view libmpcodecs/ad_msadpcm.c @ 36650:8b2c68d6fd89

Enable specifying a font file in the GUI preferences. This has been broken since the introduction of Fontconfig. Since Fontconfig is selecting fonts by font patterns and the GUI does so by selecting a font file, it is necessary to temporarily disable fontconfig font handling if there is a directory separator character found in the name (or pattern) of the font to be used, i.e. assume the font name to be a pattern if and only if it doesn't contain a directory separator character. Thus set option 'fontconfig' depending on font_name. Set it in guiInit() for the font possibly given in a configuration file or on the command line, and set it in mplayerLoadFont() whenever it is affected by GUI preferences settings. (Although the font selection dialog only allows files to be selected, it is possible to simply enter a fontconfig font pattern in the preferences' text entry field - or to enter it directly into the GUI configuration file or to specify on the command line, both of which always is possible.)

/*
 * MS ADPCM decoder
 *
 * This file is responsible for decoding Microsoft ADPCM data.
 * Details about the data format can be found here:
 *   http://www.pcisys.net/~melanson/codecs/
 *
 * Copyright (c) 2002 Mike Melanson
 *
 * This file is part of MPlayer.
 *
 * MPlayer is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#include "config.h"
#include "mp_msg.h"
#include "libavutil/common.h"
#include "libavutil/intreadwrite.h"
#include "mpbswap.h"
#include "ad_internal.h"

static const ad_info_t info =
{
	"MS ADPCM audio decoder",
	"msadpcm",
	"Nick Kurshev",
	"Mike Melanson",
	""
};

LIBAD_EXTERN(msadpcm)

static const int ms_adapt_table[] =
{
  230, 230, 230, 230, 307, 409, 512, 614,
  768, 614, 512, 409, 307, 230, 230, 230
};

static const uint8_t ms_adapt_coeff1[] =
{
  64, 128, 0, 48, 60, 115, 98
};

static const int8_t ms_adapt_coeff2[] =
{
  0, -64, 0, 16, 0, -52, -58
};

#define MS_ADPCM_PREAMBLE_SIZE 6

#define LE_16(x) ((int16_t)AV_RL16(x))

// clamp a number between 0 and 88
#define CLAMP_0_TO_88(x) x = av_clip(x, 0, 88);
// clamp a number within a signed 16-bit range
#define CLAMP_S16(x) x = av_clip_int16(x);
// clamp a number above 16
#define CLAMP_ABOVE_16(x)  if (x < 16) x = 16;
// sign extend a 4-bit value
#define SE_4BIT(x)  if (x & 0x8) x -= 0x10;

static int preinit(sh_audio_t *sh_audio)
{
  sh_audio->audio_out_minsize = sh_audio->wf->nBlockAlign * 4;
  sh_audio->ds->ss_div =
    (sh_audio->wf->nBlockAlign - MS_ADPCM_PREAMBLE_SIZE) * 2;
  sh_audio->audio_in_minsize =
  sh_audio->ds->ss_mul = sh_audio->wf->nBlockAlign;
  return 1;
}

static int init(sh_audio_t *sh_audio)
{
  sh_audio->channels=sh_audio->wf->nChannels;
  sh_audio->samplerate=sh_audio->wf->nSamplesPerSec;
  sh_audio->i_bps = sh_audio->wf->nBlockAlign *
    (sh_audio->channels*sh_audio->samplerate) / sh_audio->ds->ss_div;
  sh_audio->samplesize=2;

  return 1;
}

static void uninit(sh_audio_t *sh_audio)
{
}

static int control(sh_audio_t *sh_audio,int cmd,void* arg, ...)
{
  if(cmd==ADCTRL_SKIP_FRAME){
    demux_read_data(sh_audio->ds, sh_audio->a_in_buffer,sh_audio->ds->ss_mul);
    return CONTROL_TRUE;
  }
  return CONTROL_UNKNOWN;
}

static inline int check_coeff(uint8_t c) {
  if (c > 6) {
    mp_msg(MSGT_DECAUDIO, MSGL_WARN,
      "MS ADPCM: coefficient (%d) out of range (should be [0..6])\n",
      c);
    c = 6;
  }
  return c;
}

static int ms_adpcm_decode_block(unsigned short *output, unsigned char *input,
  int channels, int block_size)
{
  int current_channel = 0;
  int coeff_idx;
  int idelta[2];
  int sample1[2];
  int sample2[2];
  int coeff1[2];
  int coeff2[2];
  int stream_ptr = 0;
  int out_ptr = 0;
  int upper_nibble = 1;
  int nibble;
  int snibble;  // signed nibble
  int predictor;

  if (channels != 1) channels = 2;
  if (block_size < 7 * channels)
    return -1;

  // fetch the header information, in stereo if both channels are present
  coeff_idx = check_coeff(input[stream_ptr]);
  coeff1[0] = ms_adapt_coeff1[coeff_idx];
  coeff2[0] = ms_adapt_coeff2[coeff_idx];
  stream_ptr++;
  if (channels == 2)
  {
    coeff_idx = check_coeff(input[stream_ptr]);
    coeff1[1] = ms_adapt_coeff1[coeff_idx];
    coeff2[1] = ms_adapt_coeff2[coeff_idx];
    stream_ptr++;
  }

  idelta[0] = LE_16(&input[stream_ptr]);
  stream_ptr += 2;
  if (channels == 2)
  {
    idelta[1] = LE_16(&input[stream_ptr]);
    stream_ptr += 2;
  }

  sample1[0] = LE_16(&input[stream_ptr]);
  stream_ptr += 2;
  if (channels == 2)
  {
    sample1[1] = LE_16(&input[stream_ptr]);
    stream_ptr += 2;
  }

  sample2[0] = LE_16(&input[stream_ptr]);
  stream_ptr += 2;
  if (channels == 2)
  {
    sample2[1] = LE_16(&input[stream_ptr]);
    stream_ptr += 2;
  }

  if (channels == 1)
  {
    output[out_ptr++] = sample2[0];
    output[out_ptr++] = sample1[0];
  } else {
    output[out_ptr++] = sample2[0];
    output[out_ptr++] = sample2[1];
    output[out_ptr++] = sample1[0];
    output[out_ptr++] = sample1[1];
  }

  while (stream_ptr < block_size)
  {
    // get the next nibble
    if (upper_nibble)
      nibble = snibble = input[stream_ptr] >> 4;
    else
      nibble = snibble = input[stream_ptr++] & 0x0F;
    upper_nibble ^= 1;
    SE_4BIT(snibble);

    // should this really be a division and not a shift?
    // coefficients were originally scaled by for, which might have
    // been an optimization for 8-bit CPUs _if_ a shift is correct
    predictor = (
      ((sample1[current_channel] * coeff1[current_channel]) +
       (sample2[current_channel] * coeff2[current_channel])) / 64) +
      (snibble * idelta[current_channel]);
    CLAMP_S16(predictor);
    sample2[current_channel] = sample1[current_channel];
    sample1[current_channel] = predictor;
    output[out_ptr++] = predictor;

    // compute the next adaptive scale factor (a.k.a. the variable idelta)
    idelta[current_channel] =
      (ms_adapt_table[nibble] * idelta[current_channel]) / 256;
    CLAMP_ABOVE_16(idelta[current_channel]);

    // toggle the channel
    current_channel ^= channels - 1;
  }

  return (block_size - (MS_ADPCM_PREAMBLE_SIZE * channels)) * 2;
}

static int decode_audio(sh_audio_t *sh_audio,unsigned char *buf,int minlen,int maxlen)
{
  int res;
  if (demux_read_data(sh_audio->ds, sh_audio->a_in_buffer,
    sh_audio->ds->ss_mul) !=
    sh_audio->ds->ss_mul)
      return -1; /* EOF */

  res = ms_adpcm_decode_block(
    (unsigned short*)buf, sh_audio->a_in_buffer,
    sh_audio->wf->nChannels, sh_audio->wf->nBlockAlign);
  return res < 0 ? res : 2 * res;
}