Mercurial > mplayer.hg
view vidix/drivers/sis_bridge.c @ 20085:6b5e20b52e7a
add gcc-4.x to the list of compilers displayed
when configure detects an unsupported compiler
author | gpoirier |
---|---|
date | Fri, 06 Oct 2006 13:19:06 +0000 |
parents | f580a7755ac5 |
children |
line wrap: on
line source
/** Video bridge detection for SiS 300 and 310/325 series chips. Copyright 2003 Jake Page, Sugar Media. Based on SiS Xv driver: Copyright 2002-2003 by Thomas Winischhofer, Vienna, Austria. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA **/ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include "../../libdha/libdha.h" #include "sis_regs.h" #include "sis_defs.h" static void sis_ddc2_delay(unsigned short delaytime) { unsigned short i; int temp; for (i = 0; i < delaytime; i++) { inSISIDXREG(SISSR, 0x05, temp); } } static int sis_do_sense(int tempbl, int tempbh, int tempcl, int tempch) { int temp; outSISIDXREG(SISPART4, 0x11, tempbl); temp = tempbh | tempcl; setSISIDXREG(SISPART4, 0x10, 0xe0, temp); //usleep(200000); sis_ddc2_delay(0x1000); tempch &= 0x7f; inSISIDXREG(SISPART4, 0x03, temp); temp ^= 0x0e; temp &= tempch; return (temp == tempch); } /* sense connected devices on 30x bridge */ static void sis_sense_30x(void) { unsigned char backupP4_0d, backupP2_00, biosflag; unsigned char testsvhs_tempbl, testsvhs_tempbh; unsigned char testsvhs_tempcl, testsvhs_tempch; unsigned char testcvbs_tempbl, testcvbs_tempbh; unsigned char testcvbs_tempcl, testcvbs_tempch; unsigned char testvga2_tempbl, testvga2_tempbh; unsigned char testvga2_tempcl, testvga2_tempch; int myflag, result = 0, i, j, haveresult; unsigned short temp; inSISIDXREG(SISPART4, 0x0d, backupP4_0d); outSISIDXREG(SISPART4, 0x0d, (backupP4_0d | 0x04)); inSISIDXREG(SISPART2, 0x00, backupP2_00); outSISIDXREG(SISPART2, 0x00, (backupP2_00 | 0x1c)); sis_do_sense(0, 0, 0, 0); if ((sis_vga_engine == SIS_315_VGA) || (sis_device_id == DEVICE_SIS_300)) { #if 0 if (0 /*pSiS->sishw_ext.UseROM */ ) { if (sis_vga_engine == SIS_300_VGA) temp = 0xfe; else { temp = 0xf3; if (sis_device_id == DEVICE_SIS_330) temp = 0x11b; } if (pSiS->BIOS[temp] & 0x08) { if (sis_verbose > 1) { printf ("[SiS] SiS30x: Video bridge has DVI-I TMDS/VGA combo connector\n"); } orSISIDXREG(SISCR, 0x32, 0x80); } else { andSISIDXREG(SISCR, 0x32, 0x7f); } } #endif } if (sis_vga_engine == SIS_300_VGA) { if (0 /*pSiS->sishw_ext.UseROM */ ) { #if 0 testvga2_tempbh = pSiS->BIOS[0xf9]; testvga2_tempbl = pSiS->BIOS[0xf8]; testsvhs_tempbh = pSiS->BIOS[0xfb]; testsvhs_tempbl = pSiS->BIOS[0xfa]; testcvbs_tempbh = pSiS->BIOS[0xfd]; testcvbs_tempbl = pSiS->BIOS[0xfc]; biosflag = pSiS->BIOS[0xfe]; #endif } else { testvga2_tempbh = 0x00; testvga2_tempbl = 0xd1; testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xb9; testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xb3; biosflag = 0; } if (sis_vbflags & (VB_301B | VB_302B | VB_301LV | VB_302LV)) { testvga2_tempbh = 0x01; testvga2_tempbl = 0x90; testsvhs_tempbh = 0x01; testsvhs_tempbl = 0x6b; testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x74; } inSISIDXREG(SISPART4, 0x01, myflag); if (myflag & 0x04) { testvga2_tempbh = 0x00; testvga2_tempbl = 0xfd; testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xdd; testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xee; } testvga2_tempch = 0x0e; testvga2_tempcl = 0x08; testsvhs_tempch = 0x06; testsvhs_tempcl = 0x04; testcvbs_tempch = 0x08; testcvbs_tempcl = 0x04; if (sis_device_id == DEVICE_SIS_300) { inSISIDXREG(SISSR, 0x3b, myflag); if (!(myflag & 0x01)) { testvga2_tempbh = 0x00; testvga2_tempbl = 0x00; testvga2_tempch = 0x00; testvga2_tempcl = 0x00; } } } else { if (0 /*pSiS->sishw_ext.UseROM */ ) { #if 0 if (sis_device_id == DEVICE_SIS_330) { testvga2_tempbh = pSiS->BIOS[0xe6]; testvga2_tempbl = pSiS->BIOS[0xe5]; testsvhs_tempbh = pSiS->BIOS[0xe8]; testsvhs_tempbl = pSiS->BIOS[0xe7]; testcvbs_tempbh = pSiS->BIOS[0xea]; testcvbs_tempbl = pSiS->BIOS[0xe9]; biosflag = pSiS->BIOS[0x11b]; } else { testvga2_tempbh = pSiS->BIOS[0xbe]; testvga2_tempbl = pSiS->BIOS[0xbd]; testsvhs_tempbh = pSiS->BIOS[0xc0]; testsvhs_tempbl = pSiS->BIOS[0xbf]; testcvbs_tempbh = pSiS->BIOS[0xc2]; testcvbs_tempbl = pSiS->BIOS[0xc1]; biosflag = pSiS->BIOS[0xf3]; } #endif } else { testvga2_tempbh = 0x00; testvga2_tempbl = 0xd1; testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xb9; testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xb3; biosflag = 0; } if (sis_vbflags & (VB_301B | VB_302B | VB_301LV | VB_302LV)) { if (0 /*pSiS->sishw_ext.UseROM */ ) { #if 0 if (sis_device_id == DEVICE_SIS_330) { testvga2_tempbh = pSiS->BIOS[0xec]; testvga2_tempbl = pSiS->BIOS[0xeb]; testsvhs_tempbh = pSiS->BIOS[0xee]; testsvhs_tempbl = pSiS->BIOS[0xed]; testcvbs_tempbh = pSiS->BIOS[0xf0]; testcvbs_tempbl = pSiS->BIOS[0xef]; } else { testvga2_tempbh = pSiS->BIOS[0xc4]; testvga2_tempbl = pSiS->BIOS[0xc3]; testsvhs_tempbh = pSiS->BIOS[0xc6]; testsvhs_tempbl = pSiS->BIOS[0xc5]; testcvbs_tempbh = pSiS->BIOS[0xc8]; testcvbs_tempbl = pSiS->BIOS[0xc7]; } #endif } else { if (sis_vbflags & (VB_301B | VB_302B)) { testvga2_tempbh = 0x01; testvga2_tempbl = 0x90; testsvhs_tempbh = 0x01; testsvhs_tempbl = 0x6b; testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x74; } else { testvga2_tempbh = 0x00; testvga2_tempbl = 0x00; testsvhs_tempbh = 0x02; testsvhs_tempbl = 0x00; testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x00; } } } if (sis_vbflags & (VB_301 | VB_301B | VB_302B)) { inSISIDXREG(SISPART4, 0x01, myflag); if (myflag & 0x04) { testvga2_tempbh = 0x00; testvga2_tempbl = 0xfd; testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xdd; testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xee; } } if (sis_vbflags & (VB_301LV | VB_302LV)) { /* TW: No VGA2 or SCART on LV bridges */ testvga2_tempbh = 0x00; testvga2_tempbl = 0x00; testvga2_tempch = 0x00; testvga2_tempcl = 0x00; testsvhs_tempch = 0x04; testsvhs_tempcl = 0x08; testcvbs_tempch = 0x08; testcvbs_tempcl = 0x08; } else { testvga2_tempch = 0x0e; testvga2_tempcl = 0x08; testsvhs_tempch = 0x06; testsvhs_tempcl = 0x04; testcvbs_tempch = 0x08; testcvbs_tempcl = 0x04; } } /* XXX: ?? andSISIDXREG(SISCR, 0x32, ~0x14); */ /* pSiS->postVBCR32 &= ~0x14; */ /* scan for VGA2/SCART */ if (testvga2_tempch || testvga2_tempcl || testvga2_tempbh || testvga2_tempbl) { haveresult = 0; for (j = 0; j < 10; j++) { result = 0; for (i = 0; i < 3; i++) { if (sis_do_sense(testvga2_tempbl, testvga2_tempbh, testvga2_tempcl, testvga2_tempch)) result++; } if ((result == 0) || (result >= 2)) break; } if (result) { if (biosflag & 0x01) { if (sis_verbose > 1) { printf ("[SiS] SiS30x: Detected TV connected to SCART output\n"); } sis_vbflags |= TV_SCART; orSISIDXREG(SISCR, 0x32, 0x04); /*pSiS->postVBCR32 |= 0x04; */ } else { if (sis_verbose > 1) { printf ("[SiS] SiS30x: Detected secondary VGA connection\n"); } sis_vbflags |= VGA2_CONNECTED; orSISIDXREG(SISCR, 0x32, 0x10); /*pSiS->postVBCR32 |= 0x10; */ } } } /* scanning for TV */ /* XXX: ?? andSISIDXREG(SISCR, 0x32, ~0x03); */ /* pSiS->postVBCR32 &= ~0x03; */ result = sis_do_sense(testsvhs_tempbl, testsvhs_tempbh, testsvhs_tempcl, testsvhs_tempch); haveresult = 0; for (j = 0; j < 10; j++) { result = 0; for (i = 0; i < 3; i++) { if (sis_do_sense(testsvhs_tempbl, testsvhs_tempbh, testsvhs_tempcl, testsvhs_tempch)) result++; } if ((result == 0) || (result >= 2)) break; } if (result) { if (sis_verbose > 1) { printf ("[SiS] SiS30x: Detected TV connected to SVIDEO output\n"); } /* TW: So we can be sure that there IS a SVIDEO output */ sis_vbflags |= TV_SVIDEO; orSISIDXREG(SISCR, 0x32, 0x02); //pSiS->postVBCR32 |= 0x02; } if ((biosflag & 0x02) || (!(result))) { haveresult = 0; for (j = 0; j < 10; j++) { result = 0; for (i = 0; i < 3; i++) { if (sis_do_sense(testcvbs_tempbl, testcvbs_tempbh, testcvbs_tempcl, testcvbs_tempch)) result++; } if ((result == 0) || (result >= 2)) break; } if (result) { if (sis_verbose > 1) { printf ("[SiS] SiS30x: Detected TV connected to COMPOSITE output\n"); } sis_vbflags |= TV_AVIDEO; orSISIDXREG(SISCR, 0x32, 0x01); //pSiS->postVBCR32 |= 0x01; } } sis_do_sense(0, 0, 0, 0); outSISIDXREG(SISPART2, 0x00, backupP2_00); outSISIDXREG(SISPART4, 0x0d, backupP4_0d); } static void sis_detect_crt1(void) { unsigned char CR32; unsigned char CRT1Detected = 0; unsigned char OtherDevices = 0; if (!(sis_vbflags & VB_VIDEOBRIDGE)) { sis_crt1_off = 0; return; } inSISIDXREG(SISCR, 0x32, CR32); if (CR32 & 0x20) CRT1Detected = 1; if (CR32 & 0x5F) OtherDevices = 1; if (sis_crt1_off == -1) { if (!CRT1Detected) { /* BIOS detected no CRT1. */ /* If other devices exist, switch it off */ if (OtherDevices) sis_crt1_off = 1; else sis_crt1_off = 0; } else { /* BIOS detected CRT1, leave/switch it on */ sis_crt1_off = 0; } } if (sis_verbose > 0) { printf("[SiS] %sCRT1 connection detected\n", sis_crt1_off ? "No " : ""); } } static void sis_detect_lcd(void) { unsigned char CR32, CR36, CR37; if (!(sis_vbflags & VB_VIDEOBRIDGE)) { return; } inSISIDXREG(SISCR, 0x32, CR32); if (CR32 & 0x08) sis_vbflags |= CRT2_LCD; /* DDC detection of LCD - not supported yet */ /* Get other misc info about LCD - not supported */ } static void sis_detect_tv(void) { unsigned char SR16, SR38, CR32, CR38 = 0, CR79; int temp = 0; if (!(sis_vbflags & VB_VIDEOBRIDGE)) return; inSISIDXREG(SISCR, 0x32, CR32); inSISIDXREG(SISSR, 0x16, SR16); inSISIDXREG(SISSR, 0x38, SR38); switch (sis_vga_engine) { case SIS_300_VGA: if (sis_device_id == DEVICE_SIS_630_VGA) temp = 0x35; break; case SIS_315_VGA: temp = 0x38; break; } if (temp) { inSISIDXREG(SISCR, temp, CR38); } if (CR32 & 0x47) sis_vbflags |= CRT2_TV; if (CR32 & 0x04) sis_vbflags |= TV_SCART; else if (CR32 & 0x02) sis_vbflags |= TV_SVIDEO; else if (CR32 & 0x01) sis_vbflags |= TV_AVIDEO; else if (CR32 & 0x40) sis_vbflags |= (TV_SVIDEO | TV_HIVISION); else if ((CR38 & 0x04) && (sis_vbflags & (VB_301LV | VB_302LV))) sis_vbflags |= TV_HIVISION_LV; else if ((CR38 & 0x04) && (sis_vbflags & VB_CHRONTEL)) sis_vbflags |= (TV_CHSCART | TV_PAL); else if ((CR38 & 0x08) && (sis_vbflags & VB_CHRONTEL)) sis_vbflags |= (TV_CHHDTV | TV_NTSC); if (sis_vbflags & (TV_SCART | TV_SVIDEO | TV_AVIDEO | TV_HIVISION)) { if (sis_vga_engine == SIS_300_VGA) { /* TW: Should be SR38 here as well, but this * does not work. Looks like a BIOS bug (2.04.5c). */ if (SR16 & 0x20) sis_vbflags |= TV_PAL; else sis_vbflags |= TV_NTSC; } else if ((sis_device_id == DEVICE_SIS_550_VGA)) { inSISIDXREG(SISCR, 0x79, CR79); if (CR79 & 0x08) { inSISIDXREG(SISCR, 0x79, CR79); CR79 >>= 5; } if (CR79 & 0x01) { sis_vbflags |= TV_PAL; if (CR38 & 0x40) sis_vbflags |= TV_PALM; else if (CR38 & 0x80) sis_vbflags |= TV_PALN; } else sis_vbflags |= TV_NTSC; } else if ((sis_device_id == DEVICE_SIS_650_VGA)) { inSISIDXREG(SISCR, 0x79, CR79); if (CR79 & 0x20) { sis_vbflags |= TV_PAL; if (CR38 & 0x40) sis_vbflags |= TV_PALM; else if (CR38 & 0x80) sis_vbflags |= TV_PALN; } else sis_vbflags |= TV_NTSC; } else { /* 315, 330 */ if (SR38 & 0x01) { sis_vbflags |= TV_PAL; if (CR38 & 0x40) sis_vbflags |= TV_PALM; else if (CR38 & 0x80) sis_vbflags |= TV_PALN; } else sis_vbflags |= TV_NTSC; } } if (sis_vbflags & (TV_SCART | TV_SVIDEO | TV_AVIDEO | TV_HIVISION | TV_CHSCART | TV_CHHDTV)) { if (sis_verbose > 0) { printf("[SiS] %sTV standard %s\n", (sis_vbflags & (TV_CHSCART | TV_CHHDTV)) ? "Using " : "Detected default ", (sis_vbflags & TV_NTSC) ? ((sis_vbflags & TV_CHHDTV) ? "480i HDTV" : "NTSC") : ((sis_vbflags & TV_PALM) ? "PALM" : ((sis_vbflags & TV_PALN) ? "PALN" : "PAL"))); } } } static void sis_detect_crt2(void) { unsigned char CR32; if (!(sis_vbflags & VB_VIDEOBRIDGE)) return; /* CRT2-VGA not supported on LVDS and 30xLV */ if (sis_vbflags & (VB_LVDS | VB_301LV | VB_302LV)) return; inSISIDXREG(SISCR, 0x32, CR32); if (CR32 & 0x10) sis_vbflags |= CRT2_VGA; #if 0 if (!(pSiS->nocrt2ddcdetection)) { if (sis_vbflags & (VB_301B | VB_302B)) { if (!(sis_vbflags & (CRT2_VGA | CRT2_LCD))) { printf ("[SiS] BIOS detected no secondary VGA, sensing via DDC\n"); if (SiS_SenseVGA2DDC(pSiS->SiS_Pr, pSiS)) { printf ("[SiS] DDC error during secondary VGA detection\n"); } else { inSISIDXREG(SISCR, 0x32, CR32); if (CR32 & 0x10) { sis_vbflags |= CRT2_VGA; /*pSiS->postVBCR32 |= 0x10; */ printf ("[SiS] Detected secondary VGA connection\n"); } else { printf ("[SiS] No secondary VGA connection detected\n"); } } } } } #endif } /* Preinit: detect video bridge and sense connected devs */ static void sis_detect_video_bridge(void) { int temp, temp1, temp2; sis_vbflags = 0; if (sis_vga_engine != SIS_300_VGA && sis_vga_engine != SIS_315_VGA) return; inSISIDXREG(SISPART4, 0x00, temp); temp &= 0x0F; if (temp == 1) { inSISIDXREG(SISPART4, 0x01, temp1); temp1 &= 0xff; if (temp1 >= 0xE0) { sis_vbflags |= VB_302LV; //pSiS->sishw_ext.ujVBChipID = VB_CHIP_302LV; if (sis_verbose > 1) { printf ("[SiS] Detected SiS302LV video bridge (ID 1; Revision 0x%x)\n", temp1); } } else if (temp1 >= 0xD0) { sis_vbflags |= VB_301LV; //pSiS->sishw_ext.ujVBChipID = VB_CHIP_301LV; if (sis_verbose > 1) { printf ("[SiS] Detected SiS301LV video bridge (ID 1; Revision 0x%x)\n", temp1); } } else if (temp1 >= 0xB0) { sis_vbflags |= VB_301B; //pSiS->sishw_ext.ujVBChipID = VB_CHIP_301B; inSISIDXREG(SISPART4, 0x23, temp2); if (!(temp2 & 0x02)) sis_vbflags |= VB_30xBDH; if (sis_verbose > 1) { printf ("[SiS] Detected SiS301B%s video bridge (Revision 0x%x)\n", (temp2 & 0x02) ? "" : " (DH)", temp1); } } else { sis_vbflags |= VB_301; //pSiS->sishw_ext.ujVBChipID = VB_CHIP_301; if (sis_verbose > 1) { printf ("[SiS] Detected SiS301 video bridge (Revision 0x%x)\n", temp1); } } sis_sense_30x(); } else if (temp == 2) { inSISIDXREG(SISPART4, 0x01, temp1); temp1 &= 0xff; if (temp1 >= 0xE0) { sis_vbflags |= VB_302LV; //pSiS->sishw_ext.ujVBChipID = VB_CHIP_302LV; if (sis_verbose > 1) { printf ("[SiS] Detected SiS302LV video bridge (ID 2; Revision 0x%x)\n", temp1); } } else if (temp1 >= 0xD0) { sis_vbflags |= VB_301LV; //pSiS->sishw_ext.ujVBChipID = VB_CHIP_301LV; if (sis_verbose > 1) { printf ("[SiS] Detected SiS301LV video bridge (ID 2; Revision 0x%x)\n", temp1); } } else { sis_vbflags |= VB_302B; //pSiS->sishw_ext.ujVBChipID = VB_CHIP_302B; inSISIDXREG(SISPART4, 0x23, temp2); if (!(temp & 0x02)) sis_vbflags |= VB_30xBDH; if (sis_verbose > 1) { printf ("[SiS] Detected SiS302B%s video bridge (Revision 0x%x)\n", (temp2 & 0x02) ? "" : " (DH)", temp1); } } sis_sense_30x(); } else if (temp == 3) { if (sis_verbose > 1) { printf("[SiS] Detected SiS303 video bridge - not supported\n"); } } else { /* big scary mess of code to handle unknown or Chrontel LVDS */ /* skipping it for now */ if (sis_verbose > 1) { printf ("[SiS] Detected Chrontel video bridge - not supported\n"); } } /* this is probably not relevant to video overlay driver... */ /* detects if brdige uses LCDA for low res text modes */ if (sis_vga_engine == SIS_315_VGA) { if (sis_vbflags & (VB_302B | VB_301LV | VB_302LV)) { #if 0 if (pSiS->sisfblcda != 0xff) { if ((pSiS->sisfblcda & 0x03) == 0x03) { //pSiS->SiS_Pr->SiS_UseLCDA = TRUE; sis_vbflags |= VB_USELCDA; } } else #endif { inSISIDXREG(SISCR, 0x34, temp); if (temp <= 0x13) { inSISIDXREG(SISCR, 0x38, temp); if ((temp & 0x03) == 0x03) { //pSiS->SiS_Pr->SiS_UseLCDA = TRUE; sis_vbflags |= VB_USELCDA; } else { inSISIDXREG(SISCR, 0x30, temp); if (temp & 0x20) { inSISIDXREG(SISPART1, 0x13, temp); if (temp & 0x40) { //pSiS->SiS_Pr->SiS_UseLCDA = TRUE; sis_vbflags |= VB_USELCDA; } } } } } if (sis_vbflags & VB_USELCDA) { /* printf("Bridge uses LCDA for low resolution and text modes\n"); */ } } } } /* detect video bridge type and sense connected devices */ void sis_init_video_bridge(void) { sis_detect_video_bridge(); sis_detect_crt1(); //sis_detect_lcd(); sis_detect_tv(); sis_detect_crt2(); sis_detected_crt2_devices = sis_vbflags & (CRT2_LCD | CRT2_TV | CRT2_VGA); // force crt2 type if (sis_force_crt2_type == CRT2_DEFAULT) { if (sis_vbflags & CRT2_VGA) sis_force_crt2_type = CRT2_VGA; else if (sis_vbflags & CRT2_LCD) sis_force_crt2_type = CRT2_LCD; else if (sis_vbflags & CRT2_TV) sis_force_crt2_type = CRT2_TV; } switch (sis_force_crt2_type) { case CRT2_TV: sis_vbflags = sis_vbflags & ~(CRT2_LCD | CRT2_VGA); if (sis_vbflags & VB_VIDEOBRIDGE) sis_vbflags = sis_vbflags | CRT2_TV; else sis_vbflags = sis_vbflags & ~(CRT2_TV); break; case CRT2_LCD: sis_vbflags = sis_vbflags & ~(CRT2_TV | CRT2_VGA); if ((sis_vbflags & VB_VIDEOBRIDGE) /* XXX: && (pSiS->VBLCDFlags) */ ) sis_vbflags = sis_vbflags | CRT2_LCD; else { sis_vbflags = sis_vbflags & ~(CRT2_LCD); if (sis_verbose > 0) { printf ("[SiS] Can't force CRT2 to LCD, no panel detected\n"); } } break; case CRT2_VGA: if (sis_vbflags & VB_LVDS) { if (sis_verbose > 0) { printf("[SiS] LVDS does not support secondary VGA\n"); } break; } if (sis_vbflags & (VB_301LV | VB_302LV)) { if (sis_verbose > 0) { printf ("[SiS] SiS30xLV bridge does not support secondary VGA\n"); } break; } sis_vbflags = sis_vbflags & ~(CRT2_TV | CRT2_LCD); if (sis_vbflags & VB_VIDEOBRIDGE) sis_vbflags = sis_vbflags | CRT2_VGA; else sis_vbflags = sis_vbflags & ~(CRT2_VGA); break; default: sis_vbflags &= ~(CRT2_TV | CRT2_LCD | CRT2_VGA); } /* CRT2 gamma correction?? */ /* other force modes: */ /* have a 'force tv type' (svideo, composite, scart) option? */ /* have a 'force crt1 type' (to turn it off, etc??) */ /* TW: Check if CRT1 used (or needed; this eg. if no CRT2 detected) */ if (sis_vbflags & VB_VIDEOBRIDGE) { /* TW: No CRT2 output? Then we NEED CRT1! * We also need CRT1 if depth = 8 and bridge=LVDS|630+301B */ if ((!(sis_vbflags & (CRT2_VGA | CRT2_LCD | CRT2_TV))) || ( /*(pScrn->bitsPerPixel == 8) && */ ((sis_vbflags & (VB_LVDS | VB_CHRONTEL)) || ((sis_vga_engine == SIS_300_VGA) && (sis_vbflags & VB_301B))))) { sis_crt1_off = 0; } /* TW: No CRT2 output? Then we can't use hw overlay on CRT2 */ if (!(sis_vbflags & (CRT2_VGA | CRT2_LCD | CRT2_TV))) sis_overlay_on_crt1 = 1; } else { /* TW: no video bridge? */ /* Then we NEED CRT1... */ sis_crt1_off = 0; /* ... and can't use CRT2 for overlay output */ sis_overlay_on_crt1 = 1; } /* tvstandard options ? */ // determine using CRT1 or CRT2? /* -> NO dualhead right now... */ if (sis_vbflags & DISPTYPE_DISP2) { if (sis_crt1_off) { sis_vbflags |= VB_DISPMODE_SINGLE; /* TW: No CRT1? Then we use the video overlay on CRT2 */ sis_overlay_on_crt1 = 0; } else /* TW: CRT1 and CRT2 - mirror or dual head ----- */ sis_vbflags |= (VB_DISPMODE_MIRROR | DISPTYPE_CRT1); } else { /* TW: CRT1 only ------------------------------- */ sis_vbflags |= (VB_DISPMODE_SINGLE | DISPTYPE_CRT1); } if (sis_verbose > 0) { printf("[SiS] Using hardware overlay on CRT%d\n", sis_overlay_on_crt1 ? 1 : 2); } }