Mercurial > mplayer.hg
view TOOLS/README @ 15090:69402396daef
Consistency run on 'default' and 'see also'.
| author | wight |
|---|---|
| date | Sun, 10 Apr 2005 14:40:53 +0000 |
| parents | d64f41650916 |
| children | e7dcc698718b |
line wrap: on
line source
README for the TOOLS directory ============================== Preamble -------- In this directory you can find some nice scripts and code that makes using MPlayer and MEncoder easier, for example scripts for DVD track encoding in three pass mode or creating SVCDs from a movie. MPlayer scripts in the TOOLS dir -------------------------------- midentify Author: Tobias Diedrich Description: Runs 'mplayer -identify' for all arguments while preventing video window flashing. Usage: midentify file1 [file2 ...] mpconsole Author: Rich Felker Description: Script to run MPlayer on the console (fbdev/mga_vid/etc.) without the console text and/or flashing cursor getting in the way. Usage: mpconsole [mplayer options] mplmult.sh Author: Reimar Döffinger Description: Example how to output video on multiple windows in sync. Might be even more useful in combination with -vo ggi to distribute the video arbitrarily. Usage: mplmult.sh <n> <options> n number of MPlayer instances that display the video options any options you would pass to MPlayer, more than one file will usually not work x2mpsub.sh Author: Gabucino Description: Converts the subtitles in the current directory into MPsub format (subtitles go in ./converted-subtitles/). Usage: x2mpsub.sh mp.pl Author: Felix Bünemann Description: Small helper script that allows to play multiple files with MPlayer. Wildcards are supported. Usage: mp.pl <parameters> <files> Where <parameters> are all possible command line switches for MPlayer and <files> can be either a list of files, like file1 file2 file3 and/or a wildcard definition, like *.avi. example: mp.pl -vo x11 /dvd/VIDEO_TS/VTS_05_*.VOB movie.asf wma2ogg.pl Author: Peter Simon Description: Converts WMA files to Ogg or MP3. Usage: wma2ogg [options] <-f FILE1 | -f FILE2 ... | -a> -f, -file filename -a converts all WMA files in the current directory -t output filetype (ogg, mp3) [default=ogg] -lame I wanna use L.A.M.E. sure enough! -br bitrate (kb/s) [default=from the WMA] -del remove WMA file(s) after the transcoding MEncoder scripts in the TOOLS dir --------------------------------- divx2svcd Author: Miklos Vajna Description: A simple utility that creates an SVCD from a video in an AVI container. Usage: divx2svcd <input_avi> [options] see 'divx2svcd -h' for more info mencvcd Author: Jürgen Hammelmann Description: Converts DVD (or anything else that MPlayer plays) to (S)VCD Usage: mencvcd <basename> [mencvcd options] [mplayer options] see 'mencvcd -h' for more info Note: Requires MPlayer, mjpegtools, VCDImager, cdrdao, and optionally LAME, tooLAME and SoX. dvd2divxscript.pl Author: Florian Schilhabel Description: Yet another DVD to divx helper script. This script encodes a DVD track in three pass mode to MPEG-4 with libavcodec. Optionally it writes the resulting movie file to CD-ROM the corresponding audio track to MP3. It can also shut down the computer when it finishes. If you like, you can watch the MEncoder output on /dev/tty8. Usage: --help show help --abr (AudioBitRate) Please enter the desired bitrate this can be either [96|128|192] kbit/sec (default: 128). --lang Specify the Language of the audio track this can be for example <en> or <de> (default: <de>). --dvd Specify the DVD track you want to encode. --cdsize Specify the size of your CD-ROM (default: 700MB). --shutdown Shutdown the system, when the encoding process has finished. Needs appropriate privileges. --out Specify the name of your encoded movie. The file extension will be appended automatically. --writecd Takes the newly created movie and writes it to a CD-ROM. --writedev cdrecord device identifier, for example 0,1,0 --speed writing speed (default: 4) --dvd-device device to pull the video off (default: /dev/dvd) Tech scripts in the TOOLS dir ----------------------------- fastmem.sh Author: Arpi Description: benchmark/testbed for fastmemcpy stuff Usage: fastmem.sh sws-test Author: Michael Niedermayer Description: Very simple script to generate PNG images from a video with all -sws methods. Usage: sws-test <video-file> <start-pos> <res> example: sws-test abc.avi 10 160:120 calcbpp.pl Author: Moritz Bunkus Description: A script that calculates the $bpp for a movie, mentioned in DOCS/tech/encoding-tips.txt, see that document for more info. Usage: calcbpp.pl <resolution> <aspect ratio> <bitrate> <fps> resolution: the cropped but unscaled resolution (use '-vf cropdetect') aspect ratio: the encoded aspect ratio. All DVDs come at 720x576 but contain a flag that tells the player wether it should display the DVD at an aspect ratio of 4/3 (1.333) or at 16/9 (1.777). Have a look at MPlayer's output - there's something about 'prescaling'. That's what you are looking for. bitrate: the video bitrate in kbit/s fps: the fps example: calcbpp.pl 720x440 16/9 896 25 countquant.pl Author: Moritz Bunkus Description: Counts the quantizers used for the encoding, mentioned in DOCS/tech/encoding-tips.txt, see that document for more info. Usage: countquant.pl < divx2pass.log It will print out which quantizer was used how often. If you see that e.g. the lowest quantizer (vqmin=2) gets used for > 95% of the frames then you can safely increase your picture size. perlbench.pl Author: Felix Bünemann Description: fastmemcpy benchmark script Usage: perlbench.pl plotpsnr.pl Author: Jonas Jermann Description: Draw PSNR log graphs using gnuplot. Usage: plotpsnr.pl [options] <file> -h, --help Display this help message -quant Display quantizers -size Display size -psnr Display PSNR -iframes Display I-frames -pframes Display P-frames -bframes Display B-frames -aframes Display all frames in different colors -cmp <file2> Compare two files -qs <style> Quantizer style -ss <style> Size style -ps <style> PSNR style Default: -quant -size -psnr -qs "p" -ss "i" -ps "p" Note: Requires gnuplot. Comparison is based on file2. Comparison assumes that the frame numbers of both files fit. asfinfo Author: Arpi Description: a simple ASF header display program Usage: asfinfo <filename.asf> Note: Also see MPlayer's -identify option. avi-fix Author: Arpi Description: A simple tool to fix chunk sizes in RIFF AVI files. Usage: avi-fix [-fix] <badfile.avi> Note: It does not check or fix the index, to do this use 'mencoder -forceidx -oac copy -ovc copy'. bios2dump Author: Nick Kurshev Description: Extract your PC BIOS and save it to file. Usage: As argument requires DOS interrupt number in hexadecimal form. As output - will write 64KB file which will named: SSSS_OOOO.intXX where: SSSS - segment of BIOS interrupt handler OOOO - offset of BIOS interrupt handler XX - interrupt number which was passed as argument cpuinfo Author: Jürgen Keil Description: the prototype ../cpuinfo.c Note: Used by configure to emulate /proc/cpuinfo on non-Linux systems. dump_mp4 Author: Arpi Description: MPEG4-ES stream inspector, dumps the stream startcodes. fastmemcpybench Author: Felix Bünemann Description: benchmark/testbed for fastmemcpy stuff Note: Also see fastmem.sh. mem2dump Author: Nick Kurshev Description: Dump memory block to file. Usage: As argument requires absolute address of memory dump and its length (in hexadecimal form). As output - will write file which will be named: memADDR_LEN.dump where: ADDR - given address of memory LEN - given length of memory movinfo Author: Arpi Description: Show QuickTime MOV file structure. Usage: movinfo <filename.mov> png2raw Author: Arpi Description: PNG to RAW image converter, used by .raw font creators. Usage: png2raw <file1> [file2...] vivodump Author: Arpi Description: Dump H.263 frame headers from VIVO files. Usage: vivodump <input_file> <output_file> Miscellaneous scripts in the TOOLS dir -------------------------------------- subedit.pl Author: Michael Klepikov Description: A script for pipelined editing of subtitle files. Usage: subedit.pl [switches] -if,--input-format <fmt> input format; supported: SRT (default: SRT) -of,--output-format <fmt> output format; supported: SRT (default: input format) -s,--shift <time> shift all subtitles by <time> (format: [-]hh:mm:ss,fraction) -c,--scale <time> scale by adding <time> to overall duration -f,--split-from <time> drop subtitles that end before <time> -t,--split-to <time> drop subtitles that start after <time> (will truncate timing if it overlaps a boundary) -r,--renumber renumber SRT subtitles in output -d,--debug enable debug output -h,--help help message w32codec_dl.pl Author: Tom Lees Description: This script will use the Windows Media Player codec download infrastructure to aquire the codecs listed in codecs.conf and put them in a directory named "codecs/" below the current directory. Usage: w32codec_dl.pl <codecs.conf location> Note: You will need the libwww-perl stuff and the cabextract utility which can be found at http://www.kyz.uklinux.net/cabextract.php3. subrip.c Author: Kim Minh Kaplan Description: Transform VOBsub subtitles into Subrip text subtitles using GOCR/JOCR. Usage: subrip <vobsub basename> [subid [output filename] ] Note: Requires at least JOCR/GOCR 0.37. You will have to change the 'vobsub_id' value if you want a subtitle different from number 0. Hint: You can view the subtitle that is being decoded with "display subtitle-*.pgm". alaw-gen.c Author: Arpi Description: Generates alaw/ulaw tables. Note: Created to work around a past license issue, no longer useful.