view libmpcodecs/ad_libmad.c @ 28992:947ef23ba798

Test if create_vdp_decoder() might succeed by calling it from config() with a small value for max_reference_frames. This does not make automatic recovery by using software decoder possible, but lets MPlayer fail more graciously on - actually existing - buggy hardware that does not support certain H264 widths when using hardware accelerated decoding (784, 864, 944, 1024, 1808, 1888 pixels on NVIDIA G98) and if the user tries to hardware-decode more samples at the same time than supported. Might break playback of H264 Intra-Only samples on hardware with very little video memory.
author cehoyos
date Sat, 21 Mar 2009 20:11:05 +0000
parents a1807995e2ab
children 0f1b5b68af32
line wrap: on
line source

// SAMPLE audio decoder - you can use this file as template when creating new codec!

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#include "config.h"

#include "ad_internal.h"

static ad_info_t info =  {
	"libmad mpeg audio decoder",
	"libmad",
	"A'rpi",
	"libmad...",
	"based on Xine's libmad/xine_decoder.c"
};

LIBAD_EXTERN(libmad)

#include <mad.h>

typedef struct mad_decoder_s {

  struct mad_synth  synth; 
  struct mad_stream stream;
  struct mad_frame  frame;
  
  int have_frame;

  int               output_sampling_rate;
  int               output_open;
  int               output_mode;

} mad_decoder_t;

static int preinit(sh_audio_t *sh){

  mad_decoder_t *this = (mad_decoder_t *) malloc(sizeof(mad_decoder_t));
  memset(this,0,sizeof(mad_decoder_t));
  sh->context = this;
  
  mad_synth_init  (&this->synth);
  mad_stream_init (&this->stream);
  mad_frame_init  (&this->frame);
  
  sh->audio_out_minsize=2*4608;
  sh->audio_in_minsize=4096;
  
  return 1;
}

static int read_frame(sh_audio_t *sh){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;
  int len;

while((len=demux_read_data(sh->ds,&sh->a_in_buffer[sh->a_in_buffer_len],
          sh->a_in_buffer_size-sh->a_in_buffer_len))>0){
  sh->a_in_buffer_len+=len;
  while(1){
    int ret;
    mad_stream_buffer (&this->stream, sh->a_in_buffer, sh->a_in_buffer_len);
    ret=mad_frame_decode (&this->frame, &this->stream);
    if (this->stream.next_frame) {
	int num_bytes =
	    (char*)sh->a_in_buffer+sh->a_in_buffer_len - (char*)this->stream.next_frame;
	memmove(sh->a_in_buffer, this->stream.next_frame, num_bytes);
	mp_msg(MSGT_DECAUDIO,MSGL_DBG2,"libmad: %d bytes processed\n",sh->a_in_buffer_len-num_bytes);
	sh->a_in_buffer_len = num_bytes;
    }
    if (ret == 0) return 1; // OK!!!
    // error! try to resync!
    if(this->stream.error==MAD_ERROR_BUFLEN) break;
  }
}
mp_msg(MSGT_DECAUDIO,MSGL_INFO,"Cannot sync MAD frame\n");
return 0;
}

static int init(sh_audio_t *sh){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;

  this->have_frame=read_frame(sh);
  if(!this->have_frame) return 0; // failed to sync...
  
  sh->channels=(this->frame.header.mode == MAD_MODE_SINGLE_CHANNEL) ? 1 : 2;
  sh->samplerate=this->frame.header.samplerate;
  sh->i_bps=this->frame.header.bitrate/8;
  sh->samplesize=2;
  
  return 1;
}

static void uninit(sh_audio_t *sh){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;
  mad_synth_finish (&this->synth);
  mad_frame_finish (&this->frame);
  mad_stream_finish(&this->stream);
  free(sh->context);
}

/* utility to scale and round samples to 16 bits */
static inline signed int scale(mad_fixed_t sample) {
  /* round */
  sample += (1L << (MAD_F_FRACBITS - 16));

  /* clip */
  if (sample >= MAD_F_ONE)
    sample = MAD_F_ONE - 1;
  else if (sample < -MAD_F_ONE)
    sample = -MAD_F_ONE;

  /* quantize */
  return sample >> (MAD_F_FRACBITS + 1 - 16);
}

static int decode_audio(sh_audio_t *sh,unsigned char *buf,int minlen,int maxlen){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;
  int len=0;

  while(len<minlen && len+4608<=maxlen){
    if(!this->have_frame) this->have_frame=read_frame(sh);
    if(!this->have_frame) break; // failed to sync... or EOF
    this->have_frame=0;

    mad_synth_frame (&this->synth, &this->frame);

	{ unsigned int         nchannels, nsamples;
	  mad_fixed_t const   *left_ch, *right_ch;
	  struct mad_pcm      *pcm = &this->synth.pcm;
	  uint16_t            *output = (uint16_t*) buf;

	  nchannels = pcm->channels;
	  nsamples  = pcm->length;
	  left_ch   = pcm->samples[0];
	  right_ch  = pcm->samples[1];

	  len+=2*nchannels*nsamples;
	  buf+=2*nchannels*nsamples;
	  
	  while (nsamples--) {
	    /* output sample(s) in 16-bit signed little-endian PCM */
	    
	    *output++ = scale(*left_ch++);
	    
	    if (nchannels == 2) 
	      *output++ = scale(*right_ch++);

	  }
	}
  }
  
  return len?len:-1;
}

static int control(sh_audio_t *sh,int cmd,void* arg, ...){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;
    // various optional functions you MAY implement:
    switch(cmd){
      case ADCTRL_RESYNC_STREAM:
	this->have_frame=0;
	mad_synth_init  (&this->synth);
	mad_stream_init (&this->stream);
	mad_frame_init  (&this->frame);
	return CONTROL_TRUE;
      case ADCTRL_SKIP_FRAME:
        this->have_frame=read_frame(sh);
	return CONTROL_TRUE;
    }
  return CONTROL_UNKNOWN;
}