Mercurial > mplayer.hg
view libvo/vo_svga.c @ 11810:8cce53dd235f
Have the MOV demuxer recognize and display (via MPINFO) registered ISO
and other major brands instead of the usual "Unknown major brand" from
only having "isom" defined.
patch by Shan <sweber@slingshot.co.nz>, approved by Alex
author | diego |
---|---|
date | Tue, 20 Jan 2004 04:59:48 +0000 |
parents | 0d24c99199e2 |
children | e047e70a9767 |
line wrap: on
line source
/* Video driver for SVGAlib by Zoltan Mark Vician <se7en@sch.bme.hu> Code started: Mon Apr 1 23:25:47 2001 Some changes by Matan Ziv-Av <matan@svgalib.org> Compleat rewrite by Ivan Kalvachev 19 Mar 2003: Wrangings: - 1bpp doesn't work right for me with '-double' and svgalib 1.4.3, but works OK with svgalib 1.9.17 - The HW acceleration is not tested - svgalibs supports few chipsets, and i don't have any of them. If it works for you then let me know. I will remove this warning after confirm its status. - retrace sync works only in doublebuffer mode. - the retrace sync may slow down decoding a lot - mplayer is blocked while waiting for retrace - denoise3d fails to find common colorspace, use -vf denoise3d,scale TODO: - let choose_best_mode take aspect into account - set palette from mpi->palette or mpi->plane[1] - make faster OSD black bars clear - need some OSD changes - Make nicer CONFIG parsing - change video mode logical width to match img->stride[0] - for HW only */ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <vga.h> #include <limits.h> #include "config.h" #include "video_out.h" #include "video_out_internal.h" #include "fastmemcpy.h" #include "osdep/getch2.h" #ifdef CONFIG_VIDIX #include "vosub_vidix.h" #endif #include "sub.h" #include "../mp_msg.h" //#include "../mp_image.h" #include <assert.h> //silence warnings, probably it have to go in some global header #define UNUSED(x) ((void)(x)) extern int vo_doublebuffering; extern int vo_directrendering; extern int vo_dbpp; extern int verbose; static uint32_t query_format(uint32_t format); static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src, unsigned char *srca, int stride); static uint32_t get_image(mp_image_t *mpi); #define MAXPAGES 16 #define PAGE_EMPTY 0 #define PAGE_BUSY 1 #define CAP_ACCEL_CLEAR 8 #define CAP_ACCEL_PUTIMAGE 4 #define CAP_ACCEL_BACKGR 2 #define CAP_LINEAR 1 static uint8_t zerobuf[8192];//used when clear screen with vga_draw static int squarepix; static int force_vm=0; static int force_native=0; static int sync_flip=0; static int blackbar_osd=0; static int cpage,max_pages,old_page; static vga_modeinfo * modeinfo; static int mode_stride; //keep it in case of vga_setlogicalwidth static int stride_granularity; //not yet used static int mode_bpp; static int mode_capabilities; static int image_width,image_height; // used by OSD static int x_pos, y_pos; static struct { int yoffset;//y position of the page int doffset;//display start of the page void * vbase;//memory start address of the page int locks; }PageStore[MAXPAGES]; static vo_info_t info = { "SVGAlib", "svga", "Ivan Kalvachev <iive@users.sf.net>", "" }; #ifdef CONFIG_VIDIX static char vidix_name[32] = ""; static vidix_grkey_t gr_key; #endif LIBVO_EXTERN(svga) //return number of 1'st free page or -1 if no free one static inline int page_find_free(){ int i; for(i=0;i<max_pages;i++) if(PageStore[i].locks == PAGE_EMPTY) return i; return -1; } static uint32_t preinit(const char *arg) { int i; char s[64]; getch2_disable(); memset(zerobuf,0,sizeof(zerobuf)); force_vm=force_native=squarepix=0; sync_flip=vo_vsync; blackbar_osd=0; if(arg)while(*arg) { #ifdef CONFIG_VIDIX if(memcmp(arg,"vidix",5)==0) { i=6; while(arg[i] && arg[i]!=':') i++; strncpy(vidix_name, arg+6, i-6); vidix_name[i-5]=0; if(arg[i]==':')i++; arg+=i; vidix_preinit(vidix_name, &video_out_svga); } #endif if(!strncmp(arg,"sq",2)) { squarepix=1; arg+=2; if( *arg == ':' ) arg++; } if(!strncmp(arg,"native",6)) { force_native=1; arg+=6; if( *arg == ':' ) arg++; } if(!strncmp(arg,"bbosd",5)) { blackbar_osd=1; arg+=5; if( *arg == ':' ) arg++; } if(!strncmp(arg,"retrace",7)) { sync_flip=1; arg+=7; if( *arg == ':' ) arg++; } if(*arg) { i=0; while(arg[i] && arg[i]!=':')i++; if(i<64){ strncpy(s, arg, i); s[i]=0; force_vm=vga_getmodenumber(s); if(force_vm>0) { if(verbose) printf("vo_svga: Forcing mode %i\n",force_vm); }else{ force_vm = 0; } } arg+=i; if(*arg==':')arg++; } } vga_init(); return 0; } static void svga_clear_box(int x,int y,int w,int h){ uint8_t * rgbplane; int i; if (mode_capabilities&CAP_ACCEL_CLEAR){ if(verbose > 2) printf("vo_svga: clearing box %d,%d - %d,%d with HW acceleration\n", x,y,w,h); if(mode_capabilities&CAP_ACCEL_BACKGR) vga_accel(ACCEL_SYNC); vga_accel(ACCEL_SETFGCOLOR,0);//black vga_accel(ACCEL_FILLBOX,x,y,w,h); return; } if (mode_capabilities & CAP_LINEAR){ if(verbose > 2) printf("vo_svga: clearing box %d,%d - %d,%d with memset\n",x,y,w,h); rgbplane=PageStore[0].vbase + (y*mode_stride) + (x*modeinfo->bytesperpixel); for(i=0;i<h;i++){ //i'm afraid that memcpy is better optimized than memset;) memcpy(rgbplane,zerobuf,w*modeinfo->bytesperpixel); // memset(rgbplane,0,w*modeinfo->bytesperpixel); rgbplane+=mode_stride; } return; } //native if(verbose > 2) printf("vo_svga: clearing box %d,%d - %d,%d with native draw \n",x,y,w,h); if(modeinfo->bytesperpixel!=0) w*=modeinfo->bytesperpixel; for(i=0;i<h;i++){ vga_drawscansegment(zerobuf,x,y+i,w); } }; static uint32_t svga_draw_image(mp_image_t *mpi){ int i,x,y,w,h; int stride; uint8_t *rgbplane, *base; int bytesperline; int page; if(mpi->flags & MP_IMGFLAG_DIRECT){ if(verbose > 2) printf("vo_svga: drawing direct rendered surface\n"); cpage=(uint32_t)mpi->priv; assert((cpage>=0)&&(cpage<max_pages)); return VO_TRUE; //it's already done } // if (mpi->flags&MP_IMGFLAGS_DRAWBACK) // return VO_TRUE;//direct render method 2 //find a free page to draw into //if there is no one then use the current one page = page_find_free(); if(page>=0) cpage=page; PageStore[cpage].locks=PAGE_BUSY; // these variables are used in loops x = mpi->x; y = mpi->y; w = mpi->w; h = mpi->h; stride = mpi->stride[0]; rgbplane = mpi->planes[0] + y*stride + (x*mpi->bpp)/8; x+=x_pos;//center y+=y_pos; if(mpi->bpp >= 8){//for modes<8 use only native if( (mode_capabilities&CAP_ACCEL_PUTIMAGE) && (x==0) && (w==mpi->width) && (stride == mode_stride) ){ //only monolite image can be accelerated w=(stride*8)/mpi->bpp;//we transfer pixels in the stride so the source //ACCELERATE if(verbose>2) printf("vo_svga: using HW PutImage (x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); if(mode_capabilities & CAP_ACCEL_BACKGR) vga_accel(ACCEL_SYNC); vga_accel(ACCEL_PUTIMAGE,x,y+PageStore[cpage].yoffset,w,h,rgbplane); return VO_TRUE; } if( mode_capabilities&CAP_LINEAR){ //DIRECT if(verbose>2) printf("vo_svga: using Direct memcpy (x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); bytesperline=(w*mpi->bpp)/8; base=PageStore[cpage].vbase + (y*mode_stride) + (x*mpi->bpp)/8; for(i=0;i<h;i++){ mem2agpcpy(base,rgbplane,bytesperline); base+=mode_stride; rgbplane+=stride; } return VO_TRUE; } }//(modebpp>=8 //NATIVE { int length; length=(w*mpi->bpp)/8; //one byte per pixel! svgalib innovation if(mpi->imgfmt==IMGFMT_RG4B || mpi->imgfmt==IMGFMT_BG4B) length=w; if(verbose>2) printf("vo_svga: using Native vga_draw(x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); y+=PageStore[cpage].yoffset;//y position of the page beggining for(i=0;i<h;i++){ vga_drawscansegment(rgbplane,x,y+i,length); rgbplane+=stride; } } return VO_TRUE; } int bpp_from_vminfo(vga_modeinfo *vminfo){ switch(vminfo->colors){ case 2: return 1; case 16: return 4; case 256: return 8; case 32768: return 15; case 65536: return 16; case 1<<24: return 8*vminfo->bytesperpixel; } return 0; } int find_best_svga_mode(int req_w,int req_h, int req_bpp){ int badness,prev_badness; int bestmode,lastmode; int i; vga_modeinfo *vminfo; //int best aspect mode // best linear mode // best normal mode (no modeX) prev_badness = 0;//take care of special case below bestmode = 0; //0 is the TEXT mode lastmode = vga_lastmodenumber(); for(i=1;i<=lastmode;i++){ vminfo = vga_getmodeinfo(i); if( vminfo == NULL ) continue; if(verbose>3) printf("vo_svga: testing mode %d (%s)\n",i,vga_getmodename(i)); if( vga_hasmode(i) == 0 ) continue; if( req_bpp != bpp_from_vminfo(vminfo) )continue; if( (vminfo->width < req_w) || (vminfo->height < req_h) ) continue; badness=(vminfo->width * vminfo->height) - (req_h * req_w); //put here aspect calculations if(squarepix) if( vminfo->width*3 != vminfo->height*4 ) continue; if( bestmode==0 || prev_badness >= badness ){//modeX etc... prev_badness=badness; bestmode=i; if(verbose>3) printf("vo_svga: found good mode %d with badness %d\n",i,badness); } } return bestmode; } static uint32_t control(uint32_t request, void *data, ...) { switch (request) { case VOCTRL_QUERY_FORMAT: return query_format(*((uint32_t*)data)); case VOCTRL_DRAW_IMAGE: return svga_draw_image( (mp_image_t *)data); case VOCTRL_GET_IMAGE: return get_image(data); } #ifdef CONFIG_VIDIX if (vidix_name) { switch (request) { case VOCTRL_SET_EQUALIZER: { va_list ap; int value; va_start(ap, data); value = va_arg(ap, int); va_end(ap); return vidix_control(request, data, (int *)value); } case VOCTRL_GET_EQUALIZER: { va_list ap; int *value; va_start(ap, data); value = va_arg(ap, int*); va_end(ap); return vidix_control(request, data, value); } } return vidix_control(request, data); } #endif return VO_NOTIMPL; } // // This function is called to init the video driver for specific mode // static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, uint32_t d_height, uint32_t flags, char *title, uint32_t format) { int32_t req_w = width;// (d_width > 0 ? d_width : width); int32_t req_h = height;// (d_height > 0 ? d_height : height); uint16_t vid_mode = 0; int32_t req_bpp; uint32_t accflags; if(verbose) printf("vo_svga: config(%i, %i, %i, %i, %08x, %s, %08x)\n", width, height, d_width, d_height, flags, title, format); //Only RGB modes supported if (!IMGFMT_IS_RGB(format) && !IMGFMT_IS_BGR(format)) {assert(0);return -1;} req_bpp = IMGFMT_BGR_DEPTH(format); if( vo_dbpp!=0 && vo_dbpp!=req_bpp) {assert(0);return-1;} if(!force_vm) { if (verbose) { printf("vo_svga: Looking for the best resolution...\n"); printf("vo_svga: req_w: %d, req_h: %d, bpp: %d\n",req_w,req_h,req_bpp); } vid_mode=find_best_svga_mode(req_w,req_h,req_bpp); if(vid_mode==0) return 1; modeinfo=vga_getmodeinfo(vid_mode); }else{//force_vm vid_mode=force_vm; if(vga_hasmode(vid_mode) == 0){ printf("vo_svga: forced vid_mode %d (%s) not available\n", vid_mode,vga_getmodename(vid_mode)); return 1; //error; } modeinfo=vga_getmodeinfo(vid_mode); if( (modeinfo->width < req_w) || (modeinfo->height < req_h) ){ printf("vo_svga: forced vid_mode %d (%s) too small\n", vid_mode,vga_getmodename(vid_mode)); return 1; } } mode_bpp=bpp_from_vminfo(modeinfo); printf("vo_svga: vid_mode: %d, %dx%d %dbpp\n", vid_mode,modeinfo->width,modeinfo->height,mode_bpp); if (vga_setmode(vid_mode) == -1) { printf("vo_svga: vga_setmode(%d) failed.\n",vid_mode); uninit(); return 1; // error } /* set 332 palette for 8 bpp */ if(mode_bpp==8){ int i; for(i=0; i<256; i++) vga_setpalette(i, ((i>>5)&7)*9, ((i>>2)&7)*9, (i&3)*21); } /* set 121 palette for 4 bpp */ else if(mode_bpp==4){ int i; for(i=0; i<16; i++) vga_setpalette(i, ((i>>3)&1)*63, ((i>>1)&3)*21, (i&1)*63); } //if we change the logical width, we should know the granularity stride_granularity=8;//according to man vga_logicalwidth if(modeinfo->flags & EXT_INFO_AVAILABLE){ stride_granularity=modeinfo->linewidth_unit; } //look for hardware acceleration mode_capabilities=0;//NATIVE; if(!force_native){//if we want to use only native drawers if(modeinfo->flags & HAVE_EXT_SET){//support for hwaccel interface accflags=vga_ext_set(VGA_EXT_AVAILABLE,VGA_AVAIL_ACCEL); if(accflags & ACCELFLAG_FILLBOX) // clear screen mode_capabilities|=CAP_ACCEL_CLEAR; if(accflags & ACCELFLAG_PUTIMAGE)//support for mem->vid transfer mode_capabilities|=CAP_ACCEL_PUTIMAGE; if((accflags & ACCELFLAG_SETMODE) && (accflags & ACCELFLAG_SYNC)){ vga_accel(ACCEL_SETMODE,BLITS_IN_BACKGROUND); mode_capabilities|=CAP_ACCEL_BACKGR;//can draw in backgraund } } if(modeinfo->flags & IS_LINEAR){ mode_capabilities|=CAP_LINEAR; //don't use bank & vga_draw } else{ if(modeinfo->flags & CAPABLE_LINEAR){ int vid_mem_size; vid_mem_size = vga_setlinearaddressing(); if(vid_mem_size != -1){ modeinfo=vga_getmodeinfo(vid_mode);//sometimes they change parameters mode_capabilities|=CAP_LINEAR; } } } }//fi force native if(mode_capabilities&CAP_LINEAR){ printf("vo_svga: video mode is linear and memcpy could be used for image transfer\n"); } if(mode_capabilities&CAP_ACCEL_PUTIMAGE){ printf("vo_svga: video mode have hardware acceleration and put_image could be used\n"); printf("vo_svga: If it works for you i would like to know \nvo_svga: (send log with `mplayer test.avi -v -v -v -v &> svga.log`). Thx\n"); } //here is the place to handle strides for accel_ modes; mode_stride=modeinfo->linewidth; //we may try to set a bigger stride for video mode that will match the mpi->stride, //this way we will transfer more data, but HW put_image can do it in backgraund! //now let's see how many pages we can use max_pages = modeinfo->maxpixels/(modeinfo->height * modeinfo->width); if(max_pages > MAXPAGES) max_pages = MAXPAGES; if(!vo_doublebuffering) max_pages=1; //fill PageStore structs { int i; uint8_t * GRAPH_MEM; int dof; GRAPH_MEM=vga_getgraphmem(); for(i=0;i<max_pages;i++){ //calculate display offset dof = i * modeinfo->height * modeinfo->width; if(modeinfo->bytesperpixel != 0) dof*=modeinfo->bytesperpixel; //check video chip limitations if( dof != (dof & modeinfo->startaddressrange) ){ max_pages=i;//page 0 will never come here break; } PageStore[i].yoffset = i * modeinfo->height;//starting y offset PageStore[i].vbase = GRAPH_MEM + i*modeinfo->height*mode_stride; //memory base address PageStore[i].doffset = dof; //display offset PageStore[i].locks = PAGE_EMPTY; } } assert(max_pages>0); printf("vo_svga: video mode have %d page(s)\n",max_pages); //15bpp if(modeinfo->bytesperpixel!=0) vga_claimvideomemory(max_pages * modeinfo->height * modeinfo->width * modeinfo->bytesperpixel); else vga_claimvideomemory(max_pages * modeinfo->height * modeinfo->width * mode_bpp / 8); cpage=old_page=0; svga_clear_box(0,0,modeinfo->width,modeinfo->height * max_pages); image_height=req_h; image_width=req_w; x_pos = (modeinfo->width - req_w) / 2; y_pos = (modeinfo->height - req_h) / 2; x_pos &= ~(15); //align x offset position to 16 pixels printf("vo_svga: centering image. start at (%d,%d)\n",x_pos,y_pos); #ifdef CONFIG_VIDIX if(vidix_name[0]){ vidix_init(width, height, x_pos, y_pos, modeinfo->width, modeinfo->height, format, mode_bpp, modeinfo->width,modeinfo->height); printf("vo_svga: Using VIDIX. w=%i h=%i mw=%i mh=%i\n",width,height, modeinfo->width,modeinfo->height); vidix_start(); /*set colorkey*/ if(vidix_grkey_support()){ vidix_grkey_get(&gr_key); gr_key.key_op = KEYS_PUT; if (!(vo_colorkey & 0xFF000000)) { gr_key.ckey.op = CKEY_TRUE; gr_key.ckey.red = (vo_colorkey & 0x00FF0000) >> 16; gr_key.ckey.green = (vo_colorkey & 0x0000FF00) >> 8; gr_key.ckey.blue = vo_colorkey & 0x000000FF; } else gr_key.ckey.op = CKEY_FALSE; vidix_grkey_set(&gr_key); } } #endif vga_setdisplaystart(0); return (0); } static uint32_t draw_slice(uint8_t *image[],int stride[], int w, int h, int x, int y) { assert(0); UNUSED(image);UNUSED(stride); UNUSED(w);UNUSED(h); UNUSED(x);UNUSED(y); return VO_ERROR;//this is yv12 only -> vf_scale should do all transforms } static uint32_t draw_frame(uint8_t *src[]) { assert(0); UNUSED(src); return VO_ERROR;//this one should not be called } static void draw_osd(void) { if(verbose > 3) printf("vo_svga: draw_osd()\n"); //only modes with bytesperpixel>0 can draw OSD if(modeinfo->bytesperpixel==0) return; if(!(mode_capabilities&CAP_LINEAR)) return;//force_native will remove OSD if(blackbar_osd){ //111 //3 4 //222 svga_clear_box(0,0 + PageStore[cpage].yoffset, modeinfo->width, y_pos); svga_clear_box(0, image_height + y_pos + PageStore[cpage].yoffset, modeinfo->width, modeinfo->height-(image_height+ y_pos)); svga_clear_box(0, y_pos + PageStore[cpage].yoffset, x_pos, image_height); svga_clear_box(image_width + x_pos, y_pos + PageStore[cpage].yoffset, modeinfo->width-(x_pos+image_width), image_height); // vo_remove_text(modeinfo->width, modeinfo->height, clear_alpha); vo_draw_text(modeinfo->width, modeinfo->height, draw_alpha); }else{ vo_draw_text(image_width, image_height, draw_alpha); } } static void flip_page(void) { PageStore[old_page].locks=PAGE_EMPTY; PageStore[cpage].locks=PAGE_BUSY; if(verbose > 2) printf("vo_svga: viewing page %d\n",cpage); if(sync_flip && old_page!=cpage){ if(verbose > 2) printf("vo_svga:vga_waitretrace\n"); vga_waitretrace(); } vga_setdisplaystart(PageStore[cpage].doffset); old_page=cpage;//cpage will be overwriten on next draw_image } static void check_events(void) { } static void uninit(void) { #ifdef CONFIG_VIDIX if(vidix_name[0])vidix_term(); #endif vga_setmode(TEXT); } /* --------------------------------------------------------------------- */ static uint32_t query_format(uint32_t format) { int32_t req_bpp,flags; int i,lastmode; vga_modeinfo * vminfo; if (verbose >3) printf("vo_svga: query_format=%X \n",format); //only RGB modes supported if( (!IMGFMT_IS_RGB(format)) && (!IMGFMT_IS_BGR(format)) ) return 0; // Reject different endian #ifdef WORDS_BIGENDIAN if (IMGFMT_IS_BGR(format)) return 0; #else if (IMGFMT_IS_RGB(format)) return 0; #endif //svgalib supports only BG4B! if we want BGR4 we have to emulate it (sw) if( format==IMGFMT_BGR4 || format==IMGFMT_RGB4) return 0; req_bpp = IMGFMT_RGB_DEPTH(format); if( vo_dbpp>0 && vo_dbpp!=req_bpp ) return 0; //support -bpp options //scan all modes lastmode = vga_lastmodenumber(); for(i=1;i<=lastmode;i++){ vminfo = vga_getmodeinfo(i); if( vminfo == NULL ) continue; if( vga_hasmode(i) == 0 ) continue; if( req_bpp != bpp_from_vminfo(vminfo) ) continue; if( (force_vm > 0) && (force_vm != i) ) continue;//quick hack flags = VFCAP_CSP_SUPPORTED| VFCAP_CSP_SUPPORTED_BY_HW| VFCAP_ACCEPT_STRIDE| 0; if(req_bpp>8) flags|=VFCAP_OSD; return flags; } return 0; } static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src, unsigned char *srca, int stride) { char* base; if(verbose>2) printf("vo_svga: draw_alpha(x0=%d,y0=%d,w=%d,h=%d,src=%p,srca=%p,stride=%d\n", x0,y0,w,h,src,srca,stride); if(!blackbar_osd) { //drawing in the image, so place the stuff there x0+=x_pos; y0+=y_pos; } if(verbose>3) printf("vo_svga: OSD draw in page %d\n",cpage); base=PageStore[cpage].vbase + y0*mode_stride + x0*modeinfo->bytesperpixel; switch (mode_bpp) { case 32: vo_draw_alpha_rgb32(w, h, src, srca, stride, base, mode_stride); break; case 24: vo_draw_alpha_rgb24(w, h, src, srca, stride, base, mode_stride); break; case 16: vo_draw_alpha_rgb16(w, h, src, srca, stride, base, mode_stride); break; case 15: vo_draw_alpha_rgb15(w, h, src, srca, stride, base, mode_stride); break; } } static uint32_t get_image(mp_image_t *mpi){ int page; if(!IMGFMT_IS_BGR(mpi->imgfmt) && !IMGFMT_IS_RGB(mpi->imgfmt) ){ assert(0);//should never happen return(VO_FALSE); } if ( ( (mpi->type != MP_IMGTYPE_STATIC) && (mpi->type != MP_IMGTYPE_TEMP)) || (mpi->flags & MP_IMGFLAG_PLANAR) || (mpi->flags & MP_IMGFLAG_YUV) ) return(VO_FALSE); //reading from video memory is horribly slow if( !(mpi->flags & MP_IMGFLAG_READABLE) && vo_directrendering && (mode_capabilities & CAP_LINEAR) ){ //find free page and reserve it page=page_find_free(); if(page >= 0){ PageStore[page].locks=PAGE_BUSY; mpi->flags |= MP_IMGFLAG_DIRECT; mpi->stride[0] = mode_stride; mpi->planes[0] = PageStore[page].vbase + y_pos*mode_stride + (x_pos*mpi->bpp)/8; (int)mpi->priv=page; if(verbose>2) printf("vo_svga: direct render allocated! page=%d\n",page); return(VO_TRUE); } } return(VO_FALSE); }