view libao2/ao_jack.c @ 14742:76d461a061df

Unified colorkey code for vo xv and vo xvmc. Made the code also more flexible. Colorkey drawing is now by default done as proposed by Marko Macek. Patch also approved by iive.

/*
 * ao_jack - JACK audio output driver for MPlayer
 *
 * Kamil Strzelecki < esack at browarek.net >
 *
 * This driver is distribuited under terms of GPL
 *
 * It uses bio2jack (http://bio2jack.sf.net/).
 *
 */

#include <stdio.h>
#include <jack/jack.h>

#include "config.h"
#include "audio_out.h"
#include "audio_out_internal.h"
#include "libaf/af_format.h"
#include "mp_msg.h"

//#include "bio2jack.h"

static int driver = 0;
long latency = 0;
long approx_bytes_in_jackd = 0;

//bio2jack stuff:
#define ERR_SUCCESS						0
#define ERR_OPENING_JACK				1
#define ERR_RATE_MISMATCH				2
#define ERR_BYTES_PER_FRAME_INVALID		3
enum status_enum { PLAYING, PAUSED, STOPPED, CLOSED, RESET };
void JACK_Init(void);
int  JACK_Open(int* deviceID, unsigned int bits_per_sample, unsigned long *rate, int channels);
int  JACK_Close(int deviceID); /* return 0 for success */
void JACK_Reset(int deviceID); /* free all buffered data and reset several values in the device */
long JACK_Write(int deviceID, char *data, unsigned long bytes); /* returns the number of bytes written */
long JACK_GetJackLatency(int deviceID); /* return the latency in milliseconds of jack */
int  JACK_SetState(int deviceID, enum status_enum state); /* playing, paused, stopped */
int  JACK_SetAllVolume(int deviceID, unsigned int volume);
int  JACK_SetVolumeForChannel(int deviceID, unsigned int channel, unsigned int volume);
void JACK_GetVolumeForChannel(int deviceID, unsigned int channel, unsigned int *volume);
//


static ao_info_t info =
{
	"JACK audio output",
	"jack",
	"Kamil Strzelecki <[e-mail]>",
	""
};


LIBAO_EXTERN(jack)


static int control(int cmd, void *arg)
{
	switch(cmd) {
		case AOCONTROL_GET_VOLUME:	
			{
				ao_control_vol_t *vol = (ao_control_vol_t *)arg;
				unsigned int l, r;
				
				JACK_GetVolumeForChannel(driver, 0, &l);
				JACK_GetVolumeForChannel(driver, 1, &r);
				vol->left = (float )l;
				vol->right = (float )r;
				
				return CONTROL_OK;
			}
		case AOCONTROL_SET_VOLUME:
			{
				ao_control_vol_t *vol = (ao_control_vol_t *)arg;
				unsigned int l = (int )vol->left,
					r = (int )vol->right,
					avg_vol = (l + r) / 2,
					err = 0;

				switch (ao_data.channels) {
				case 6:
					if((err = JACK_SetVolumeForChannel(driver, 5, avg_vol))) {
					mp_msg(MSGT_AO, MSGL_ERR, 
						"AO: [Jack] Setting lfe volume failed, error %d\n",err);
						return CONTROL_ERROR;
					}
				case 5:
					if((err = JACK_SetVolumeForChannel(driver, 4, avg_vol))) {
						mp_msg(MSGT_AO, MSGL_ERR, 
						"AO: [Jack] Setting center volume failed, error %d\n",err);
						return CONTROL_ERROR;
					}
				case 4:
					if((err = JACK_SetVolumeForChannel(driver, 3, r))) {
						mp_msg(MSGT_AO, MSGL_ERR,
						"AO: [Jack] Setting rear right volume failed, error %d\n",err);
					return CONTROL_ERROR;
				}
				case 3:
					if((err = JACK_SetVolumeForChannel(driver, 2, l))) {
						mp_msg(MSGT_AO, MSGL_ERR,
						"AO: [Jack] Setting rear left volume failed, error %d\n",err);
						return CONTROL_ERROR;
					}
				case 2:
				if((err = JACK_SetVolumeForChannel(driver, 1, r))) {
					mp_msg(MSGT_AO, MSGL_ERR, 
						"AO: [Jack] Setting right volume failed, error %d\n",err);
					return CONTROL_ERROR;
				}
				case 1:
					if((err = JACK_SetVolumeForChannel(driver, 0, l))) {
						mp_msg(MSGT_AO, MSGL_ERR,
						"AO: [Jack] Setting left volume failed, error %d\n",err);
						return CONTROL_ERROR;
					}
				}

				return CONTROL_OK;
			}
	}

	return(CONTROL_UNKNOWN);
}


static int init(int rate_hz, int channels, int format, int flags)
{
	int err, m, frag_spec;
	unsigned long rate;
	unsigned int bits_per_sample;
	
	unsigned long jack_port_flags=JackPortIsPhysical;
	unsigned int jack_port_name_count=0;
	const char *jack_port_name=NULL;

	mp_msg(MSGT_AO, MSGL_INFO, "AO: [Jack] Initialising library.\n");
	JACK_Init();

	if (ao_subdevice) {
		jack_port_flags = 0;
		jack_port_name_count = 1;
		jack_port_name = ao_subdevice;
		mp_msg(MSGT_AO, MSGL_INFO, "AO: [Jack] Trying to use jack device:%s.\n", ao_subdevice);
	}

	switch (format) {
		case AF_FORMAT_U8:
		case AF_FORMAT_S8:
			format = AF_FORMAT_U8;
			bits_per_sample = 8;
			m = 1;
			break;
		default:
			format = AF_FORMAT_S16_LE;
			bits_per_sample = 16;
			m = 2;
			break;
	}

	rate = rate_hz;
	
	err = JACK_OpenEx(&driver, bits_per_sample, &rate, channels, channels,
			&jack_port_name, jack_port_name_count, jack_port_flags);
	
	/* if sample rates doesn't match try to open device with jack's rate and
	 * let mplayer convert it (rate now contains that which jackd use) */
	if(err == ERR_RATE_MISMATCH) {
		mp_msg(MSGT_AO, MSGL_INFO, 
				"AO: [Jack] Sample rate mismatch, trying to resample.\n");
		
		err = JACK_OpenEx(&driver, bits_per_sample, &rate, channels, channels,
				&jack_port_name, jack_port_name_count, jack_port_flags);
	}
	
	/* any other error */
	if(err != ERR_SUCCESS) {
		mp_msg(MSGT_AO, MSGL_ERR, 
				"AO: [Jack] JACK_Open() failed, error %d\n", err);
		return 0;
	}
	
	err = JACK_SetAllVolume(driver, 100);
	if(err != ERR_SUCCESS) {
		// This is not fatal, but would be peculiar...
		mp_msg(MSGT_AO, MSGL_ERR,
			"AO: [Jack] JACK_SetAllVolume() failed, error %d\n", err);
	}

	latency = JACK_GetJackLatency(driver);

	ao_data.format = format;
	ao_data.channels = channels;
	ao_data.samplerate = rate;
	ao_data.bps = ( rate * channels * m );

	// Rather rough way to find out the rough number of bytes buffered
	approx_bytes_in_jackd = JACK_GetJackBufferedBytes(driver) * 2;
	
	mp_msg(MSGT_AO, MSGL_INFO, 
			"AO: [Jack] OK. I'm ready to go (%d Hz/%d channels/%d bit)\n",
			ao_data.samplerate, ao_data.channels, bits_per_sample);

	return 1;
}


static void uninit(int immed)
{
	int errval = 0;
	
	if((errval = JACK_Close(driver)))
		mp_msg(MSGT_AO, MSGL_ERR, 
				"AO: [Jack] error closing device, error %d\n", errval);
}


static int play(void* data,int len,int flags)
{
	return JACK_Write(driver, data, len);
}


static void audio_pause()
{
	JACK_SetState(driver, PAUSED);
}


static void audio_resume()
{
	JACK_SetState(driver, PLAYING);
}


static void reset()
{
	JACK_Reset(driver);
	latency = JACK_GetJackLatency(driver);
	// Rather rough way to find out the rough number of bytes buffered
	approx_bytes_in_jackd = JACK_GetJackBufferedBytes(driver) * 2;
}


static int get_space()
{
	return JACK_GetBytesFreeSpace(driver);
}


static float get_delay()
{
	float ret = 0;
	ret = (JACK_GetBytesStored(driver) + approx_bytes_in_jackd + latency) / (float)ao_data.bps;
	return ret;
}