Mercurial > mplayer.hg
view libvo/vo_dxr3.c @ 6683:6a2c24ce2d9e
10l, evidently killed some lines and missed it when doing cvs diff.
author | atmos4 |
---|---|
date | Tue, 09 Jul 2002 19:40:54 +0000 |
parents | c66284733f3d |
children | c0e8034d47e4 |
line wrap: on
line source
/* * vo_dxr3.c - DXR3/H+ video out * * Copyright (C) 2002 David Holm <dholm@iname.com> * */ /* ChangeLog added 2002-01-10 * 2002-07-05: * Removed lavc and fame encoder to be compatible with new libvo style. * Added graphic equalizer support. * * 2002-04-15: * The spuenc code isn't 100% stable yet, therefore I'm disabling * it due to the upcoming stable release. * * 2002-04-03: * Carl George added spuenc support * * 2002-03-26: * XorA added an option parser and support for selecting encoder * codec. We thank him again. * * 2002-03-25: * A couple of bugfixes by XorA * * 2002-03-23: * Thanks to Marcel Hild <hild@b4mad.net> the jitter-bug experienced * with some videos have been fixed, many thanks goes to him. * * 2002-03-16: * Fixed problems with fame, it gives a better picture than avcodec, * but is slightly slower. Most notably the wobbling effect is gone * with fame. * * 2002-03-13: * Preliminary fame support added (it breaks after seeking, why?) * * 2002-02-18: * Fixed sync problems when pausing video (while using prebuffering) * * 2002-02-16: * Fixed bug which would case invalid output when using :noprebuf * Removed equalization code, it caused problems on slow systems * * 2002-02-13: * Using the swscaler instead of the old hand coded shit. (Checkout man mplayer and search for sws ;). * Using aspect function to setup a proper mpeg1, no more hassling with odd resolutions or GOP-sizes, * this would only create jitter on some vids! * The swscaler sometimes exits with sig8 on mpegs, I don't know why yet (just use -vc mpegpes in this * case, and report to me if you have any avi's etc which does this...) * * 2002-02-09: * Thanks to the new control() method I have finally been able to enable the em8300 prebuffering. * This should speed up playback on all systems, the vout cpu usage should rocket since I will be hogging * the pci bus. Not to worry though, since frames are prebuffered it should be able to take a few blows * if you start doing other stuff simultaneously. * * 2002-02-03: * Removal of libmp1e, libavcodec has finally become faster (and it's code is helluva lot cleaner) * * 2002-02-02: * Cleaned out some old code which might have slowed down writes * * 2002-01-17: * Testrelease of new sync engine (using previously undocumented feature of em8300). * * 2002-01-15: * Preliminary subpic support with -vc mpegpes and dvd's * Device interfaces tries the new naming scheme by default (even though most users probably still use the old one) * * 2002-01-10: * I rehauled the entire codebase. I have now changed to * Kernighan & Ritchie codingstyle, please mail me if you * find any inconcistencies. */ #include <linux/em8300.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/select.h> #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <fcntl.h> #include <stdio.h> #include <time.h> #include "config.h" #include "fastmemcpy.h" #include "video_out.h" #include "video_out_internal.h" #include "aspect.h" #include "cpudetect.h" #include "spuenc.h" #include "../vidix/vidixlib.h" #define SPU_SUPPORT static vo_info_t vo_info = { "DXR3/H+ video out", "dxr3", "David Holm <dholm@iname.com>", "" }; LIBVO_EXTERN (dxr3) /* Resolutions and positions */ static int v_width, v_height; static int s_width, s_height; static int osd_w, osd_h; static int noprebuf = 0; static int img_format = 0; /* File descriptors */ static int fd_control = -1; static int fd_video = -1; static int fd_spu = -1; static char fdv_name[80]; static char fds_name[80]; #ifdef SPU_SUPPORT /* on screen display/subpics */ static char *osdpicbuf = NULL; static int osdpicbuf_w; static int osdpicbuf_h; static int disposd = 0; static encodedata *spued; #endif /* Static variable used in ioctl's */ static int ioval = 0; static int get_video_eq(vidix_video_eq_t *info); static int set_video_eq(vidix_video_eq_t *info); uint32_t control(uint32_t request, void *data, ...) { switch (request) { case VOCTRL_RESUME: if (!noprebuf) { ioval = EM8300_PLAYMODE_PLAY; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { printf("VO: [dxr3] Unable to set playmode!\n"); } } return VO_TRUE; case VOCTRL_PAUSE: if (!noprebuf) { ioval = EM8300_PLAYMODE_PAUSED; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { printf("VO: [dxr3] Unable to set playmode!\n"); } } return VO_TRUE; case VOCTRL_RESET: if (!noprebuf) { close(fd_video); fd_video = open(fdv_name, O_WRONLY); close(fd_spu); fd_spu = open(fds_name, O_WRONLY); fsync(fd_video); fsync(fd_spu); } return VO_TRUE; case VOCTRL_QUERY_FORMAT: { uint32_t flag = 0; if (*((uint32_t*)data) != IMGFMT_MPEGPES) return 0; flag = VFCAP_CSP_SUPPORTED | VFCAP_CSP_SUPPORTED_BY_HW | VFCAP_SPU; if (!noprebuf) flag |= VFCAP_TIMER; return flag; } case VOCTRL_QUERY_VAA: { vo_vaa_t *vaa = data; memset(vaa,0,sizeof(vo_vaa_t)); vaa->get_video_eq=get_video_eq; vaa->set_video_eq=set_video_eq; return VO_TRUE; } } return VO_NOTIMPL; } static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, uint32_t d_height, uint32_t fullscreen, char *title, uint32_t format, const vo_tune_info_t *info) { int tmp1, tmp2, size; em8300_register_t reg; extern float monitor_aspect; /* Softzoom turned on, downscale */ /* This activates the subpicture processor, you can safely disable this and still send */ /* broken subpics to the em8300, if it's enabled and you send broken subpics you will end */ /* up in a lockup */ ioval = EM8300_SPUMODE_ON; if (ioctl(fd_control, EM8300_IOCTL_SET_SPUMODE, &ioval) < 0) { printf("VO: [dxr3] Unable to set subpicture mode!\n"); uninit(); return -1; } /* Set the playmode to play (just in case another app has set it to something else) */ ioval = EM8300_PLAYMODE_PLAY; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { printf("VO: [dxr3] Unable to set playmode!\n"); } /* Start em8300 prebuffering and sync engine */ #ifdef MVCOMMAND_SYNC reg.microcode_register = 1; reg.reg = 0; reg.val = MVCOMMAND_SYNC; ioctl(fd_control, EM8300_IOCTL_WRITEREG, ®); #endif #ifdef EM8300_IOCTL_FLUSH /* Clean buffer by syncing it */ ioval = EM8300_SUBDEVICE_VIDEO; ioctl(fd_control, EM8300_IOCTL_FLUSH, &ioval); ioval = EM8300_SUBDEVICE_AUDIO; ioctl(fd_control, EM8300_IOCTL_FLUSH, &ioval); #endif fsync(fd_video); if (!noprebuf) { ioval = 0x900; ioctl(fd_control, EM8300_IOCTL_SCR_SETSPEED, &ioval); ioval = 0; ioctl(fd_control, EM8300_IOCTL_SCR_SET, &ioval); } /* Store some variables statically that we need later in another scope */ img_format = format; v_width = width; v_height = height; /* Set monitor_aspect to avoid jitter */ monitor_aspect = (float) width / (float) height; /* libavcodec requires a width and height that is x|16 */ aspect_save_orig(width, height); aspect_save_prescale(d_width, d_height); #ifdef EM8300_IOCTL_GET_VIDEOMODE ioctl(fd_control, EM8300_IOCTL_GET_VIDEOMODE, &ioval); if (ioval == EM8300_VIDEOMODE_NTSC) { printf("VO: [dxr3] Setting up for NTSC.\n"); aspect_save_screenres(352, 240); } else { printf("VO: [dxr3] Setting up for PAL/SECAM.\n"); aspect_save_screenres(352, 288); } #endif aspect(&s_width, &s_height, A_ZOOM); s_width -= s_width % 16; s_height -= s_height % 16; /* Try to figure out whether to use widescreen output or not */ /* Anamorphic widescreen modes makes this a pain in the ass */ tmp1 = abs(d_height - ((d_width / 4) * 3)); tmp2 = abs(d_height - (int) (d_width / 2.35)); if (tmp1 < tmp2) { ioval = EM8300_ASPECTRATIO_4_3; printf("VO: [dxr3] Setting aspect ratio to 4:3\n"); } else { ioval = EM8300_ASPECTRATIO_16_9; printf("VO: [dxr3] Setting aspect ratio to 16:9\n"); } ioctl(fd_control, EM8300_IOCTL_SET_ASPECTRATIO, &ioval); #ifdef SPU_SUPPORT osdpicbuf = malloc(s_width * s_height); if (osdpicbuf == NULL) { printf("vo_dxr3: out of mem\n"); return -1; } spued = (encodedata *) malloc(sizeof(encodedata)); if (spued == NULL) { printf("vo_dxr3:out of mem\n"); return -1; } osd_w = s_width; osd_h = s_height; osdpicbuf_w = s_width; osdpicbuf_h = s_height; #endif return 0; } static const vo_info_t* get_info(void) { return &vo_info; } static void draw_alpha(int x, int y, int w, int h, unsigned char* src, unsigned char *srca, int srcstride) { #ifdef SPU_SUPPORT int lx, ly, bx; unsigned char *buf = &osdpicbuf[(y * osdpicbuf_w) + x]; for (ly = 0; ly < h - 1; ly++) { for(lx = 0; lx < w; lx++) { if ((srca[(ly * srcstride) + lx] != 0) && (src[(ly * srcstride) + lx] != 0)) { if(src[(ly * srcstride) + lx] >= 128) { buf[ly * osdpicbuf_w + lx] = 3; } } } } pixbuf_encode_rle(x, y, osdpicbuf_w, osdpicbuf_h - 1, osdpicbuf, osdpicbuf_w, spued); #endif } static void draw_osd(void) { #ifdef SPU_SUPPORT if ((disposd % 15) == 0) { vo_draw_text(osd_w, osd_h, draw_alpha); memset(osdpicbuf, 0, s_width * s_height); /* could stand some check here to see if the subpic hasn't changed * as if it hasn't and we re-send it it will "blink" as the last one * is turned off, and the new one (same one) is turned on */ if (!noprebuf) { ioctl(fd_spu, EM8300_IOCTL_SPU_SETPTS, &vo_pts); } write(fd_spu, spued->data, spued->count); } disposd++; #endif } static uint32_t draw_frame(uint8_t * src[]) { char *pData; int pSize; vo_mpegpes_t *p = (vo_mpegpes_t *) src[0]; #ifdef SPU_SUPPORT if (p->id == 0x20) { if (!noprebuf) { ioctl(fd_spu, EM8300_IOCTL_SPU_SETPTS, &vo_pts); } write(fd_spu, p->data, p->size); } else #endif write(fd_video, p->data, p->size); return 0; } static void flip_page(void) { int size; if (!noprebuf) { ioctl(fd_video, EM8300_IOCTL_VIDEO_SETPTS, &vo_pts); } } static uint32_t draw_slice(uint8_t *srcimg[], int stride[], int w, int h, int x0, int y0) { return -1; } static void uninit(void) { printf("VO: [dxr3] Uninitializing\n"); if (fd_video) { close(fd_video); } if (fd_spu) { close(fd_spu); } if (fd_control) { close(fd_control); } #ifdef SPU_SUPPORT if(osdpicbuf) { free(osdpicbuf); } if(spued) { free(spued); } #endif } static void check_events(void) { } static uint32_t preinit(const char *arg) { char devname[80]; int fdflags = O_WRONLY; CpuCaps cpucaps; GetCpuCaps(&cpucaps); /* Open the control interface */ if (arg && !strncmp("noprebuf", arg, 8)) { printf("VO: [dxr3] Disabling prebuffering.\n"); noprebuf = 1; fdflags |= O_NONBLOCK; arg = strchr(arg, ':'); if (arg) { arg++; } } if (cpucaps.has3DNowExt) { printf("VO: [dxr3] Fast AMD special disabling prebuffering.\n"); noprebuf = 1; fdflags |= O_NONBLOCK; } if (arg && arg[0]) { printf("VO: [dxr3] Forcing use of device %s\n", arg); sprintf(devname, "/dev/em8300-%s", arg); } else { /* Try new naming scheme by default */ sprintf(devname, "/dev/em8300-0"); } fd_control = open(devname, fdflags); if (fd_control < 1) { /* Fall back to old naming scheme */ printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300 instead\n", devname); sprintf(devname, "/dev/em8300"); fd_control = open(devname, fdflags); if (fd_control < 1) { printf("VO: [dxr3] Error opening /dev/em8300 for writing as well!\nBailing\n"); return -1; } } /* Open the video interface */ if (arg && !noprebuf) { sprintf(devname, "/dev/em8300_mv-%s", arg); } else { /* Try new naming scheme by default */ sprintf(devname, "/dev/em8300_mv-0"); } fd_video = open(devname, fdflags); if (fd_video < 0) { /* Fall back to old naming scheme */ printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300_mv instead\n", devname); sprintf(devname, "/dev/em8300_mv"); fd_video = open(devname, fdflags); if (fd_video < 0) { printf("VO: [dxr3] Error opening /dev/em8300_mv for writing as well!\nBailing\n"); uninit(); return -1; } } else { printf("VO: [dxr3] Opened %s\n", devname); } strcpy(fdv_name, devname); /* Open the subpicture interface */ fdflags |= O_NONBLOCK; if (arg && !noprebuf) { sprintf(devname, "/dev/em8300_sp-%s", arg); } else { /* Try new naming scheme by default */ sprintf(devname, "/dev/em8300_sp-0"); } fd_spu = open(devname, fdflags); if (fd_spu < 0) { /* Fall back to old naming scheme */ printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300_sp instead\n", devname); sprintf(devname, "/dev/em8300_sp"); fd_spu = open(devname, fdflags); if (fd_spu < 0) { printf("VO: [dxr3] Error opening /dev/em8300_sp for writing as well!\nBailing\n"); uninit(); return -1; } } strcpy(fds_name, devname); return 0; } static int get_video_eq(vidix_video_eq_t *info) { em8300_bcs_t bcs; if (ioctl(fd_control, EM8300_IOCTL_GETBCS, &bcs) < 0) return 1; info->brightness = bcs.brightness; info->contrast = bcs.contrast; info->saturation = bcs.saturation; info->cap = VEQ_CAP_BRIGHTNESS|VEQ_CAP_CONTRAST|VEQ_CAP_SATURATION; return 0; } static int set_video_eq(vidix_video_eq_t *info) { em8300_bcs_t bcs; if (info->cap & VEQ_CAP_BRIGHTNESS) bcs.brightness = info->brightness; if (info->cap & VEQ_CAP_CONTRAST) bcs.contrast = info->contrast; if (info->cap & VEQ_CAP_SATURATION) bcs.saturation = info->saturation; if (ioctl(fd_control, EM8300_IOCTL_SETBCS, &bcs) < 0) return 1; return 0; }