Mercurial > mplayer.hg
view libao2/ao_jack.c @ 14003:a51f75602994
wording
author | diego |
---|---|
date | Sun, 21 Nov 2004 12:42:51 +0000 |
parents | adb9a0d74ca0 |
children | a92101a7eb49 |
line wrap: on
line source
/* * ao_jack - JACK audio output driver for MPlayer * * Kamil Strzelecki < esack at browarek.net > * * This driver is distribuited under terms of GPL * * It uses bio2jack (http://bio2jack.sf.net/). * */ #include <stdio.h> #include <jack/jack.h> #include "audio_out.h" #include "audio_out_internal.h" #include "afmt.h" #include "../config.h" #include "../mp_msg.h" //#include "bio2jack.h" static int driver = 0; long latency = 0; long approx_bytes_in_jackd = 0; //bio2jack stuff: #define ERR_SUCCESS 0 #define ERR_OPENING_JACK 1 #define ERR_RATE_MISMATCH 2 #define ERR_BYTES_PER_FRAME_INVALID 3 enum status_enum { PLAYING, PAUSED, STOPPED, CLOSED, RESET }; void JACK_Init(void); int JACK_Open(int* deviceID, unsigned int bits_per_sample, unsigned long *rate, int channels); int JACK_Close(int deviceID); /* return 0 for success */ void JACK_Reset(int deviceID); /* free all buffered data and reset several values in the device */ long JACK_Write(int deviceID, char *data, unsigned long bytes); /* returns the number of bytes written */ long JACK_GetJackLatency(int deviceID); /* return the latency in milliseconds of jack */ int JACK_SetState(int deviceID, enum status_enum state); /* playing, paused, stopped */ int JACK_SetAllVolume(int deviceID, unsigned int volume); int JACK_SetVolumeForChannel(int deviceID, unsigned int channel, unsigned int volume); void JACK_GetVolumeForChannel(int deviceID, unsigned int channel, unsigned int *volume); // static ao_info_t info = { "JACK audio output", "jack", "Kamil Strzelecki <esack@browarek.net>", "" }; LIBAO_EXTERN(jack) static int control(int cmd, void *arg) { switch(cmd) { case AOCONTROL_GET_VOLUME: { ao_control_vol_t *vol = (ao_control_vol_t *)arg; unsigned int l, r; JACK_GetVolumeForChannel(driver, 0, &l); JACK_GetVolumeForChannel(driver, 1, &r); vol->left = (float )l; vol->right = (float )r; return CONTROL_OK; } case AOCONTROL_SET_VOLUME: { ao_control_vol_t *vol = (ao_control_vol_t *)arg; unsigned int l = (int )vol->left, r = (int )vol->right, avg_vol = (l + r) / 2, err = 0; switch (ao_data.channels) { case 6: if((err = JACK_SetVolumeForChannel(driver, 5, avg_vol))) { mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] Setting lfe volume failed, error %d\n",err); return CONTROL_ERROR; } case 5: if((err = JACK_SetVolumeForChannel(driver, 4, avg_vol))) { mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] Setting center volume failed, error %d\n",err); return CONTROL_ERROR; } case 4: if((err = JACK_SetVolumeForChannel(driver, 3, r))) { mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] Setting rear right volume failed, error %d\n",err); return CONTROL_ERROR; } case 3: if((err = JACK_SetVolumeForChannel(driver, 2, l))) { mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] Setting rear left volume failed, error %d\n",err); return CONTROL_ERROR; } case 2: if((err = JACK_SetVolumeForChannel(driver, 1, r))) { mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] Setting right volume failed, error %d\n",err); return CONTROL_ERROR; } case 1: if((err = JACK_SetVolumeForChannel(driver, 0, l))) { mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] Setting left volume failed, error %d\n",err); return CONTROL_ERROR; } } return CONTROL_OK; } } return(CONTROL_UNKNOWN); } static int init(int rate_hz, int channels, int format, int flags) { int err, m, frag_spec; unsigned long rate; unsigned int bits_per_sample; unsigned long jack_port_flags=JackPortIsPhysical; unsigned int jack_port_name_count=0; const char *jack_port_name=NULL; mp_msg(MSGT_AO, MSGL_INFO, "AO: [Jack] Initialising library.\n"); JACK_Init(); if (ao_subdevice) { jack_port_flags = 0; jack_port_name_count = 1; jack_port_name = ao_subdevice; mp_msg(MSGT_AO, MSGL_INFO, "AO: [Jack] Trying to use jack device:%s.\n", ao_subdevice); } switch (format) { case AFMT_U8: case AFMT_S8: format = AFMT_U8; bits_per_sample = 8; m = 1; break; default: format = AFMT_S16_LE; bits_per_sample = 16; m = 2; break; } rate = rate_hz; err = JACK_OpenEx(&driver, bits_per_sample, &rate, channels, channels, &jack_port_name, jack_port_name_count, jack_port_flags); /* if sample rates doesn't match try to open device with jack's rate and * let mplayer convert it (rate now contains that which jackd use) */ if(err == ERR_RATE_MISMATCH) { mp_msg(MSGT_AO, MSGL_INFO, "AO: [Jack] Sample rate mismatch, trying to resample.\n"); err = JACK_OpenEx(&driver, bits_per_sample, &rate, channels, channels, &jack_port_name, jack_port_name_count, jack_port_flags); } /* any other error */ if(err != ERR_SUCCESS) { mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] JACK_Open() failed, error %d\n", err); return 0; } err = JACK_SetAllVolume(driver, 100); if(err != ERR_SUCCESS) { // This is not fatal, but would be peculiar... mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] JACK_SetAllVolume() failed, error %d\n", err); } latency = JACK_GetJackLatency(driver); ao_data.format = format; ao_data.channels = channels; ao_data.samplerate = rate; ao_data.bps = ( rate * channels * m ); // Rather rough way to find out the rough number of bytes buffered approx_bytes_in_jackd = JACK_GetJackBufferedBytes(driver) * 2; mp_msg(MSGT_AO, MSGL_INFO, "AO: [Jack] OK. I'm ready to go (%d Hz/%d channels/%d bit)\n", ao_data.samplerate, ao_data.channels, bits_per_sample); return 1; } static void uninit(int immed) { int errval = 0; if((errval = JACK_Close(driver))) mp_msg(MSGT_AO, MSGL_ERR, "AO: [Jack] error closing device, error %d\n", errval); } static int play(void* data,int len,int flags) { return JACK_Write(driver, data, len); } static void audio_pause() { JACK_SetState(driver, PAUSED); } static void audio_resume() { JACK_SetState(driver, PLAYING); } static void reset() { JACK_Reset(driver); latency = JACK_GetJackLatency(driver); // Rather rough way to find out the rough number of bytes buffered approx_bytes_in_jackd = JACK_GetJackBufferedBytes(driver) * 2; } static int get_space() { return JACK_GetBytesFreeSpace(driver); } static float get_delay() { float ret = 0; ret = (JACK_GetBytesStored(driver) + approx_bytes_in_jackd + latency) / (float)ao_data.bps; return ret; }