view sub_cc.c @ 23510:a6c619ee9d30

Teletext support for tv:// (v4l and v4l2 only) modified patch from Otvos Attila oattila at chello dot hu Module uses zvbi library for all low-level VBI operations (like I/O with vbi device, converting vbi pages into usefull vbi_page stuctures, rendering them into RGB32 images). All teletext related stuff (except properties, slave commands and rendering osd in text mode or RGB32 rendered teletext pages in spu mode) is implemented in tvi_vbi.c New properties: teletext_page - switching between pages teletext_mode - switch between on/off/opaque/transparent modes teletext_format - (currently read-only) allows to get format info (black/white,gray,text) teletext_half_page - trivial zooming (displaying top/bottom half of teletext page) New slave commands: teletext_add_dec - user interface for jumping to any page by editing page number interactively teletext_go_link - goes though links, specified on current page

/*
 * sub_cc.c - Decoder for Closed Captions
 *
 * This decoder relies on MPlayer's OSD to display subtitles.
 * Be warned that the decoding is somewhat preliminary, though it basically works.
 * 
 * Most notably, only the text information is decoded as of now, discarding color,
 * background and position info (see source below).
 * 
 * by Matteo Giani
 *
 * uses source from the xine closed captions decoder
 */


#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "config.h"
#include "sub_cc.h"

#include "subreader.h"

#include "libvo/video_out.h"
#include "libvo/sub.h"


#define CC_MAX_LINE_LENGTH 64

static char chartbl[128];

static subtitle buf1,buf2;
static subtitle *fb,*bb;

static unsigned int cursor_pos=0;

static int inited=0;

static void build_char_table(void)
{
  int i;
  /* first the normal ASCII codes */
  for (i = 0; i < 128; i++)
    chartbl[i] = (char) i;
  /* now the special codes */
  chartbl[0x2a] = 'á';
  chartbl[0x5c] = 'é';
  chartbl[0x5e] = 'í';
  chartbl[0x5f] = 'ó';
  chartbl[0x60] = 'ú';
  chartbl[0x7b] = 'ç';
  chartbl[0x7c] = '÷';
  chartbl[0x7d] = 'Ñ';
  chartbl[0x7e] = 'ñ';
  chartbl[0x7f] = '¤';    /* FIXME: this should be a solid block */
}

static void clear_buffer(subtitle *buf)
{
	int i;
	buf->lines=0;
	for(i=0;i<SUB_MAX_TEXT;i++) if(buf->text[i]) {free(buf->text[i]);buf->text[i]=NULL;}
}


void subcc_init(void)
{
	int i;
	//printf("subcc_init(): initing...\n");
	build_char_table();
	for(i=0;i<SUB_MAX_TEXT;i++) {buf1.text[i]=buf2.text[i]=NULL;}
	buf1.lines=buf2.lines=0;
	fb=&buf1;
	bb=&buf2;
	
	inited=1;
}

static void append_char(char c)
{
	if(!bb->lines) {bb->lines++; cursor_pos=0;}
	if(bb->text[bb->lines - 1]==NULL) 
	{
		bb->text[bb->lines - 1]=malloc(CC_MAX_LINE_LENGTH);
		memset(bb->text[bb->lines - 1],0,CC_MAX_LINE_LENGTH);
		cursor_pos=0;
	}
	
	if(c=='\n')
	{
		if(cursor_pos>0 && bb->lines < SUB_MAX_TEXT)
			bb->lines++;cursor_pos=0;
	}
	else 
	{
		if(cursor_pos==CC_MAX_LINE_LENGTH-1)
		{
			fprintf(stderr,"sub_cc.c: append_char() reached CC_MAX_LINE_LENGTH!\n");
			return;
		}
		bb->text[bb->lines - 1][cursor_pos++]=c;
	}
}


static void swap_buffers(void)
{
	subtitle *foo;
	foo=fb;
	fb=bb;
	bb=foo;
}

static void display_buffer(subtitle * buf)
{
	vo_sub=buf;
	vo_osd_changed(OSDTYPE_SUBTITLE);
}


static void cc_decode_EIA608(unsigned short int data)
{
  
  static unsigned short int lastcode=0x0000;	
  unsigned char c1 = data & 0x7f;
  unsigned char c2 = (data >> 8) & 0x7f;

  if (c1 & 0x60) {		/* normal character, 0x20 <= c1 <= 0x7f */
	   append_char(chartbl[c1]);
	   if(c2 & 0x60)	/*c2 might not be a normal char even if c1 is*/
		   append_char(chartbl[c2]);
  }
  else if (c1 & 0x10)		// control code / special char
  {
//	  int channel= (c1 & 0x08) >> 3;
	  c1&=~0x08;
	  if(data!=lastcode)
	  {
	  	if(c2 & 0x40) {	/*PAC, Preamble Address Code */
			append_char('\n'); /*FIXME properly interpret PACs*/
		}
		else
			switch(c1)
			{
				case 0x10:	break; // ext attribute
				case 0x11: 
					if((c2 & 0x30)==0x30) 
					{
						//printf("[debug]:Special char (ignored)\n");
						/*cc_decode_special_char()*/;
					}
					else if (c2 & 0x20) 
					{
						//printf("[debug]: midrow_attr (ignored)\n");
						/*cc_decode_midrow_attr()*/;
					}
					break;
				case 0x14:
					switch(c2)
					{
						case 0x2C: display_buffer(NULL); //EDM
							   clear_buffer(fb); break;
						case 0x2d: append_char('\n');	//carriage return
							   break;
						case 0x2e: clear_buffer(bb);	//ENM
							   break;
						case 0x2f: swap_buffers();	//Swap buffers
							   display_buffer(fb);
							   clear_buffer(bb);
							   break;
					}
					break;
				case 0x17:
					if( c2>=0x21 && c2<=0x23) //TAB
					{
						break;
					}
			}
	  }
  } 
  lastcode=data;  
}

static void subcc_decode(unsigned char *inputbuffer, unsigned int inputlength)
{
  /* The first number may denote a channel number. I don't have the
   * EIA-708 standard, so it is hard to say.
   * From what I could figure out so far, the general format seems to be:
   *
   * repeat
   *
   *   0xfe starts 2 byte sequence of unknown purpose. It might denote
   *        field #2 in line 21 of the VBI. We'll ignore it for the
   *        time being.
   *
   *   0xff starts 2 byte EIA-608 sequence, field #1 in line 21 of the VBI.
   *        Followed by a 3-code triplet that starts either with 0xff or
   *        0xfe. In either case, the following triplet needs to be ignored
   *        for line 21, field 1.
   *
   *   0x00 is padding, followed by 2 more 0x00.
   *
   *   0x01 always seems to appear at the beginning, always seems to
   *        be followed by 0xf8, 8-bit number. 
   *        The lower 7 bits of this 8-bit number seem to denote the
   *        number of code triplets that follow.
   *        The most significant bit denotes whether the Line 21 field 1 
   *        captioning information is at odd or even triplet offsets from this
   *        beginning triplet. 1 denotes odd offsets, 0 denotes even offsets.
   *      
   *        Most captions are encoded with odd offsets, so this is what we
   *        will assume.
   *
   * until end of packet
   */
  unsigned char *current = inputbuffer;
  unsigned int curbytes = 0;
  unsigned char data1, data2;
  unsigned char cc_code;
  int odd_offset = 1;

  while (curbytes < inputlength) {
    int skip = 2;

    cc_code = *(current);

    if (inputlength - curbytes < 2) {
#ifdef LOG_DEBUG
      fprintf(stderr, "Not enough data for 2-byte CC encoding\n");
#endif
      break;
    }
    
    data1 = *(current+1);
    data2 = *(current + 2);
    current++; curbytes++;
    
    switch (cc_code) {
    case 0xfe:
      /* expect 2 byte encoding (perhaps CC3, CC4?) */
      /* ignore for time being */
      skip = 2;
      break;
      
    case 0xff:
      /* expect EIA-608 CC1/CC2 encoding */
      // FIXME check parity!
      // Parity check omitted assuming we are reading from a DVD and therefore
      // we should encounter no "transmission errors".
      cc_decode_EIA608(data1 | (data2 << 8));
      skip = 5;
      break;
      
    case 0x00:
      /* This seems to be just padding */
      skip = 2;
      break;
      
    case 0x01:
      odd_offset = data2 & 0x80;
      if (odd_offset)
	skip = 2;
      else
	skip = 5;
      break;
      
    default:
//#ifdef LOG_DEBUG
      fprintf(stderr, "Unknown CC encoding: %x\n", cc_code);
//#endif
      skip = 2;
      break;
    }
    current += skip;
    curbytes += skip;
  }
}


void subcc_process_data(unsigned char *inputdata,unsigned int len)
{
	if(!subcc_enabled) return;
	if(!inited) subcc_init();
	
	subcc_decode(inputdata, len);
}