view Makefile @ 23572:a00685941686

demux_mkv very long seek fix The seek code searching for the closest position in the index used "int64_t min_diff=0xFFFFFFFL" as the initial "further from the goal than any real alternative" value. The unit is milliseconds so seeks more than about 75 hours past the end of the file would fail to recognize the last index position as the best match. This was triggered in practice by chapter seek code which apparently uses a seek of 1000000000 seconds forward to mean "seek to the end". The practical effect was that trying to seek to the next chapter in a file without chapters made MPlayer block until it finished reading the file from the current position to the end. Fixed by increasing the initial value from FFFFFFF to FFFFFFFFFFFFFFF.

# LINUX Makefile made by A'rpi / Astral
# Some cleanup by LGB: 	* 'make -C dir' instead of 'cd dir;make;cd..'
#			* for loops instead of linear sequence of make directories
#			* some minor problems with make clean and distclean were corrected
#			* DVD support

include config.mak

COMMON_LDFLAGS += $(EXTRA_LIB)\
                  $(EXTRALIBS) \

LDFLAGS_MPLAYER = $(EXTRALIBS_MPLAYER) \
                  $(COMMON_LDFLAGS) \

LDFLAGS_MENCODER = $(EXTRALIBS_MENCODER) \
                   $(COMMON_LDFLAGS) \

SRCS_COMMON = asxparser.c \
              codec-cfg.c \
              cpudetect.c \
              edl.c \
              find_sub.c \
              m_config.c \
              m_option.c \
              m_struct.c \
              mpcommon.c \
              parser-cfg.c \
              playtree.c \
              playtreeparser.c \
              spudec.c \
              sub_cc.c \
              subreader.c \
              vobsub.c \

SRCS_COMMON-$(UNRARLIB) += unrarlib.c

SRCS_MPLAYER = mplayer.c \
               m_property.c \
               mp_fifo.c \
               mp_msg.c \
               mixer.c \
               parser-mpcmd.c \
               subopt-helper.c \
               command.c \

SRCS_MENCODER = mencoder.c \
                mp_msg-mencoder.c \
                parser-mecmd.c \
                xvid_vbr.c \

COMMON_LIBS = libmpcodecs/libmpcodecs.a \
              libaf/libaf.a \
              libmpdemux/libmpdemux.a \
              stream/stream.a \
              libswscale/libswscale.a \
              libvo/libosd.a \

COMMON_LIBS-$(LIBAVFORMAT_A)      += libavformat/libavformat.a
COMMON_LIBS-$(LIBAVCODEC_A)       += libavcodec/libavcodec.a
COMMON_LIBS-$(LIBAVUTIL_A)        += libavutil/libavutil.a
COMMON_LIBS-$(LIBPOSTPROC_A)      += libpostproc/libpostproc.a
COMMON_LIBS-$(WIN32DLL)           += loader/libloader.a
COMMON_LIBS-$(MP3LIB)             += mp3lib/libmp3.a
COMMON_LIBS-$(LIBA52)             += liba52/liba52.a
COMMON_LIBS-$(LIBMPEG2)           += libmpeg2/libmpeg2.a
COMMON_LIBS-$(FAAD_INTERNAL)      += libfaad2/libfaad2.a
COMMON_LIBS-$(TREMOR_INTERNAL)    += tremor/libvorbisidec.a
COMMON_LIBS-$(DVDREAD_INTERNAL)   += dvdread/libdvdread.a
COMMON_LIBS-$(DVDCSS_INTERNAL)    += libdvdcss/libdvdcss.a
COMMON_LIBS-$(ASS)                += libass/libass.a

LIBS_MPLAYER = libvo/libvo.a \
               libao2/libao2.a \
               input/libinput.a \

LIBS_MPLAYER-$(VIDIX)             += vidix/libvidix.a
LIBS_MPLAYER-$(GUI)               += gui/libgui.a
LIBS_MPLAYER-$(LIBMENU)           += libmenu/libmenu.a

LIBS_MENCODER = libmpcodecs/libmpencoders.a \
                libmpdemux/libmpmux.a \

# Having this in libosdep.a is not enough.
OBJS_MPLAYER-$(TARGET_WIN32) += osdep/mplayer-rc.o

ALL_PRG-$(MPLAYER)  += mplayer$(EXESUF)
ALL_PRG-$(MENCODER) += mencoder$(EXESUF)

COMMON_LIBS  += $(COMMON_LIBS-yes)
LIBS_MPLAYER += $(LIBS_MPLAYER-yes)
OBJS_MPLAYER += $(OBJS_MPLAYER-yes)
PARTS        += $(PARTS-yes)
ALL_PRG      += $(ALL_PRG-yes)

COMMON_LIBS += osdep/libosdep.a

MPLAYER_DEPS  = $(OBJS_MPLAYER)  $(OBJS_COMMON) $(LIBS_MPLAYER)  $(COMMON_LIBS)
MENCODER_DEPS = $(OBJS_MENCODER) $(OBJS_COMMON) $(LIBS_MENCODER) $(COMMON_LIBS)

INSTALL_TARGETS-$(MPLAYER)  += install-mplayer  install-mplayer-man
INSTALL_TARGETS-$(MENCODER) += install-mencoder install-mplayer-man
INSTALL_TARGETS-$(GUI)      += install-gui
INSTALL_TARGETS             += $(INSTALL_TARGETS-yes)

PARTS = dvdread \
        gui \
        input \
        liba52 \
        libaf \
        libao2 \
        libass \
        libavcodec \
        libavformat \
        libavutil \
        libdvdcss \
        libfaad2 \
        libmenu \
        libmpcodecs \
        libmpdemux \
        libmpeg2 \
        libpostproc \
        libswscale \
        libvo \
        loader \
        mp3lib \
        osdep \
        stream \
        tremor \
        vidix \


all:	$(ALL_PRG)

dep depend:: help_mp.h version.h codecs.conf.h
	@for a in $(PARTS); do $(MAKE) -C $$a dep; done

include mpcommon.mak

CFLAGS := $(subst -I..,-I.,$(CFLAGS))

libaf/libaf.a:
	$(MAKE) -C libaf

dvdread/libdvdread.a:
	$(MAKE) -C dvdread

libdvdcss/libdvdcss.a:
	$(MAKE) -C libdvdcss

loader/libloader.a:
	$(MAKE) -C loader

libass/libass.a:
	$(MAKE) -C libass

libmpdemux/libmpdemux.a:
	$(MAKE) -C libmpdemux libmpdemux.a

libmpdemux/libmpmux.a:
	$(MAKE) -C libmpdemux libmpmux.a

stream/stream.a:
	$(MAKE) -C stream

libmpcodecs/libmpcodecs.a:
	$(MAKE) -C libmpcodecs

libavutil/libavutil.a:
	$(MAKE) -C libavutil

libavcodec/libavcodec.a:
	$(MAKE) -C libavcodec

libpostproc/libpostproc.a:
	$(MAKE) -C libpostproc

libavformat/libavformat.a:
	$(MAKE) -C libavformat

libswscale/libswscale.a:
	$(MAKE) -C libswscale

libmpeg2/libmpeg2.a:
	$(MAKE) -C libmpeg2

libvo/libvo.a:
	$(MAKE) -C libvo libvo.a

libvo/libosd.a:
	$(MAKE) -C libvo libosd.a

libao2/libao2.a:
	$(MAKE) -C libao2

liba52/liba52.a:
	$(MAKE) -C liba52

libfaad2/libfaad2.a:
	$(MAKE) -C libfaad2

mp3lib/libmp3.a:
	$(MAKE) -C mp3lib

tremor/libvorbisidec.a:
	$(MAKE) -C tremor

vidix/libvidix.a:
	$(MAKE) -C vidix

gui/libgui.a:
	$(MAKE) -C gui

osdep/libosdep.a:
	$(MAKE) -C osdep

osdep/mplayer-rc.o: version.h
	$(MAKE) -C osdep mplayer-rc.o

input/libinput.a:
	$(MAKE) -C input

libmenu/libmenu.a:
	$(MAKE) -C libmenu

mplayer$(EXESUF): $(MPLAYER_DEPS)
	$(CC) -o $@ $^ $(LDFLAGS_MPLAYER)

mencoder$(EXESUF): $(MENCODER_DEPS)
	$(CC) -o $@ $^ $(LDFLAGS_MENCODER)

codec-cfg$(EXESUF): codec-cfg.c codec-cfg.h help_mp.h
	$(HOST_CC) -I. -DCODECS2HTML $< -o $@

codecs.conf.h: codec-cfg$(EXESUF) etc/codecs.conf
	./codec-cfg$(EXESUF) ./etc/codecs.conf > $@

codec-cfg.o: codecs.conf.h

codecs2html$(EXESUF): mp_msg.o
	$(CC) -DCODECS2HTML codec-cfg.c $^ -o $@

codec-cfg-test$(EXESUF): codecs.conf.h codec-cfg.h mp_msg.o osdep/getch2.o
	$(CC) -I. -DTESTING codec-cfg.c mp_msg.o osdep/getch2.o -ltermcap -o $@

install: install-dirs $(INSTALL_TARGETS)

install-dirs:
	$(INSTALL) -d $(BINDIR)
	$(INSTALL) -d $(DATADIR)
	$(INSTALL) -d $(MANDIR)/man1
	$(INSTALL) -d $(CONFDIR)
	if test -f $(CONFDIR)/codecs.conf ; then mv -f $(CONFDIR)/codecs.conf $(CONFDIR)/codecs.conf.old ; fi

install-mplayer: mplayer$(EXESUF)
	$(INSTALL) -m 755 $(INSTALLSTRIP) mplayer$(EXESUF) $(BINDIR)

install-mplayer-man:
	for i in $(MAN_LANG); do \
		if test "$$i" = en ; then \
			$(INSTALL) -c -m 644 DOCS/man/en/mplayer.1 $(MANDIR)/man1/ ; \
		else \
			$(INSTALL) -d $(MANDIR)/$$i/man1 ; \
			$(INSTALL) -c -m 644 DOCS/man/$$i/mplayer.1 $(MANDIR)/$$i/man1/ ; \
		fi ; \
	done

install-mencoder: mencoder$(EXESUF)
	$(INSTALL) -m 755 $(INSTALLSTRIP) mencoder$(EXESUF) $(BINDIR)
	for i in $(MAN_LANG); do \
		if test "$$i" = en ; then \
			cd $(MANDIR)/man1 && ln -sf mplayer.1 mencoder.1 ; \
		else \
			cd $(MANDIR)/$$i/man1 && ln -sf mplayer.1 mencoder.1 ; \
		fi ; \
	done

install-gui:
	-ln -sf mplayer$(EXESUF) $(BINDIR)/gmplayer$(EXESUF)
	$(INSTALL) -d $(DATADIR)/skins
	@echo "*** Download skin(s) at http://www.mplayerhq.hu/design7/dload.html"
	@echo "*** for GUI, and extract to $(DATADIR)/skins/"
	$(INSTALL) -d $(prefix)/share/pixmaps
	$(INSTALL) -m 644 etc/mplayer.xpm $(prefix)/share/pixmaps/
	$(INSTALL) -d $(prefix)/share/applications
	$(INSTALL) -m 644 etc/mplayer.desktop $(prefix)/share/applications/

uninstall:
	-rm -f $(BINDIR)/mplayer$(EXESUF) $(BINDIR)/gmplayer$(EXESUF)
	-rm -f $(BINDIR)/mencoder$(EXESUF)
	-rm -f $(MANDIR)/man1/mencoder.1 $(MANDIR)/man1/mplayer.1
	-rm -f $(prefix)/share/pixmaps/mplayer.xpm
	-rm -f $(prefix)/share/applications/mplayer.desktop
	for l in $(MAN_LANG); do \
	  if test "$$l" != "en"; then \
	    rm -f $(MANDIR)/$$l/man1/mplayer.1    \
	          $(MANDIR)/$$l/man1/mencoder.1   \
	          $(MANDIR)/$$l/man1/gmplayer.1 ; \
	  fi ; \
	done

clean::
	-rm -f mplayer$(EXESUF) mencoder$(EXESUF) codec-cfg$(EXESUF) \
	  codecs2html$(EXESUF) codec-cfg-test$(EXESUF) cpuinfo$(EXESUF) \
	  codecs.conf.h help_mp.h version.h
	@for a in $(PARTS); do $(MAKE) -C $$a clean; done

distclean:: doxygen_clean
	@for a in $(PARTS); do $(MAKE) -C $$a distclean; done
	-rm -f configure.log config.mak config.h

strip:
	strip -s $(ALL_PRG)

# ./configure must be rerun if it changed
config.h: configure
	@echo "############################################################"
	@echo "####### Please run ./configure again - it's changed! #######"
	@echo "############################################################"

# rebuild at every config.h/config.mak/Makefile change:
version.h: config.h config.mak Makefile
	./version.sh `$(CC) -dumpversion`

doxygen:
	doxygen DOCS/tech/Doxyfile

doxygen_clean:
	-rm -rf DOCS/tech/doxygen

help_mp.h: help/help_mp-en.h $(HELP_FILE)
	@echo '// WARNING! This is a generated file. Do NOT edit.' > help_mp.h
	@echo '// See the help/ subdir for the editable files.' >> help_mp.h
ifeq ($(CHARSET),)
	@echo '#include "$(HELP_FILE)"' >> help_mp.h
else
	iconv -f UTF-8 -t $(CHARSET) "$(HELP_FILE)" >> help_mp.h
endif

ifneq ($(HELP_FILE),help/help_mp-en.h)
	@echo "Adding untranslated messages to help_mp.h"
	@echo '// untranslated messages from the English master file:' >> help_mp.h
	@help/help_diff.sh $(HELP_FILE) < help/help_mp-en.h >> help_mp.h
endif

# explicit dependencies to force version.h to be built even if .depend is missing
mplayer.o mencoder.o vobsub.o: version.h

# temporary measure to make sure help_mp.h is built. we desperately need correct deps!
$(MPLAYER_DEPS) $(MENCODER_DEPS): help_mp.h

#
# the following lines provide _partial_ dependency information
# for the 'library' directories under main dir, in order to cause
# the build process to recursively descend into them if something
# has changed. ideally this will be replaced with a single
# nonrecursive makefile for the whole project.
#
# Now all directories are recursed by default because these rules do not
# consider dependencies on files in other directories, while the recursively
# invoked Makefiles do. Conditional recursion only to the directories with
# changed files can be enabled by creating a file named ".norecurse" and
# optionally giving it a timestamp in the past. Directories whose .a files
# are newer than the timestamp and newer than other files in the directory
# will not be recursed.
.norecurse:

libvo/libvo.a: .norecurse $(wildcard libvo/*.[ch])
libvo/libosd.a: .norecurse $(wildcard libvo/*.[ch])
libao2/libao2.a: .norecurse $(wildcard libao2/*.[ch])
osdep/libosdep.a: .norecurse $(wildcard osdep/*.[ch])
input/libinput.a: .norecurse $(wildcard input/*.[ch])

libmenu/libmenu.a: .norecurse $(wildcard libmenu/*.[ch])
libaf/libaf.a: .norecurse $(wildcard libaf/*.[ch])
dvdread/libdvdread.a: .norecurse $(wildcard dvdread/*.[ch])
libdvdcss/libdvdcss.a: .norecurse $(wildcard libdvdcss/*.[ch])

libmpdemux/libmpdemux.a: .norecurse $(wildcard libmpdemux/*.[ch])
libmpdemux/libmpmux.a: .norecurse $(wildcard libmpdemux/*.[ch])
stream/stream.a: .norecurse $(wildcard stream/*.[ch] stream/*/*.[ch])
libmpcodecs/libmpcodecs.a: .norecurse $(wildcard libmpcodecs/*.[ch]) $(wildcard libmpcodecs/native/*.[ch])
libmpcodecs/libmpencoders.a: .norecurse $(wildcard libmpcodecs/*.[ch])

libavutil/libavutil.a: .norecurse $(wildcard libavutil/*.[ch])
libavcodec/libavcodec.a: .norecurse $(wildcard libavcodec/*.[ch] libavcodec/*/*.[chS])
libavformat/libavformat.a: .norecurse $(wildcard libavformat/*.[ch])
libswscale/libswscale.a: .norecurse $(wildcard libswscale/*.[ch])

libmpeg2/libmpeg2.a: .norecurse $(wildcard libmpeg2/*.[ch])
liba52/liba52.a: .norecurse $(wildcard liba52/*.[ch])
mp3lib/libmp3.a: .norecurse $(wildcard mp3lib/*.[ch])
libfaad2/libfaad2.a: .norecurse $(wildcard libfaad2/*.[ch] libfaad2/*/*.[ch])

loader/libloader.a: .norecurse $(wildcard loader/*.[chSs])
vidix/libvidix.a: .norecurse $(wildcard vidix/*.[ch])
gui/libgui.a: .norecurse $(wildcard gui/*.[ch] gui/*/*.[ch] gui/*/*/*.[ch])

libass/libass.a: .norecurse $(wildcard libass/*.[ch])

.PHONY: all install* uninstall strip doxygen doxygen_clean