Mercurial > mplayer.hg
view DOCS/tech/cvs-howto.txt @ 3317:614b4525d275
unistd.h required at least by FreeBSD
author | nexus |
---|---|
date | Tue, 04 Dec 2001 15:49:26 +0000 |
parents | d7bd32263398 |
children | 2618318f988b |
line wrap: on
line source
About CVS write access: by A'rpi ~~~~~~~~~~~~~~~~~~~~~~~ I. TECH SIDE: ============= 1. Changing password: As you probably got a restricted CVS-only shell, it's not trivial: ssh LOGIN@mplayerhq.hu passwd (replace LOGIN with your loginname. leave 'passwd' unchanged, it's command) Note: if you need real shell for something, tell me. 2. Checkout devel. source tree: export CVS_RSH=ssh cvs -z3 -d:ext:LOGIN@mplayerhq.hu:/cvsroot/mplayer co main NOTE: cvs -d:pserver: mode doesn't allow writting, even with password! 3. Commiting changes: cvs -z3 commit -m "comment - what and why did you change" filename(s) Do not use such comments: "bugfix." or "files changed" or "dunno" You don't have to include filename in comment, as comments are linked to files. If you have different comments for files, commit them separated, not at same time. 4. Adding new files/dirs: cvs add filename/dirname 5. Removing files: rm filename cvs remove filename 6. Check changes: cvs -z3 diff -u filename(s) it's recommended to check changes first, before commit. especially if you forget what did you change :) and this way you will see if your patch has debug stuff or indenting change, and you can fix it before commiting and triggering me to use cvs-backup. 7. Check changelog: cvs -z3 log filename(s) 8. Rename/move files: you can NOT do that. ask CVS server admin (A'rpi) to do it! do NOT remove & re-add file - it will kill changelog!!!! If you have any tech problems with cvs server, contact me: A'rpi <arpi@thot.banki.hu> II. POLICY / RULES: =================== 1. You shouldn't commit code which makes cvs broken! (i mean unfinished but enabled code which break compiling or compiles but does not work) 2. You don't have over-test things. if it works for you, and you think it should work for others too, then commit. If it has problems (portability, exploits compiler bugs, unusual environment etc) they will be reported, it's ok. 3. You can commit unfinished stuff (for testing etc), but it must be disabled (#ifdef etc) by default. 4. Do not change behaviour of the program (renaming options etc) without discussing first at the MPlayer-dev-eng list. 5. Source indenting and other cosmetical changes are refused. I'll remove those commits... Every developer has its own indenting style, you shouldn't change it. Of course if you (re)write something then you can use your own style... (Many projects forces a given indenting style - we don't) 6. Always fill out the comment at commiting (-m switch of cvs, or in the editor if you left -m). It shouldn't be such lines: "fixed!" or "Changed it." Describe in a few lines (usually 1 line is enough) what did you changed and why did you that. You can refer mails if bugfix. 7. If you apply patch by someone else, include his name and email in the cvs comment! 8. I've developed something called CVS-Backup. It archives CVS repository after each commit - so I can reverse your commits (without messing up changelog) if they are bad. If you think your bugfix or other change was bad and unneeded, ask me to reverse it instead of commiting previous version! I think our rules aren't too hard. If you have comments, contact me. III. Beginners Guide by David Holm ==================== When I first got CVS write access I got banned after only a few hours because I didn't fully understand this documentation. This part is for those of you who have just got cvs write access and want to avoid the most common pitfalls leading to cvs ban. I will introduce a step-by-step guide explaining how I'm making sure that my cvs commits are proper and won't get me banned. 1. You should set up two dirs for mplayer, one which contains the stable version and has the :ext: option instead of :pserver: in CVS/Root. The other should be your development dir and have the CVS/Root set to :pserver: instead of :ext:, that way you can't commit development code by accident (since only :ext: allows writes). This is my setup: ~/mplayer /main /main.dev NOTE: I'll use these dir names from hereon in the guide, what you want to call your dirs are entirely up to you. This is _only_ an example. 2. When you are satisfied with the changes in "main.dev" and think you are ready to commit the changes to CVS start by doing the following in the "~/mplayer" dir": diff -Nur -x "CVS" -x ".*" main main.dev > dev2stable dev2stable is the filename for the patchfile, it doesn't matter what you call it. 3. Now comes one of the tricky parts, editing the patch. I prefer using mcedit (comes with Midnight Commander) since it does syntax highlighting in patches (= it uses colors to identify lines =), But most ascii editors should do (meaning don't use staroffice and save it as a star office document for instance ;) I will try to explain this as good as I can. Read throught the patch and remove all occurances of: * diff -Nur.... that are affecting files YOU have NOT modified these occur when either main or main.dev are different version (not checked out at the same time) EVERYTHING from the diff -Nur... line until the next diff -Nur... line are changes to the file specified after the diff options, and ONLY that file. * Lines containing "Binary files..." if you add the 'a' switch to -N(a)ur binary files will be added to the patch as well, making it huge and puts alot of unnecessary data in it (since you seldom commit any binaries). * If you find changes within a diff block that you don't want to commit you can delete them if they are the only changes ranging from the @@ -x,y +x,y @@ until the line before the next @@ -x,y +x,y @@. You _cannot_ remove single lines after a @@ -x,y +x,y @@ because that will break the patch!. example: ... @@ -15,34 +15,6 @@ - old_option; + new_option; @@ -65,13 +65,3 @@ ... Ok: ... @@ -65,13 +65,3 @@ ... Will break patch: ... @@ -15,34 +15,6 @@ old_option; @@ -65,13 +65,3 @@ ... When I end up in situation where I have to remove just smoe lines from a block I leave it alone, remember (write down) which file it is in and then edit the file in "main" after I've applied the patch. * Now it's time for applying the patch to the "main" (stable) dir. This should be done in two steps: 1. enter "main" and run "patch -p1 --dry-run < ../dev2stable" -p1 means that you are one level deep (that you have entered the "main" directory and that should be stripped when patching, if you run it from "~/mplayer" you would use -p0). --dry-run means that patch does everything it normally does but without modifying ANY files, this is a great way of testing whether your patch works or not. "../dev2stable" is your patchfile. (don't forget the '<') If the dry run fails check the line it failed on and figure out why it failed, make a new patch, and try again. 2. Ok, you finally have a working patch, remove --dry-run and patch "main" and you are done with the patching part =). 4. It's almost time for the final step, commiting the changes. But first you MUST make sure your changes compiles without breaking anything and that it follows the Policy mentioned in section 2. (Read it until your eyes are bleeding if you want to keep CVS access!) Don't worry about object files etc that will be created in your "main" dir, they won't be sent to CVS on commit, you must use the add command to add new files (discuss it on the list before adding new files!). Now to make sure your additions follow policy do the following on every file you will commit: "cvs -z3 diff -u <filename> > <filename.d> of course the output file (<filename.d>) can have any name you want. This will create a file showing the differences between the file on cvs and your updated local file. I will explain some of the policy rules I had a hard time understanding: 5. This means that if for instance you have lines in <filename.d> that look something like this: - + That means that you have either added or removed a tab or spaces on that line. That qualifies as cosmetical changes and is disallowed. Edit the file and put back/remove the added/removed tab/spaces. Do a new diff on the file and make sure it fixed the cosmetics. 6. Make sure you read and understand this properly before commiting anything. Commit one file at a time! 5. Ok, you have a working patch following the cvs policy, excellent work. Now for the final step, commiting. This is real simple. Just run the following command in "main" for each file you want to commit: "cvs -z3 commit -m "<comment (changes)>" <filename>" or "cvs -z3 commit <filename>" The latter will bring up your default text editor for writing comments (I prefer this method). You are done, congratulations. If you are certain you have followed all the policies you shouldn't have any troubles with CVS maintainers at all. At first I thought the policy was too strict, I discussed it with Arpi and he made some very good points, so don't complain.