view libao2/ao_dxr3.c @ 3639:64ee21b3bd09

Modified the sync code once again, commented out hardware pts sync (I'll likely burn in hell before understanding how to get this bastard to sync well) Added automagic setup of aspect ratio, will remove the "aspect-bug" (I hope). As well as please you rich 16:9 doods ;)

#include <stdio.h>
#include <stdlib.h>

#include <linux/em8300.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

#include "../config.h"

#include "afmt.h"

#include "audio_out.h"
#include "audio_out_internal.h"

void perror( const char *s );
#include <errno.h>
int sys_nerr;
extern int verbose;

static ao_info_t info = 
{
	"DXR3/H+ audio out",
	"dxr3",
	"David Holm <[e-mail]>",
	""
};

LIBAO_EXTERN(dxr3)

static audio_buf_info dxr3_buf_info;
static int fd_control = 0, fd_audio = 0;

// to set/get/query special features/parameters
static int control(int cmd,int arg)
{
    switch(cmd)
    {
	case AOCONTROL_QUERY_FORMAT:
	    return CONTROL_TRUE;
	case AOCONTROL_GET_VOLUME:
	case AOCONTROL_SET_VOLUME:
		return CONTROL_OK;
	return CONTROL_ERROR;
    }
    return CONTROL_UNKNOWN;
}

// open & setup audio device
// return: 1=success 0=fail
static int init(int rate,int channels,int format,int flags)
{
    int ioval;
    fd_audio = open( "/dev/em8300_ma", O_WRONLY );  
    if( fd_audio < 0 )
    {
	printf("AO: [dxr3] Can't open audio device /dev/em8300_ma  -> nosound\n");
	return 0;
    }
  
    fd_control = open( "/dev/em8300", O_WRONLY );
    if( fd_control < 0 )
    {
	printf("AO: [dxr3] Can't open em8300 control /dev/em8300\n");
	return 0;
    }

    ioctl(fd_audio, SNDCTL_DSP_RESET, NULL);
    ao_data.format = format;
    if( ioctl (fd_audio, SNDCTL_DSP_SETFMT, &ao_data.format) < 0 )
	printf( "AO: [dxr3] Unable to set audio format\n" );
    if(format == AFMT_AC3 && ao_data.format != AFMT_AC3) 
    {
	printf("AO: [dxr3] Can't set audio device /dev/em8300_ma to AC3 output\n");
	return 0;
    }
  
    printf("AO: [dxr3] Sample format: %s (requested: %s)\n",
    audio_out_format_name(ao_data.format), audio_out_format_name(format));
  
    ao_data.channels=channels;
    if(format != AFMT_AC3)
	if(channels>2)
	    if( ioctl (fd_audio, SNDCTL_DSP_CHANNELS, &ao_data.channels) < 0 )
		printf( "AO: [dxr3] Unable to set number of channels\n" );
    else
    {
	int c = channels-1;
	if( ioctl(fd_audio,SNDCTL_DSP_STEREO,&c) < 0)
	    printf( "AO: [dxr3] Unable to set number of channels for AC3\n" );
    }
 
    ao_data.bps = channels*rate;
    if(format != AFMT_U8 && format != AFMT_S8)
	ao_data.bps*=2;
    ao_data.samplerate=rate;
    if( ioctl (fd_audio, SNDCTL_DSP_SPEED, &ao_data.samplerate) < 0 )
    {
        printf( "AO: [dxr3] Unable to set samplerate\n" );
        return 0;
    }
    if( rate < ao_data.samplerate )
    {
        ao_data.samplerate = 44100;
        ioctl(fd_audio, SNDCTL_DSP_SPEED, &ao_data.samplerate);
        if( ao_data.samplerate != 44100 )
        {
            printf( "AO: [dxr3] Unable to set samplerate\n" );
            return 0;
        }
        printf("AO: [dxr3] Using %d Hz samplerate (requested: %d) (Upsampling)\n",ao_data.samplerate,rate);
        ao_data.samplerate = rate;
    }
	else printf("AO: [dxr3] Using %d Hz samplerate (requested: %d)\n",ao_data.samplerate,rate);

  if( ioctl(fd_audio, SNDCTL_DSP_GETOSPACE, &dxr3_buf_info)==-1 )
  {
      int r=0;
      printf("AO: [dxr3] Driver doesn't support SNDCTL_DSP_GETOSPACE :-(\n");
      if( ioctl( fd_audio, SNDCTL_DSP_GETBLKSIZE, &r) ==-1 )
      {
          printf( "AO: [dxr3] %d bytes/frag (config.h)\n", ao_data.outburst );
      } 
      else 
      { 
          ao_data.outburst=r;
          printf( "AO: [dxr3] %d bytes/frag (GETBLKSIZE)\n",ao_data.outburst);
      }
  } 
  else 
  {
      printf("AO: [dxr3] frags: %3d/%d  (%d bytes/frag)  free: %6d\n",
          dxr3_buf_info.fragments+1, dxr3_buf_info.fragstotal, dxr3_buf_info.fragsize, dxr3_buf_info.bytes);
      ao_data.buffersize=(dxr3_buf_info.bytes/2);
      ao_data.outburst=dxr3_buf_info.fragsize;
  }

  ioval = EM8300_PLAYMODE_PLAY;
  if( ioctl( fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval ) < 0 )
    printf( "AO: [dxr3] Unable to set playmode\n" );
  close( fd_control );

  return 1;
}

// close audio device
static void uninit()
{
    printf( "AO: [dxr3] Uninitializing\n" );
    if( ioctl(fd_audio, SNDCTL_DSP_RESET, NULL) < 0 )
	printf( "AO: [dxr3] Unable to reset device\n" );
    close( fd_audio );
    close( fd_control ); /* Just in case */
}

// stop playing and empty buffers (for seeking/pause)
static void reset()
{
    if( ioctl(fd_audio, SNDCTL_DSP_RESET, NULL) < 0 )
	printf( "AO: [dxr3] Unable to reset device\n" );
}

// stop playing, keep buffers (for pause)
static void audio_pause()
{
  int ioval;
  reset();
  fd_control = open( "/dev/em8300", O_WRONLY );
  if( fd_control < 0 )
    printf( "AO: [dxr3] Oops, unable to pause playback\n" );
  else
  {
    ioval = EM8300_PLAYMODE_PAUSED;
    if( ioctl( fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval ) < 0 )
	printf( "AO: [dxr3] Unable to pause playback\n" );
    close( fd_control );
  }
}

// resume playing, after audio_pause()
static void audio_resume()
{
  int ioval;
  fd_control = open( "/dev/em8300", O_WRONLY );
  if( fd_control < 0 )
    printf( "AO: [dxr3] Oops, unable to resume playback\n" );
  else
  {
    ioval = EM8300_PLAYMODE_PLAY;
    if( ioctl( fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval ) < 0 )
	printf( "AO: [dxr3] Unable to resume playback\n" );
    close( fd_control );
  }
}

// return: how many bytes can be played without blocking
static int get_space()
{
    int space = 0;
    if( ioctl(fd_audio, SNDCTL_DSP_GETODELAY, &space) < 0 )
    {
        printf( "AO: [dxr3] Unable to get unplayed bytes in buffer\n" );
	return ao_data.outburst;
    }
    space = ao_data.buffersize - space;
    space /= ao_data.outburst; /* This is a smart way of doing a fast modulo reduction */
    space *= ao_data.outburst; /* fetched from ao_mpegpes.c */
    return space;
}

// playes 'len' bytes of 'data'
// upsamples if samplerate < 44100
// return: number of bytes played
static int play(void* data,int len,int flags)
{
    len /= ao_data.outburst;
    return write(fd_audio,data,len*ao_data.outburst);
}

// return: delay in seconds between first and last sample in buffer
static float get_delay()
{
    int r=0;
    if( ioctl(fd_audio, SNDCTL_DSP_GETODELAY, &r) < 0 )
    {
        printf( "AO: [dxr3] Unable to get unplayed bytes in buffer\n" );
	return ((float)ao_data.buffersize)/(float)ao_data.bps;
    }
    return (((float)r)/(float)ao_data.bps);
}