"
image/area size
.IPs "xpos, ypos"
Start blitting at position x/y.
.IPs alpha
Set alpha difference.
If you set this to -255 you can then send a sequence of ALPHA-commands to set
the area to -225, -200, -175 etc for a nice fade-in-effect! ;)
.RSss
0:    same as original
.br
255:  Make everything opaque.
.br
-255: Make everything transparent.
.REss
.IPs clear
Clear the framebuffer before blitting.
.RSss
0: The image will just be blitted on top of the old one, so you do not need to
send 1.8MB of RGBA32 data every time a small part of the screen is updated.
.br
1: clear
.REss
.RE
.PD 1
.
.TP
.B framestep=I|[i]step
Renders only every nth frame or every Intra (key) frame.
.sp 1
If you call the filter with I (uppercase) as the parameter, then ONLY
keyframes are rendered.
For DVDs it generally means one in every 15/\:12  frames (IBBPBBPBBPBBPBB),
for AVI it means every scene change or every keyint value (see \-lavcopts
keyint= value if you use MEncoder to encode the video).
.sp 1
When a keyframe is found, an 'I!' string followed by a newline character is
printed, leaving the current line of MPlayer/\:MEncoder output on the screen,
because it contains the time (in seconds) and frame number of the keyframe
(You can use this information to split the AVI.).
.sp 1
If you call the filter with a numeric parameter 'step' then only one in
every 'step' frames is rendered.
.sp 1
If you put an 'i' (lowercase) before the number then an I! is printed
(like the I parameter).
.sp 1
If you give only the i then nothing is done to the frames, only I! is
printed.
.
.TP
.B tile=xtiles:ytiles:output:start:delta
Tile a series of images into a single, bigger image.
If you omit a parameter or use a value less than 0, then the default
value is used.
You can also stop when you are satisfied (... \-vf tile=10:5 ...).
It is probably a good idea to put the scale filter before the tile :-)
.sp 1
The parameters are:
.sp 1
.PD 0
.RSs
.IPs <xtiles>
number of tiles on the x axis (default: 5)
.IPs <ytiles>
number of tiles on the y axis (default: 5)
.IPs <output>
Render the tile when 'output' number of frames are reached, where 'output'
should be a number less than xtile * ytile.
Missing tiles are left blank.
You could, for example, write an 8 * 7 tile every 50 frames to have one
image every 2 seconds @ 25 fps.
.IPs <start>
outer border thickness in pixels (default: 2)
.IPs <delta>
inner border thickness in pixels (default: 4)
.RE
.PD 1
.
.TP
.B delogo[=x:y:w:h:t]
Suppresses a TV station logo by a simple interpolation of the
surrounding pixels.
Just set a rectangle covering the logo and watch it disappear (and
sometimes something even uglier appear \- your mileage may vary).
.PD 0
.RSs
.IPs x,y
top left corner of the logo
.IPs w,h
width and height of the cleared rectangle
.IPs t
Thickness of the fuzzy edge of the rectangle (added to w and h).
When set to -1, a green rectangle is drawn on the screen to
simplify finding the right x,y,w,h parameters.
.RE
.PD 1
.
.TP
.B zrmjpeg[=options]
Software YV12 to MJPEG encoder for use with the zr2 video
output device.
.RSs
.IPs maxheight=h|maxwidth=w
These options set the maximum width and height the zr card
can handle (the MPlayer filter layer currently cannot query those).
.IPs {dc10+,dc10,buz,lml33}-{PAL|NTSC}
Use these options to set maxwidth and maxheight automatically to the
values known for card/\:mode combo.
For example, valid options are: dc10-PAL and buz-NTSC (default: dc10+PAL)
.IPs color|bw
Select color or black and white encoding.
Black and white encoding is faster.
Color is the default.
.IPs hdec={1,2,4}
Horizontal decimation 1, 2 or 4.
.IPs vdec={1,2,4}
Vertical decimation 1, 2 or 4.
.IPs quality=1-20
Set JPEG compression quality [BEST] 1 - 20 [VERY BAD].
.IPs fd|nofd
By default, decimation is only performed if the Zoran hardware
can upscale the resulting MJPEG images to the original size.
The option fd instructs the filter to always perform the requested
decimation (ugly).
.RE
.
.
.
.SH "GENERAL ENCODING OPTIONS (MENCODER ONLY)"
.
.TP
.B \-audio-delay <0.0\-...>
Sets the audio delay field in the header.
Default is 0.0, negative values do not work.
This does not delay the audio while encoding, but the player will see the
default audio delay, sparing you the use of the \-delay option.
.
.TP
.B \-audio-density <1\-50>
Number of audio chunks per second (default is 2 for 0.5s long audio chunks).
.br
.I NOTE:
CBR only, VBR ignores this as it puts each packet in a new chunk.
.
.TP
.B \-audio-preload <0.0\-2.0>
Sets up the audio buffering time interval (default: 0.5s).
.
.TP
.B \-endpos <[[hh:]mm:]ss[.ms]|size[b|kb|mb]> (also see \-ss and \-sb)
Stop encoding at the given time or byte position.
.br
.I NOTE:
Byte position will not be accurate, as it can only stop at
a frame boundary.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-endpos 56"
Encode only 56 seconds.
.IPs "\-endpos 01:10:00"
Encode only 1 hour 10 minutes.
.IPs "\-endpos 100mb"
Encode only 100 MBytes.
.RE
.PD 1
.
.TP
.B \-ffourcc <fourcc>
Can be used to override the video fourcc of the output file.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-ffourcc div3"
Will have the output file contain 'div3' as video fourcc.
.RE
.PD 1
.
.TP
.B \-force-avi-aspect <0.2\-3.0>
Override the aspect stored in the AVI OpenDML vprp header.
This can be used to change the aspect ratio with \-ovc copy.
.
.TP
.B \-info <option1:option2:...> (AVI only)
Specify the info header of the resulting AVI file.
.sp 1
Available options are:
.RSs
.IPs help\
Show this description.
.IPs name=<value>
title of the work
.IPs artist=<value>
artist or author of the work
.IPs genre=<value>
original work category
.IPs subject=<value>
contents of the work
.IPs copyright=<value>
copyright information
.IPs srcform=<value>
original format of the digitized material
.IPs comment=<value>
general comments about the work
.RE
.
.TP
.B \-noautoexpand
Do not automatically insert the expand filter into the MEncoder filter chain.
Useful to control at which point of the filter chain subtitles are rendered
when hardcoding subtitles onto a movie.
.
.TP
.B \-noencodedups
Do not attempt to encode duplicate frames in duplicate; always output
zero-byte frames to indicate duplicates.
Zero-byte frames will be written anyway unless a filter or encoder
capable of doing duplicate encoding is loaded.
Currently the only such filter is harddup.
.
.TP
.B \-noodml (\-of avi only)
Do not write OpenDML index for AVI files >1GB.
.
.TP
.B \-noskip
Do not skip frames.
.
.TP
.B \-o <filename>
Outputs to the given filename, instead of the default 'test.avi'.
.
.TP
.B \-oac <codec name>
Encode with the given audio codec (no default set).
.br
.I NOTE:
Use \-oac help to get a list of available audio codecs.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-oac copy"
no encoding, just streamcopy
.IPs "\-oac pcm"
Encode to uncompressed PCM.
.IPs "\-oac mp3lame"
Encode to MP3 (using LAME).
.IPs "\-oac lavc"
Encode with a libavcodec codec.
.RE
.PD 1
.
.TP
.B \-of <format> (BETA CODE!)
Encode to the specified container format (default: AVI).
.br
.I NOTE:
Use \-of help to get a list of available container formats.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-of avi"
Encode to AVI.
.IPs "\-of mpeg"
Encode to MPEG.
.IPs "\-of rawvideo"
raw video stream (no muxing - one video stream only)
.RE
.PD 1
.
.TP
.B \-ofps <fps>
Specify a frames per second (fps) value for the output file,
which can be different from that of the source material.
Must be set for variable fps (ASF, some MOV) and progressive
(29.97fps telecined MPEG) files.
.
.TP
.B \-ovc <codec name>
Encode with the given video codec (no default set).
.br
.I NOTE:
Use \-ovc help to get a list of available video codecs.
.sp 1
.I EXAMPLE:
.PD 0
.RSs
.IPs "\-ovc copy"
no encoding, just streamcopy
.IPs "\-ovc divx4"
Encode to DivX4/\:DivX5.
.IPs "\-ovc raw"
Encode to an arbitrary uncompressed format (use \-vf format to select).
.IPs "\-ovc lavc"
Encode with a libavcodec codec.
.RE
.PD 1
.
.TP
.B \-passlogfile <filename>
Dump first pass information to <filename> instead of the default divx2pass.log
in 2-pass encoding mode.
.
.TP
.B \-skiplimit <value>
Specify the maximum number of frames that may be skipped after
encoding one frame (\-noskiplimit for unlimited).
.
.TP
.B \-vobsubout <basename>
Specify the basename for the output .idx and .sub files.
This turns off subtitle rendering in the encoded movie and diverts it to
VOBsub subtitle files.
.
.TP
.B \-vobsuboutid <langid>
Specify the language two letter code for the subtitles.
This overrides what is read from the DVD or the .ifo file.
.
.TP
.B \-vobsuboutindex <index>
Specify the index of the subtitles in the output files (default: 0).
.
.
.
.SH "CODEC SPECIFIC ENCODING OPTIONS (MENCODER ONLY)"
You can specify codec specific encoding parameters using the following
syntax:
.
.TP
.B \-<codec>opts <option1[=value],option2,...>
.
.PP
Where <codec> may be: lavc, xvidenc, divx4, lame, toolame, x264enc
.
.
.SS divx4 (\-divx4opts)
DivX4 is obsolete and only supported for completeness.
For details about DivX4 options, read the source, most options are not
described here.
.
.TP
.B help\ \ \
get help
.
.TP
.B br=<value>
Specify bitrate.
.RSs
.IPs 4\-16000
(in kbit)
.IPs 16001\-24000000
(in bit)
.RE
.
.TP
.B key=<value>
maximum keyframe interval (in frames)
.
.TP
.B deinterlace
Enable deinterlacing (avoid it, DivX4 is buggy).
.
.TP
.B q=<1\-5>
quality (1\-fastest, 5\-best)
.
.TP
.B min_quant=<1\-31>
minimum quantizer
.
.TP
.B max_quant=<1\-31>
maximum quantizer
.
.TP
.B rc_period=<value>
rate control period
.
.TP
.B rc_reaction_period=<value>
rate control reaction period
.
.TP
.B rc_reaction_ratio=<value>
rate control reaction ratio
.
.TP
.B crispness=<0\-100>
Specify crispness/\:smoothness.
.
.TP
.B pass=<1\-2>
With this you can encode 2pass DivX4 files.
First encode with pass=1, then do another encode with the
same parameters and pass=2.
.
.TP
.B vbrpass=<0\-2>
Override the pass argument and use the XviD VBR library instead of DivX4 VBR.
Available options are:
.RSs
.IPs 0
one pass encoding (as in not putting pass on the command line)
.IPs 1
Analysis (first) pass of two pass encoding.
The resulting AVI file can be directed to /dev/\:null.
.IPs 2
Final (second) pass of two pass encoding.
.RE
.
.
.SS lame (\-lameopts)
.
.TP
.B help\ \ \
get help
.
.TP
.B vbr=<0\-4>
variable bitrate method
.PD 0
.RSs
.IPs 0
cbr
.IPs 1
mt
.IPs 2
rh (default)
.IPs 3
abr
.IPs 4
mtrh
.RE
.PD 1
.
.TP
.B abr\ \ \ \
average bitrate
.
.TP
.B cbr\ \ \ \
constant bitrate
Also forces CBR mode encoding on subsequent ABR presets modes.
.
.TP
.B br=<0\-1024>
bitrate in kbps (CBR and ABR only)
.
.TP
.B q=<0\-9>
quality (0\-highest, 9\-lowest) (VBR only)
.
.TP
.B aq=<0\-9>
algorithmic quality (0\-best/\:slowest, 9\-worst/\:fastest)
.
.TP
.B ratio=<1\-100>
compression ratio
.
.TP
.B vol=<0\-10>
audio input gain
.
.TP
.B mode=<0\-3>
(default: auto)
.PD 0
.RSs
.IPs 0
stereo
.IPs 1
joint-stereo
.IPs 2
dualchannel
.IPs 3
mono
.RE
.PD 1
.
.TP
.B padding=<0\-2>
.PD 0
.RSs
.IPs 0
none
.IPs 1
all
.IPs 2
adjust
.RE
.PD 1
.
.TP
.B fast\ \ \
Switch on faster encoding on subsequent VBR presets modes.
This results in slightly lower quality and higher bitrates.
.
.TP
.B highpassfreq=<freq>
Set a highpass filtering frequency in Hz.
Frequencies below the specified one will be cut off.
A value of -1 will disable filtering, a value of 0
will let LAME choose values automatically.
.
.TP
.B lowpassfreq=<freq>
Set a lowpass filtering frequency in Hz.
Frequencies above the specified one will be cut off.
A value of -1 will disable filtering, a value of 0
will let LAME choose values automatically.
.
.TP
.B preset=<value>
preset values
.RSs
.IPs help\
Print additional options and information about presets settings.
.IPs medium
VBR encoding, good quality, 150\-180 kbps bitrate range
.IPs standard
VBR encoding, high quality, 170\-210 kbps bitrate range
.IPs extreme
VBR encoding, very high quality, 200\-240 kbps bitrate range
.IPs insane
CBR encoding, highest preset quality, 320 kbps bitrate
.IPs <8\-320>
ABR encoding at average given kbps bitrate
.RE
.sp 1
.RS
.I EXAMPLE:
.RE
.PD 0
.RSs
.IPs fast:preset=standard
suitable for most people and most music types and already quite high quality
.IPs cbr:preset=192
Encode with ABR presets at a 192 kbps forced constant bitrate.
.IPs preset=172
Encode with ABR presets at a 172 kbps average bitrate.
.IPs preset=extreme
for people with extremely good hearing and similar equipment
.RE
.PD 1
.
.
.SS toolame (\-toolameopts)
.
.TP
.B br=<0\-384> (CBR only)
bitrate in kbps
.TP
.B mode=<stereo  |  jstereo  |  mono  |  dual>
(default: mono for 1-channel audio, stereo otherwise)
.TP
.B psy=<0\-3>
psychoacoustic model (default: 2)
.TP
.B errprot=<0 | 1>
Include error protection.
.TP
.B debug=<0\-10>
debug level
.RE
.PD 1
.
.
.SS lavc (\-lavcopts)
Many libavcodec (lavc for short) options are tersely documented.
Read the source for full details.
.PP
.I EXAMPLE:
.PD 0
.RSs
.IPs vcodec=msmpeg4:vbitrate=1800:vhq:keyint=250
.RE
.PD 1
.
.TP
.B acodec=<value>
audio codec (default: mp2)
.PD 0
.RSs
.IPs mp2\ \
MPEG Layer 2
.IPs mp3\ \
MPEG Layer 3
.IPs ac3\ \
AC3
.IPs adpcm_ima_wav
IMA Adaptive PCM (4bits per sample, 4:1 compression)
.RE
.PD 1
.
.TP
.B abitrate=<value>
audio bitrate in kbps (default: 224)
.
.TP
.B atag=<value>
Use the specified Windows audio format tag (e.g.\& atag=0x55).
.
.TP
.B bit_exact
Use only bit exact algorithms (except (I)DCT).
Additionally bit_exact disables several optimizations and thus
should only be used for regression tests, which need binary
identical files even if the encoder version changes.
This also suppresses the user_data header in MPEG-4 streams.
Do not use this option unless you know exactly what you are doing.
.
.TP
.B threads=<1\-8>
Maximum number of threads to use (default: 1).
May have a slight negative effect on motion estimation.
.RE
.
.TP
.B vcodec=<value>
Employ the specified codec (default: mpeg4).
.PD 0
.RSs
.IPs mjpeg
Motion JPEG
.IPs ljpeg
Lossless JPEG
.IPs h263\
H.263
.IPs h263p
H.263+
.IPs mpeg4
DivX 4/\:5
.IPs msmpeg4
DivX 3
.IPs msmpeg4v2
MS MPEG4v2
.IPs wmv1\
Windows Media Video, version 1 (AKA WMV7)
.IPs wmv2\
Windows Media Video, version 2 (AKA WMV8)
.IPs rv10\
an old RealVideo codec
.IPs mpeg1video
MPEG1 video
.IPs mpeg2video
MPEG2 video
.IPs huffyuv
HuffYUV
.IPs asv1\
ASUS Video v1
.IPs asv2\
ASUS Video v2
.IPs ffv1\
FFmpeg's lossless video codec
.RE
.PD 1
.
.TP
.B vqmin=<1\-31>
minimum quantizer (pass\ 1/\:2)
.RSs
.IPs 1
Not recommended (much larger file, little quality difference and weird side
effects: msmpeg4, h263 will be very low quality, ratecontrol will be confused
resulting in lower quality and some decoders will not be able to decode it).
.IPs 2
Recommended for normal mpeg4/\:mpeg1video encoding (default).
.IPs 3
Recommended for h263(p)/\:msmpeg4.
The reason for preferring 3 over 2 is that 2 could lead to overflows.
(This will be fixed for h263(p) by changing the quantizer per MB in
the future, msmpeg4 cannot be fixed as it does not support that.)
.RE
.
.TP
.B lmin=<0.01\-255.0>
Minimum Lagrange multiplier for ratecontrol, you probably want it to be
equal to or lower than vqmin (default: 2.0).
.RE
.
.TP
.B lmax=<0.01\-255.0>
maximum Lagrange multiplier for ratecontrol (default: 31.0)
.RE
.
.TP
.B vqscale=<1\-31>
Constant quantizer /\: constant quality encoding (selects fixed quantizer mode).
A lower value means better quality but larger files (default: 0 (disabled)).
1 is not recommended (see vqmin for details).
.
.TP
.B vqmax=<1\-31>
Maximum quantizer (pass\ 1/\:2), 10\-31 should be a sane range (default: 31).
.
.TP
.B mbqmin=<1\-31>
minimum macroblock quantizer (pass\ 1/\:2) (default: 2)
.
.TP
.B mbqmax=<1\-31>
maximum macroblock quantizer (pass\ 1/\:2) (default: 31)
.
.TP
.B vqdiff=<1\-31>
maximum quantizer difference between I- or P-frames (pass\ 1/\:2) (default: 3)
.
.TP
.B vmax_b_frames=<0\-4>
maximum number of B-frames between non-B-frames:
.PD 0
.RSs
.IPs 0
no B-frames (default)
.IPs 0\-2
sane range for MPEG4
.RE
.PD 1
.
.TP
.B vme=<0\-5>
motion estimation method.
Available methods are:
.PD 0
.RSs
.IPs 0
none (very low quality)
.IPs 1
full (slow, currently unmaintained and disabled)
.IPs 2
log (low quality, currently unmaintained and disabled)
.IPs 3
phods (low quality, currently unmaintained and disabled)
.IPs 4
EPZS: size=1 diamond, size can be adjusted with the *dia options
(default)
.IPs 5
X1 (experimental, currently aliased to EPZS)
.RE
.PD 1
.sp 1
.RS
.br
.I NOTE:
0\-3 currently ignores the amount of bits spent,
so quality may be low.
.RE
.
.TP
.B me_range=<0\-9999>
motion estimation search range (default: 0 (unlimited))
.
.TP
.B mbd=<0\-2>
Macroblock decision algorithm (high quality mode), encode each macro
block in all modes and choose the best.
This is slow but results in better quality and file size.
.PD 0
.RSs
.IPs 0
Use mbcmp (default).
.IPs 1
Select the MB mode which needs the fewest bits (=vhq).
.IPs 2
Select the MB mode which has the best rate distortion.
.RE
.PD 1
.
.TP
.B vhq\ \ \ \
Same as mbd=1, kept for compatibility reasons.
.
.TP
.B v4mv\ \ \
Allow 4 motion vectors per macroblock (slightly better quality).
Works better if used with mbd>0.
.
.TP
.B obmc\ \ \
overlapped block motion compensation (H.263+)
.
.TP
.B loop\ \ \
loop filter (H.263+)
note, this is broken
.
.TP
.B inter_threshold <-1000\-1000>
Does absolutely nothing at the moment.
.
.TP
.B keyint=<0\-300>
maximum interval between keyframes in frames (default: 250 or one
keyframe every ten seconds in a 25fps movie).
Keyframes are needed for seeking as seeking is only possible to a keyframe but
keyframes need more space than other frames so larger numbers here mean
slightly smaller files, but less precise seeking, 0 means no keyframes.
Values >300 are not recommended as the quality might be bad depending upon
decoder, encoder and luck.
For a strict MPEG1/\:2/\:4 compliance this would have to be <=132.
.
.TP
.B sc_threshold=<-1000000\-1000000>
Threshold for scene change detection.
Libavcodec inserts a keyframe when it detects a scene change.
You can specify the sensitivity of the detection with this option.
-1000000 means there is a scene change detected at every frame, 1000000 means
no scene changes are detected (default 0).
.
.TP
.B vb_strategy=<0\-1>
strategy to choose between I/\:P/\:B-frames (pass\ 2):
.PD 0
.RSs
.IPs 0
Always use the maximum number of B-frames (default).
.IPs 1
Avoid B-frames in high motion scenes.
This will cause bitrate misprediction.
.RE
.PD 1
.
.TP
.B vpass=<1\-3>
Activates internal two (or three) pass mode, only specify if you wish to
use two (or three) pass encoding.
.PD 0
.RSs
.IPs 1
first pass (also see turbo)
.IPs 2
second pass
.IPs 3
Nth pass (second and third passes of three pass encoding)
.RE
.RS
Here is how it works, and how to use it:
.br
The first pass (vpass=1) writes the stats file.
You might want to deactivate some CPU-hungry options, like "turbo"
mode does.
.br
In two pass mode, the second pass (vpass=2) reads the stats file and
bases ratecontrol decisions on it.
.br
In three pass mode, the second pass (vpass=3, that is not a typo )
does both: It first reads the stats, then overwrites them.
You might want to backup divx2pass.log before doing this if there is
any possibility that you will have to cancel MEncoder.
You can use all encoding options, except very CPU-hungry options like "qns".
.br
The third pass (vpass=3) is the same as the second pass, except that it has
the second pass's stats to work from.
You can use all encoding options, including CPU-hungry ones.
.RE
.PD 1
.sp 1
.RS
huffyuv:
.RE
.PD 0
.RSs
.IPs "pass 1"
Saves statistics.
.IPs "pass 2"
Encodes with an optimal Huffman table based upon statistics
from the first pass.
.RE
.PD 1
.
.TP
.B turbo (2-pass only)
Dramatically speeds up pass 1 using faster algorithms and disabling
CPU-intensive options.
This will probably reduce global PSNR a little bit (around 0.01dB) and
change individual frame type and PSNR little bit more (up to 0.03dB).
.
.TP
.B aspect=<x/\:y>
Store movie aspect internally, just like with MPEG files.
Much nicer than rescaling, because quality is not decreased.
Only MPlayer will play these files correctly, other players will display
them with wrong aspect.
The aspect parameter can be given as a ratio or a floating point number.
.sp 1
.RS
.I EXAMPLE:
.RE
.RSs
.PD 0
.IPs "aspect=16/\:9 or aspect=1.78"
.PD 1
.RE
.
.TP
.B autoaspect
Same as the aspect option, but automatically computes aspect, taking
into account all the adjustments (crop/\:expand/\:scale/\:etc.) made in the
filter chain.
Does not incur a performance penalty, so you can safely leave it
always on.
.
.TP
.B vbitrate=<value>
Specify bitrate (pass\ 1/\:2) (default: 800).
.br
.I WARNING:
1kBit = 1000 Bits
.PD 0
.RSs
.IPs 4\-16000
(in kbit)
.IPs 16001\-24000000
(in bit)
.RE
.PD 1
.
.TP
.B vratetol=<value>
approximated filesize tolerance in kBit.
1000\-100000 is a sane range.
(warning: 1kBit = 1000 Bits)
(default: 8000)
.br
.I NOTE:
vratetol should not be too large during the second pass or there might
be problems if vrc_(min|max)rate is used.
.
.TP
.B vrc_maxrate=<value>
maximum bitrate in kbit/\:sec (pass\ 1/\:2)
(default: 0, unlimited)
.
.TP
.B vrc_minrate=<value>
minimum bitrate in kbit/\:sec (pass\ 1/\:2)
(default: 0, unlimited)
.
.TP
.B vrc_buf_size=<value>
buffer size in kbit (pass\ 1/\:2).
For MPEG1/\:2 this also sets the vbv buffer size, use 327 for VCD,
917 for SVCD and 1835 for DVD.
.
.TP
.B vrc_buf_aggressivity
currently useless
.
.TP
.B vrc_strategy
Dummy, reserved for future use.
.
.TP
.B vb_qfactor=<-31.0\-31.0>
quantizer factor between B- and non-B-frames (pass\ 1/\:2) (default: 1.25)
.
.TP
.B vi_qfactor=<-31.0\-31.0>
quantizer factor between I- and non-I-frames (pass\ 1/\:2) (default: 0.8)
.
.TP
.B vb_qoffset=<-31.0\-31.0>
quantizer offset between B- and non-B-frames (pass\ 1/\:2) (default: 1.25)
.
.TP
.B vi_qoffset=<-31.0\-31.0>
(pass\ 1/\:2) (default: 0.0)
.br
if v{b|i}_qfactor > 0
.br
I/\:B-frame quantizer = P-frame quantizer * v{b|i}_qfactor + v{b|i}_qoffset
.br
else
.br
do normal ratecontrol (do not lock to next P-frame quantizer) and
set q= -q * v{b|i}_qfactor + v{b|i}_qoffset
.br
.I HINT:
To do constant quantizer encoding with different quantizers for
I/\:P- and B-frames you can use:
lmin= <ip_quant>:lmax= <ip_quant>:vb_qfactor= <b_quant/\:ip_quant>.
.
.TP
.B vqblur=<0.0\-1.0> (pass 1)
Quantizer blur (default: 0.5), larger values will average the
quantizer more over time (slower change).
.PD 0
.RSs
.IPs 0.0
Quantizer blur disabled.
.IPs 1.0
Average the quantizer over all previous frames.
.RE
.PD 1
.
.TP
.B vqblur=<0.0\-99.0> (pass 2)
Quantizer gaussian blur (default: 0.5), larger values will average
the quantizer more over time (slower change).
.
.TP
.B vqcomp=<value>
Quantizer compression, depends upon vrc_eq (pass\ 1/\:2) (default: 0.5).
.
.TP
.B vrc_eq=<equation>
main ratecontrol equation (pass\ 1/\:2)
.RE
.RSs
.IPs 1\ \ \ \
constant bitrate
.IPs tex\ \
constant quality
.IPs 1+(tex/\:avgTex-1)*qComp
approximately the equation of the old ratecontrol code
.IPs tex^qComp
with qcomp 0.5 or something like that (default)
.RE
.PP
.RS
infix operators:
.RE
.RSs
.IPs +,-,*,/,^
.RE
.PP
.RS
variables:
.RE
.RSs
.IPs tex\ \
texture complexity
.IPs iTex,pTex
intra, non-intra texture complexity
.IPs avgTex
average texture complexity
.IPs avgIITex
average intra texture complexity in I-frames
.IPs avgPITex
average intra texture complexity in P-frames
.IPs avgPPTex
average non-intra texture complexity in P-frames
.IPs avgBPTex
average non-intra texture complexity in B-frames
.IPs mv\ \ \
Bits used for motion vectors
.IPs fCode
maximum length of motion vector in log2 scale
.IPs iCount
number of intra macroblocks / number of macroblocks
.IPs var\ \
spatial complexity
.IPs mcVar
temporal complexity
.IPs qComp
qcomp from the command line
.IPs "isI, isP, isB"
Is 1 if picture type is I/\:P/\:B else 0.
.IPs Pi,E\
See your favorite math book.
.RE
.PP
.RS
functions:
.RE
.RSs
.IPs max(a,b),min(a,b)
maximum / minimum
.IPs gt(a,b)
is 1 if a>b, 0 otherwise
.IPs lt(a,b)
is 1 if a<b, 0 otherwise
.IPs eq(a,b)
is 1 if a==b, 0 otherwise
.IPs "sin, cos, tan, sinh, cosh, tanh, exp, log, abs"
.RE
.
.TP
.B vrc_override=<options>
User specified quality for specific parts (ending, credits, ...) (pass\ 1/\:2).
The options are <start-frame>, <end-frame>, <quality>[/\:<start-frame>,
<end-frame>, <quality>[/\:...]]:
.PD 0
.RSs
.IPs "quality (2\-31)"
quantizer
.IPs "quality (-500\-0)"
quality correction in %
.RE
.PD 1
.
.TP
.B vrc_init_cplx=<0\-1000>
initial complexity (pass\ 1)
.
.TP
.B vqsquish=<0,1>
Specify how to keep the quantizer between qmin and qmax (pass\ 1/\:2).
.PD 0
.RSs
.IPs 0
Use clipping.
.IPs 1
Use a nice differentiable function (default).
.RE
.PD 1
.
.TP
.B vlelim=<-1000\-1000>
Sets single coefficient elimination threshold for luminance.
Negative values will also consider the DC coefficient (should be at least -4
or lower for encoding at quant=1):
.PD 0
.RSs
.IPs 0
disabled (default)
.IPs -4
JVT recommendation
.RE
.PD 1
.
.TP
.B vcelim=<-1000\-1000>
Sets single coefficient elimination threshold for chrominance.
Negative values will also consider the DC coefficient (should be at least -4
or lower for encoding at quant=1):
.PD 0
.RSs
.IPs 0
disabled (default)
.IPs 7
JVT recommendation
.RE
.PD 1
.
.TP
.B vstrict=<-1,0,1>
strict standard compliance
.PD 0
.RSs
.IPs 0
disabled (default)
.IPs 1
Only recommended if you want to feed the output into the
MPEG4 reference decoder.
.IPs -1
Allows non-standard YV12 HuffYUV encoding (20% smaller files, but cannot be
played by the official HuffYUV codec).
.RE
.PD 1
.
.TP
.B vdpart\
Data partitioning.
Adds 2 Bytes per video packet, improves error-resistance when transferring over
unreliable channels (e.g.\& streaming over the internet).
Each video packet will be encoded in 3 separate partitions:
.PD 0
.RSs
.IPs "1. MVs"
movement
.IPs "2. DC coefficients"
low res picture
.IPs "3. AC coefficients"
details
.RE
.PD 1
.RS
MV & DC are most important, loosing them looks far worse than loosing
the AC and the 1. & 2. partition.
(MV & DC) are far smaller than the 3. partition (AC) meaning that errors
will hit the AC partition much more often than the MV & DC partitions.
Thus, the picture will look better with partitioning than without,
as without partitioning an error will trash AC/\:DC/\:MV equally.
.RE
.
.TP
.B vpsize=<0\-10000> (also see vdpart)
Video packet size, improves error-resistance.
.PD 0
.RSs
.IPs 0\ \ \ \
disabled (default)
.IPs 100-1000
good choice
.RE
.PD 1
.
.TP
.B ss\ \ \ \ \
slice structured mode for H.263+
.
.TP
.B gray\ \ \
grayscale only encoding (faster)
.
.TP
.B vfdct=<0\-10>
DCT algorithm
.PD 0
.RSs
.IPs 0
Automatically select a good one (default).
.IPs 1
fast integer
.IPs 2
accurate integer
.IPs 3
MMX
.IPs 4
mlib
.IPs 5
AltiVec
.IPs 6
floating point AAN
.RE
.PD 1
.
.TP
.B idct=<0\-99>
IDCT algorithm
.br
.I NOTE:
To the best of our knowledge all these IDCTs do pass the IEEE1180 tests.
.PD 0
.RSs
.IPs 0
Automatically select a good one (default).
.IPs 1
JPEG reference integer
.IPs 2
simple
.IPs 3
simplemmx
.IPs 4
libmpeg2mmx (inaccurate, do not use for encoding with keyint >100)
.IPs 5
ps2
.IPs 6
mlib
.IPs 7
arm
.IPs 8
AltiVec
.IPs 9
sh4
.RE
.PD 1
.
.TP
.B lumi_mask=<0.0\-1.0>
Luminance masking is a 'psychosensory' setting that is supposed to
make use of the fact that the human eye tends to notice fewer details
in very bright parts of the picture.
Luminance masking compresses bright areas stronger than medium ones,
so it will save bits that can be spent again on other frames, raising
overall subjective quality, while possibly reducing PSNR.
.br
.I WARNING:
Be careful, overly large values can cause disastrous things.
.br
.I WARNING:
Large values might look good on some monitors but may look horrible
on other monitors.
.PD 0
.RSs
.IPs 0.0\ \
disabled (default)
.IPs 0.0\-0.3
sane range
.RE
.PD 1
.
.TP
.B dark_mask=<0.0\-1.0>
Darkness masking is a 'psychosensory' setting that is supposed to
make use of the fact that the human eye tends to notice fewer details
in very dark parts of the picture.
Darkness masking compresses dark areas stronger than medium ones,
so it will save bits that can be spent again on other frames, raising
overall subjective quality, while possibly reducing PSNR.
.br
.I WARNING:
Be careful, overly large values can cause disastrous things.
.br
.I WARNING:
Large values might look good on some monitors but may look horrible
on other monitors / TV / TFT.
.PD 0
.RSs
.IPs 0.0\ \
disabled (default)
.IPs 0.0\-0.3
sane range
.RE
.PD 1
.
.TP
.B tcplx_mask=<0.0\-1.0>
Temporal complexity masking (default: 0.0 (disabled)).
Imagine a scene with a bird flying across the whole scene; tcplx_mask
will raise the quantizers of the bird's macroblocks (thus decreasing their
quality), as the human eye usually does not have time to see all the bird's
details.
Be warned that if the masked object stops (e.g.\& the bird lands) it is
likely to look horrible for a short period of time, until the encoder
figures out that the object is not moving and needs refined blocks.
The saved bits will be spent on other parts of the video, which may increase
subjective quality, provided that tcplx_mask is carefully chosen.
.
.TP
.B scplx_mask=<0.0\-1.0>
Spatial complexity masking.
Larger values help against blockiness, if no deblocking filter is used for
decoding, which is maybe not a good idea.
.br
Imagine a scene with grass (which usually has great spatial complexity),
a blue sky and a house; scplx_mask will raise the quantizers of the grass'
macroblocks, thus decreasing its quality, in order to spend more bits on
the sky and the house.
.br
.I HINT:
Crop any black borders completely as they will reduce the quality
of the macroblocks (also applies without scplx_mask).
.PD 0
.RSs
.IPs 0.0\ \
disabled (default)
.IPs 0.0\-0.5
sane range
.RE
.PD 1
.sp 1
.RS
.I NOTE:
This setting does not have the same effect as using a custom matrix that
would compress high frequencies harder, as scplx_mask will reduce the
quality of P blocks even if only DC is changing.
The result of scplx_mask will probably not look as good.
.RE
.
.TP
.B p_mask=<0.0\-1.0> (also see vi_qfactor)
Reduces the quality of inter blocks.
This is equivalent to increasing the quality of intra blocks, because the
same average bitrate will be distributed by the rate controller to the
whole video sequence (default: 0.0 (disabled)).
p_mask=1.0 doubles the bits allocated to each intra block.
.
.TP
.B naq\ \ \ \
Normalize adaptive quantization (experimental).
When using adaptive quantization (*_mask), the average per-MB quantizer may no
longer match the requested frame-level quantizer.
Naq will attempt to adjust the per-MB quantizers to maintain the proper
average.
.
.TP
.B ildct\ \
Use interlaced DCT.
.
.TP
.B ilme\ \ \
Use interlaced motion estimation (mutually exclusive with qpel).
.
.TP
.B alt\ \ \ \
Use alternative scantable.
.
.TP
.B top=<-1\-1>\ \ \
.PD 0
.RSs
.IPs -1
automatic
.IPs 0
bottom field first
.IPs 1
top field first
.RE
.PD 1
.
.TP
.B format=<value>
.PD 0
.RSs
.IPs YV12\
default
.IPs 444P\
for ffv1
.IPs 422P\
for HuffYUV, lossless JPEG and ffv1
.IPs 411P,YVU9
for lossless JPEG and ffv1
.IPs BGR32
for lossless JPEG and ffv1
.RE
.PD 1
.
.TP
.B pred\ \ \
(for HuffYUV)
.PD 0
.RSs
.IPs 0
left prediction
.IPs 1
plane/\:gradient prediction
.IPs 2
median prediction
.RE
.PD 1
.
.TP
.B pred\ \ \
(for lossless JPEG)
.PD 0
.RSs
.IPs 0
left prediction
.IPs 1
top prediction
.IPs 2
topleft prediction
.IPs 3
plane/\:gradient prediction
.IPs 6
mean prediction
.RE
.PD 1
.
.TP
.B coder\ \
(for ffv1)
.PD 0
.RSs
.IPs 0
vlc coding (Golomb-Rice)
.IPs 1
arithmetic coding (CABAC)
.RE
.PD 1
.
.TP
.B context
(for ffv1)
.PD 0
.RSs
.IPs 0
small context model
.IPs 1
large context model
.RE
.PD 1
.
.TP
.B qpel\ \ \
Use quarter pel motion compensation (mutually exclusive with ilme).
.br
.I HINT:
This seems only useful for high bitrate encodings.
.
.TP
.B mbcmp=<0\-2000>
Sets the comparison function for the macroblock decision, only used if mbd=0.
.PD 0
.RSs
.IPs "0 (SAD)"
sum of absolute differences, fast (default)
.IPs "1 (SSE)"
sum of squared errors
.IPs "2 (SATD)"
sum of absolute Hadamard transformed differences
.IPs "3 (DCT)"
sum of absolute DCT transformed differences
.IPs "4 (PSNR)"
sum of squared quantization errors (avoid, low quality)
.IPs "5 (BIT)"
number of bits needed for the block
.IPs "6 (RD)"
rate distortion optimal, slow
.IPs "7 (ZERO)"
0
.IPs "8 (VSAD)"
sum of absolute vertical differences
.IPs "9 (VSSE)"
sum of squared vertical differences
.IPs "10 (NSSE)"
noise preserving sum of squared differences
.IPs +256\
Also use chroma, currently does not work (correctly) with B-frames.
.RE
.PD 1
.
.TP
.B ildctcmp=<0\-2000>
Sets the comparison function for interlaced DCT decision
(see mbcmp for available comparison functions).
.
.TP
.B precmp=<0\-2000>
Sets the comparison function for motion estimation pre pass
(see mbcmp for available comparison functions) (default: 0).
.
.TP
.B cmp=<0\-2000>
Sets the comparison function for full pel motion estimation
(see mbcmp for available comparison functions) (default: 0).
.
.TP
.B subcmp=<0\-2000>
Sets the comparison function for sub pel motion estimation
(see mbcmp for available comparison functions) (default: 0).
.
.TP
.B nssew=<0\-100>
This setting controls NSSE weight, where larger weights will result in
more noise.
0 NSSE is identical to SSE
You may find this useful if you prefer to keep some noise in your encoded
video rather than filtering it away before encoding.
.
.TP
.B predia=<-99\-6>
diamond type and size for motion estimation pre-pass
.
.TP
.B dia=<-99\-6>
Diamond type & size for motion estimation.
Motion search is an iterative process.
Using a small diamond does not limit the search to finding only small
motion vectors.
It is just somewhat more likely to stop before finding the very best motion
vector, especially when noise is involved.
Bigger diamonds allow a wider search for the best motion vector, thus are
slower but result in better quality.
.br
Big normal diamonds are better quality than shape-adaptive diamonds.
.br
Shape-adaptive diamonds are a good tradeoff between speed and quality.
.br
.I NOTE:
The sizes of the normal diamonds and shape adaptive ones do not have
the same meaning.
.RSs
.IPs -3
shape adaptive (fast) diamond with size 3
.IPs -2
shape adaptive (fast) diamond with size 2
.IPs -1
slightly special: Can be slower and/or better than dia=-2.
.IPs  1
normal size=1 diamond (default) =EPZS type diamond
.nf
.ne
      0
     000
      0
.fi
.IPs 2
normal size=2 diamond
.nf
.ne
      0
     000
    00000
     000
      0
.fi
.RE
.
.TP
.B trell\ \
Trellis searched quantization.
This will find the optimal encoding for each 8x8 block.
Trellis searched quantization is quite simply an optimal quantization in
the PSNR versus bitrate sense (Assuming that there would be no rounding
errors introduced by the IDCT, which is obviously not the case.).
It simply finds a block for the minimum of error and lambda*bits.
.PD 0
.RSs
.IPs lambda
quantization parameter (QP) dependent constant
.IPs bits\
amount of bits needed to encode the block
.IPs error
sum of squared errors of the quantization
.RE
.PD 1
.
.TP
.B cbp\ \ \ \
Rate distorted optimal coded block pattern.
Will select the coded block pattern which minimizes distortion + lambda*rate.
This can only be used together with trellis quantization.
.
.TP
.B mv0\ \ \ \
Try to encode each MB with MV=<0,0> and choose the better one.
This has no effect if mbd=0.
.
.TP
.B qprd (mbd=2 only)
rate distorted optimal quantization parameter (QP) for the given
lambda of each macroblock
.
.TP
.B last_pred=<0\-99>
amount of motion predictors from the previous frame
.PD 0
.RSs
.IPs 0
(default)
.IPs a
Will use 2a+1 x 2a+1 macroblock square of motion vector predictors from the
previous frame.
.RE
.PD 1
.
.TP
.B preme=<0\-2>
motion estimation pre-pass
.PD 0
.RSs
.IPs 0
disabled
.IPs 1
only after I-frames (default)
.IPs 2
always
.RE
.PD 1
.
.TP
.B subq=<1\-8>
subpel refinement quality (for qpel) (default: 8 (high quality))
.br
.I NOTE:
This has a significant effect on speed.
.
.TP
.B psnr\ \ \
print the PSNR (peak signal to noise ratio) for the whole video after encoding
and store the per frame PSNR in a file with a name like 'psnr_hhmmss.log'.
Returned values are in dB (decibel), the higher the better.
.
.TP
.B mpeg_quant
Use MPEG quantizers instead of H.263.
.
.TP
.B aic\ \ \ \
ac prediction (advanced intra prediction for H.263+)
.br
.I NOTE:
vqmin should be 8 or larger for H.263+ AIC.
.
.TP
.B aiv\ \ \ \
alternatice inter vlc for H.263+
.
.TP
.B umv\ \ \ \
unlimited MVs (H.263+ only)
Allows encoding of abritarily long MVs.
.
.TP
.B ibias=<-256\-256>
intra quantizer bias (256 equals 1.0, MPEG style quantizer default: 96,
H.263 style quantizer default: 0)
.br
.I NOTE:
The H.263 MMX quantizer cannot handle positive biases (set vfdct=1 or 2),
the MPEG MMX quantizer cannot handle negative biases (set vfdct=1 or 2).
.
.TP
.B pbias=<-256\-256>
inter quantizer bias (256 equals 1.0, MPEG style quantizer default: 0,
H.263 style quantizer default: -64)
.br
.I NOTE:
The H.263 MMX quantizer cannot handle positive biases (set vfdct=1 or 2),
the MPEG MMX quantizer cannot handle negative biases (set vfdct=1 or 2).
.br
.I HINT:
A more positive bias (-32 \- -16 instead of -64) seems to improve the PSNR.
.
.TP
.B nr=<0\-100000>
Noise reduction, 0 means disabled.
.
.TP
.B qns=<0\-3>
Quantizer noise shaping.
Rather than choosing quantization to most closely match the source video
in the PSNR sense, it chooses quantization such that noise (usually ringing)
will be masked by similar-frequency content in the image.
Larger values are slower but may not result in better quality.
This can and should be used together with trellis quantization, in which case
the trellis quantization (optimal for constant weight) will be used as
startpoint for the iterative search.
.PD 0
.RSs
.IPs 0
disabled (default)
.IPs 1
Only lower the absolute value of coefficients.
.IPs 2
Only change coefficients before the last non-zero coefficient + 1.
.IPs 3
Try all.
.RE
.PD 1
.
.TP
.B inter_matrix=<comma separated matrix>
Use custom inter matrix.
It needs a comma separated string of 64 integers.
.
.TP
.B intra_matrix=<comma separated matrix>
Use custom intra matrix.
It needs a comma separated string of 64 integers.
.
.TP
.B vqmod_amp
experimental quantizer modulation
.
.TP
.B vqmod_freq
experimental quantizer modulation
.
.TP
.B dc\ \ \ \ \
intra DC precision in bits (default: 8).
If you specify vcodec=mpeg2video this value can be 8, 9, 10 or 11.
.
.TP
.B cgop\ \ \
Close all GOPs.
Currently it does not work.
.
.
.SS nuv (\-nuvopts)
.
Nuppel video is based on RTJPEG and LZO.
By default frames are first encoded with RTJPEG and then compressed with LZO,
but it is possible to disable either or both of the two passes.
As a result, you can in fact output raw i420, LZO compressed i420, RTJPEG,
or the default LZO compressed RTJPEG.
.br
.I NOTE:
The nuvrec documentation contains some advice and examples about the
settings to use for the most common TV encodings.
.
.TP
.B c=<0\-20>
chrominance threshold (default: 1)
.
.TP
.B l=<0\-20>
luminance threshold (default: 1)
.
.TP
.B lzo\ \ \ \
Enable LZO compression (default).
.
.TP
.B nolzo\ \
Disable LZO compression.
.
.TP
.B q=<3\-255>
quality level (default: 255)
.
.TP
.B raw \ \ \
Disable RTJPEG encoding.
.
.TP
.B rtjpeg\
Enable RTJPEG encoding (default).
.
.
.SS xvidenc (\-xvidencopts)
.
There are three modes available: constant bitrate (CBR), fixed quantizer and
2pass.
.
.TP
.B pass=<1|2>
Specify the pass in 2pass mode.
.
.TP
.B bitrate=<value>
Sets the bitrate to be used in kbits/\:second if <16000 or in bits/\:second
if >16000.
If <value> is negative, XviD will use its absolute value as the target size
(in kbytes) of the video and compute the associated bitrate automagically.
(CBR or 2pass mode, default: 687 kbits/\:s)
.
.TP
.B fixed_quant=<1\-31>
Switch to fixed quantizer mode and specify the quantizer to be used.
.
.TP
.B me_quality=<0\-6>
This option controls the motion estimation subsystem.
The higher the value, the more precise the estimation should be (default: 6).
The more precise the motion estimation is, the more bits can be saved.
Precision is gained at the expense of CPU time so decrease this setting if
you need realtime encoding.
.
.TP
.B interlacing
Encode the fields of interlaced video material.
Turn this option on for interlaced content.
.br
.I NOTE:
Should you rescale the video, you would need an interlace-aware resizer,
which you can activate with -vf scale=<width>:<height>:1.
.
.TP
.B 4mv\ \ \ \
Use 4 motion vectors per macroblock.
This might give better compression, but slows down encoding.
.br
.I WARNING:
This option is deprecated in XviD-1.0.x, as all is now taken care of
by the me_quality option.
When me_quality > 4, 4mv is activated.
.
.TP
.B rc_reaction_delay_factor=<value>
This parameter controls the number of frames the CBR rate controller
will wait before reacting to bitrate changes and compensating for them
to obtain a constant bitrate over an averaging range of frames.
.
.TP
.B rc_averaging_period=<value>
Real CBR is hard to achieve.
Depending on the video material, bitrate can be variable, and hard to predict.
That's why XviD uses an averaging period for which it guarantees a given
amount of bits (minus a small variation).
This settings expresses the "number of frames" for which XviD averages
bitrate and tries to achieve CBR.
.
.TP
.B rc_buffer=<value>
size of the rate control buffer
.
.TP
.B quant_range=<1\-31>\-<1\-31>[/\:<1\-31>\-<1\-31>]
CBR mode: min & max quantizer for all frames (default: 2\-31)
.br
2pass mode: min & max quantizer for I/\:P-frames (default: 2\-31/\:2\-31)
.br
.I WARNING:
This option is deprecated in XviD-1.0.x, and is replaced by the
[min|max]_[i|p|b]quant options.
.
.TP
.B min_key_interval=<value>
minimum interval between keyframes (default: 0, 2pass only)
.
.TP
.B max_key_interval=<value>
maximum interval between keyframes (default: 10*fps)
.
.TP
.B mpeg_quant
Use MPEG quantizers instead of H.263.
For high bitrates, you will find that MPEG quantization preserves more detail.
For low bitrates, the smoothing of H.263 will give you less block noise.
When using custom matrices, MPEG must be used.
.br
.I WARNING:
This option is deprecated in XviD-1.0.x, and is replaced by the quant_type
option.
.
.TP
.B mod_quant
Decide whether to use MPEG or H.263 quantizers on a frame-by-frame basis
(2pass mode only).
.br
.I WARNING:
This will generate an illegal bitstream, and most likely not be decodable
by any MPEG4 decoder besides libavcodec or XviD.
.br
.I WARNING:
This option is deprecated in XviD-1.0.x.
.
.TP
.B keyframe_boost=<0\-1000>
Shift some bits from the pool for other frame types to intra frames,
thus improving keyframe quality.
(default: 0, 2pass mode only)
.
.TP
.B kfthreshold=<value>
(default: 10, 2pass mode only)
.
.TP
.B kfreduction=<0\-100>
The above two settings can be used to adjust the size of keyframes that
you consider too close to the first (in a row).
kfthreshold sets the range in which keyframes are reduced, and
kfreduction determines the bitrate reduction they get.
The last I-frame will get treated normally.
(default: 30, 2pass mode only)
.
.TP
.B greyscale
Make XviD discard chroma planes so the encoded video is greyscale only.
Note that this does not speed up encoding, it just prevents chroma data
from being written in the last stage of encoding.
.
.TP
.B debug\ \
Save per-frame statistics in ./xvid.dbg. (This is not the 2pass control
file.)
.RE
.
.PP
.sp 1
The following options are only available with the latest stable
releases of XviD 1.0.x (api4).
.
.TP
.B packed\
Create a bitstream which can be decoded delay-free.
.br
.I WARNING:
This will generate an illegal bitstream, and will not be
decodable by ISO-MPEG4 decoders except DivX/\:libavcodec/\:XviD.
.br
.I WARNING:
This will also store a fake DivX version in the file so the bug
autodetection of some decoders might be confused.
.
.TP
.B divx5bvop
Generate DivX5 compatible B-frames (default: on).
.
.TP
.B max_bframes=<0\-4>
Maximum number of B-frames to put between I/\:P-frames (default: 0).
.
.TP
.B bquant_ratio=<0\-1000>
quantizer ratio between B- and non-B-frames, 150=1.50 (default: 150)
.
.TP
.B bquant_offset=<-1000\-1000>
quantizer offset between B- and non-B-frames, 100=1.00 (default: 100)
.
.TP
.B bf_threshold=<-255\-255>
Sometimes B-frames do not look good, and introduce artifacts when most of
the frame is static and some small zones have high motion (in a static
scene with a man talking, his mouth will probably look bad if what is
surrounding the man and his mouth is completely static).
This setting allows you to specify what priority to place on the use of
B-frames.
The higher the value, the higher the probability of B-frames being used.
(default: 0)
.
.TP
.B frame_drop_ratio=<0\-100> (max_bframes=0 only)
This setting allows the creation of variable framerate video streams.
The value of the setting specifies a threshold under which, if the
difference of the following frame to the previous frame is below or equal
to this threshold, a frame gets not coded (a so called n-vop is placed
in the stream).
On playback, when reaching an n-vop the previous frame will be displayed.
.br
.I WARNING:
Playing with this setting may result in a jerky video, so use it at your
own risks!
.
.TP
.B qpel\ \ \
MPEG4 uses a half pixel precision for its motion search by default.
The standard proposes a mode where encoders are allowed to use quarter
pixel precision.
This option usually results in a sharper image.
Unfortunately it has a great impact on bitrate and sometimes the
higher bitrate use will prevent it from giving a better image
quality at a fixed bitrate.
It's better to test with and without this option and see whether it
is worth activating.
.
.TP
.B gmc\ \ \ \
Enable Global Motion Compensation, which makes XviD generate special
frames (GMC-frames) which are well suited for Pan/\:Zoom/\:Rotating images.
Whether or not the use of this option will save bits is highly
dependent on the source material.
.
.TP
.B trellis
Trellis Quantization is a kind of adaptive quantization method that
saves bits by modifying quantized coefficients to make them more
compressible by the entropy encoder.
Its impact on quality is good, and if VHQ uses too much CPU for you,
this setting can be a good alternative to save a few bits (and gain
quality at fixed bitrate) at a lesser cost than with VHQ.
.
.TP
.B cartoon
Activate this if your encoded sequence is an anime/\:cartoon.
It modifies some XviD internal thresholds so XviD takes better decisions on
frame types and motion vectors for flat looking cartoons.
.
.TP
.B quant_type=<h263|mpeg>
Sets the type of quantizer to use.
For high bitrates, you will find that MPEG quantization preserves more detail.
For low bitrates, the smoothing of H.263 will give you less block noise.
When using custom matrices, MPEG quantization must be used.
.
.TP
.B chroma_me
The usual motion estimation algorithm uses only the luminance information to
find the best motion vector.
However for some video material, using the chroma planes can help find
better vectors.
This setting toggles the use of chroma planes for motion estimation.
.
.TP
.B chroma_opt
Enable a chroma optimizer prefilter.
It will do some extra magic on color information to minimize the
stepped-stairs effect on edges.
It will improve quality at the cost of encoding speed.
It reduces PSNR by nature, as the mathematical deviation to the original
picture will get bigger, but the subjective image quality will raise.
Since it works with color information, you might want to turn it off when
encoding in greyscale.
.
.TP
.B hq_ac\ \
Activates High Quality AC coefficient prediction from neighbor blocks.
.
.TP
.B vhq=<0\-4>
The motion search algorithm is based on a search in the usual color domain
and tries to find a motion vector that minimizes the difference between the
reference frame and the encoded frame.
With this setting activated, XviD will also use the frequency domain (DCT)
to search for a motion vector that minimizes not only the spatial
difference but also the encoding length of the block.
Fastest to slowest:
.PD 0
.RSs
.IPs 0
off (default)
.IPs 1
mode decision (inter/\:intra MB)
.IPs 2
limited search
.IPs 3
medium search
.IPs 4
wide search
.RE
.PD 1
.
.TP
.B min_iquant=<0\-31>
minimum I-frame quantizer (default: 2)
.
.TP
.B max_iquant=<0\-31>
maximum I-frame quantizer (default: 31)
.
.TP
.B min_pquant=<0\-31>
minimum P-frame quantizer (default: 2)
.
.TP
.B max_pquant=<0\-31>
maximum P-frame quantizer (default: 31)
.
.TP
.B min_bquant=<0\-31>
minimum B-frame quantizer (default: 2)
.
.TP
.B max_bquant=<0\-31>
maximum B-frame quantizer (default: 31)
.
.TP
.B quant_intra_matrix=<filename>
Load a custom intra matrix file.
You can build such a file with xvid4conf's matrix editor.
.
.TP
.B quant_inter_matrix=<filename>
Load a custom inter matrix file.
You can build such a file with xvid4conf's matrix editor.
.
.TP
.B curve_compression_high=<0\-100>
This setting allows XviD to take a certain percentage of bits away from
high bitrate scenes and give them back to the bit reservoir.
You could also use this if you have a clip with so many bits allocated
to high-bitrate scenes that the low(er)-bitrate scenes start to look bad
(default: 0).
.
.TP
.B curve_compression_low=<0\-100>
This setting allows XviD to give a certain percentage of extra bits to the
low bitrate scenes, taking a few bits from the entire clip.
This might come in handy if you have a few low-bitrate scenes that are
still blocky (default: 0).
.
.TP
.B overflow_control_strength=<0\-100>
During pass 1 of 2-pass encoding, a scaled bitrate curve is computed.
The difference between that expected curve and the result obtained during
encoding is called overflow.
Obviously, the two pass rate controller tries to compensate for that overflow,
distributing it over the next frames.
This setting controls how much of the overflow is distributed every time
there is a new frame.
Low values allow lazy overflow control, big rate bursts are compensated for
more slowly (could lead to lack of precision for small clips).
Higher values will make changes in bit redistribution more abrupt, possibly
too abrupt if you set it too high, creating artifacts (default: 5).
.br
.I NOTE:
This setting impacts quality a lot, play with it carefully!
.
.TP
.B max_overflow_improvement=<0\-100>
During the frame bit allocation, overflow control may increase the frame
size.
This parameter specifies the maximum percentage by which the overflow
control is allowed to increase the frame size, compared to the ideal curve
allocation
(default: 5).
.
.TP
.B max_overflow_degradation=<0\-100>
During the frame bit allocation, overflow control may decrease the frame
size.
This parameter specifies the maximum percentage by which the overflow
control is allowed to decrease the frame size, compared to the ideal curve
allocation
(default: 5).
.
.TP
.B container_frame_overhead=<0...>
Specifies a frame average overhead per frame, in bytes.
Most of the time users express their target bitrate for video w/o taking
care of the video container overhead.
This small but (mostly) constant overhead can cause the target file size
to be exceeded.
XviD allows users to set the amount of overhead per frame the
container generates (give only an average per frame).
0 has a special meaning, it lets XviD use its own default values
(default: 24 - AVI average overhead).
.
.TP
.B par=<mode>
Specifies the Pixel Aspect Ratio mode (not to be confused with DAR,
the Display Aspect Ratio).
PAR is the ratio of the width and height of a single pixel.
So both are related like this: DAR = PAR * (width/height).
.br
MPEG4 defines 5 pixel aspect ratios and one extended
one, giving the opportunity to specify a specific pixel aspect
ratio.
5 standard modes can be specified:
.PD 0
.RSs
.IPs vga11
It's the usual PAR for PC content.
Pixels are a square unit.
.IPs pal43
PAL standard 4:3 PAR.
Pixels are rectangles.
.IPs pal169
same as above
.IPs ntsc43
same as above
.IPs ntsc169
same as above (Don't forget to give the exact ratio.)
.IPs ext\ \
Allows you to specify your own pixel aspect ratio with par_width and
par_height.
.RE
.PD 1
.br
.I NOTE:
In general, setting aspect and autoaspect options is enough.
.
.TP
.B par_width=<1\-255> (par=ext only)
Specifies the width of the custom pixel aspect ratio.
.
.TP
.B par_height=<1\-255> (par=ext only)
Specifies the height of the custom pixel aspect ratio.
.
.TP
.B aspect=<x/\:y | f (float value)>
Store movie aspect internally, just like MPEG files.
Much nicer solution than rescaling, because quality isn't decreased.
MPlayer and a few others players will play these files correctly, others
will display them with the wrong aspect.
The aspect parameter can be given as a ratio or a floating point number.
.
.TP
.B autoaspect
Same as the aspect option, but automatically computes aspect, taking
into account all the adjustments (crop/\:expand/\:scale/\:etc.) made in the
filter chain.
.
.TP
.B psnr\ \ \
Print the PSNR (peak signal to noise ratio) for the whole video after encoding
and store the per frame PSNR in a file with a name like 'psnr_hhmmss.log' in
the current directory.
Returned values are in dB (decibel), the higher the better.
.
.PP
.sp 1
The following option is only available in development versions
of XviD 1.1.x.
.
.TP
.B bvhq=<0|1>
This setting allows vector candidates for B-frames to be used for
the encoding chosen using a rate distortion optimized operator,
which is what is done for P-frames by the vhq option.
This produces nicer-looking B-frames while incurring almost no
performance penalty.
.
.
.SS x264enc (\-x264encopts)
.
.TP
.B bitrate=<value>
Sets the bitrate to be used in kbits/\:second (default: off).
This is required if you want a CBR (constant bitrate) encode.
.
.TP
.B keyint=<value>
Sets maximum interval between I-frames.
Larger values save bits, thus improve quality, at the cost of seeking
precision (default: 250).
.
.TP
.B idrint=<value>
Make each <value> I-frame an IDR-frame (default: 2).
In H.264, I-frames do not necessarily bound a closed GOP because it is
allowable for a P-frame to be predicted from more frames than just the one
frame before it (also see frameref).
Therefore, I-frames are not necessarily seekable.
IDR-frames restrict subsequent P-frames from referring to any frame
prior to the IDR-frame.
.
.TP
.B scenecut=<-1\-100>
Controls how aggressively to insert extra I-frames (default: 40).
With small values of scenecut, the codec often has to force an I-frame
when it would exceed keyint.
Good values of scenecut may find a better location for the I-frame.
Large values use more I-frames than necessary, thus wasting bits.
-1 disables scene-cut detection, so I-frames are inserted only once
every other keyint frames, even if a scene-cut occurs earlier.
This isn't recommended and wastes bitrate as scenecuts encoded as P-frames
are just as big as I-frames, but don't reset the "keyint counter".
.
.TP
.B frameref=<1\-15>
Number of previous frames used as predictors in a P-frame (default: 1).
This is effective in Anime, but seems to make little difference in
live-action source material.
Some decoders are unable to deal with large frameref values.
.
.TP
.B bframes=<0\-16>
number of consecutive B-frames between I- and P-frames (default: 0)
.
.TP
.B deblock | nodeblock
Use deblocking filter (default: on).
As it takes very little time compared to its quality gain, it's not
recommend to disable it.
.
.TP
.B deblockalpha=<-6\-6>
AlphaC0 parameter of deblocking filter (default: 0).
This adjusts thresholds for the H.264 deblocking filter.
First, this parameter adjusts the maximum amount of change that the filter is
allowed to cause on any one pixel.
Secondly, this parameter affects the threshold for difference across the
edge being filtered.
A positive value reduces blocking artifacts more, but will also smear details.
.br
For encodes that are intended to be reasonably high quality, you might
want to turn it down a little bit.
However, if your source material already has some blocking or noise
which you would like to remove, or if it is animation, it may be a good
idea to turn it up a little bit.
.
.TP
.B deblockbeta=<-6\-6>
Beta parameter of deblocking filter (default: 0).
Affects the maximum allowed gradient within two adjacent blocks.
.
.TP
.B cabac | nocabac
Use CABAC (Context-Adaptive Binary Arithmetic Coding) (default: on).
Slightly slows down encoding and decoding, but should save 10-15% bitrate.
Unless you are looking for speed, you should not disable it.
.
.TP
.B cabacidc=<value>
Initial value of CABAC IDC.
The encoder must choose a context for each block it encodes, but for the
first block in a frame, there are no prior blocks to predict the context.
Adjusting this may affect bitrate by a fraction of a percent, but it doesn't
directly affect distortion.
.RSs
-1: Encoder chooses context, usually 0 (default).
.br
0: low complexity
.br
1: medium complexity
.br
2: high complexity
.REss
.
.TP
.B qp_constant=<1\-51>
This selects the quantizer to use.
20\-40 is a useful range (default: 26).
Lower values result in better fidelity, but higher bitrates.
Note that quantization in H.264 works differently from MPEG[124].
H.264's quantization parameter (QP) is on a logarithmic scale.
As an example, the bitrate difference between QP=20 and QP=40
is about a factor of 10.
Useful quantizers in H.264 tend to be very large compared to MPEG[124].
.
.TP
.B qp_min=<1\-51> (CBR or 2 pass)
Minimum quantizer, 15\-35 seems to be a useful range (default: 10).
.
.TP
.B qp_max=<1\-51> (CBR or 2 pass)
maximum quantizer (default: 51)
.
.TP
.B qp_step=<value>
Maximum Value by which the quantizer may be incremented/decremented between
frames.
.
.TP
.B rc_buffer_size=<value>
ratecontrol buffer size (default: 1 second's worth at the bitrate you
specified)
.
.TP
.B rc_init_buffer=<value>
Set the initial ratecontrol buffer (default: 1/4 of rc_buffer_size)
.
.TP
.B rc_sens=<0\-100> (CBR only)
ratecontrol sensitivity (default: 4)
.
.TP
.B ip_factor=<value>
quantizer factor between I- and P-frames (default: 2.0)
.
.TP
.B pb_factor=<value>
quantizer factor between P- and B-frames (default: 2.0)
.
.TP
.B pass=<1\-3>
Enable 2 or 3-pass mode.
It is recommended to always encode in 2 or 3-pass mode as it leads to a
better bit distribution and improves overall quality.
.PD 0
.RSs
.IPs 1
first pass
.IPs 2
second pass
.IPs 3
Nth pass (second and third passes of three pass encoding)
.RE
.RS
Here is how it works, and how to use it:
.br
The first pass (pass=1) collects statistics on the video and writes them
to a file.
You might want to deactivate some CPU-hungry options, apart from the ones
that are on by default.
.br
In two pass mode, the second pass (pass=2) reads the stats file and
bases ratecontrol decisions on it.
.br
In three pass mode, the second pass (pass=3, that is not a typo)
does both: It first reads the stats, then overwrites them.
You might want to backup divx2pass.log before doing this if there is
any possibility that you will have to cancel MEncoder.
You can use all encoding options, except very CPU-hungry options.
.br
The third pass (pass=3) is the same as the second pass, except that it has
the second pass' stats to work from.
You can use all encoding options, including CPU-hungry ones.
.br
.I
NOTE:
x264 three pass support being quite recent in MEncoder, we welcome any
feedback you could give us on good combinations of x264 options that are
both fast and provide good quality.
.REss
.
.TP
.B qcomp=<0\-1>
quantizer compression (default: 0.6).
This affects the ratecontrol: a lower value makes the
bitrate more constant, while a higher value makes the quantization parameter
more constant.
.
.TP
.B qblur=<0\-99>
Temporal blur of the quantization parameter (default: 0.5).
Lower values allow the quantizer value to jump around more,
higher values force it to vary more smoothly.
.
.TP
.B fullinter | nofullinter
Use all available interframe macroblock types (i16x16, i4x4, p16x16,
p16x8, p8x16, p8x8, p8x4, p4x8, p4x4, pskip)
The idea is to find the type and size that best describe a certain area
of the picture, i.e.\& very effective for Anime, which usually contains
large areas of the same color (default: i16x16, i4x4, p16x16-8x8).
Depending on the source material, it can improve or degrade quality, use
it with care.
.
.TP
.B subq=<0\-5>
Adjust subpel refinement quality.
This parameter controls quality versus speed tradeoffs involved in the motion
estimation decision process.
It can improve quality significantly.
.RSs
0: halfpel only
.br
1: 1 iteration of qpel on the winning candidate (default)
.br
2: 2 iterations of qpel on the winning candidate
.br
3: halfpel on all MB types, qpel on the winner
.br
4: qpel on all
.br
5: more iterations of qpel
.REss
.
.TP
.B log=<-1\-3>
Adjust the amount of logging info printed to the screen.
.RSs
-1: none
.br
 0: Print errors only.
.br
 1: warnings
.br
 2: PSNR, encoding times, and other analysis stats when the encode finishes
(default)
.br
 3: PSNR, QP, frametype, size, and other stats for every frame
.REss
.
.TP
.B psnr | nopsnr
Print signal-to-noise ratio statistics.
.br
.I NOTE:
The 'Y', 'U', 'V', and 'Avg' PSNR fields in the summary are not
mathematically sound (they are simply the average of per-frame PSNRs).
They are kept only for comparison to the JM reference codec.
For all other purposes, please use either the 'Global' PSNR, or the per-frame
PSNRs printed by log=3.
.
.
.\" --------------------------------------------------------------------------
.\" Files
.\" --------------------------------------------------------------------------
.
.SH FILES
.
.TP
/usr/\:local/\:etc/\:mplayer/\:mplayer.conf
system-wide settings
.
.TP
~/.mplayer/\:config
user settings
.
.TP
~/.mplayer/\:input.conf
input bindings (see '\-input keylist' for the full list)
.
.TP
~/.mplayer/\:gui.conf
GUI configuration file
.
.TP
~/.mplayer/\:gui.pl
GUI playlist
.
.TP
~/.mplayer/\:font/
font directory (There must be a font.desc file and files with .RAW extension.)
.
.TP
~/.mplayer/\:DVDkeys/
cached CSS keys
.
.TP
Assuming that /path/\:to/\:movie.avi is played, MPlayer searches for sub files
in this order:
.RS
/path/\:to/\:movie.sub
.br
~/.mplayer/\:sub/\:movie.sub
.br
~/.mplayer/\:default.sub
.RE
.PD 1
.
.
.\" --------------------------------------------------------------------------
.\" Examples
.\" --------------------------------------------------------------------------
.
.SH EXAMPLES
.
.TP
.B Quickstart DVD playing:
mplayer dvd://1
.
.TP
.B Play in Japanese with English subtitles:
mplayer dvd://1 \-alang ja \-slang en
.
.TP
.B Play only chapters 5, 6, 7:
mplayer dvd://1 \-chapter 5-7
.
.TP
.B Play only titles 5, 6, 7:
mplayer dvd://5-7
.
.TP
.B Play a multiangle DVD:
mplayer dvd://1 \-dvdangle 2
.
.TP
.B Play from a different DVD device:
mplayer dvd://1 \-dvd-device /dev/\:dvd2
.
.TP
.B Play DVD video from a directory with VOB files:
mplayer dvd://1 \-dvd-device /path/\:to/\:directory/
.
.TP
.B Copy a DVD title to hard disk, saving to file "title1.vob":
mplayer dvd://1 \-dumpstream \-dumpfile title1.vob
.
.TP
.B Stream from HTTP:
mplayer http://mplayer.hq/\:example.avi
.
.TP
.B Stream using RTSP:
mplayer rtsp://server.example.com/\:streamName
.
.TP
.B Convert subtitles to MPsub format:
mplayer dummy.avi \-sub source.sub \-dumpmpsub
.
.TP
.B Convert subtitles to MPsub format without watching the movie:
mplayer /dev/\:zero \-rawvideo on:pal:fps=xx \-vc null \-vo null \-noframedrop
\-benchmark \-sub source.sub \-dumpmpsub
.
.TP
.B input from standard V4L:
mplayer tv:// \-tv driver=v4l:width=640:height=480:outfmt=i420 \-vc rawi420
\-vo xv
.
.TP
.B Playback on Zoran cards (old style, deprecated):
mplayer \-vo zr \-vf scale=352:288 file.avi
.
.TP
.B Playback on Zoran cards (new style):
mplayer \-vo zr2 \-vf scale=352:288,zrmjpeg file.avi
.
.TP
.B Encode DVD title #2, only selected chapters:
mencoder dvd://2 \-chapter 10-15 \-o title2.avi \-oac copy \-ovc lavc
\-lavcopts vcodec=mpeg4
.
.TP
.B Encode DVD title #2, resizing to 640x480:
mencoder dvd://2 \-vf scale=640:480 \-o title2.avi \-oac copy \-ovc lavc
\-lavcopts vcodec=mpeg4
.
.TP
.B Encode DVD title #2, resizing to 512xHHH (keep aspect ratio):
mencoder dvd://2 \-vf scale \-zoom \-xy 512 \-o title2.avi \-oac copy
\-ovc lavc \-lavcopts vcodec=mpeg4
.
.TP
.B The same, but with bitrate set to 1800kBit and optimized macroblocks:
mencoder dvd://2 \-o title2.avi \-oac copy \-ovc lavc
\-lavcopts vcodec=mpeg4:mbd=1:vbitrate=1800
.
.TP
.B The same, but with MJPEG compression:
mencoder dvd://2 \-o titel2.avi \-ovc lavc
\-lavcopts vcodec=mjpeg:mbd=1:vbitrate=1800 \-oac copy
.
.TP
.B Encode all *.jpg files in the current dir:
mencoder "mf://*.jpg" \-mf fps=25 \-o output.avi \-ovc lavc \-lavcopts
vcodec=mpeg4
.
.TP
.B Encode from a tuner (specify a format with \-vf format):
mencoder \-tv driver=v4l:width=640:height=480 tv:// \-o tv.avi \-ovc raw
.
.TP
.B Encode from a pipe:
rar p test-SVCD.rar | mencoder \-ovc lavc \-lavcopts vcodec=mpeg4:vbitrate=800
\-ofps 24 \-
.
.
.\" --------------------------------------------------------------------------
.\" Bugs, authors, standard disclaimer
.\" --------------------------------------------------------------------------
.
.SH BUGS
If you find one, report it to us, but please make sure you have read all
of the documentation first.
Many bugs are the result of incorrect setup or parameter usage.
The bug reporting section of the documentation
(DOCS/\:HTML/\:en/\:bugreports.html)
explains how to create useful bug reports.
.
.
.
.SH AUTHORS
MPlayer was initially written by Arpad Gereöffy.
See the AUTHORS file for a list of some of the many other contributors.
.PP
MPlayer is (C) 2000\-2004 The MPlayer Team
.PP
This man page was written mainly by Gabucino, Jonas Jermann and Diego Biurrun.
It is maintained by Diego Biurrun.
Please send mails about it to the MPlayer-DOCS mailing list.
.\" end of file
author	reimar
date	Thu, 17 Feb 2005 15:35:44 +0000
parents	c7822e66c36f
children	9a5a62f480e6