view Makefile @ 7743:a280cc3087ea

All right: The patch adresses two issues which I found, when I analyzed the input from some DVDs with known subtitle-dropouts: 1. The packet-size at the beginning of the packet, which is used to check, whether we got all fragments, is sometimes one byte too long. It seems to be always padded to an even number, while the actual size can be odd. 2. The original algorythm used to assemble the fragments relies on the timestamps to check, whether a new packet begins. This has proven to be unrelieable on some disks. So instead, I use the timestamp only to check, whether it's been too long (defined as 0,01sec) since the last fragment, which is probably indicating a broken packet, and normaly starting a new packet when the last one has been finished. patch by Christof Buergi <[e-mail]>

# LINUX Makefile made by A'rpi / Astral
# Some cleanup by LGB: 	* 'make -C dir' instead of 'cd dir;make;cd..'
#			* for loops instead of linear sequence of make directories
#			* some minor problems with make clean and distclean were corrected
#			* DVD support

include config.mak

PRG = mplayer
PRG_FIBMAP = fibmap_mplayer
PRG_CFG = codec-cfg
PRG_MENCODER = mencoder

# Do not strip the binaries at installation
ifeq ($(STRIPBINARIES),yes)
INSTALLSTRIP = -s
endif


# These subdirectories require installation due to binaries within them.
ifeq ($(VIDIX),yes)
SUBDIRS += libdha vidix
DO_MAKE = @ for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done
endif

# a BSD compatible 'install' program
INSTALL = install

SRCS_COMMON = cpudetect.c codec-cfg.c cfgparser.c my_profile.c spudec.c playtree.c playtreeparser.c asxparser.c vobsub.c subreader.c sub_cc.c find_sub.c
SRCS_MENCODER = mencoder.c mp_msg-mencoder.c $(SRCS_COMMON) libao2/afmt.c divx4_vbr.c libvo/aclib.c libvo/osd.c libvo/sub.c libvo/font_load.c libvo/font_load_ft.c me-opt-reg.c xvid_vbr.c
SRCS_MPLAYER = mplayer.c mp_msg.c $(SRCS_COMMON) mixer.c mp-opt-reg.c

ifeq ($(UNRARLIB),yes)
SRCS_COMMON += unrarlib.c
endif

OBJS_MENCODER = $(SRCS_MENCODER:.c=.o)
OBJS_MPLAYER = $(SRCS_MPLAYER:.c=.o)

VO_LIBS = libvo/libvo.a
VO_INC = -Ilibvo
V_LIBS = $(SDL_LIB) $(GGI_LIB) $(AA_LIB) $(X_LIB) $(MP1E_LIB) $(MLIB_LIB) $(SVGA_LIB) $(DIRECTFB_LIB) $(DIRECTX_LIB)

AO_LIBS = libao2/libao2.a
A_LIBS = $(ALSA_LIB) $(ARTS_LIB) $(NAS_LIB) $(MAD_LIB) $(VORBIS_LIB) $(FAAD_LIB) $(SGIAUDIO_LIB)

CODEC_LIBS = libmpcodecs/libmpcodecs.a mp3lib/libMP3.a liba52/liba52.a libmpeg2/libmpeg2.a $(AV_LIB) $(FAME_LIB)
COMMON_LIBS = $(CODEC_LIBS) libaf/libaf.a libmpdemux/libmpdemux.a input/libinput.a postproc/libpostproc.a linux/libosdep.a $(LIB_LOADER) $(FREETYPE_LIB) $(A_LIBS) $(CSS_LIB) $(XVID_LIB) $(DECORE_LIB) $(TERMCAP_LIB)  $(STREAMING_LIB) $(Z_LIB) $(GTK_LIBS) $(PNG_LIB) $(JPEG_LIB) $(LZO_LIB) $(GIF_LIB) $(CDPARANOIA_LIB) $(ARCH_LIB) -lm 
ifeq ($(VIDIX),yes)
MISC_LIBS += -Llibdha -ldha vidix/libvidix.a
endif
CFLAGS = $(OPTFLAGS) -Ilibmpdemux -Iloader $(VO_INC) $(EXTRA_INC) $(CDPARANOIA_INC) $(FREETYPE_INC) $(SDL_INC) # -Wall

PARTS = libmpdemux libmpcodecs mp3lib liba52 libmpeg2 libavcodec libao2 drivers linux postproc input libvo libaf
ifeq ($(VIDIX),yes)
PARTS += libdha vidix
endif
ifeq ($(FAME),yes)
PARTS += libfame
endif
ifeq ($(DVDKIT2),yes)
PARTS += libmpdvdkit2
else
ifeq ($(DVDKIT),yes)
PARTS += libmpdvdkit
endif
endif
ifeq ($(GUI),yes)
PARTS += Gui
endif
ifneq ($(W32_LIB),)
PARTS += loader loader/dshow
endif


LOADER_DEP = $(W32_DEP) $(DS_DEP)
LIB_LOADER = $(W32_LIB) $(DS_LIB)

ALL_PRG = $(PRG)
ifeq ($(MENCODER),yes)
ALL_PRG += $(PRG_MENCODER)
endif
ifeq ($(CSS_USE),yes)
ALL_PRG += $(PRG_FIBMAP)
endif

COMMON_DEPS = $(LOADER_DEP) $(MP1E_DEP) $(AV_DEP) libmpdemux/libmpdemux.a libmpcodecs/libmpcodecs.a libao2/libao2.a liba52/liba52.a mp3lib/libMP3.a libmpeg2/libmpeg2.a linux/libosdep.a postproc/libpostproc.a input/libinput.a libvo/libvo.a libaf/libaf.a

ifeq ($(VIDIX),yes)
COMMON_DEPS += libdha/libdha.so vidix/libvidix.a
endif
ifeq ($(FAME),yes)
COMMON_DEPS += libfame/libfame.a
endif
ifeq ($(DVDKIT2),yes)
ifeq ($(DVDKIT_SHARED),yes)
COMMON_DEPS += libmpdvdkit2/libmpdvdkit.so
else
COMMON_DEPS += libmpdvdkit2/libmpdvdkit.a
endif
endif

ifeq ($(GUI),yes)
COMMON_DEPS += Gui/libgui.a
GUI_LIBS = Gui/libgui.a
endif


.SUFFIXES: .cc .c .o

# .PHONY: $(COMMON_DEPS)

all:	$(ALL_PRG)

.c.o:
	$(CC) -c $(CFLAGS) -o $@ $<

libaf/libaf.a:
	$(MAKE) -C libaf

libmpdvdkit2/libmpdvdkit.a:
	$(MAKE) -C libmpdvdkit2

libmpdvdkit2/libmpdvdkit.so:
	$(MAKE) -C libmpdvdkit2 libmpdvdkit.so

loader/libloader.a:
	$(MAKE) -C loader

libfame/libfame.a:
	$(MAKE) -C libfame

libmpdemux/libmpdemux.a:
	$(MAKE) -C libmpdemux

libmpcodecs/libmpcodecs.a:
	$(MAKE) -C libmpcodecs

loader/dshow/libDS_Filter.a:
	$(MAKE) -C loader/dshow

libavcodec/libavcodec.a:
	$(MAKE) -C libavcodec

libmpeg2/libmpeg2.a:
	$(MAKE) -C libmpeg2

libvo/libvo.a:
	$(MAKE) -C libvo

libao2/libao2.a:
	$(MAKE) -C libao2

liba52/liba52.a:
	$(MAKE) -C liba52

mp3lib/libMP3.a:
	$(MAKE) -C mp3lib

libdha/libdha.so:
	$(MAKE) -C libdha

vidix/libvidix.a:
	$(MAKE) -C vidix

Gui/libgui.a:
	$(MAKE) -C Gui

linux/libosdep.a:
	$(MAKE) -C linux

postproc/libpostproc.a:
	$(MAKE) -C postproc

input/libinput.a:
	$(MAKE) -C input

MPLAYER_DEP = $(OBJS_MPLAYER) $(COMMON_DEPS)
MENCODER_DEP = $(OBJS_MENCODER) $(COMMON_DEPS)

VIDIX_LIBS =
ifeq ($(VIDIX),yes)
VIDIX_LIBS += vidix/libvidix.a
endif

$(PRG):	$(MPLAYER_DEP)
	./darwinfixlib.sh $(MPLAYER_DEP)
	$(CC) $(CFLAGS) -o $(PRG) $(OBJS_MPLAYER) $(VO_LIBS) $(AO_LIBS) $(VIDIX_LIBS) $(GUI_LIBS) $(V_LIBS) $(COMMON_LIBS) $(EXTRA_LIB) $(LIRC_LIB) $(STATIC_LIB) 

$(PRG_FIBMAP): fibmap_mplayer.o
	$(CC) -o $(PRG_FIBMAP) fibmap_mplayer.o

ifeq ($(MENCODER),yes)
$(PRG_MENCODER): $(MENCODER_DEP)
	./darwinfixlib.sh $(MENCODER_DEP) libmpcodecs/libmpencoders.a
	$(CC) $(CFLAGS) -o $(PRG_MENCODER) $(OBJS_MENCODER) libmpcodecs/libmpencoders.a $(COMMON_LIBS) $(EXTRA_LIB) $(ENCORE_LIB) $(MLIB_LIB) $(LIRC_LIB)
endif

# Every mplayer dependency depends on version.h, to force building version.h
# first (in serial mode) before any other of the dependencies for a parallel make
# run.  This is necessary, because the make rule for version.h removes objects
# in a recursive "make distclean" and we must wait for this "make distclean" to
# finish before we can start building new object files.
$(MPLAYER_DEP): version.h
$(MENCODER_DEP): version.h

$(PRG_CFG): version.h codec-cfg.c codec-cfg.h
	$(CC) $(CFLAGS) -g codec-cfg.c mp_msg.c -o $(PRG_CFG) -DCODECS2HTML

install: $(ALL_PRG)
ifeq ($(VIDIX),yes)
	$(DO_MAKE)
endif
	if test ! -d $(BINDIR) ; then mkdir -p $(BINDIR) ; fi
	$(INSTALL) -m 755 $(INSTALLSTRIP) $(PRG) $(BINDIR)/$(PRG)
ifeq ($(GUI),yes)
	-ln -sf $(PRG) $(BINDIR)/gmplayer
endif
	if test ! -d $(MANDIR)/man1 ; then mkdir -p $(MANDIR)/man1; fi
	$(INSTALL) -c -m 644 DOCS/mplayer.1 $(MANDIR)/man1/mplayer.1
ifeq ($(MENCODER),yes)
	$(INSTALL) -m 755 $(INSTALLSTRIP) $(PRG_MENCODER) $(BINDIR)/$(PRG_MENCODER)
	-ln -sf mplayer.1 $(MANDIR)/man1/mencoder.1
endif
	@if test ! -d $(DATADIR) ; then mkdir -p $(DATADIR) ; fi
	@if test ! -d $(DATADIR)/font ; then mkdir -p $(DATADIR)/font ; fi
	@if test ! -f $(DATADIR)/font/font.desc ; then \
	echo "*** Download font at http://www.mplayerhq.hu/homepage/dload.html" ; \
	echo "*** for OSD/Subtitles support and extract to $(DATADIR)/font/" ; \
	fi
ifeq ($(GUI),yes)
	@if test ! -d $(DATADIR)/Skin ; then mkdir -p $(DATADIR)/Skin ; fi
	@echo "*** Download skin(s) at http://www.mplayerhq.hu/homepage/dload.html"
	@echo "*** for GUI, and extract to $(DATADIR)/Skin/"
endif
	@if test ! -d $(CONFDIR) ; then mkdir -p $(CONFDIR) ; fi
	@if test -f $(CONFDIR)/codecs.conf.old ; then mv -f $(CONFDIR)/codecs.conf.old $(CONFDIR)/codecs.conf.older ; fi
	@if test -f $(CONFDIR)/codecs.conf ; then mv -f $(CONFDIR)/codecs.conf $(CONFDIR)/codecs.conf.old ; fi
	$(INSTALL) -c -m 644 etc/codecs.conf $(CONFDIR)/codecs.conf
ifeq ($(DVDKIT_SHARED),yes)
ifeq ($(DVDKIT2),yes)
	if test ! -d $(LIBDIR) ; then mkdir -p $(LIBDIR) ; fi
	$(INSTALL) -m 755 $(INSTALLSTRIP) libmpdvdkit2/libmpdvdkit.so $(LIBDIR)/libmpdvdkit.so
else
ifeq ($(DVDKIT),yes)
	if test ! -d $(LIBDIR) ; then mkdir -p $(LIBDIR) ; fi
	$(INSTALL) -m 755 $(INSTALLSTRIP) libmpdvdkit/libmpdvdkit.so $(LIBDIR)/libmpdvdkit.so
endif
endif
endif
ifeq ($(CSS_USE),yes)
	@echo "The following task requires root privileges. If it fails don't panic,"
	@echo "however it means you can't use fibmap_mplayer."
	@echo "Without this (or without running mplayer as root) you won't be"
	@echo "able to play encrypted DVDs."
	-$(INSTALL) -o 0 -g 0 -m 4755 $(INSTALLSTRIP) $(PRG_FIBMAP) $(BINDIR)/$(PRG_FIBMAP)
endif

uninstall:
	-rm -f $(BINDIR)/$(PRG) $(BINDIR)/gmplayer $(MANDIR)/man1/mplayer.1
	-rm -f $(BINDIR)/$(PRG_FIBMAP)
	-rm -f  $(BINDIR)/$(PRG_MENCODER) $(MANDIR)/man1/mencoder.1
	@echo "Uninstall completed"

clean:
	-rm -f *.o *~ $(OBJS)

distclean:
	-rm -f *~ $(PRG) $(PRG_FIBMAP) $(PRG_MENCODER) $(OBJS)
	-rm -f *.o *.a .depend configure.log
	@for a in $(PARTS); do $(MAKE) -C $$a distclean; done

strip:
	strip -s $(ALL_PRG)

dep:	depend

depend:
	./version.sh `$(CC) -dumpversion`
	$(CC) -MM $(CFLAGS) mplayer.c mencoder.c $(SRCS_MPLAYER) $(SRCS_MENCODER) 1>.depend
	@for a in $(PARTS); do $(MAKE) -C $$a dep; done

# ./configure must be run if it changed in CVS
config.h: configure
	@echo "############################################################"
	@echo "####### Please run ./configure again - it's changed! #######"
	@echo "############################################################"
ifeq ($(wildcard .developer),)
	@exit 1
endif

# do not rebuild after cvs commits if .developer file is present!

# rebuild at every config.h/config.mak change:
version.h:
	./version.sh `$(CC) -dumpversion`
ifeq ($(wildcard .developer),)
	$(MAKE) distclean
endif
	$(MAKE) depend

# rebuild at every CVS update or config/makefile change:
ifeq ($(wildcard .developer),)
ifneq ($(wildcard CVS/Entries),)
version.h: CVS/Entries
endif
version.h: config.h config.mak Makefile
endif

#
# include dependencies to get make to recurse into lib dirs,
# if the user desires such behavior
#
ifneq ($(wildcard .libdeps),)
include .libdeps
endif

#
# include dependency files if they exist
#
ifneq ($(wildcard .depend),)
include .depend
endif