view drivers/mga_vid.c @ 18150:710d4bc5f8c9

Using channel count, samplerate and input bps values from the container instead of the decoder breaks some DTS samples where the container says the audio has 6 channels but the decoder gives 2. In this case take the number of channels from the decoder instead, the output will almost certainly be badly garbled anyway if the number of channels is wrong. patch by Uoti Urpala, uoti <<.>> urpala <<@>> pp1 <<.>> inet <<.>> fi
author diego
date Wed, 19 Apr 2006 20:12:01 +0000
parents 6e35326c742f
children 6ab7d3a5efb0
line wrap: on
line source

//#define CRTC2

// YUY2 support (see config.format) added by A'rpi/ESP-team
// double buffering added by A'rpi/ESP-team
// brightness/contrast introduced by eyck
// multiple card support by Attila Kinali <attila@kinali.ch>

// Set this value, if autodetection fails! (video ram size in megabytes)
// #define MGA_MEMORY_SIZE 16

//#define MGA_ALLOW_IRQ

#define MGA_VSYNC_POS 2

/*
 *
 * mga_vid.c
 *
 * Copyright (C) 1999 Aaron Holtzman
 * 
 * Module skeleton based on gutted agpgart module by Jeff Hartmann 
 * <slicer@ionet.net>
 *
 * Matrox MGA G200/G400 YUV Video Interface module Version 0.1.0
 * 
 * BES == Back End Scaler
 * 
 * This software has been released under the terms of the GNU Public
 * license. See http://www.gnu.org/copyleft/gpl.html for details.
 */

//It's entirely possible this major conflicts with something else
//use the 'major' parameter to override the default major number (178)
/* mknod /dev/mga_vid c 178 0 */

#include <linux/config.h>
#include <linux/version.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/errno.h>

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10)
#include <linux/malloc.h>
#else
#include <linux/slab.h>
#endif

#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/init.h>

#include "mga_vid.h"

#ifdef CONFIG_MTRR 
#include <asm/mtrr.h>
#endif

#ifdef CONFIG_DEVFS_FS
#include <linux/devfs_fs_kernel.h>
#endif

#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/io.h>

#define TRUE 1
#define FALSE 0

#define DEFAULT_MGA_VID_MAJOR 178

#ifndef PCI_DEVICE_ID_MATROX_G200_PCI 
#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520
#endif

#ifndef PCI_DEVICE_ID_MATROX_G200_AGP 
#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521
#endif

#ifndef PCI_DEVICE_ID_MATROX_G400 
#define PCI_DEVICE_ID_MATROX_G400 0x0525
#endif

#ifndef PCI_DEVICE_ID_MATROX_G550 
#define PCI_DEVICE_ID_MATROX_G550 0x2527
#endif

#ifndef PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB
#define PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB 0x2159
#endif

#ifndef PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM
#define PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM 0x19d8
#endif

#ifndef PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM
#define PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM 0x0328
#endif

MODULE_AUTHOR("Aaron Holtzman <aholtzma@engr.uvic.ca>");
#ifdef MODULE_LICENSE
MODULE_LICENSE("GPL");
#endif

#define PARAM_BRIGHTNESS "brightness="
#define PARAM_CONTRAST "contrast="
#define PARAM_BLACKIE "blackie="

// set PARAM_BUFF_SIZE to just below 4k because some kernel versions
// store additional information in the memory page which leads to
// the allocation of an additional page if exactly 4k is used
#define PARAM_BUFF_SIZE 4000

#ifndef min
#define min(x,y) (((x)<(y))?(x):(y))
#endif

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)
#include <linux/ctype.h>

static unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base)
{
        unsigned long result = 0,value;

        if (!base) {
                base = 10;
                if (*cp == '0') {
                        base = 8;
                        cp++;
                        if ((*cp == 'x') && isxdigit(cp[1])) {
                                cp++;
                                base = 16;
                        }
                }
        }
        while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp)
            ? toupper(*cp) : *cp)-'A'+10) < base) {
                result = result*base + value;
                cp++;
        }
        if (endp)
                *endp = (char *)cp;
        return result;
}
#endif

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) || LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,5)
static long simple_strtol(const char *cp,char **endp,unsigned int base)
{
        if(*cp=='-')
                return -simple_strtoul(cp+1,endp,base);
        return simple_strtoul(cp,endp,base);
}
#endif


typedef struct bes_registers_s
{
	//BES Control
	uint32_t besctl;
	//BES Global control
	uint32_t besglobctl;
	//Luma control (brightness and contrast)
	uint32_t beslumactl;
	//Line pitch
	uint32_t bespitch;

	//Buffer A-1 Chroma 3 plane org
	uint32_t besa1c3org;
	//Buffer A-1 Chroma org
	uint32_t besa1corg;
	//Buffer A-1 Luma org
	uint32_t besa1org;

	//Buffer A-2 Chroma 3 plane org
	uint32_t besa2c3org;
	//Buffer A-2 Chroma org
	uint32_t besa2corg;
	//Buffer A-2 Luma org
	uint32_t besa2org;

	//Buffer B-1 Chroma 3 plane org
	uint32_t besb1c3org;
	//Buffer B-1 Chroma org
	uint32_t besb1corg;
	//Buffer B-1 Luma org
	uint32_t besb1org;

	//Buffer B-2 Chroma 3 plane org
	uint32_t besb2c3org;
	//Buffer B-2 Chroma org
	uint32_t besb2corg;
	//Buffer B-2 Luma org
	uint32_t besb2org;

	//BES Horizontal coord
	uint32_t beshcoord;
	//BES Horizontal inverse scaling [5.14]
	uint32_t beshiscal;
	//BES Horizontal source start [10.14] (for scaling)
	uint32_t beshsrcst;
	//BES Horizontal source ending [10.14] (for scaling) 
	uint32_t beshsrcend;
	//BES Horizontal source last 
	uint32_t beshsrclst;

	
	//BES Vertical coord
	uint32_t besvcoord;
	//BES Vertical inverse scaling [5.14]
	uint32_t besviscal;
	//BES Field 1 vertical source last position
	uint32_t besv1srclst;
	//BES Field 1 weight start
	uint32_t besv1wght;
	//BES Field 2 vertical source last position
	uint32_t besv2srclst;
	//BES Field 2 weight start
	uint32_t besv2wght;


	//configurable stuff
	int blackie;

} bes_registers_t;

#ifdef CRTC2
typedef struct crtc2_registers_s
{
	uint32_t c2ctl;
	uint32_t c2datactl;
	uint32_t c2misc;
	uint32_t c2hparam;
	uint32_t c2hsync;
	uint32_t c2offset;
	uint32_t c2pl2startadd0;
	uint32_t c2pl2startadd1;
	uint32_t c2pl3startadd0;
	uint32_t c2pl3startadd1;
	uint32_t c2preload;
	uint32_t c2spicstartadd0;
	uint32_t c2spicstartadd1;
	uint32_t c2startadd0;
	uint32_t c2startadd1;
	uint32_t c2subpiclut;
	uint32_t c2vcount;
	uint32_t c2vparam;
	uint32_t c2vsync;
} crtc2_registers_t;
#endif





//All register offsets are converted to word aligned offsets (32 bit)
//because we want all our register accesses to be 32 bits
#define VCOUNT      0x1e20

#define PALWTADD      0x3c00 // Index register for X_DATAREG port
#define X_DATAREG     0x3c0a

#define XMULCTRL      0x19
#define BPP_8         0x00
#define BPP_15        0x01
#define BPP_16        0x02
#define BPP_24        0x03
#define BPP_32_DIR    0x04
#define BPP_32_PAL    0x07

#define XCOLMSK       0x40
#define X_COLKEY      0x42
#define XKEYOPMODE    0x51
#define XCOLMSK0RED   0x52
#define XCOLMSK0GREEN 0x53
#define XCOLMSK0BLUE  0x54
#define XCOLKEY0RED   0x55
#define XCOLKEY0GREEN 0x56
#define XCOLKEY0BLUE  0x57

#ifdef CRTC2

/*CRTC2 registers*/
#define XMISCCTRL  0x1e
#define C2CTL       0x3c10 
#define C2DATACTL   0x3c4c
#define C2MISC      0x3c44
#define C2HPARAM    0x3c14
#define C2HSYNC     0x3c18
#define C2OFFSET    0x3c40
#define C2PL2STARTADD0 0x3c30  // like BESA1CORG
#define C2PL2STARTADD1 0x3c34  // like BESA2CORG
#define C2PL3STARTADD0 0x3c38  // like BESA1C3ORG
#define C2PL3STARTADD1 0x3c3c  // like BESA2C3ORG
#define C2PRELOAD   0x3c24
#define C2SPICSTARTADD0 0x3c54
#define C2SPICSTARTADD1 0x3c58
#define C2STARTADD0 0x3c28  // like BESA1ORG
#define C2STARTADD1 0x3c2c  // like BESA2ORG
#define C2SUBPICLUT 0x3c50
#define C2VCOUNT    0x3c48
#define C2VPARAM    0x3c1c
#define C2VSYNC     0x3c20

#endif

// Backend Scaler registers
#define BESCTL      0x3d20
#define BESGLOBCTL  0x3dc0
#define BESLUMACTL  0x3d40
#define BESPITCH    0x3d24

#define BESA1C3ORG  0x3d60
#define BESA1CORG   0x3d10
#define BESA1ORG    0x3d00

#define BESA2C3ORG  0x3d64 
#define BESA2CORG   0x3d14
#define BESA2ORG    0x3d04

#define BESB1C3ORG  0x3d68
#define BESB1CORG   0x3d18
#define BESB1ORG    0x3d08

#define BESB2C3ORG  0x3d6C
#define BESB2CORG   0x3d1C
#define BESB2ORG    0x3d0C

#define BESHCOORD   0x3d28
#define BESHISCAL   0x3d30
#define BESHSRCEND  0x3d3C
#define BESHSRCLST  0x3d50
#define BESHSRCST   0x3d38
#define BESV1WGHT   0x3d48
#define BESV2WGHT   0x3d4c
#define BESV1SRCLST 0x3d54
#define BESV2SRCLST 0x3d58
#define BESVISCAL   0x3d34
#define BESVCOORD   0x3d2c
#define BESSTATUS   0x3dc4

#define CRTCX	    0x1fd4
#define CRTCD	    0x1fd5
#define	IEN	    0x1e1c
#define ICLEAR	    0x1e18
#define STATUS      0x1e14


// global devfs handle for /dev/mga_vid
#ifdef CONFIG_DEVFS_FS
static devfs_handle_t dev_handle = NULL;
#endif

// card local config
typedef struct mga_card_s {

// local devfs handle for /dev/mga_vidX
#ifdef CONFIG_DEVFS_FS
	devfs_handle_t dev_handle;
#endif

	uint8_t *param_buff; // buffer for read()
	uint32_t param_buff_size;
	uint32_t param_buff_len;
	bes_registers_t regs;
#ifdef CRTC2
	crtc2_registers_t cregs;
#endif
	uint32_t vid_in_use;
	uint32_t is_g400;
	uint32_t vid_src_ready;
	uint32_t vid_overlay_on;

	uint8_t *mmio_base;
	uint32_t mem_base; 
	int src_base;	// YUV buffer position in video memory
	uint32_t ram_size;	// how much megabytes videoram we have
	uint32_t top_reserved;	// reserved space for console font (matroxfb + fastfont)

	int brightness;	// initial brightness
	int contrast;	// initial contrast

	struct pci_dev *pci_dev;

	mga_vid_config_t config; 
	int configured; // set to 1 when the card is configured over ioctl

	int colkey_saved;
	int colkey_on;
	unsigned char colkey_color[4];
	unsigned char colkey_mask[4];

	int irq; // = -1
	int next_frame; 
} mga_card_t;

#define MGA_MAX_CARDS 16
// this is used as init value for the parameter arrays
// it should have exactly MGA_MAX_CARDS elements
#define MGA_MAX_CARDS_INIT_ARRAY {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
static unsigned int mga_cards_num=0;
static mga_card_t * mga_cards[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;

// module parameters
static int major = DEFAULT_MGA_VID_MAJOR;
static int mga_ram_size[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;
static int mga_brightness[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;
static int mga_contrast[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;
static int mga_top_reserved[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;

MODULE_PARM(mga_ram_size, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i");
MODULE_PARM(mga_top_reserved, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i");
MODULE_PARM(mga_brightness, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i");
MODULE_PARM(mga_contrast, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i");
MODULE_PARM(major, "i");

#ifdef CRTC2
static void crtc2_frame_sel(mga_card_t * card, int frame)
{
switch(frame) {
case 0:	
	card->cregs.c2pl2startadd0=card->regs.besa1corg;
	card->cregs.c2pl3startadd0=card->regs.besa1c3org;
	card->cregs.c2startadd0=card->regs.besa1org;
	break;
case 1:
	card->cregs.c2pl2startadd0=card->regs.besa2corg;
	card->cregs.c2pl3startadd0=card->regs.besa2c3org;
	card->cregs.c2startadd0=card->regs.besa2org;
	break;
case 2:
	card->cregs.c2pl2startadd0=card->regs.besb1corg;
	card->cregs.c2pl3startadd0=card->regs.besb1c3org;
	card->cregs.c2startadd0=card->regs.besb1org;
	break;
case 3:
	card->cregs.c2pl2startadd0=card->regs.besb2corg;
	card->cregs.c2pl3startadd0=card->regs.besb2c3org;
	card->cregs.c2startadd0=card->regs.besb2org;
	break;
}
	writel(card->cregs.c2startadd0, card->mmio_base + C2STARTADD0);
	writel(card->cregs.c2pl2startadd0, card->mmio_base + C2PL2STARTADD0);
	writel(card->cregs.c2pl3startadd0, card->mmio_base + C2PL3STARTADD0);
}
#endif

static void mga_vid_frame_sel(mga_card_t * card, int frame)
{
    if ( card->irq != -1 ) {
	card->next_frame=frame;
    } else {

	//we don't need the vcount protection as we're only hitting
	//one register (and it doesn't seem to be double buffered)
	card->regs.besctl = (card->regs.besctl & ~0x07000000) + (frame << 25);
	writel( card->regs.besctl, card->mmio_base + BESCTL ); 

//	writel( card->regs.besglobctl + ((readl(card->mmio_base + VCOUNT)+2)<<16),
	writel( card->regs.besglobctl + (MGA_VSYNC_POS<<16),
			card->mmio_base + BESGLOBCTL);
#ifdef CRTC2
	crtc2_frame_sel(card, frame);
#endif

    }
}


static void mga_vid_write_regs(mga_card_t * card, int restore)
{
	//Make sure internal registers don't get updated until we're done
	writel( (readl(card->mmio_base + VCOUNT)-1)<<16,
			card->mmio_base + BESGLOBCTL);

	// color or coordinate keying
	
	if(restore && card->colkey_saved){
	    // restore it
	    card->colkey_saved=0;

#ifdef MP_DEBUG
		printk("mga_vid: Restoring colorkey (ON: %d  %02X:%02X:%02X)\n",
			card->colkey_on,card->colkey_color[0],card->colkey_color[1],card->colkey_color[2]);
#endif		

		// Set color key registers:
		writeb( XKEYOPMODE, card->mmio_base + PALWTADD);
		writeb( card->colkey_on, card->mmio_base + X_DATAREG);
		
		writeb( XCOLKEY0RED, card->mmio_base + PALWTADD);
		writeb( card->colkey_color[0], card->mmio_base + X_DATAREG);
		writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD);
		writeb( card->colkey_color[1], card->mmio_base + X_DATAREG);
		writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD);
		writeb( card->colkey_color[2], card->mmio_base + X_DATAREG);
		writeb( X_COLKEY, card->mmio_base + PALWTADD);
		writeb( card->colkey_color[3], card->mmio_base + X_DATAREG);

		writeb( XCOLMSK0RED, card->mmio_base + PALWTADD);
		writeb( card->colkey_mask[0], card->mmio_base + X_DATAREG);
		writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD);
		writeb( card->colkey_mask[1], card->mmio_base + X_DATAREG);
		writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD);
		writeb( card->colkey_mask[2], card->mmio_base + X_DATAREG);
		writeb( XCOLMSK, card->mmio_base + PALWTADD);
		writeb( card->colkey_mask[3], card->mmio_base + X_DATAREG);

	} else if(!card->colkey_saved){
	    // save it
	    card->colkey_saved=1;
		// Get color key registers:
		writeb( XKEYOPMODE, card->mmio_base + PALWTADD);
		card->colkey_on=(unsigned char)readb(card->mmio_base + X_DATAREG) & 1;
		
		writeb( XCOLKEY0RED, card->mmio_base + PALWTADD);
		card->colkey_color[0]=(unsigned char)readb(card->mmio_base + X_DATAREG);
		writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD);
		card->colkey_color[1]=(unsigned char)readb(card->mmio_base + X_DATAREG);
		writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD);
		card->colkey_color[2]=(unsigned char)readb(card->mmio_base + X_DATAREG);
		writeb( X_COLKEY, card->mmio_base + PALWTADD);
		card->colkey_color[3]=(unsigned char)readb(card->mmio_base + X_DATAREG);

		writeb( XCOLMSK0RED, card->mmio_base + PALWTADD);
		card->colkey_mask[0]=(unsigned char)readb(card->mmio_base + X_DATAREG);
		writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD);
		card->colkey_mask[1]=(unsigned char)readb(card->mmio_base + X_DATAREG);
		writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD);
		card->colkey_mask[2]=(unsigned char)readb(card->mmio_base + X_DATAREG);
		writeb( XCOLMSK, card->mmio_base + PALWTADD);
		card->colkey_mask[3]=(unsigned char)readb(card->mmio_base + X_DATAREG);

#ifdef MP_DEBUG
		printk("mga_vid: Saved colorkey (ON: %d  %02X:%02X:%02X)\n",
			card->colkey_on, card->colkey_color[0], card->colkey_color[1], card->colkey_color[2]);
#endif		

	}
	
if(!restore){
	writeb( XKEYOPMODE, card->mmio_base + PALWTADD);
	writeb( card->config.colkey_on, card->mmio_base + X_DATAREG);
	if ( card->config.colkey_on ) 
	{
		uint32_t r=0, g=0, b=0;

		writeb( XMULCTRL, card->mmio_base + PALWTADD);
		switch (readb (card->mmio_base + X_DATAREG)) 
		{
			case BPP_8:
				/* Need to look up the color index, just using color 0 for now. */
			break;

			case BPP_15:
				r = card->config.colkey_red   >> 3;
				g = card->config.colkey_green >> 3;
				b = card->config.colkey_blue  >> 3;
			break;

			case BPP_16:
				r = card->config.colkey_red   >> 3;
				g = card->config.colkey_green >> 2;
				b = card->config.colkey_blue  >> 3;
			break;

			case BPP_24:
			case BPP_32_DIR:
			case BPP_32_PAL:
				r = card->config.colkey_red;
				g = card->config.colkey_green;
				b = card->config.colkey_blue;
			break;
		}

		// Disable color keying on alpha channel 
		writeb( XCOLMSK, card->mmio_base + PALWTADD);
		writeb( 0x00, card->mmio_base + X_DATAREG);
		writeb( X_COLKEY, card->mmio_base + PALWTADD);
		writeb( 0x00, card->mmio_base + X_DATAREG);


		// Set up color key registers
		writeb( XCOLKEY0RED, card->mmio_base + PALWTADD);
		writeb( r, card->mmio_base + X_DATAREG);
		writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD);
		writeb( g, card->mmio_base + X_DATAREG);
		writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD);
		writeb( b, card->mmio_base + X_DATAREG);

		// Set up color key mask registers
		writeb( XCOLMSK0RED, card->mmio_base + PALWTADD);
		writeb( 0xff, card->mmio_base + X_DATAREG);
		writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD);
		writeb( 0xff, card->mmio_base + X_DATAREG);
		writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD);
		writeb( 0xff, card->mmio_base + X_DATAREG);
	}

}

	// Backend Scaler
	writel( card->regs.besctl,      card->mmio_base + BESCTL); 
	if(card->is_g400)
		writel( card->regs.beslumactl,  card->mmio_base + BESLUMACTL); 
	writel( card->regs.bespitch,    card->mmio_base + BESPITCH); 

	writel( card->regs.besa1org,    card->mmio_base + BESA1ORG);
	writel( card->regs.besa1corg,   card->mmio_base + BESA1CORG);
	writel( card->regs.besa2org,    card->mmio_base + BESA2ORG);
	writel( card->regs.besa2corg,   card->mmio_base + BESA2CORG);
	writel( card->regs.besb1org,    card->mmio_base + BESB1ORG);
	writel( card->regs.besb1corg,   card->mmio_base + BESB1CORG);
	writel( card->regs.besb2org,    card->mmio_base + BESB2ORG);
	writel( card->regs.besb2corg,   card->mmio_base + BESB2CORG);
	if(card->is_g400) 
	{
		writel( card->regs.besa1c3org,  card->mmio_base + BESA1C3ORG);
		writel( card->regs.besa2c3org,  card->mmio_base + BESA2C3ORG);
		writel( card->regs.besb1c3org,  card->mmio_base + BESB1C3ORG);
		writel( card->regs.besb2c3org,  card->mmio_base + BESB2C3ORG);
	}

	writel( card->regs.beshcoord,   card->mmio_base + BESHCOORD);
	writel( card->regs.beshiscal,   card->mmio_base + BESHISCAL);
	writel( card->regs.beshsrcst,   card->mmio_base + BESHSRCST);
	writel( card->regs.beshsrcend,  card->mmio_base + BESHSRCEND);
	writel( card->regs.beshsrclst,  card->mmio_base + BESHSRCLST);
	
	writel( card->regs.besvcoord,   card->mmio_base + BESVCOORD);
	writel( card->regs.besviscal,   card->mmio_base + BESVISCAL);

	writel( card->regs.besv1srclst, card->mmio_base + BESV1SRCLST);
	writel( card->regs.besv1wght,   card->mmio_base + BESV1WGHT);
	writel( card->regs.besv2srclst, card->mmio_base + BESV2SRCLST);
	writel( card->regs.besv2wght,   card->mmio_base + BESV2WGHT);
	
	//update the registers somewhere between 1 and 2 frames from now.
	writel( card->regs.besglobctl + ((readl(card->mmio_base + VCOUNT)+2)<<16),
			card->mmio_base + BESGLOBCTL);

#if 0
	printk(KERN_DEBUG "mga_vid: wrote BES registers\n");
	printk(KERN_DEBUG "mga_vid: BESCTL = 0x%08x\n",
			readl(card->mmio_base + BESCTL));
	printk(KERN_DEBUG "mga_vid: BESGLOBCTL = 0x%08x\n",
			readl(card->mmio_base + BESGLOBCTL));
	printk(KERN_DEBUG "mga_vid: BESSTATUS= 0x%08x\n",
			readl(card->mmio_base + BESSTATUS));
#endif
#ifdef CRTC2
//	printk("c2ctl:0x%08x c2datactl:0x%08x\n", readl(card->mmio_base + C2CTL), readl(card->mmio_base + C2DATACTL));
//	printk("c2misc:0x%08x\n", readl(card->mmio_base + C2MISC));
//	printk("c2ctl:0x%08x c2datactl:0x%08x\n", card->cregs.c2ctl, card->cregs.c2datactl);

//	writel(card->cregs.c2ctl,	card->mmio_base + C2CTL);

	writel(((readl(card->mmio_base + C2CTL) & ~0x03e00000) + (card->cregs.c2ctl & 0x03e00000)), card->mmio_base + C2CTL);
	writel(((readl(card->mmio_base + C2DATACTL) & ~0x000000ff) + (card->cregs.c2datactl & 0x000000ff)), card->mmio_base + C2DATACTL);
	// ctrc2
	// disable CRTC2 acording to specs
//	writel(card->cregs.c2ctl & 0xfffffff0, card->mmio_base + C2CTL);
 // je to treba ???
//	writeb((readb(card->mmio_base + XMISCCTRL) & 0x19) | 0xa2, card->mmio_base + XMISCCTRL); // MAFC - mfcsel & vdoutsel
//	writeb((readb(card->mmio_base + XMISCCTRL) & 0x19) | 0x92, card->mmio_base + XMISCCTRL);
//	writeb((readb(card->mmio_base + XMISCCTRL) & ~0xe9) + 0xa2, card->mmio_base + XMISCCTRL);
//	writel(card->cregs.c2datactl, card->mmio_base + C2DATACTL);
//	writel(card->cregs.c2hparam, card->mmio_base + C2HPARAM);
//	writel(card->cregs.c2hsync, card->mmio_base + C2HSYNC);
//	writel(card->cregs.c2vparam, card->mmio_base + C2VPARAM);
//	writel(card->cregs.c2vsync, card->mmio_base + C2VSYNC);
	writel(card->cregs.c2misc, card->mmio_base + C2MISC);

#ifdef MP_DEBUG
	printk("c2offset = %d\n",card->cregs.c2offset);
#endif	

	writel(card->cregs.c2offset, card->mmio_base + C2OFFSET);
	writel(card->cregs.c2startadd0, card->mmio_base + C2STARTADD0);
//	writel(card->cregs.c2startadd1, card->mmio_base + C2STARTADD1);
	writel(card->cregs.c2pl2startadd0, card->mmio_base + C2PL2STARTADD0);
//	writel(card->cregs.c2pl2startadd1, card->mmio_base + C2PL2STARTADD1);
	writel(card->cregs.c2pl3startadd0, card->mmio_base + C2PL3STARTADD0);
//	writel(card->cregs.c2pl3startadd1, card->mmio_base + C2PL3STARTADD1);
	writel(card->cregs.c2spicstartadd0, card->mmio_base + C2SPICSTARTADD0);
//	writel(card->cregs.c2spicstartadd1, card->mmio_base + C2SPICSTARTADD1);
//	writel(card->cregs.c2subpiclut, card->mmio_base + C2SUBPICLUT);
//	writel(card->cregs.c2preload, card->mmio_base + C2PRELOAD);
	// finaly enable everything
//	writel(card->cregs.c2ctl,	card->mmio_base + C2CTL);
//	printk("c2ctl:0x%08x c2datactl:0x%08x\n",readl(card->mmio_base + C2CTL),readl(card->mmio_base + C2DATACTL));
//	printk("c2misc:0x%08x\n", readl(card->mmio_base + C2MISC));
#endif	
}

static int mga_vid_set_config(mga_card_t * card)
{
	int x, y, sw, sh, dw, dh;
	int besleft, bestop, ifactor, ofsleft, ofstop, baseadrofs, weight, weights;
	mga_vid_config_t *config = &card->config;
	int frame_size = card->config.frame_size;

#ifdef CRTC2
#define right_margin 0
#define left_margin 18
#define hsync_len 46
#define lower_margin 10
#define vsync_len 4
#define upper_margin 39

	unsigned int hdispend = (config->src_width + 31) & ~31;
	unsigned int hsyncstart = hdispend + (right_margin & ~7);
	unsigned int hsyncend = hsyncstart + (hsync_len & ~7);
	unsigned int htotal = hsyncend + (left_margin & ~7);
	unsigned int vdispend = config->src_height;
	unsigned int vsyncstart = vdispend + lower_margin;
	unsigned int vsyncend = vsyncstart + vsync_len;
	unsigned int vtotal = vsyncend + upper_margin;
#endif 
	x = config->x_org;
	y = config->y_org;
	sw = config->src_width;
	sh = config->src_height;
	dw = config->dest_width;
	dh = config->dest_height;

#ifdef MP_DEBUG
	printk(KERN_DEBUG "mga_vid: Setting up a %dx%d+%d+%d video window (src %dx%d) format %X\n",
	       dw, dh, x, y, sw, sh, config->format);
#endif	

	if(sw<4 || sh<4 || dw<4 || dh<4){
	    printk(KERN_ERR "mga_vid: Invalid src/dest dimenstions\n");
	    return -1;
	}

	//FIXME check that window is valid and inside desktop
	
	//Setup the BES registers for a three plane 4:2:0 video source 

	card->regs.besglobctl = 0;

switch(config->format){
    case MGA_VID_FORMAT_YV12:	
    case MGA_VID_FORMAT_I420:	
    case MGA_VID_FORMAT_IYUV:	
	card->regs.besctl = 1   // BES enabled
                    + (0<<6)    // even start polarity
                    + (1<<10)   // x filtering enabled
                    + (1<<11)   // y filtering enabled
                    + (1<<16)   // chroma upsampling
                    + (1<<17)   // 4:2:0 mode
                    + (1<<18);  // dither enabled
#if 0
	if(card->is_g400)
	{
		//zoom disabled, zoom filter disabled, 420 3 plane format, proc amp
		//disabled, rgb mode disabled 
		card->regs.besglobctl = (1<<5);
	}
	else
	{
		//zoom disabled, zoom filter disabled, Cb samples in 0246, Cr
		//in 1357, BES register update on besvcnt
	        card->regs.besglobctl = 0;
	}
#endif
        break;

    case MGA_VID_FORMAT_YUY2:	
	card->regs.besctl = 1   // BES enabled
                    + (0<<6)    // even start polarity
                    + (1<<10)   // x filtering enabled
                    + (1<<11)   // y filtering enabled
                    + (1<<16)   // chroma upsampling
                    + (0<<17)   // 4:2:2 mode
                    + (1<<18);  // dither enabled

	card->regs.besglobctl = 0;        // YUY2 format selected
        break;

    case MGA_VID_FORMAT_UYVY:	
	card->regs.besctl = 1   // BES enabled
                    + (0<<6)    // even start polarity
                    + (1<<10)   // x filtering enabled
                    + (1<<11)   // y filtering enabled
                    + (1<<16)   // chroma upsampling
                    + (0<<17)   // 4:2:2 mode
                    + (1<<18);  // dither enabled

	card->regs.besglobctl = 1<<6;        // UYVY format selected
        break;

    default:
	printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format);
	return -1;
}

	// setting black&white mode 
	card->regs.besctl|=(card->regs.blackie<<20); 

	//Enable contrast and brightness control
	card->regs.besglobctl |= (1<<5) + (1<<7);
	
	// brightness (-128..127) && contrast (0..255)
	card->regs.beslumactl = (card->brightness << 16) | ((card->contrast+0x80)&0xFFFF);

	//Setup destination window boundaries
	besleft = x > 0 ? x : 0;
	bestop = y > 0 ? y : 0;
	card->regs.beshcoord = (besleft<<16) + (x + dw-1);
	card->regs.besvcoord = (bestop<<16) + (y + dh-1);
	
	//Setup source dimensions
	card->regs.beshsrclst  = (sw - 1) << 16;
	card->regs.bespitch = (sw + 31) & ~31 ; 
	
	//Setup horizontal scaling
	ifactor = ((sw-1)<<14)/(dw-1);
	ofsleft = besleft - x;
		
	card->regs.beshiscal = ifactor<<2;
	card->regs.beshsrcst = (ofsleft*ifactor)<<2;
	card->regs.beshsrcend = card->regs.beshsrcst + (((dw - ofsleft - 1) * ifactor) << 2);
	
	//Setup vertical scaling
	ifactor = ((sh-1)<<14)/(dh-1);
	ofstop = bestop - y;

	card->regs.besviscal = ifactor<<2;

	baseadrofs = ( (ofstop * card->regs.besviscal) >>16) * card->regs.bespitch;
	//frame_size = ((sw + 31) & ~31) * sh + (((sw + 31) & ~31) * sh) / 2;
	card->regs.besa1org = (uint32_t) card->src_base + baseadrofs;
	card->regs.besa2org = (uint32_t) card->src_base + baseadrofs + 1*frame_size;
	card->regs.besb1org = (uint32_t) card->src_base + baseadrofs + 2*frame_size;
	card->regs.besb2org = (uint32_t) card->src_base + baseadrofs + 3*frame_size;

if(config->format==MGA_VID_FORMAT_YV12
 ||config->format==MGA_VID_FORMAT_IYUV
 ||config->format==MGA_VID_FORMAT_I420
 ){
        // planar YUV frames:
	if (card->is_g400) 
		baseadrofs = ( ( (ofstop * card->regs.besviscal ) / 4 ) >> 16 ) * card->regs.bespitch;
	else 
		baseadrofs = ( ( ( ofstop * card->regs.besviscal ) / 2 ) >> 16 ) * card->regs.bespitch;

    if(config->format==MGA_VID_FORMAT_YV12 || !card->is_g400){
	card->regs.besa1corg = (uint32_t) card->src_base + baseadrofs + card->regs.bespitch * sh ;
	card->regs.besa2corg = (uint32_t) card->src_base + baseadrofs + 1*frame_size + card->regs.bespitch * sh;
	card->regs.besb1corg = (uint32_t) card->src_base + baseadrofs + 2*frame_size + card->regs.bespitch * sh;
	card->regs.besb2corg = (uint32_t) card->src_base + baseadrofs + 3*frame_size + card->regs.bespitch * sh;
	card->regs.besa1c3org = card->regs.besa1corg + ( (card->regs.bespitch * sh) / 4);
	card->regs.besa2c3org = card->regs.besa2corg + ( (card->regs.bespitch * sh) / 4);
	card->regs.besb1c3org = card->regs.besb1corg + ( (card->regs.bespitch * sh) / 4);
	card->regs.besb2c3org = card->regs.besb2corg + ( (card->regs.bespitch * sh) / 4);
    } else {
	card->regs.besa1c3org = (uint32_t) card->src_base + baseadrofs + card->regs.bespitch * sh ;
	card->regs.besa2c3org = (uint32_t) card->src_base + baseadrofs + 1*frame_size + card->regs.bespitch * sh;
	card->regs.besb1c3org = (uint32_t) card->src_base + baseadrofs + 2*frame_size + card->regs.bespitch * sh;
	card->regs.besb2c3org = (uint32_t) card->src_base + baseadrofs + 3*frame_size + card->regs.bespitch * sh;
	card->regs.besa1corg = card->regs.besa1c3org + ((card->regs.bespitch * sh) / 4);
	card->regs.besa2corg = card->regs.besa2c3org + ((card->regs.bespitch * sh) / 4);
	card->regs.besb1corg = card->regs.besb1c3org + ((card->regs.bespitch * sh) / 4);
	card->regs.besb2corg = card->regs.besb2c3org + ((card->regs.bespitch * sh) / 4);
    }

}

	weight = ofstop * (card->regs.besviscal >> 2);
	weights = weight < 0 ? 1 : 0;
	card->regs.besv2wght = card->regs.besv1wght = (weights << 16) + ((weight & 0x3FFF) << 2);
	card->regs.besv2srclst = card->regs.besv1srclst = sh - 1 - (((ofstop * card->regs.besviscal) >> 16) & 0x03FF);

#ifdef CRTC2
	// pridat hlavni registry - tj. casovani ...


switch(config->format){
    case MGA_VID_FORMAT_YV12:	
    case MGA_VID_FORMAT_I420:	
    case MGA_VID_FORMAT_IYUV:	
	card->cregs.c2ctl = 1   // CRTC2 enabled
		    + (1<<1)	// external clock
		    + (0<<2)	// external clock
		    + (1<<3)	// pixel clock enable - not needed ???
		    + (0<<4)	// high prioryty req
		    + (1<<5)	// high prioryty req
		    + (0<<6)	// high prioryty req
		    + (1<<8)	// high prioryty req max
		    + (0<<9)	// high prioryty req max
		    + (0<<10)	// high prioryty req max
                    + (0<<20)   // CRTC1 to DAC
                    + (1<<21)   // 420 mode
                    + (1<<22)   // 420 mode
                    + (1<<23)   // 420 mode
                    + (0<<24)   // single chroma line for 420 mode - need to be corrected
                    + (0<<25)   /*/ interlace mode - need to be corrected*/
                    + (0<<26)   // field legth polariry
                    + (0<<27)   // field identification polariry
                    + (1<<28)   // VIDRST detection mode
                    + (0<<29)   // VIDRST detection mode
                    + (1<<30)   // Horizontal counter preload
                    + (1<<31)   // Vertical counter preload
		    ;
	card->cregs.c2datactl = 1 // disable dither - propably not needed, we are already in YUV mode
		    + (1<<1)	// Y filter enable
		    + (1<<2)	// CbCr filter enable
		    + (0<<3)	// subpicture enable (disabled)
		    + (0<<4)	// NTSC enable (disabled - PAL)
		    + (0<<5)	// C2 static subpicture enable (disabled)
		    + (0<<6)	// C2 subpicture offset division (disabled)
		    + (0<<7)	// 422 subformat selection !
/*		    + (0<<8)	// 15 bpp high alpha
		    + (0<<9)	// 15 bpp high alpha
		    + (0<<10)	// 15 bpp high alpha
		    + (0<<11)	// 15 bpp high alpha
		    + (0<<12)	// 15 bpp high alpha
		    + (0<<13)	// 15 bpp high alpha
		    + (0<<14)	// 15 bpp high alpha
		    + (0<<15)	// 15 bpp high alpha
		    + (0<<16)	// 15 bpp low alpha
		    + (0<<17)	// 15 bpp low alpha
		    + (0<<18)	// 15 bpp low alpha
		    + (0<<19)	// 15 bpp low alpha
		    + (0<<20)	// 15 bpp low alpha
		    + (0<<21)	// 15 bpp low alpha
		    + (0<<22)	// 15 bpp low alpha
		    + (0<<23)	// 15 bpp low alpha
		    + (0<<24)	// static subpicture key
		    + (0<<25)	// static subpicture key
		    + (0<<26)	// static subpicture key
		    + (0<<27)	// static subpicture key
		    + (0<<28)	// static subpicture key
*/		    ;
        break;

    case MGA_VID_FORMAT_YUY2:	
	card->cregs.c2ctl = 1   // CRTC2 enabled
		    + (1<<1)	// external clock
		    + (0<<2)	// external clock
		    + (1<<3)	// pixel clock enable - not needed ???
		    + (0<<4)	// high prioryty req - acc to spec
		    + (1<<5)	// high prioryty req
		    + (0<<6)	// high prioryty req
				// 7 reserved
		    + (1<<8)	// high prioryty req max
		    + (0<<9)	// high prioryty req max
		    + (0<<10)	// high prioryty req max
				// 11-19 reserved
                    + (0<<20)   // CRTC1 to DAC
                    + (1<<21)   // 422 mode
                    + (0<<22)   // 422 mode
                    + (1<<23)   // 422 mode
                    + (0<<24)   // single chroma line for 420 mode - need to be corrected
                    + (0<<25)   /*/ interlace mode - need to be corrected*/
                    + (0<<26)   // field legth polariry
                    + (0<<27)   // field identification polariry
                    + (1<<28)   // VIDRST detection mode
                    + (0<<29)   // VIDRST detection mode
                    + (1<<30)   // Horizontal counter preload
                    + (1<<31)   // Vertical counter preload
		    ;
	card->cregs.c2datactl = 1 // disable dither - propably not needed, we are already in YUV mode
		    + (1<<1)	// Y filter enable
		    + (1<<2)	// CbCr filter enable
		    + (0<<3)	// subpicture enable (disabled)
		    + (0<<4)	// NTSC enable (disabled - PAL)
		    + (0<<5)	// C2 static subpicture enable (disabled)
		    + (0<<6)	// C2 subpicture offset division (disabled)
		    + (0<<7)	// 422 subformat selection !
/*		    + (0<<8)	// 15 bpp high alpha
		    + (0<<9)	// 15 bpp high alpha
		    + (0<<10)	// 15 bpp high alpha
		    + (0<<11)	// 15 bpp high alpha
		    + (0<<12)	// 15 bpp high alpha
		    + (0<<13)	// 15 bpp high alpha
		    + (0<<14)	// 15 bpp high alpha
		    + (0<<15)	// 15 bpp high alpha
		    + (0<<16)	// 15 bpp low alpha
		    + (0<<17)	// 15 bpp low alpha
		    + (0<<18)	// 15 bpp low alpha
		    + (0<<19)	// 15 bpp low alpha
		    + (0<<20)	// 15 bpp low alpha
		    + (0<<21)	// 15 bpp low alpha
		    + (0<<22)	// 15 bpp low alpha
		    + (0<<23)	// 15 bpp low alpha
		    + (0<<24)	// static subpicture key
		    + (0<<25)	// static subpicture key
		    + (0<<26)	// static subpicture key
		    + (0<<27)	// static subpicture key
		    + (0<<28)	// static subpicture key
*/			;
          break;

    case MGA_VID_FORMAT_UYVY:	
	card->cregs.c2ctl = 1   // CRTC2 enabled
		    + (1<<1)	// external clock
		    + (0<<2)	// external clock
		    + (1<<3)	// pixel clock enable - not needed ???
		    + (0<<4)	// high prioryty req
		    + (1<<5)	// high prioryty req
		    + (0<<6)	// high prioryty req
		    + (1<<8)	// high prioryty req max
		    + (0<<9)	// high prioryty req max
		    + (0<<10)	// high prioryty req max
                    + (0<<20)   // CRTC1 to DAC
                    + (1<<21)   // 422 mode
                    + (0<<22)   // 422 mode
                    + (1<<23)   // 422 mode
                    + (1<<24)   // single chroma line for 420 mode - need to be corrected
                    + (1<<25)   /*/ interlace mode - need to be corrected*/
                    + (0<<26)   // field legth polariry
                    + (0<<27)   // field identification polariry
                    + (1<<28)   // VIDRST detection mode
                    + (0<<29)   // VIDRST detection mode
                    + (1<<30)   // Horizontal counter preload
                    + (1<<31)   // Vertical counter preload
		    ;
	card->cregs.c2datactl = 0 // enable dither - propably not needed, we are already in YUV mode
		    + (1<<1)	// Y filter enable
		    + (1<<2)	// CbCr filter enable
		    + (0<<3)	// subpicture enable (disabled)
		    + (0<<4)	// NTSC enable (disabled - PAL)
		    + (0<<5)	// C2 static subpicture enable (disabled)
		    + (0<<6)	// C2 subpicture offset division (disabled)
		    + (1<<7)	// 422 subformat selection !
/*		    + (0<<8)	// 15 bpp high alpha
		    + (0<<9)	// 15 bpp high alpha
		    + (0<<10)	// 15 bpp high alpha
		    + (0<<11)	// 15 bpp high alpha
		    + (0<<12)	// 15 bpp high alpha
		    + (0<<13)	// 15 bpp high alpha
		    + (0<<14)	// 15 bpp high alpha
		    + (0<<15)	// 15 bpp high alpha
		    + (0<<16)	// 15 bpp low alpha
		    + (0<<17)	// 15 bpp low alpha
		    + (0<<18)	// 15 bpp low alpha
		    + (0<<19)	// 15 bpp low alpha
		    + (0<<20)	// 15 bpp low alpha
		    + (0<<21)	// 15 bpp low alpha
		    + (0<<22)	// 15 bpp low alpha
		    + (0<<23)	// 15 bpp low alpha
		    + (0<<24)	// static subpicture key
		    + (0<<25)	// static subpicture key
		    + (0<<26)	// static subpicture key
		    + (0<<27)	// static subpicture key
		    + (0<<28)	// static subpicture key
*/		    ;
        break;

    default:
	printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format);
	return -1;
    }

	card->cregs.c2hparam = ( (hdispend - 8) << 16) | (htotal - 8);
	card->cregs.c2hsync = ( (hsyncend - 8) << 16) | (hsyncstart - 8);
	
	card->cregs.c2misc=0	// CRTCV2 656 togg f0
		    +(0<<1) // CRTCV2 656 togg f0
		    +(0<<2) // CRTCV2 656 togg f0
		    +(0<<4) // CRTCV2 656 togg f1
		    +(0<<5) // CRTCV2 656 togg f1
		    +(0<<6) // CRTCV2 656 togg f1
		    +(0<<8) // Hsync active high
		    +(0<<9) // Vsync active high
		    // 16-27 c2vlinecomp - nevim co tam dat
		    ;
	card->cregs.c2offset=(card->regs.bespitch << 1);

	card->cregs.c2pl2startadd0=card->regs.besa1corg;
//	card->cregs.c2pl2startadd1=card->regs.besa2corg;
	card->cregs.c2pl3startadd0=card->regs.besa1c3org;
//	card->cregs.c2pl3startadd1=card->regs.besa2c3org;
		    
	card->cregs.c2preload=(vsyncstart << 16) | (hsyncstart); // from 
	
	card->cregs.c2spicstartadd0=0; // not used
//	card->cregs.c2spicstartadd1=0; // not used
	
	card->cregs.c2startadd0=card->regs.besa1org;
//	card->cregs.c2startadd1=card->regs.besa2org;
	
	card->cregs.c2subpiclut=0; //not used
	
	card->cregs.c2vparam = ( (vdispend - 1) << 16) | (vtotal - 1);
	card->cregs.c2vsync = ( (vsyncend - 1) << 16) | (vsyncstart - 1);

	
#endif

	mga_vid_write_regs(card, 0);
	return 0;
}

#ifdef MGA_ALLOW_IRQ

static void enable_irq(mga_card_t * card){
	long int cc;

	cc = readl(card->mmio_base + IEN);
//	printk(KERN_ALERT "*** !!! IRQREG = %d\n", (int)(cc&0xff));

	writeb(0x11, card->mmio_base + CRTCX);
	
	writeb(0x20, card->mmio_base + CRTCD);  /* clear 0, enable off */
	writeb(0x00, card->mmio_base + CRTCD);  /* enable on */
	writeb(0x10, card->mmio_base + CRTCD);  /* clear = 1 */
	
	writel(card->regs.besglobctl , card->mmio_base + BESGLOBCTL);

}

static void disable_irq(mga_card_t * card){

	writeb(0x11, card->mmio_base + CRTCX);
	writeb(0x20, card->mmio_base + CRTCD);  /* clear 0, enable off */

}

static void mga_handle_irq(int irq, void *dev_id, struct pt_regs *pregs) {
//	static int frame=0;
//	static int counter=0;
	long int cc;
	mga_card_t * card = dev_id;

//	printk(KERN_DEBUG "vcount = %d\n",readl(mga_mmio_base + VCOUNT));

	//printk("mga_interrupt #%d\n", irq);

	// check whether the interrupt is really for us (irq sharing)
	if ( irq != -1 ) {
		cc = readl(card->mmio_base + STATUS);
		if ( ! (cc & 0x10) ) return;  /* vsyncpen */
// 		debug_irqcnt++;
	} 

//    if ( debug_irqignore ) {
//	debug_irqignore = 0;

//	frame=(frame+1)&1;
	card->regs.besctl = (card->regs.besctl & ~0x07000000) + (card->next_frame << 25);
	writel( card->regs.besctl, card->mmio_base + BESCTL ); 

#ifdef CRTC2
// sem pridat vyber obrazku !!!!	
// i han echt kei ahnig was das obe heisse söll
	crtc2_frame_sel(card->next_frame);
#endif
	
#if 0
	++counter;
	if(!(counter&63)){
	    printk("mga irq counter = %d\n",counter);
	}
#endif

//    } else {
//	debug_irqignore = 1;
//    }

	if ( irq != -1 ) {
		writeb( 0x11, card->mmio_base + CRTCX);
		writeb( 0, card->mmio_base + CRTCD );
		writeb( 0x10, card->mmio_base + CRTCD );
	}

//	writel( card->regs.besglobctl, card->mmio_base + BESGLOBCTL);


	return;

}

#endif

static int mga_vid_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
	int frame, result;
	uint32_t tmp;
	mga_card_t * card = (mga_card_t *) file->private_data;

	switch(cmd) 
	{
		case MGA_VID_CONFIG:
			//FIXME remove
//			printk(KERN_DEBUG "mga_vid: vcount = %d\n",readl(card->mmio_base + VCOUNT));
#ifdef MP_DEBUG
			printk(KERN_DEBUG "mga_vid: mmio_base = %p\n",card->mmio_base);
			printk(KERN_DEBUG "mga_vid: mem_base = %08x\n",card->mem_base);
			//FIXME remove

			printk(KERN_DEBUG "mga_vid: Received configuration\n");
#endif			

 			if(copy_from_user(&card->config,(mga_vid_config_t*) arg,sizeof(mga_vid_config_t)))
			{
				printk(KERN_ERR "mga_vid: failed copy from userspace\n");
				return(-EFAULT);
			}
			if(card->config.version != MGA_VID_VERSION){
				printk(KERN_ERR "mga_vid: incompatible version! driver: %X  requested: %X\n",MGA_VID_VERSION,card->config.version);
				return(-EFAULT);
			}

			if(card->config.frame_size==0 || card->config.frame_size>1024*768*2){
				printk(KERN_ERR "mga_vid: illegal frame_size: %d\n",card->config.frame_size);
				return(-EFAULT);
			}

			if(card->config.num_frames<1 || card->config.num_frames>4){
				printk(KERN_ERR "mga_vid: illegal num_frames: %d\n",card->config.num_frames);
				return(-EFAULT);
			}
			
			card->src_base = (card->ram_size * 0x100000 - card->config.num_frames * card->config.frame_size - card->top_reserved);
			if(card->src_base<0){
				printk(KERN_ERR "mga_vid: not enough memory for frames!\n");
				return(-EFAULT);
			}
			card->src_base &= (~0xFFFF); // 64k boundary
#ifdef MP_DEBUG
			printk(KERN_DEBUG "mga YUV buffer base: 0x%X\n", card->src_base);
#endif			
			
			if (card->is_g400) 
			  card->config.card_type = MGA_G400;
			else
			  card->config.card_type = MGA_G200;
		       
			card->config.ram_size = card->ram_size;

			if (copy_to_user((mga_vid_config_t *) arg, &card->config, sizeof(mga_vid_config_t)))
			{
				printk(KERN_ERR "mga_vid: failed copy to userspace\n");
				return(-EFAULT);
			}

			result = mga_vid_set_config(card);	
			if(!result) card->configured=1;
			return result;
		break;

		case MGA_VID_ON:
#ifdef MP_DEBUG
			printk(KERN_DEBUG "mga_vid: Video ON\n");
#endif			
			card->vid_src_ready = 1;
			if(card->vid_overlay_on)
			{
				card->regs.besctl |= 1;
				mga_vid_write_regs(card, 0);
			}
#ifdef MGA_ALLOW_IRQ
			if ( card->irq != -1 ) enable_irq(card);
#endif
			card->next_frame=0;
		break;

		case MGA_VID_OFF:
#ifdef MP_DEBUG
			printk(KERN_DEBUG "mga_vid: Video OFF (ioctl)\n");
#endif			
			card->vid_src_ready = 0;   
#ifdef MGA_ALLOW_IRQ
			if ( card->irq != -1 ) disable_irq(card);
#endif
			card->regs.besctl &= ~1;
                        card->regs.besglobctl &= ~(1<<6);  // UYVY format selected
			mga_vid_write_regs(card, 0);
		break;
			
		case MGA_VID_FSEL:
			if(copy_from_user(&frame,(int *) arg,sizeof(int)))
			{
				printk(KERN_ERR "mga_vid: FSEL failed copy from userspace\n");
				return(-EFAULT);
			}

			mga_vid_frame_sel(card, frame);
		break;

		case MGA_VID_GET_LUMA:
			//tmp = card->regs.beslumactl;
			//tmp = (tmp&0xFFFF0000) | (((tmp&0xFFFF) - 0x80)&0xFFFF);
			tmp = (card->brightness << 16) | (card->contrast&0xFFFF);

			if (copy_to_user((uint32_t *) arg, &tmp, sizeof(uint32_t)))
			{
				printk(KERN_ERR "mga_vid: failed copy %p to userspace %p\n",
					   &tmp, (uint32_t *) arg);
				return(-EFAULT);
			}
		break;
			
		case MGA_VID_SET_LUMA:
			tmp = arg;
			card->brightness=tmp>>16; card->contrast=tmp&0xFFFF;
			//card->regs.beslumactl = (tmp&0xFFFF0000) | ((tmp + 0x80)&0xFFFF);
			card->regs.beslumactl = (card->brightness << 16) | ((card->contrast+0x80)&0xFFFF);
			mga_vid_write_regs(card, 0);
		break;
			
	        default:
			printk(KERN_ERR "mga_vid: Invalid ioctl\n");
			return (-EINVAL);
	}
       
	return 0;
}

static void cards_init(mga_card_t * card, struct pci_dev * dev, int card_number, int is_g400);

// returns the number of found cards
static int mga_vid_find_card(void)
{
	struct pci_dev *dev = NULL;
	char *mga_dev_name;
	mga_card_t * card;

	while((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_ANY_ID, dev)))
	{
		mga_dev_name = "";
		mga_cards_num++;
		if(mga_cards_num == MGA_MAX_CARDS)
		{
			printk(KERN_WARNING "mga_vid: Trying to initialize more than %d cards\n",MGA_MAX_CARDS);
			mga_cards_num--;
			break;
		}

		card = kmalloc(sizeof(mga_card_t), GFP_KERNEL);
		if(!card) 
		{ 
			printk(KERN_ERR "mga_vid: memory allocation failed\n");
			mga_cards_num--;
			break;
		}
		
		mga_cards[mga_cards_num - 1] = card;
		
		switch(dev->device) {
		case PCI_DEVICE_ID_MATROX_G550:
			mga_dev_name = "MGA G550";
			printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name);
			cards_init(card, dev, mga_cards_num - 1, 1);
			break;
		case PCI_DEVICE_ID_MATROX_G400:
			mga_dev_name = "MGA G400/G450";
			printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name);
			cards_init(card, dev, mga_cards_num - 1, 1);
			break;
		case PCI_DEVICE_ID_MATROX_G200_AGP:
			mga_dev_name = "MGA G200 AGP";
			printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name);
			cards_init(card, dev, mga_cards_num - 1, 0);
			break;
		case PCI_DEVICE_ID_MATROX_G200_PCI:
			mga_dev_name = "MGA G200";
			printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name);
			cards_init(card, dev, mga_cards_num - 1, 0);
			break;
		default:
			mga_cards_num--;
			printk(KERN_INFO "mga_vid: ignoring matrox device (%d) at %s [%s]\n", dev->device, dev->slot_name, dev->name);
			break;
		}
	}
 	
	if(!mga_cards_num)
	{
		printk(KERN_ERR "mga_vid: No supported cards found\n");
	} else {
		printk(KERN_INFO "mga_vid: %d supported cards found\n", mga_cards_num);
	}
	
	return mga_cards_num;
}

static void mga_param_buff_fill( mga_card_t * card )
{
    unsigned len;
    unsigned size = card->param_buff_size;
    char * buf = card->param_buff;
    len = 0;
    len += snprintf(&buf[len],size-len,"Interface version: %04X\n",MGA_VID_VERSION);
    len += snprintf(&buf[len],size-len,"Memory: %x:%dM\n",card->mem_base,(unsigned int) card->ram_size);
    len += snprintf(&buf[len],size-len,"MMIO: %p\n",card->mmio_base);
    len += snprintf(&buf[len],size-len,"Configurable stuff:\n");
    len += snprintf(&buf[len],size-len,"~~~~~~~~~~~~~~~~~~~\n");
    len += snprintf(&buf[len],size-len,PARAM_BRIGHTNESS"%d\n",card->brightness);
    len += snprintf(&buf[len],size-len,PARAM_CONTRAST"%d\n",card->contrast);
    len += snprintf(&buf[len],size-len,PARAM_BLACKIE"%s\n",card->regs.blackie?"on":"off");
    card->param_buff_len = len;
    // check boundaries of mga_param_buff before writing to it!!!
}


static ssize_t mga_vid_read(struct file *file, char *buf, size_t count, loff_t *ppos)
{
	uint32_t size;
	mga_card_t * card = (mga_card_t *) file->private_data;
	
	if(!card->param_buff) return -ESPIPE;
	if(!(*ppos)) mga_param_buff_fill(card);
	if(*ppos >= card->param_buff_len) return 0;
	size = min(count,card->param_buff_len-(uint32_t)(*ppos));
	memcpy(buf,card->param_buff,size);
	*ppos += size;
	return size;
}

static ssize_t mga_vid_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
{
	mga_card_t * card = (mga_card_t *) file->private_data;

	if(memcmp(buf,PARAM_BRIGHTNESS,min(count,strlen(PARAM_BRIGHTNESS))) == 0)
	{
		short brightness;
		brightness=simple_strtol(&buf[strlen(PARAM_BRIGHTNESS)],NULL,10);
		if (brightness>127 || brightness<-128) { brightness=0;} 
//		printk(KERN_DEBUG "mga_vid: brightness modified ( %d ) \n",brightness);
		card->brightness=brightness;
	} else 
	if(memcmp(buf,PARAM_CONTRAST,min(count,strlen(PARAM_CONTRAST))) == 0)
	{
		short contrast;
		contrast=simple_strtol(&buf[strlen(PARAM_CONTRAST)],NULL,10);
		if (contrast>127 || contrast<-128) { contrast=0;} 
//		printk(KERN_DEBUG "mga_vid: contrast modified ( %d ) \n",contrast);
		card->contrast=contrast;
	} else 

        if(memcmp(buf,PARAM_BLACKIE,min(count,strlen(PARAM_BLACKIE))) == 0)
	{
		short blackie;
		blackie=simple_strtol(&buf[strlen(PARAM_BLACKIE)],NULL,10);
//		printk(KERN_DEBUG "mga_vid: shadow mode: ( %d ) \n",blackie);
		card->regs.blackie=(blackie>0)?1:0;
	} else count = -EIO;
	// TODO: reset settings
	return count;
}

static int mga_vid_mmap(struct file *file, struct vm_area_struct *vma)
{
	mga_card_t * card = (mga_card_t *) file->private_data;

#ifdef MP_DEBUG
	printk(KERN_DEBUG "mga_vid: mapping video memory into userspace\n");
#endif	

	if(!card->configured)
	{
		printk(KERN_ERR "mga_vid: card is not configured, cannot mmap\n");
		return(-EAGAIN);
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,3)
	if(remap_page_range(vma, vma->vm_start, card->mem_base + card->src_base,
		 vma->vm_end - vma->vm_start, vma->vm_page_prot)) 
#else
	if(remap_page_range(vma->vm_start, card->mem_base + card->src_base,
		 vma->vm_end - vma->vm_start, vma->vm_page_prot)) 
#endif
	{
		printk(KERN_ERR "mga_vid: error mapping video memory\n");
		return(-EAGAIN);
	}

	return(0);
}

static int mga_vid_release(struct inode *inode, struct file *file)
{
	mga_card_t * card;

	//Close the window just in case
#ifdef MP_DEBUG
	printk(KERN_DEBUG "mga_vid: Video OFF (release)\n");
#endif	

	card = (mga_card_t *) file->private_data;

	card->vid_src_ready = 0;   
	card->regs.besctl &= ~1;
        card->regs.besglobctl &= ~(1<<6);  // UYVY format selected
//	card->config.colkey_on=0; //!!!
	mga_vid_write_regs(card, 1);
	card->vid_in_use = 0;

	MOD_DEC_USE_COUNT;
	return 0;
}

static long long mga_vid_lseek(struct file *file, long long offset, int origin)
{
	return -ESPIPE;
}					 

static int mga_vid_open(struct inode *inode, struct file *file)
{
	mga_card_t * card;
	
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2)
	int minor = MINOR(inode->i_rdev.value);
#else
	int minor = MINOR(inode->i_rdev);
#endif

	if(!file->private_data)
	{
		// we are not using devfs, use the minor
		// number to specify the card we are using

		// we don't have that many cards
		if(minor >= mga_cards_num)
		 return(-ENXIO);

		file->private_data = mga_cards[minor];
#ifdef MP_DEBUG
		printk(KERN_DEBUG "mga_vid: Not using devfs\n");
#endif	
	}
#ifdef MP_DEBUG
	  else {
		printk(KERN_DEBUG "mga_vid: Using devfs\n");
	}
#endif	

	card = (mga_card_t *) file->private_data;

	if(card->vid_in_use == 1) 
		return(-EBUSY);

	card->vid_in_use = 1;
	MOD_INC_USE_COUNT;
	return(0);
}

#if LINUX_VERSION_CODE >= 0x020400
static struct file_operations mga_vid_fops =
{
	llseek:		mga_vid_lseek,
	read:			mga_vid_read,
	write:		mga_vid_write,
	ioctl:		mga_vid_ioctl,
	mmap:			mga_vid_mmap,
	open:			mga_vid_open,
	release: 	mga_vid_release
};
#else
static struct file_operations mga_vid_fops =
{
	mga_vid_lseek,
	mga_vid_read,
	mga_vid_write,
	NULL,
	NULL,
	mga_vid_ioctl,
	mga_vid_mmap,
	mga_vid_open,
	NULL,
	mga_vid_release
};
#endif

static void cards_init(mga_card_t * card, struct pci_dev * dev, int card_number, int is_g400)
{
	unsigned int card_option;
// temp buffer for device filename creation used only by devfs
#ifdef CONFIG_DEVFS_FS
	char buffer[16];
#endif

	memset(card,0,sizeof(mga_card_t));
	card->irq = -1;

	card->pci_dev = dev;
	card->irq = dev->irq;
	card->is_g400 = is_g400;

	card->param_buff = kmalloc(PARAM_BUFF_SIZE,GFP_KERNEL);
	if(card->param_buff) card->param_buff_size = PARAM_BUFF_SIZE;

	card->brightness = mga_brightness[card_number];
	card->contrast = mga_contrast[card_number];
	card->top_reserved = mga_top_reserved[card_number];
	
#if LINUX_VERSION_CODE >= 0x020300
	card->mmio_base = ioremap_nocache(dev->resource[1].start,0x4000);
	card->mem_base =  dev->resource[0].start;
#else
	card->mmio_base = ioremap_nocache(dev->base_address[1] & PCI_BASE_ADDRESS_MEM_MASK,0x4000);
	card->mem_base =  dev->base_address[0] & PCI_BASE_ADDRESS_MEM_MASK;
#endif
	printk(KERN_INFO "mga_vid: MMIO at 0x%p IRQ: %d  framebuffer: 0x%08X\n", card->mmio_base, card->irq, card->mem_base);

	pci_read_config_dword(dev,  0x40, &card_option);
	printk(KERN_INFO "mga_vid: OPTION word: 0x%08X  mem: 0x%02X  %s\n", card_option,
		(card_option>>10)&0x17, ((card_option>>14)&1)?"SGRAM":"SDRAM");

	if (mga_ram_size[card_number]) {
		printk(KERN_INFO "mga_vid: RAMSIZE forced to %d MB\n", mga_ram_size[card_number]);
		card->ram_size=mga_ram_size[card_number];
	} else {

#ifdef MGA_MEMORY_SIZE
	    card->ram_size = MGA_MEMORY_SIZE;
	    printk(KERN_INFO "mga_vid: hard-coded RAMSIZE is %d MB\n", (unsigned int) card->ram_size);

#else

	    if (card->is_g400){
		switch((card_option>>10)&0x17){
		    // SDRAM:
		    case 0x00:
		    case 0x04:  card->ram_size = 16; break;
		    case 0x03:  
		    case 0x05:  card->ram_size = 32; break;
		    // SGRAM:
		    case 0x10:
		    case 0x14:  card->ram_size = 32; break;
		    case 0x11:
		    case 0x12:  card->ram_size = 16; break;
		    default:
			card->ram_size = 16;
			printk(KERN_INFO "mga_vid: Couldn't detect RAMSIZE, assuming 16MB!");
		}
		/* Check for buggy 16MB cards reporting 32 MB */
		if(card->ram_size != 16 &&
		   (dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM ||
		    dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM ||
		    dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB))
		{
		    printk(KERN_INFO "mga_vid: Detected 16MB card reporting %d MB RAMSIZE, overriding\n", card->ram_size);
		    card->ram_size = 16;
		}
	    }else{
		switch((card_option>>10)&0x17){
//		    case 0x10:
//		    case 0x13:  card->ram_size = 8; break;
		    default: card->ram_size = 8;
		}
	    } 
#if 0
//	    printk("List resources -----------\n");
	    for(temp=0;temp<DEVICE_COUNT_RESOURCE;temp++){
	        struct resource *res=&dev->resource[temp];
	        if(res->flags){
	          int size=(1+res->end-res->start)>>20;
	          printk(KERN_DEBUG "res %d:  start: 0x%X   end: 0x%X  (%d MB) flags=0x%X\n",temp,res->start,res->end,size,res->flags);
	          if(res->flags&(IORESOURCE_MEM|IORESOURCE_PREFETCH)){
	              if(size>card->ram_size && size<=64) card->ram_size=size;
	          }
	        }
	    }
#endif
	    printk(KERN_INFO "mga_vid: detected RAMSIZE is %d MB\n", (unsigned int) card->ram_size);
#endif
        }


#ifdef MGA_ALLOW_IRQ
	if ( card->irq != -1 ) {
		int tmp = request_irq(card->irq, mga_handle_irq, SA_INTERRUPT | SA_SHIRQ, "Syncfb Time Base", card);
		if ( tmp ) {
			printk(KERN_INFO "syncfb (mga): cannot register irq %d (Err: %d)\n", card->irq, tmp);
			card->irq=-1;
		} else {
			printk(KERN_DEBUG "syncfb (mga): registered irq %d\n", card->irq);
		}
	} else {
		printk(KERN_INFO "syncfb (mga): No valid irq was found\n");
		card->irq=-1;
	}
#else
		printk(KERN_INFO "syncfb (mga): IRQ disabled in mga_vid.c\n");
		card->irq=-1;
#endif

	// register devfs, let the kernel give us major and minor numbers
#ifdef CONFIG_DEVFS_FS
	snprintf(buffer, 16, "mga_vid%d", card_number);
	card->dev_handle = devfs_register(NULL, buffer, DEVFS_FL_AUTO_DEVNUM,
					0, 0,
					S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IFCHR,
					&mga_vid_fops, card);
#endif

}

/* 
 * Main Initialization Function 
 */

static int mga_vid_initialize(void)
{
 	int i;

//	printk(KERN_INFO "Matrox MGA G200/G400 YUV Video interface v0.01 (c) Aaron Holtzman \n");
	printk(KERN_INFO "Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi\n");

	for(i = 0; i < MGA_MAX_CARDS; i++)
	{
		if (mga_ram_size[i]) {
			if (mga_ram_size[i]<4 || mga_ram_size[i]>64) {
				printk(KERN_ERR "mga_vid: invalid RAMSIZE: %d MB\n", mga_ram_size[i]);
				return -EINVAL;
			}
		}
	}
	
	if(register_chrdev(major, "mga_vid", &mga_vid_fops))
	{
		printk(KERN_ERR "mga_vid: unable to get major: %d\n", major);
		return -EIO;
	}

	if (!mga_vid_find_card())
	{
		printk(KERN_ERR "mga_vid: no supported devices found\n");
		unregister_chrdev(major, "mga_vid");
		return -EINVAL;
	}
#ifdef CONFIG_DEVFS_FS
	  else {
		// we assume that this always succeedes
		dev_handle = devfs_register(NULL, "mga_vid", DEVFS_FL_AUTO_DEVNUM,
		                            0,0,
		                            S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IFCHR,
		                            &mga_vid_fops, mga_cards[0]);
	}
#endif

	return(0);
}

int init_module(void)
{
	return mga_vid_initialize();
}

void cleanup_module(void)
{
	int i;
	mga_card_t * card;

	for (i = 0; i < MGA_MAX_CARDS; i++)
	{
		card = mga_cards[i];
		if(card)
		{
#ifdef MGA_ALLOW_IRQ
			if (card->irq != -1)
				free_irq(card->irq, &(card->irq));
#endif

			if(card->mmio_base)
				iounmap(card->mmio_base);
			if(card->param_buff)
				kfree(card->param_buff);
#ifdef CONFIG_DEVFS_FS
			if(card->dev_handle) devfs_unregister(card->dev_handle);
#endif

			kfree(card);
			mga_cards[i]=NULL;
		}
	}

	//FIXME turn off BES
	printk(KERN_INFO "mga_vid: Cleaning up module\n");
#ifdef CONFIG_DEVFS_FS
	if(dev_handle) devfs_unregister(dev_handle);
#endif
	unregister_chrdev(major, "mga_vid");
}