view TOOLS/qepdvcd.sh @ 28992:947ef23ba798

Test if create_vdp_decoder() might succeed by calling it from config() with a small value for max_reference_frames. This does not make automatic recovery by using software decoder possible, but lets MPlayer fail more graciously on - actually existing - buggy hardware that does not support certain H264 widths when using hardware accelerated decoding (784, 864, 944, 1024, 1808, 1888 pixels on NVIDIA G98) and if the user tries to hardware-decode more samples at the same time than supported. Might break playback of H264 Intra-Only samples on hardware with very little video memory.

#!/bin/bash
#
# QEPDVCD
#
# Most of this stuff comes straight from MPlayer documentation.
# Options are limited only to a small useful subset, if you 
# want more control, RTFM and DIY.
#
# Version:          0.1
#
# Licence:          GPL
#
# Author:           Reynaldo H. Verdejo Pinochet <[e-mail]> 
#
# Script:           MPlayer Sources. Anything supported to vcd/svcd pal/ntsc 
#
# requires:         mencoder
#
# sugests:          vcdimager / cdrecord 
#
# Thanks to:        Carlos Navarro Salas - name author ;)
#					
#

# Defaults

MYNAME=`basename $0`
TARGET="svcd"
ENCQ="2"
ABPS="224"
VBPS="2000"
NORM="NTSC"
SPLIT="0"
TOLERANCE="85"
OUTNAME="mencodedvcd"
SUBFILENAME=0

EDLFILENAME="pass.edl"
HAVESUB=0
WORKDIR="."
RATIOX=4
RATIOY=3

OPTIONS="INPUTFILENAME TARGET ENCQ ABPS VBPS NORM SPLIT TOLERANCE OUTNAME"

usage()
{
echo ""
echo "usage $MYNAME inputfile [options]"
echo ""
echo "Options: [Default value]"
echo ""
echo "-t	Target svcd|vcd [svcd]"
echo "-q	Encoding quality 0|1|2 [2]"
echo "-a	Audio bitrate in kbps [224]"
echo "-v	Video bitrate in kbps [2000 For SVCD, 1150 For VCD]"
echo "-n	Norm NTSC|PAL [NTSC]"
echo "-d	Divide/split movie at given times time1:time2:... [no split]"
echo "-s	Shitty TV screen tolerance %, afects subtitle positioning [85]"
echo "-u	Subtitle file name [No subtitle]"
echo "-o	Output basename [mencodedvcd]"
echo ""
echo "In case you want to use -a/-v please read:"
echo "http://www.mplayerhq.hu/DOCS/HTML/en/menc-feat-vcd-dvd.html"
echo ""
}

test_needed()
{

for i in mencoder; do
	if [ -z "`which $i`" ]; then
		echo "[ERROR] mencoder not found in $PATH!"
		exit 1
	fi
done

}

test_sugested()
{

for i in vcdimager cdrecord; do
	if [ -z "`which $i`" ]; then
		echo "[WARNING] $i not found in $PATH!"
		echo "You'll likely need it after we finish."
		exit 1
	fi
done
}

test_needed
test_sugested

if [ $# -lt 1 ]; then
	echo ""
	echo "[ERROR] Input filename parameter is mandatory."
	echo ""
	usage
	exit 1
fi

case $1 in
	-*)
 		usage
		exit 1
		;;
	*)
		INPUTFILENAME=$1
		shift 1
		;;
esac

while [ "$1"x != "x" ]; do
	case $1 in
		-t)
		TARGET=$2
		shift 1
		;;
		-q)
		ENCQ=$2
		shift 1
		;;
		-a)
		ABPS=$2
		shift 1
		;;
		-v)
		VBPS=$2
		shift 1
		;;
		-n)
		NORM=$2
		shift 1
		;;
		-d)
		SPLIT=$2
		shift 1
		;;
		-s)
		TOLERANCE=$2
		shift 1
		;;
		-u)
		SUBFILENAME="$2"
		HAVESUB=1
		shift 1
		;;
		-o)
		OUTNAME=$2
		shift 1
		;;
	esac
	shift 1
done

echo ""
echo "[STATUS] Will re-encode using the following parameters:"
echo ""
for i in $OPTIONS ; do
	echo "$i ${!i}";
done

# Parameter Sanity Check ###########################################
# We need to check supplied params against known format constraints
####################################################################

if [ $TARGET = "svcd" ]; then
	if [ $ABPS -gt 384 ]; then
		echo "[ERROR] SVCD maximum abitrate is 384kbps."
		exit 1
	fi
	if [ $VBPS -gt 2600 ]; then
		echo "[ERROR] SVCD maximum vbitrate is 2600kbps."
		exit 1
	fi
else [ $TARGET = "vcd" ]
	if [ $ABPS -eq 224 ]; then
		echo "[ERROR] VCD abitrate must be 224kbps."
		exit 1
	fi
	if [ $VBPS -gt 1150 ]; then
		echo "[ERROR] VCD maximum vbitrate is 1150kbps."
		exit 1
	fi
fi

# Set encoding options ##############################################

if [ $TARGET = "svcd" ]; then
	FORMAT="xsvcd"
	VCODEC="mpeg2video"
	VRCMINRATE=4
	VRCMAXRATE=2500
	VRCBUFSIZE=917
	if [ $NORM = "NTSC" ]; then
		SCALEX=480
		SCALEY=480
		KEYINT=18
		OFPS="24000/1001"
		TELECINE=":telecine"
	else [ $NORM = "PAL" ]
		SCALEX=480
		SCALEY=576
		KEYINT=15
		OFPS=25
	fi
else [ $TARGET = "vcd" ]
	FORMAT="xvcd"
	VCODEC="mpeg1video"
	VRCMINRATE=$VBPS
	VRCMAXRATE=$VBPS
	VRCBUFSIZE=327
	if [ $NORM = "NTSC" ]; then
		SCALEX=352
		SCALEY=240
		KEYINT=18
		OFPS="24000/1001"
	else [ $NORM = "PAL" ]
		SCALEX=352
		SCALEY=288
		KEYINT=15
		OFPS=25
	fi
fi

# Start reencoding ###################################################

cd $WORKDIR

if [ $(($HAVESUB+1)) -eq 1 ]; then
	SUBTITLESTRING="/dev/null"
else
	SUBTITLESTRING="$SUBFILENAME"
fi

if [ $SPLIT = "0" ]; then
	CICLES=0
	TIMESTRING=""
else
	if [ -e $EDLFILENAME ]; then
		echo "[ERROR]"
		echo "The -d option needs to generate a temporary file called"
		echo "$EDLFILENAME. You already have one in this directory,"
		echo "please remove/rename it and run $MYNAME again."
		echo ""
		exit 1
	else
		EDLSTRING=$(echo $SPLIT | sed -e s/:/' '/g)
		EDLARRAY=($EDLSTRING)
		CICLES=$(echo $EDLSTRING | wc -w)
		TIMESTRING="-edl $EDLFILENAME -hr-edl-seek"
	fi
fi


for j in $(seq 0 $CICLES); do

	NEWNAME=$OUTNAME"_PART"$j".mpg"
	echo ""
	echo "Making $NEWNAME, wish me luck ;-)"
	echo ""

# Create EDLFILENAME #################################################

	if [ $CICLES -ge 1 ]; then
		for i in $(seq 0 $CICLES)
		do
			if [ $i -eq $j ]; then
				if [ $j -ne 0 ]; then
					echo "0 ${EDLARRAY[$(($i-1))]} 0" > $EDLFILENAME
				fi
				if [ $i -ne $CICLES ]; then
					echo "${EDLARRAY[$(($i))]} 999999 0" >> $EDLFILENAME
				fi
			fi
		done
	fi
		
# Mencoder Time ;-) ###################################################

mencoder \
-ovc lavc -oac lavc -vf expand=:::::$RATIOX/$RATIOY:1,scale=$SCALEX:$SCALEY,harddup \
-srate 44100 -af lavcresample=44100 -lavcopts acodec=mp2:abitrate=$ABPS:vcodec=$VCODEC:\
vbitrate=$VBPS:keyint=$KEYINT:mbd=$ENCQ:vrc_buf_size=$VRCBUFSIZE:vrc_maxrate=$VRCMAXRATE:\
vrc_minrate=$VRCMINRATE:vi_qfactor=0.1:vi_qoffset=1.5:aspect=$RATIOX/$RATIOY -of mpeg \
-mpegopts format=$FORMAT$TELECINE -sub $SUBTITLESTRING -subpos $TOLERANCE -subwidth \
$TOLERANCE -ofps $OFPS $TIMESTRING -o $NEWNAME $INPUTFILENAME

echo "Encoding of $NEWNAME finished."
echo "Run vcdimager -t svcd/vcd $NEWNAME and burn with cdrecord."

done

echo "$(($CICLES+1)) VCD/SVCD file(s) created!!!"
echo "Happy to be of some help ;-) have fun."
exit 0