view libvo/vo_dxr3.c @ 5134:83b3dc5132a5

Fixed some bugs with fame, had to disable prebuffering with fame though as sync drifts off. But fame is alot more stable than avcodec and so far I've noticed a small quality increase with some videos (not all). Will have to work some more on the sync stuff... This one should be stable though..
author mswitch
date Sat, 16 Mar 2002 15:49:26 +0000
parents cfccb5dbe992
children 72817be5265f
line wrap: on
line source

/* 
 * vo_dxr3.c - DXR3/H+ video out
 *
 * Copyright (C) 2002 David Holm <dholm@iname.com>
 *
 */

/* ChangeLog added 2002-01-10
 * 2002-03-16:
 *  Fixed problems with fame, it gives a better picture than avcodec,
 *  but is slightly slower. Most notably the wobbling effect is gone
 *  with fame.
 *
 * 2002-03-13:
 *  Preliminary fame support added (it breaks after seeking, why?)
 *
 * 2002-02-18:
 *  Fixed sync problems when pausing video (while using prebuffering)
 *
 * 2002-02-16:
 *  Fixed bug which would case invalid output when using :noprebuf
 *  Removed equalization code, it caused problems on slow systems
 *
 * 2002-02-13:
 *  Using the swscaler instead of the old hand coded shit. (Checkout man mplayer and search for sws ;).
 *  Using aspect function to setup a proper mpeg1, no more hassling with odd resolutions or GOP-sizes,
 *  this would only create jitter on some vids!
 *  The swscaler sometimes exits with sig8 on mpegs, I don't know why yet (just use -vc mpegpes in this
 *  case, and report to me if you have any avi's etc which does this...)
 *
 * 2002-02-09:
 *  Thanks to the new control() method I have finally been able to enable the em8300 prebuffering.
 *  This should speed up playback on all systems, the vout cpu usage should rocket since I will be hogging
 *  the pci bus. Not to worry though, since frames are prebuffered it should be able to take a few blows
 *  if you start doing other stuff simultaneously.
 *
 * 2002-02-03:
 *  Removal of libmp1e, libavcodec has finally become faster (and it's code is helluva lot cleaner)
 *
 * 2002-02-02:
 *  Cleaned out some old code which might have slowed down writes
 *
 * 2002-01-17:
 *  Testrelease of new sync engine (using previously undocumented feature of em8300).
 *
 * 2002-01-15:
 *  Preliminary subpic support with -vc mpegpes and dvd's
 *  Device interfaces tries the new naming scheme by default (even though most users probably still use the old one)
 *
 * 2002-01-10:
 *  I rehauled the entire codebase. I have now changed to
 *  Kernighan & Ritchie codingstyle, please mail me if you 
 *  find any inconcistencies.
 */
 
#include <linux/em8300.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/select.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <stdio.h>
#include <time.h>

#include "config.h"
#include "fastmemcpy.h"

#include "video_out.h"
#include "video_out_internal.h"
#include "aspect.h"
#include "../postproc/rgb2rgb.h"
#include "../postproc/swscale.h"

#ifdef USE_LIBFAME
#include "../libfame/fame.h"
static unsigned char *outbuf = NULL;
static fame_parameters_t fame_params;
static fame_yuv_t fame_yuv;
static fame_context_t *fame_ctx=NULL;
#elif USE_LIBAVCODEC
#ifdef USE_LIBAVCODEC_SO
#include <libffmpeg/avcodec.h>
#else
#include "libavcodec/avcodec.h"
#endif
/* for video encoder */
static AVCodec *avc_codec = NULL;
static AVCodecContext *avc_context = NULL;
static AVPicture avc_picture;
int avc_outbuf_size = 100000;
#endif

char *picture_data[] = { NULL, NULL, NULL };
int picture_linesize[] = { 0, 0, 0 };

#ifdef HAVE_MMX
#include "mmx.h"
#endif

LIBVO_EXTERN (dxr3)

/* Resolutions and positions */
static int v_width, v_height;
static int s_width, s_height;
static int osd_w, osd_h;
static int noprebuf = 0;
static int img_format = 0;
static SwsContext * sws = NULL;

/* File descriptors */
static int fd_control = -1;
static int fd_video = -1;
static int fd_spu = -1;
static char fdv_name[80];

/* Static variable used in ioctl's */
static int ioval = 0;

static vo_info_t vo_info = 
{
	"DXR3/H+ video out",
	"dxr3",
	"David Holm <dholm@iname.com>",
	""
};

uint32_t control(uint32_t request, void *data, ...)
{
	uint32_t flag = 0;
	switch (request) {
	case VOCTRL_RESUME:
		if (!noprebuf) {
			ioval = EM8300_PLAYMODE_PLAY;
			if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) {
				printf("VO: [dxr3] Unable to set playmode!\n");
			}
		}
		return VO_TRUE;
	case VOCTRL_PAUSE:
		if (!noprebuf) {
			ioval = EM8300_PLAYMODE_PAUSED;
			if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) {
				printf("VO: [dxr3] Unable to set playmode!\n");
			}
		}
		return VO_TRUE;
	case VOCTRL_RESET:
		if (!noprebuf) {
			close(fd_video);
			fd_video = open(fdv_name, O_WRONLY);
			fsync(fd_video);
		}
		return VO_TRUE;
	case VOCTRL_QUERY_FORMAT:
		switch (*((uint32_t*)data)) {	
		case IMGFMT_MPEGPES:
			/* Hardware accelerated | Hardware supports subpics */
			flag = 0x2 | 0x8;
			break;
#if defined(USE_LIBFAME) || defined(USE_LIBAVCODEC)
		case IMGFMT_YV12:
		case IMGFMT_YUY2:
		case IMGFMT_RGB24:
		case IMGFMT_BGR24:
			/* Conversion needed | OSD Supported */
			flag = 0x1 | 0x4;
			break;
#else
		default:
			printf("VO: [dxr3] You have disabled libavcodec/libfame support (Read DOCS/codecs.html)!\n");
#endif
		}
		if (noprebuf) {
			return flag;
		} else {
			return (flag | 0x100);
		}
	}
	return VO_NOTIMPL;
}

static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, uint32_t d_height, uint32_t fullscreen, char *title, uint32_t format,const vo_tune_info_t *info)
{
	int tmp1, tmp2, size;
	em8300_register_t reg;
    
	/* Softzoom turned on, downscale */
	/* This activates the subpicture processor, you can safely disable this and still send */
	/* broken subpics to the em8300, if it's enabled and you send broken subpics you will end */
	/* up in a lockup */
	ioval = EM8300_SPUMODE_ON;
	if (ioctl(fd_control, EM8300_IOCTL_SET_SPUMODE, &ioval) < 0) {
		printf("VO: [dxr3] Unable to set subpicture mode!\n");
		uninit();
		return -1;
	}

	/* Set the playmode to play (just in case another app has set it to something else) */
	ioval = EM8300_PLAYMODE_PLAY;
	if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) {
		printf("VO: [dxr3] Unable to set playmode!\n");
	}
	
	/* Start em8300 prebuffering and sync engine */
	reg.microcode_register = 1;
	reg.reg = 0;
	reg.val = MVCOMMAND_SYNC;
	ioctl(fd_control, EM8300_IOCTL_WRITEREG, &reg);
	
	/* Clean buffer by syncing it */
	ioval = EM8300_SUBDEVICE_VIDEO;
	ioctl(fd_control, EM8300_IOCTL_FLUSH, &ioval);
	ioval = EM8300_SUBDEVICE_AUDIO;
	ioctl(fd_control, EM8300_IOCTL_FLUSH, &ioval);
	fsync(fd_video);
	if (!noprebuf) {
		ioval = 0x900;
		ioctl(fd_control, EM8300_IOCTL_SCR_SETSPEED, &ioval);
		ioval = 0;
		ioctl(fd_control, EM8300_IOCTL_SCR_SET, &ioval);
	}

	/* Store some variables statically that we need later in another scope */
	img_format = format;
	v_width = width;
	v_height = height;

	/* libavcodec requires a width and height that is x|16 */
	aspect_save_orig(width, height);
	aspect_save_prescale(d_width, d_height);
	ioctl(fd_control, EM8300_IOCTL_GET_VIDEOMODE, &ioval);
	if (ioval == EM8300_VIDEOMODE_NTSC) {
		printf("VO: [dxr3] Setting up for NTSC.\n");
		aspect_save_screenres(352, 240);
	} else {
		printf("VO: [dxr3] Setting up for PAL/SECAM.\n");
		aspect_save_screenres(352, 288);
	}
	aspect(&s_width, &s_height, A_ZOOM);
	s_width -= s_width % 16;
	s_height -= s_height % 16;
	
	/* Try to figure out whether to use widescreen output or not */
	/* Anamorphic widescreen modes makes this a pain in the ass */
	tmp1 = abs(d_height - ((d_width / 4) * 3));
	tmp2 = abs(d_height - (int) (d_width / 2.35));
	if (tmp1 < tmp2) {
		ioval = EM8300_ASPECTRATIO_4_3;
		printf("VO: [dxr3] Setting aspect ratio to 4:3\n");
	} else {
		ioval = EM8300_ASPECTRATIO_16_9;
		printf("VO: [dxr3] Setting aspect ratio to 16:9\n");
	}
	ioctl(fd_control, EM8300_IOCTL_SET_ASPECTRATIO, &ioval);
	
	if (format != IMGFMT_MPEGPES) {
		size = s_width * s_height;
		picture_data[0] = malloc((size * 3) / 2);
		picture_data[1] = picture_data[0] + size;
		picture_data[2] = picture_data[1] + size / 4;
		
		picture_linesize[0] = s_width;
		picture_linesize[1] = s_width / 2;
		picture_linesize[2] = s_width / 2;
#ifdef USE_LIBFAME
		fame_ctx = fame_open();
		if (!fame_ctx) {
			printf("VO: [dxr3] Cannot open libFAME!\n");
			return -1;
		}

		fame_params.width = s_width;
		fame_params.height = s_height;
		fame_params.coding = "I";
		fame_params.quality = 100;
		fame_params.bitrate = 0;
		fame_params.slices_per_frame = 1;
		fame_params.frames_per_sequence = (int) round(vo_fps);
		fame_params.shape_quality = 100;
		fame_params.search_range = 8;
		fame_params.verbose = 0;
		fame_params.profile = NULL;
		
		if (vo_fps < 24.0) {
		    fame_params.frame_rate_num = 24000;
		    fame_params.frame_rate_den = 1001;
		} else if (vo_fps < 25.0) {
		    fame_params.frame_rate_num = 24;
		    fame_params.frame_rate_den = 1;
		} else if (vo_fps < 29.0) {
		    fame_params.frame_rate_num = 25;
		    fame_params.frame_rate_den = 1;
		} else if (vo_fps < 30.0) {
		    fame_params.frame_rate_num = 30000;
		    fame_params.frame_rate_den = 1001;
		} else if (vo_fps < 50.0) {
		    fame_params.frame_rate_num = 30;
		    fame_params.frame_rate_den = 1;
		} else if (vo_fps < 55.0) {
		    fame_params.frame_rate_num = 50;
		    fame_params.frame_rate_den = 1;
		} else if (vo_fps < 60.0) {
		    fame_params.frame_rate_num = 60000;
		    fame_params.frame_rate_den = 1001;
		} else {
		    fame_params.frame_rate_num = 60;
		    fame_params.frame_rate_den = 1;
		}
		
		outbuf = malloc(100000);
		fame_init(fame_ctx, &fame_params, outbuf, 100000);

		fame_yuv.w = s_width;
		fame_yuv.h = s_height;
		fame_yuv.y = picture_data[0];
		fame_yuv.u = picture_data[1];
		fame_yuv.v = picture_data[2];
#elif USE_LIBAVCODEC
		avc_codec = avcodec_find_encoder(CODEC_ID_MPEG1VIDEO);
		if (!avc_codec) {
			printf("VO: [dxr3] Unable to find mpeg1video codec\n");
			uninit();
			return -1;
		}
		avc_context = malloc(sizeof(AVCodecContext));
		memset(avc_context, 0, sizeof(avc_context));
		avc_context->width = s_width;
		avc_context->height = s_height;
		ioctl(fd_control, EM8300_IOCTL_GET_VIDEOMODE, &ioval);
		if (ioval == EM8300_VIDEOMODE_NTSC) {
			avc_context->gop_size = 18;
		} else {
			avc_context->gop_size = 15;
		}
		avc_context->frame_rate = (int) vo_fps * FRAME_RATE_BASE;
		avc_context->bit_rate = 8e6;
		avc_context->flags = CODEC_FLAG_HQ | CODEC_FLAG_QSCALE;
		avc_context->quality = 2;
		avc_context->pix_fmt = PIX_FMT_YUV420P;
		if (avcodec_open(avc_context, avc_codec) < 0) {
			printf("VO: [dxr3] Unable to open codec\n");
			uninit();
			return -1;
		}
		/* Create a pixel buffer and set up pointers for color components */
		memset(&avc_picture, 0, sizeof(avc_picture));
		avc_picture.linesize[0] = picture_linesize[0];
		avc_picture.linesize[1] = picture_linesize[1];
		avc_picture.linesize[2] = picture_linesize[2];
		
		avc_picture.data[0] = picture_data[0];
		avc_picture.data[1] = picture_data[1];
		avc_picture.data[2] = picture_data[2];
#endif
		sws = getSwsContextFromCmdLine(v_width, v_height, img_format, s_width, s_height, IMGFMT_YV12);
		if (!sws) {
			printf("vo_vesa: Can't initialize SwScaler\n");
			return -1;
		}
	
		/* This stuff calculations the relative position of the osd */
		osd_w = s_width;
		osd_h = s_height;

		if (format == IMGFMT_BGR24) {
			yuv2rgb_init(24, MODE_BGR);
		} else {
			yuv2rgb_init(24, MODE_RGB);
		}
		return 0;
	} else if (format == IMGFMT_MPEGPES) {
		printf("VO: [dxr3] Format: MPEG-PES (no conversion needed)\n");
		return 0;
	}

	printf("VO: [dxr3] Format: Unsupported\n");
	uninit();
	return -1;
}

static const vo_info_t* get_info(void)
{
	return &vo_info;
}

static void draw_alpha(int x, int y, int w, int h, unsigned char* src, unsigned char *srca, int srcstride)
{
#if defined(USE_LIBFAME) || defined(USE_LIBAVCODEC)
	vo_draw_alpha_yv12(w, h, src, srca, srcstride,
		picture_data[0] + x + y * picture_linesize[0], picture_linesize[0]);
#endif
}

static void draw_osd(void)
{
	if (img_format != IMGFMT_MPEGPES) {
		vo_draw_text(osd_w, osd_h, draw_alpha);
	}
}

static uint32_t draw_frame(uint8_t * src[])
{
	if (img_format == IMGFMT_MPEGPES) {
		vo_mpegpes_t *p = (vo_mpegpes_t *) src[0];
		
		if (p->id == 0x20) {
			if (!noprebuf) {
				ioctl(fd_spu, EM8300_IOCTL_SPU_SETPTS, &vo_pts);
			}
			write(fd_spu, p->data, p->size);
		} else {
			write(fd_video, p->data, p->size);
		}
		return 0;
	} else {
		int size, srcStride = (img_format == IMGFMT_YUY2) ? (v_width * 2) : (v_width * 3);
		sws->swScale(sws, src, &srcStride, 0, v_height, picture_data, picture_linesize);
		draw_osd();
#ifdef USE_LIBFAME
		size = fame_encode_frame(fame_ctx, &fame_yuv, NULL);
		write(fd_video, outbuf, size);
#else USE_LIBAVCODEC
		size = avcodec_encode_video(avc_context, picture_data[0], avc_outbuf_size, &avc_picture);
		write(fd_video, picture_data[0], size);
#endif
		return 0;
	}
	return -1;
}

static void flip_page(void)
{
	if (!noprebuf) {
		ioctl(fd_video, EM8300_IOCTL_VIDEO_SETPTS, &vo_pts);
	}
	if (img_format == IMGFMT_YV12) {
#ifdef USE_LIBFAME
		int size = fame_encode_frame(fame_ctx, &fame_yuv, NULL);
		write(fd_video, outbuf, size);
#elif USE_LIBAVCODEC
		int size = avcodec_encode_video(avc_context, picture_data[0], avc_outbuf_size, &avc_picture);
		if (!noprebuf) {
			ioctl(fd_video, EM8300_IOCTL_VIDEO_SETPTS, &vo_pts);
		}
		write(fd_video, picture_data[0], size);
#endif
	}
}

static uint32_t draw_slice(uint8_t *srcimg[], int stride[], int w, int h, int x0, int y0)
{
	if (img_format == IMGFMT_YV12) {
		sws->swScale(sws, srcimg, stride, y0, h, picture_data, picture_linesize);
		return 0;
	}
	return -1;
}

static void uninit(void)
{
	printf("VO: [dxr3] Uninitializing\n");
	if (sws) {
		freeSwsContext(sws);
	}
#ifdef USE_LIBFAME
	if (fame_ctx) {
		fame_close(fame_ctx);
	}
#elif USE_LIBAVCODEC
	if (avc_context) {
		avcodec_close(avc_context);
	}
#endif
	if (picture_data[0]) {
		free(picture_data[0]);
	}
	if (fd_video) {
		close(fd_video);
	}
	if (fd_spu) {
		close(fd_spu);
	}
	if (fd_control) {
		close(fd_control);
	}
}

static void check_events(void)
{
}

static uint32_t preinit(const char *arg)
{
	char devname[80];
	int fdflags = O_WRONLY;

#ifdef USE_LIBFAME
	printf("VO: [dxr3] You are using fame, due to a small problem I have to disable prebuffering\n");
	noprebuf = 1;
#else
	/* Open the control interface */
	if (arg && !strcmp("noprebuf", arg)) {
		printf("VO: [dxr3] Disabling prebuffering.\n");
		noprebuf = 1;
		fdflags |= O_NONBLOCK;
	}
#endif	
	if (arg && !noprebuf) {
		printf("VO: [dxr3] Forcing use of device %s\n", arg);
		sprintf(devname, "/dev/em8300-%s", arg);
	} else {
		/* Try new naming scheme by default */
		sprintf(devname, "/dev/em8300-0");
	}
	fd_control = open(devname, fdflags);
	if (fd_control < 1) {
		/* Fall back to old naming scheme */
		printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300 instead\n", devname);
		sprintf(devname, "/dev/em8300");
		fd_control = open(devname, fdflags);
		if (fd_control < 1) {
			printf("VO: [dxr3] Error opening /dev/em8300 for writing as well!\nBailing\n");
			return -1;
		}
	}

	/* Open the video interface */
	if (arg && !noprebuf) {
		sprintf(devname, "/dev/em8300_mv-%s", arg);
	} else {
		/* Try new naming scheme by default */
		sprintf(devname, "/dev/em8300_mv-0");
	}
	fd_video = open(devname, fdflags);
	if (fd_video < 0) {
		/* Fall back to old naming scheme */
		printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300_mv instead\n", devname);
		sprintf(devname, "/dev/em8300_mv");
		fd_video = open(devname, fdflags);
		if (fd_video < 0) {
			printf("VO: [dxr3] Error opening /dev/em8300_mv for writing as well!\nBailing\n");
			uninit();
			return -1;
		}
	} else {
		printf("VO: [dxr3] Opened %s\n", devname);
	}
	strcpy(fdv_name, devname);
	
	/* Open the subpicture interface */
	if (arg && !noprebuf) {
		sprintf(devname, "/dev/em8300_sp-%s", arg);
	} else {
		/* Try new naming scheme by default */
		sprintf(devname, "/dev/em8300_sp-0");
	}
	fd_spu = open(devname, fdflags);
	if (fd_spu < 0) {
		/* Fall back to old naming scheme */
		printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300_sp instead\n", devname);
		sprintf(devname, "/dev/em8300_sp");
		fd_spu = open(devname, fdflags);
		if (fd_spu < 0) {
			printf("VO: [dxr3] Error opening /dev/em8300_sp for writing as well!\nBailing\n");
			uninit();
			return -1;
		}
	}

#if !defined(USE_LIBFAME) && defined(USE_LIBAVCODEC)
	avcodec_init();
	avcodec_register_all();
#endif
	
	return 0;
}