Mercurial > mplayer.hg
view input/input.h @ 21094:85e28925e490
Remove --with-xvidlibdir.
author | diego |
---|---|
date | Mon, 20 Nov 2006 16:51:09 +0000 |
parents | c549c2de24ce |
children | 5f1bf0a7ed42 |
line wrap: on
line source
// All command IDs #define MP_CMD_SEEK 0 #define MP_CMD_AUDIO_DELAY 1 #define MP_CMD_QUIT 2 #define MP_CMD_PAUSE 3 #define MP_CMD_GRAB_FRAMES 4 #define MP_CMD_PLAY_TREE_STEP 5 #define MP_CMD_PLAY_TREE_UP_STEP 6 #define MP_CMD_PLAY_ALT_SRC_STEP 7 #define MP_CMD_SUB_DELAY 8 #define MP_CMD_OSD 9 #define MP_CMD_VOLUME 10 #define MP_CMD_MIXER_USEMASTER 11 #define MP_CMD_CONTRAST 12 #define MP_CMD_BRIGHTNESS 13 #define MP_CMD_HUE 14 #define MP_CMD_SATURATION 15 #define MP_CMD_FRAMEDROPPING 16 #define MP_CMD_TV_STEP_CHANNEL 17 #define MP_CMD_TV_STEP_NORM 18 #define MP_CMD_TV_STEP_CHANNEL_LIST 19 #define MP_CMD_VO_FULLSCREEN 20 #define MP_CMD_SUB_POS 21 #define MP_CMD_DVDNAV 22 #define MP_CMD_SCREENSHOT 23 #define MP_CMD_PANSCAN 24 #define MP_CMD_MUTE 25 #define MP_CMD_LOADFILE 26 #define MP_CMD_LOADLIST 27 #define MP_CMD_VF_CHANGE_RECTANGLE 28 #define MP_CMD_GAMMA 29 #define MP_CMD_SUB_VISIBILITY 30 // #define MP_CMD_VOBSUB_LANG 31 // combined with SUB_SELECT #define MP_CMD_MENU 32 #define MP_CMD_SET_MENU 33 #define MP_CMD_GET_TIME_LENGTH 34 #define MP_CMD_GET_PERCENT_POS 35 #define MP_CMD_SUB_STEP 36 #define MP_CMD_TV_SET_CHANNEL 37 #define MP_CMD_EDL_MARK 38 #define MP_CMD_SUB_ALIGNMENT 39 #define MP_CMD_TV_LAST_CHANNEL 40 #define MP_CMD_OSD_SHOW_TEXT 41 #define MP_CMD_TV_SET_FREQ 42 #define MP_CMD_TV_SET_NORM 43 #define MP_CMD_TV_SET_BRIGHTNESS 44 #define MP_CMD_TV_SET_CONTRAST 45 #define MP_CMD_TV_SET_HUE 46 #define MP_CMD_TV_SET_SATURATION 47 #define MP_CMD_GET_VO_FULLSCREEN 48 #define MP_CMD_GET_SUB_VISIBILITY 49 #define MP_CMD_SUB_FORCED_ONLY 50 #define MP_CMD_VO_ONTOP 51 #define MP_CMD_SUB_SELECT 52 #define MP_CMD_VO_ROOTWIN 53 #define MP_CMD_SWITCH_VSYNC 54 #define MP_CMD_SWITCH_RATIO 55 #define MP_CMD_FRAME_STEP 56 #define MP_CMD_SPEED_INCR 57 #define MP_CMD_SPEED_MULT 58 #define MP_CMD_SPEED_SET 59 #define MP_CMD_RUN 60 #define MP_CMD_SUB_LOG 61 #define MP_CMD_SWITCH_AUDIO 62 #define MP_CMD_GET_TIME_POS 63 #define MP_CMD_SUB_LOAD 64 #define MP_CMD_SUB_REMOVE 65 #define MP_CMD_KEYDOWN_EVENTS 66 #define MP_CMD_VO_BORDER 67 #define MP_CMD_SET_PROPERTY 68 #define MP_CMD_GET_PROPERTY 69 #define MP_CMD_OSD_SHOW_PROPERTY_TEXT 70 #define MP_CMD_SEEK_CHAPTER 71 #define MP_CMD_FILE_FILTER 72 #define MP_CMD_GET_FILENAME 73 #define MP_CMD_GET_VIDEO_CODEC 74 #define MP_CMD_GET_VIDEO_BITRATE 75 #define MP_CMD_GET_VIDEO_RESOLUTION 76 #define MP_CMD_GET_AUDIO_CODEC 77 #define MP_CMD_GET_AUDIO_BITRATE 78 #define MP_CMD_GET_AUDIO_SAMPLES 79 #define MP_CMD_GET_META_TITLE 80 #define MP_CMD_GET_META_ARTIST 81 #define MP_CMD_GET_META_ALBUM 82 #define MP_CMD_GET_META_YEAR 83 #define MP_CMD_GET_META_COMMENT 84 #define MP_CMD_GET_META_TRACK 85 #define MP_CMD_GET_META_GENRE 86 #define MP_CMD_RADIO_STEP_CHANNEL 87 #define MP_CMD_RADIO_SET_CHANNEL 88 #define MP_CMD_RADIO_SET_FREQ 89 #define MP_CMD_SET_MOUSE_POS 90 #define MP_CMD_STEP_PROPERTY 91 #define MP_CMD_RADIO_STEP_FREQ 92 #define MP_CMD_GUI_EVENTS 5000 #define MP_CMD_GUI_LOADFILE 5001 #define MP_CMD_GUI_LOADSUBTITLE 5002 #define MP_CMD_GUI_ABOUT 5003 #define MP_CMD_GUI_PLAY 5004 #define MP_CMD_GUI_STOP 5005 #define MP_CMD_GUI_PLAYLIST 5006 #define MP_CMD_GUI_PREFERENCES 5007 #define MP_CMD_GUI_FULLSCREEN 5008 #define MP_CMD_GUI_SKINBROWSER 5009 #ifdef HAS_DVBIN_SUPPORT #define MP_CMD_DVB_SET_CHANNEL 5101 #endif #define MP_CMD_DVDNAV_UP 1 #define MP_CMD_DVDNAV_DOWN 2 #define MP_CMD_DVDNAV_LEFT 3 #define MP_CMD_DVDNAV_RIGHT 4 #define MP_CMD_DVDNAV_MENU 5 #define MP_CMD_DVDNAV_SELECT 6 #define MP_CMD_DVDNAV_PREVMENU 7 #define MP_CMD_DVDNAV_MOUSECLICK 8 /// Console commands #define MP_CMD_CHELP 7000 #define MP_CMD_CEXIT 7001 #define MP_CMD_CHIDE 7002 // The arg types #define MP_CMD_ARG_INT 0 #define MP_CMD_ARG_FLOAT 1 #define MP_CMD_ARG_STRING 2 #define MP_CMD_ARG_VOID 3 #ifndef MP_CMD_MAX_ARGS #define MP_CMD_MAX_ARGS 10 #endif // Error codes for the drivers // An error occurred but we can continue #define MP_INPUT_ERROR -1 // A fatal error occurred, this driver should be removed #define MP_INPUT_DEAD -2 // No input was available #define MP_INPUT_NOTHING -3 //! Input will be available if you try again #define MP_INPUT_RETRY -4 // For the key's drivers, if possible you can send key up and key down // events. Key up is the default, to send a key down you must use the // OR operator between the key code and MP_KEY_DOWN. #define MP_KEY_DOWN (1<<29) // Use this when the key shouldn't be auto-repeated (like mouse buttons) #define MP_NO_REPEAT_KEY (1<<28) #ifndef MP_MAX_KEY_DOWN #define MP_MAX_KEY_DOWN 32 #endif typedef union mp_cmd_arg_value { int i; float f; char* s; void* v; } mp_cmd_arg_value_t; typedef struct mp_cmd_arg { int type; mp_cmd_arg_value_t v; } mp_cmd_arg_t; typedef struct mp_cmd { int id; char* name; int nargs; mp_cmd_arg_t args[MP_CMD_MAX_ARGS]; int pausing; } mp_cmd_t; typedef struct mp_cmd_bind { int input[MP_MAX_KEY_DOWN+1]; char* cmd; } mp_cmd_bind_t; typedef struct mp_key_name { int key; char* name; } mp_key_name_t; // These typedefs are for the drivers. They are the functions used to retrieve // the next key code or command. // These functions should return the key code or one of the error codes typedef int (*mp_key_func_t)(int fd); // These functions should act like read but they must use our error code (if needed ;-) typedef int (*mp_cmd_func_t)(int fd,char* dest,int size); // These are used to close the driver typedef void (*mp_close_func_t)(int fd); // Set this to grab all incoming key codes extern void (*mp_input_key_cb)(int code); // Should return 1 if the command was processed typedef int (*mp_input_cmd_filter)(mp_cmd_t* cmd, int paused, void* ctx); // This function adds a new key driver. // The first arg is a file descriptor (use a negative value if you don't use any fd) // The second arg tells if we use select on the fd to know if something is available. // The third arg is optional. If null a default function wich reads an int from the // fd will be used. // The last arg can be NULL if nothing is needed to close the driver. The close // function can be used int mp_input_add_cmd_fd(int fd, int select, mp_cmd_func_t read_func, mp_close_func_t close_func); // This removes a cmd driver, you usually don't need to use it. void mp_input_rm_cmd_fd(int fd); // The args are the same as for the key's drivers. If you don't use any valid fd you MUST // give a read_func. int mp_input_add_key_fd(int fd, int select, mp_key_func_t read_func, mp_close_func_t close_func); // As for the cmd one you usually don't need this function. void mp_input_rm_key_fd(int fd); // This function can be used to put a command in the system again. It's used by libmpdemux // when it performs a blocking operation to resend the command it received to the main // loop. int mp_input_queue_cmd(mp_cmd_t* cmd); // This function retrieves the next available command waiting no more than time msec. // If pause is true, the next input will always return a pause command. mp_cmd_t* mp_input_get_cmd(int time, int paused, int peek_only); mp_cmd_t* mp_input_parse_cmd(char* str); /// These filters allow you to process the command before MPlayer. /// If a filter returns a true value mp_input_get_cmd will return NULL. void mp_input_add_cmd_filter(mp_input_cmd_filter, void* ctx); // After getting a command from mp_input_get_cmd you need to free it using this // function void mp_cmd_free(mp_cmd_t* cmd); // This creates a copy of a command (used by the auto repeat stuff). mp_cmd_t* mp_cmd_clone(mp_cmd_t* cmd); // When you create a new driver you should add it in these 2 functions. void mp_input_init(int use_gui); void mp_input_uninit(void); // Interruptible usleep: (used by libmpdemux) int mp_input_check_interrupt(int time);