view TOOLS/qepdvcd.sh @ 23510:a6c619ee9d30

Teletext support for tv:// (v4l and v4l2 only) modified patch from Otvos Attila oattila at chello dot hu Module uses zvbi library for all low-level VBI operations (like I/O with vbi device, converting vbi pages into usefull vbi_page stuctures, rendering them into RGB32 images). All teletext related stuff (except properties, slave commands and rendering osd in text mode or RGB32 rendered teletext pages in spu mode) is implemented in tvi_vbi.c New properties: teletext_page - switching between pages teletext_mode - switch between on/off/opaque/transparent modes teletext_format - (currently read-only) allows to get format info (black/white,gray,text) teletext_half_page - trivial zooming (displaying top/bottom half of teletext page) New slave commands: teletext_add_dec - user interface for jumping to any page by editing page number interactively teletext_go_link - goes though links, specified on current page

#!/bin/bash
#
# QEPDVCD
#
# Most of this stuff comes straight from MPlayer documentation.
# Options are limited only to a small useful subset, if you 
# want more control, RTFM and DIY.
#
# Version:          0.1
#
# Licence:          GPL
#
# Author:           Reynaldo H. Verdejo Pinochet <[e-mail]> 
#
# Script:           MPlayer Sources. Anything supported to vcd/svcd pal/ntsc 
#
# requires:         mencoder
#
# sugests:          vcdimager / cdrecord 
#
# Thanks to:        Carlos Navarro Salas - name author ;)
#					
#

# Defaults

MYNAME=`basename $0`
TARGET="svcd"
ENCQ="2"
ABPS="224"
VBPS="2000"
NORM="NTSC"
SPLIT="0"
TOLERANCE="85"
OUTNAME="mencodedvcd"
SUBFILENAME=0

EDLFILENAME="pass.edl"
HAVESUB=0
WORKDIR="."
RATIOX=4
RATIOY=3

OPTIONS="INPUTFILENAME TARGET ENCQ ABPS VBPS NORM SPLIT TOLERANCE OUTNAME"

function usage()
{
echo ""
echo "usage $MYNAME inputfile [options]"
echo ""
echo "Options: [Default value]"
echo ""
echo "-t	Target svcd|vcd [svcd]"
echo "-q	Encoding quality 0|1|2 [2]"
echo "-a	Audio bitrate in kbps [224]"
echo "-v	Video bitrate in kbps [2000 For SVCD, 1150 For VCD]"
echo "-n	Norm NTSC|PAL [NTSC]"
echo "-d	Divide/split movie at given times time1:time2:... [no split]"
echo "-s	Shitty TV screen tolerance %, afects subtitle positioning [85]"
echo "-u	Subtitle file name [No subtitle]"
echo "-o	Output basename [mencodedvcd]"
echo ""
echo "In case you want to use -a/-v please read:"
echo "http://www.mplayerhq.hu/DOCS/HTML/en/menc-feat-vcd-dvd.html"
echo ""
}

function test_needed()
{

for i in mencoder; do
	if [ -z "`which $i`" ]; then
		echo "[ERROR] mencoder not found in $PATH!"
		exit 1
	fi
done

}

function test_sugested()
{

for i in vcdimager cdrecord; do
	if [ -z "`which $i`" ]; then
		echo "[WARNING] $i not found in $PATH!"
		echo "You'll likely need it after we finish."
		exit 1
	fi
done
}

test_needed
test_sugested

if [ $# -lt 1 ]; then
	echo ""
	echo "[ERROR] Input filename parameter is mandatory."
	echo ""
	usage
	exit 1
fi

case $1 in
	-*)
 		usage
		exit 1
		;;
	*)
		INPUTFILENAME=$1
		shift 1
		;;
esac

while [ "$1"x != "x" ]; do
	case $1 in
		-t)
		TARGET=$2
		shift 1
		;;
		-q)
		ENCQ=$2
		shift 1
		;;
		-a)
		ABPS=$2
		shift 1
		;;
		-v)
		VBPS=$2
		shift 1
		;;
		-n)
		NORM=$2
		shift 1
		;;
		-d)
		SPLIT=$2
		shift 1
		;;
		-s)
		TOLERANCE=$2
		shift 1
		;;
		-u)
		SUBFILENAME="$2"
		HAVESUB=1
		shift 1
		;;
		-o)
		OUTNAME=$2
		shift 1
		;;
	esac
	shift 1
done

echo ""
echo "[STATUS] Will re-encode using the following parameters:"
echo ""
for i in $OPTIONS ; do
	echo "$i ${!i}";
done

# Parameter Sanity Check ###########################################
# We need to check supplied params against known format constraints
####################################################################

if [ $TARGET = "svcd" ]; then
	if [ $ABPS -gt 384 ]; then
		echo "[ERROR] SVCD maximum abitrate is 384kbps."
		exit 1
	fi
	if [ $VBPS -gt 2600 ]; then
		echo "[ERROR] SVCD maximum vbitrate is 2600kbps."
		exit 1
	fi
else [ $TARGET = "vcd" ]
	if [ $ABPS -eq 224 ]; then
		echo "[ERROR] VCD abitrate must be 224kbps."
		exit 1
	fi
	if [ $VBPS -gt 1150 ]; then
		echo "[ERROR] VCD maximum vbitrate is 1150kbps."
		exit 1
	fi
fi

# Set encoding options ##############################################

if [ $TARGET = "svcd" ]; then
	FORMAT="xsvcd"
	VCODEC="mpeg2video"
	VRCMINRATE=4
	VRCMAXRATE=2500
	VRCBUFSIZE=917
	if [ $NORM = "NTSC" ]; then
		SCALEX=480
		SCALEY=480
		KEYINT=18
		OFPS="24000/1001"
		TELECINE=":telecine"
	else [ $NORM = "PAL" ]
		SCALEX=480
		SCALEY=576
		KEYINT=15
		OFPS=25
	fi
else [ $TARGET = "vcd" ]
	FORMAT="xvcd"
	VCODEC="mpeg1video"
	VRCMINRATE=$VBPS
	VRCMAXRATE=$VBPS
	VRCBUFSIZE=327
	if [ $NORM = "NTSC" ]; then
		SCALEX=352
		SCALEY=240
		KEYINT=18
		OFPS="24000/1001"
	else [ $NORM = "PAL" ]
		SCALEX=352
		SCALEY=288
		KEYINT=15
		OFPS=25
	fi
fi

# Start reencoding ###################################################

cd $WORKDIR

if [ $(($HAVESUB+1)) -eq 1 ]; then
	SUBTITLESTRING="/dev/null"
else
	SUBTITLESTRING="$SUBFILENAME"
fi

if [ $SPLIT == "0" ]; then
	CICLES=0
	TIMESTRING=""
else
	if [ -e $EDLFILENAME ]; then
		echo "[ERROR]"
		echo "The -d option needs to generate a temporary file called"
		echo "$EDLFILENAME. You already have one in this directory,"
		echo "please remove/rename it and run $MYNAME again."
		echo ""
		exit 1
	else
		EDLSTRING=$(echo $SPLIT | sed -e s/:/' '/g)
		EDLARRAY=($EDLSTRING)
		CICLES=$(echo $EDLSTRING | wc -w)
		TIMESTRING="-edl $EDLFILENAME -hr-edl-seek"
	fi
fi


for j in $(seq 0 $CICLES); do

	NEWNAME=$OUTNAME"_PART"$j".mpg"
	echo ""
	echo "Making $NEWNAME, wish me luck ;-)"
	echo ""

# Create EDLFILENAME #################################################

	if [ $CICLES -ge 1 ]; then
		for i in $(seq 0 $CICLES)
		do
			if [ $i -eq $j ]; then
				if [ $j -ne 0 ]; then
					echo "0 ${EDLARRAY[$(($i-1))]} 0" > $EDLFILENAME
				fi
				if [ $i -ne $CICLES ]; then
					echo "${EDLARRAY[$(($i))]} 999999 0" >> $EDLFILENAME
				fi
			fi
		done
	fi
		
# Mencoder Time ;-) ###################################################

mencoder \
-ovc lavc -oac lavc -vf expand=:::::$RATIOX/$RATIOY:1,scale=$SCALEX:$SCALEY,harddup \
-srate 44100 -af lavcresample=44100 -lavcopts acodec=mp2:abitrate=$ABPS:vcodec=$VCODEC:\
vbitrate=$VBPS:keyint=$KEYINT:mbd=$ENCQ:vrc_buf_size=$VRCBUFSIZE:vrc_maxrate=$VRCMAXRATE:\
vrc_minrate=$VRCMINRATE:vi_qfactor=0.1:vi_qoffset=1.5:aspect=$RATIOX/$RATIOY -of mpeg \
-mpegopts format=$FORMAT$TELECINE -sub $SUBTITLESTRING -subpos $TOLERANCE -subwidth \
$TOLERANCE -ofps $OFPS $TIMESTRING -o $NEWNAME $INPUTFILENAME

echo "Encoding of $NEWNAME finished."
echo "Run vcdimager -t svcd/vcd $NEWNAME and burn with cdrecord."

done

echo "$(($CICLES+1)) VCD/SVCD file(s) created!!!"
echo "Happy to be of some help ;-) have fun."
exit 0