view libmpcodecs/ad_libmad.c @ 23510:a6c619ee9d30

Teletext support for tv:// (v4l and v4l2 only) modified patch from Otvos Attila oattila at chello dot hu Module uses zvbi library for all low-level VBI operations (like I/O with vbi device, converting vbi pages into usefull vbi_page stuctures, rendering them into RGB32 images). All teletext related stuff (except properties, slave commands and rendering osd in text mode or RGB32 rendered teletext pages in spu mode) is implemented in tvi_vbi.c New properties: teletext_page - switching between pages teletext_mode - switch between on/off/opaque/transparent modes teletext_format - (currently read-only) allows to get format info (black/white,gray,text) teletext_half_page - trivial zooming (displaying top/bottom half of teletext page) New slave commands: teletext_add_dec - user interface for jumping to any page by editing page number interactively teletext_go_link - goes though links, specified on current page

// SAMPLE audio decoder - you can use this file as template when creating new codec!

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#include "config.h"

#include "ad_internal.h"

static ad_info_t info =  {
	"libmad mpeg audio decoder",
	"libmad",
	"A'rpi",
	"libmad...",
	"based on Xine's libmad/xine_decoder.c"
};

LIBAD_EXTERN(libmad)

#include <mad.h>

typedef struct mad_decoder_s {

  struct mad_synth  synth; 
  struct mad_stream stream;
  struct mad_frame  frame;
  
  int have_frame;

  int               output_sampling_rate;
  int               output_open;
  int               output_mode;

} mad_decoder_t;

static int preinit(sh_audio_t *sh){

  mad_decoder_t *this = (mad_decoder_t *) malloc(sizeof(mad_decoder_t));
  memset(this,0,sizeof(mad_decoder_t));
  sh->context = this;
  
  mad_synth_init  (&this->synth);
  mad_stream_init (&this->stream);
  mad_frame_init  (&this->frame);
  
  sh->audio_out_minsize=2*4608;
  sh->audio_in_minsize=4096;
  
  return 1;
}

static int read_frame(sh_audio_t *sh){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;
  int len;

while((len=demux_read_data(sh->ds,&sh->a_in_buffer[sh->a_in_buffer_len],
          sh->a_in_buffer_size-sh->a_in_buffer_len))>0){
  sh->a_in_buffer_len+=len;
  while(1){
    int ret;
    mad_stream_buffer (&this->stream, sh->a_in_buffer, sh->a_in_buffer_len);
    ret=mad_frame_decode (&this->frame, &this->stream);
    if (this->stream.next_frame) {
	int num_bytes =
	    (char*)sh->a_in_buffer+sh->a_in_buffer_len - (char*)this->stream.next_frame;
	memmove(sh->a_in_buffer, this->stream.next_frame, num_bytes);
	mp_msg(MSGT_DECAUDIO,MSGL_DBG2,"libmad: %d bytes processed\n",sh->a_in_buffer_len-num_bytes);
	sh->a_in_buffer_len = num_bytes;
    }
    if (ret == 0) return 1; // OK!!!
    // error! try to resync!
    if(this->stream.error==MAD_ERROR_BUFLEN) break;
  }
}
mp_msg(MSGT_DECAUDIO,MSGL_INFO,"Cannot sync MAD frame\n");
return 0;
}

static int init(sh_audio_t *sh){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;

  this->have_frame=read_frame(sh);
  if(!this->have_frame) return 0; // failed to sync...
  
  sh->channels=(this->frame.header.mode == MAD_MODE_SINGLE_CHANNEL) ? 1 : 2;
  sh->samplerate=this->frame.header.samplerate;
  sh->i_bps=this->frame.header.bitrate/8;
  sh->samplesize=2;
  
  return 1;
}

static void uninit(sh_audio_t *sh){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;
  mad_synth_finish (&this->synth);
  mad_frame_finish (&this->frame);
  mad_stream_finish(&this->stream);
  free(sh->context);
}

/* utility to scale and round samples to 16 bits */
static inline signed int scale(mad_fixed_t sample) {
  /* round */
  sample += (1L << (MAD_F_FRACBITS - 16));

  /* clip */
  if (sample >= MAD_F_ONE)
    sample = MAD_F_ONE - 1;
  else if (sample < -MAD_F_ONE)
    sample = -MAD_F_ONE;

  /* quantize */
  return sample >> (MAD_F_FRACBITS + 1 - 16);
}

static int decode_audio(sh_audio_t *sh,unsigned char *buf,int minlen,int maxlen){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;
  int len=0;

  while(len<minlen && len+4608<=maxlen){
    if(!this->have_frame) this->have_frame=read_frame(sh);
    if(!this->have_frame) break; // failed to sync... or EOF
    this->have_frame=0;

    mad_synth_frame (&this->synth, &this->frame);

	{ unsigned int         nchannels, nsamples;
	  mad_fixed_t const   *left_ch, *right_ch;
	  struct mad_pcm      *pcm = &this->synth.pcm;
	  uint16_t            *output = (uint16_t*) buf;

	  nchannels = pcm->channels;
	  nsamples  = pcm->length;
	  left_ch   = pcm->samples[0];
	  right_ch  = pcm->samples[1];

	  len+=2*nchannels*nsamples;
	  buf+=2*nchannels*nsamples;
	  
	  while (nsamples--) {
	    /* output sample(s) in 16-bit signed little-endian PCM */
	    
	    *output++ = scale(*left_ch++);
	    
	    if (nchannels == 2) 
	      *output++ = scale(*right_ch++);

	  }
	}
  }
  
  return len?len:-1;
}

static int control(sh_audio_t *sh,int cmd,void* arg, ...){
  mad_decoder_t *this = (mad_decoder_t *) sh->context;
    // various optional functions you MAY implement:
    switch(cmd){
      case ADCTRL_RESYNC_STREAM:
	this->have_frame=0;
	mad_synth_init  (&this->synth);
	mad_stream_init (&this->stream);
	mad_frame_init  (&this->frame);
	return CONTROL_TRUE;
      case ADCTRL_SKIP_FRAME:
        this->have_frame=read_frame(sh);
	return CONTROL_TRUE;
    }
  return CONTROL_UNKNOWN;
}