Mercurial > mplayer.hg
view configure @ 956:a6cecd9a1bad
'-ao' switch (including '-ao help'), fixing Arpi's bug (short name 'null' for both of oss and null driver ;)
| author | lgb |
|---|---|
| date | Sun, 03 Jun 2001 00:24:49 +0000 |
| parents | 76fd9463b9d3 |
| children | 162a78d3cc08 |
line wrap: on
line source
#!/bin/bash # # MPlayer configurator. (C) 2000 Pontscho/fresh!mindworkz # pontscho@makacs.poliod.hu # # Changes in reversed order: # # 2001/05/40 by LGB # - added --prefix support # # 2001/05/22 by Nick Kurshev # - added definition of CPU clone # # 2001/04/16 by LGB # - added libcss stuffs # # 2001/04/15 by Pontscho # - added --disable-select option # - added X11DIR variable in config.mak and fix syncfb Makefile -L/usr/X11/lib bug # # 2001/03/24 by Mike Graffam: # - added autodetect code for XF86VidMode, along with explicit --enable-vm # # 2001/03/22 by Bivanbi: # - new option: --cc (to specify C compiler path+name) # # 2001/03/08 by LGB: # - DGA detect-o-matic :) # - '--disable-dga' option to force disabling DGA vo driver compiling into mplayer # - line about '--enable-dga' is added to the help message # # 2001/02/26 by A'rpi: # - added DGA option: --enable-dga # - no notify if --with-win32libdir used [Tibcu] # # 2001/02/25 by LGB: # - TMPDIR or TEMPDIR variable is honored during tests for temporary files # - ChangeLog inside configure was reversed ;-) # # some changes by A'rpi/ESP-team: # - added 'athlon' target for the new athlongcc [Ian Kumlien] # - applied _win32libdir=-L patch by Magnus Pfeffer # # some changes by LGB: # - Ehhh, AMD K6-2 returns with cpuid 5 ;-) Changing back Arpi's last change :) # More info: AMD K6-2 reports with family 5, duron with 6, so I attached # much finer CPU type detection based on Linux kernel's one :) # (k5: 5, model<6, k6: 5, model>=6, k7: 6, model=any) # - On some exit point (error) temporary files were not deleted. Fixed. # - $TMP and $TMP2 are renamed to $TMPC and $TMPO ;-) # - Some useless { ... } are removed # # some changes by A'rpi/ESP-team: # - the --with-win32libdir patch by Aaron Hope applied # - some english bugfix again :) # - cpu type selection changed: # ( k7->k6->k5-> ) || (i686->pentiumpro-> ) pentium-> i486 -> i386 -> error! # - cpu type for AMD/family=5 changed k6->k5 # # some changes by LGB (Gábor Lénárt): # - SOME gcc may support 'k7', so I added tests for ALL CPU type optimization # switches with the ability to find out the best optimization for your CPU. # - Help moved to the begining to avoid tests if user only wants help. # - A one lined help to indicate detailed help for users # - Fixed /tmp race (PIDs can be predicted, I added random numbers as well) # # some changes by A'rpi/ESP-team: # - some english bugfix :) # - removed _??exists flags, _?? is enough... # - creating only config.mak files instead of whole Makefiles # # -- # LGB: Help moved here. if [ "$1" = "--help" -o "$1" = "-help" -o "$1" = "-h" ]; then cat << EOF usage: $0 [options] params: --cc use this C compiler to build MPlayer [gcc] --prefix=DIR use this prefix for installing mplayer [/usr/local] --enable-debug[=1-3] compile debugging information into mplayer [disable] --enable-profile compile profiling information into mplayer [disable] --enable-mmx build with mmx support [autodetect] --enable-mmx2 build with mmx2 support (PIII, Athlon) [autodetect] --enable-3dnow build with 3dnow! support [autodetect] --enable-3dnowex build with 3dnow-dsp! support (K7) [autodetect] --enable-sse build with sse support [autodetect] --enable-gl build with OpenGL render support [autodetect] --enable-dga build with DGA support [autodetect] --enable-svga build with SVGAlib support [autodetect] --enable-sdl build with SDL render support [autodetect] --enable-mga build with mga_vid support [autodetect, if /dev/mga_vid is available] --enable-xmga build with mga_vid X Window support [autodetect, if both /dev/mga_vid and x11 are available] --enable-xv build with Xv render support for X 4.x [autodetect] --enable-vm build with XF86VidMode support for x11 driver --enable-x11 build with X11 render support [autodetect] --enable-fbdev build with FBDev render support [_not_ autodetected] --enable-mlib build with MLIB support ( only Solaris ) --enable-termcap use termcap database for key codes --enable-xmmp use XMMP audio drivers --enable-lirc enable LIRC (remote control) support --disable-select disable audio select() support ( for example required this option ALSA or Vortex2 driver ) --disable-dshow disable DirectShow support (if you don't have C++ compiler&libs, or you've found dshow codecs slower than old VfW ones) --disable-fastmemcpy disable 3dnow/sse/mmx optimized memcpy() --with-x11libdir=DIR X library files are in DIR --with-win32libdir=DIR windows codec files --with-csslibdir=DIR directory contains libcss.so shared library --with-cssincdir=DIR directory contains libcss header file (css.h) (--with-css* only needed, if libCSS autodetect fails) --size-x=SIZE default screen width --size-y=SIZE default screen height EOF exit 0 fi # LGB: Some inital help echo "You can get detailed help on configure with: $0 --help" echo "Please wait while ./configure discovers your software and hardware environment!" # LGB: temporary files TMPC="mplayer-conf-${RANDOM}-$$-${RANDOM}.c" TMPO="mplayer-conf-${RANDOM}-$$-${RANDOM}.o" if [ ! -z $TMPDIR ]; then TMPC="${TMPDIR}/${TMPC}" TMPO="${TMPDIR}/${TMPO}" elif [ ! -z $TEMPDIR ]; then TMPC="${TEMPDIR}/${TMPC}" TMPO="${TEMPDIR}/${TMPO}" else TMPC="/tmp/${TMPC}" TMPO="/tmp/${TMPO}" fi # --- # config files CCONF='config.h' MCONF='config.mak' # --- Check for C compiler: _cc=gcc _x11=auto _x11libdir= if [ -e /usr/X11R6 ]; then _x11libdir=-L/usr/X11R6/lib else if [ -e /usr/X11 ]; then _x11libdir=-L/usr/X11/lib fi fi for ac_option do case "$ac_option" in --cc=*) _cc=`echo $ac_option | cut -d '=' -f 2` ;; --with-x11libdir=*) _x11libdir=-L`echo $ac_option | cut -d '=' -f 2` ;; --enable-x11) _x11=yes ;; --disable-x11) _x11=no ;; esac done # --- pname=`cat /proc/cpuinfo | grep 'model name' | cut -d ':' -f 2` pparam=`cat /proc/cpuinfo | grep 'features' | cut -d ':' -f 2` if [ -z "$pparam" ]; then pparam=`cat /proc/cpuinfo | grep 'flags' | cut -d ':' -f 2` fi pvendor=`cat /proc/cpuinfo | grep 'vendor_id' | cut -d ':' -f 2 | cut -d ' ' -f 2` pfamily=`cat /proc/cpuinfo | grep 'cpu family' | cut -d ':' -f 2 | cut -d ' ' -f 2` pmodel=`cat /proc/cpuinfo |grep -v 'model name'| grep "model" | cut -d ':' -f 2 | cut -d ' ' -f 2` pstepping=`cat /proc/cpuinfo | grep 'stepping' | cut -d ':' -f 2 | cut -d ' ' -f 2` _mmx=no _mmx2=no _3dnow=no _3dnowex=no _mtrr=no _sse=no _mga=no _gl=no _sdl=no _xv=no _vm=no _xdpms=no _3dfx=no _syncfb=no _mlib=no _mpg123=no _xmga=no _dga=no _dga2=no _svga=no _fbdev=yes _lirc=no _css=no _dshow=yes _fastmemcpy=yes _x=1 _y=1 _gllib= _sdllib= _xvlib= _x11lib= _select='#define HAVE_AUDIO_SELECT' _gui=no; for i in `echo $pparam`; do case "$i" in 3dnow) _3dnow=yes _mpg123=yes ;; 3dnowext) _3dnow=yes _3dnowex=yes _mpg123=yes ;; mmx) _mmx=yes ;; mmxext) _mmx2=yes ;; mtrr) _mtrr=yes ;; k6_mtrr) _mtrr=yes ;; xmm) _sse=yes _mmx2=yes ;; sse) _sse=yes _mmx2=yes ;; kni) _sse=yes _mmx2=yes ;; esac done _win32libdirnotify=no if [ -e /usr/lib/win32 ]; then _win32libdir=/usr/lib/win32 else if [ -e /usr/local/lib/win32 ]; then _win32libdir=/usr/local/lib/win32 else # This is our default: _win32libdir=/usr/lib/win32 _win32libdirnotify=yes fi fi if [ -e /dev/mga_vid ]; then _mga=yes _syncfb=yes fi proc=pentium iproc=586 case "$pvendor" in AuthenticAMD) case "$pfamily" in 3) proc=i386 iproc=386 ;; 4) proc=i486 iproc=486 ;; 5) if [ $pmodel -ge 6 ]; then # LGB: models are: K5/SSA5 K5 K5 K5 ? ? K6 K6 K6-2 K6-3 proc=k6 else proc=k5 fi iproc=586 ;; 6|7) # LGB: Though it seems Athlon CPUs returns with "6" proc=k7 iproc=686 ;; *) proc=pentium iproc=586 ;; esac ;; GenuineIntel) case "$pfamily" in 3) proc=i386 iproc=386 ;; 4) proc=i486 iproc=486 ;; 5) proc=pentium iproc=586 ;; 6) proc=i686 iproc=686 ;; *) proc=pentium iproc=586 ;; esac ;; unknown) # added by Gabucino - upon Tibcu's request case "$pfamily" in 3) proc=i386 iproc=386 ;; 4) proc=i486 iproc=486 ;; *) proc=pentium iproc=586 ;; esac ;; *) proc=pentium iproc=586 ;; esac # --- cat > $TMPC << EOF int main( void ) { return 0; } EOF # check that gcc supports our cpu, if not, fallback to pentium # LGB: check -mcpu and -march swithing step by step with enabling # to fall back till 386. #echo -n "Checking your GCC CPU optimalization abilities: " if [ "$proc" = "k7" ]; then # echo -n "trying k7 " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=athlon fi if [ "$proc" = "athlon" ]; then # echo -n "trying athlon " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=k6 fi if [ "$proc" = "k6" ]; then # echo -n "trying k6 " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=k5 fi if [ "$proc" = "k5" ]; then # echo -n "trying k5 " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentium fi if [ "$proc" = "i686" ]; then # echo -n "trying i686 " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentiumpro fi if [ "$proc" = "pentiumpro" ]; then # echo -n "trying pentiumpro " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentium fi if [ "$proc" = "pentium" ]; then # echo -n "trying pentium " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=i486 fi if [ "$proc" = "i486" ]; then # echo -n "trying i486 " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=i386 fi if [ "$proc" = "i386" ]; then # echo -n "trying i386 " $_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=error fi if [ "$proc" = "error" ]; then echo echo "Your gcc does not support even \"i386\" for '-march' and '-mcpu'." >&2 rm -f $TMPC $TMPO exit fi #echo "DONE (${proc})." $_cc $TMPC -o $TMPO -lvgagl -lvga &> /dev/null && _svga=yes $_cc $TMPC -o $TMPO -lpthread &> /dev/null || \ { echo "Lib pthread not found."; rm -f $TMPC $TMPO ; exit 1; } # Atmosfear: added SDL versioncheck and autodetect; removed warnings. _sdl=no if $_cc $TMPC -o $TMPO -L/usr/lib/ -L/usr/local/lib/ -lSDL -lpthread &> /dev/null ; then if test `sdl-config --version | sed s/[=[:punct:]=]//g` -gt 116 ; then if test `sdl-config --version | sed s/[=[:punct:]=]//g` -lt 121 ; then _sdlbuggy='#define BUGGY_SDL' else _sdlbuggy='#undef BUGGY_SDL' fi _sdl=yes else _sdl=outdated fi fi # Atmosfear: added libcss autodetect _css=no if test -e "/usr/local/lib/libcss.so" ; then _csslibdir="/usr/local/lib/" if test -e "/usr/local/include/css.h" ; then _cssincdir="/usr/local/include" _css=yes fi else if test -e "/usr/lib/libcss.so" ; then _csslibdir="/usr/lib/" if test -e "/usr/include/css.h" ; then _cssincdir="/usr/include/" _css=yes fi fi fi _termcap=no $_cc $TMPC -o $TMPO -ltermcap &> /dev/null && _termcap=yes _png=no $_cc $TMPC -o $TMPO -lpng -lz&> /dev/null && _png=yes _binutils=no as libac3/downmix/downmix_i386.S -o $TMPO &> /dev/null && _binutils=yes # ----------- Check X11 and related libs (GL, Xxf86vm, Xv, DGA) -------------- if [ $_x11 = auto ]; then _x11=no $_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext &> /dev/null && _x11=yes fi if [ $_x11 = yes ]; then $_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lXdpms &> /dev/null && _xdpms=yes $_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lXv &> /dev/null && _xv=yes $_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lXxf86vm &> /dev/null && _vm=yes $_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lGL &> /dev/null && _gl=yes cat > $TMPC << EOF #include <GL/gl.h> int main( void ) { return 0; } EOF $_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lGL &> /dev/null || \ { _gl=no; echo "GL includes not found!";} cat > $TMPC << EOF #include <stdio.h> #include <X11/Xlib.h> #include <X11/extensions/xf86dga.h> int main (void) { return 0;} EOF $_cc $TMPC -o $TMPO -L/usr/X11R6/lib -L/usr/X11/lib -lX11 -lXext -lXxf86dga -lXxf86vm &> /dev/null && _dga=yes # Note: the -lXxf86vm library is the VideoMode extension and though it's # not needed for DGA, AFAIK every distribution packages together with DGA # stuffs named 'X extensions' or something similar. This check can be usefull # for further mplayer versions to set resolution by mplayer itself. # If you run into problems, remove '-lXxf86vm'. # Check if DGA is 2.0 or greater cat > $TMPC << EOF #include <stdio.h> #include <X11/Xlib.h> #include <X11/extensions/xf86dga.h> int main (void) { XDGAMode mode; XDGADevice device; return 0;} EOF _dga2=no $_cc $TMPC -o $TMPO -L/usr/X11R6/lib -L/usr/X11/lib -lX11 -lXext -lXxf86dga -lXxf86vm &> /dev/null && _dga2=yes fi rm -f $TMPC $TMPO # --- # check for the parameters. _prefix="/usr/local" for ac_option do case "$ac_option" in --enable-profile) _profile='-p' ;; --enable-debug) _debug='-g' ;; --enable-debug=*) _debug=`echo -n '-g'; echo $ac_option | cut -d '=' -f 2` ;; --enable-css) _css=yes ;; --enable-png) _png=yes ;; --enable-sse) _sse=yes ;; --enable-3dnow) _3dnow=yes ;; --enable-3dnowex) _3dnow=yes _3dnowex=yes ;; --enable-mmx) _mmx=yes ;; --enable-mmx2) _mmx2=yes ;; --enable-mtrr) _mtrr=yes ;; --enable-gl) _gl=yes ;; --enable-sdl) _sdl=yes ;; --enable-mga) _mga=yes ;; --enable-xmga) _xmga=yes ;; --enable-svga) _svga=yes ;; --enable-dga) _dga=yes ;; --enable-dga2) _dga2=yes ;; --enable-xv) _xv=yes ;; --enable-vm) _vm=yes ;; --enable-3dfx) _3dfx=yes ;; --enable-syncfb) _syncfb=yes ;; --enable-fbdev) _fbdev=yes ;; --enable-mlib) _mlib=yes ;; --enable-termcap) _termcap=yes ;; --enable-xmmp) _xmmp=yes ;; --enable-lirc) _lirc=yes ;; --enable-select) _select='#define HAVE_AUDIO_SELECT' ;; --enable-gui) _gui=yes ;; --disable-css) _css=no ;; --disable-png) _png=no ;; --disable-sse) _sse=no ;; --disable-3dnow) _3dnow=no _3dnowex=no ;; --disable-3dnowex) _3dnowex=no ;; --disable-mmx) _mmx=no _mmx2=no ;; --disable-mmx2) _mmx2=no ;; --disable-mtrr) _mtrr=no ;; --disable-gl) _gl=no ;; --disable-sdl) _sdl=no ;; --disable-mga) _mga=no ;; --disable-xmga) _xmga=no ;; --disable-xv) _xv=no ;; --disable-vm) _vm=no ;; --disable-mlib) _mlib=no ;; --disable-svga) _svga=no ;; --disable-dga) _dga=no ;; --disable-dga2) _dga2=no ;; --disable-fbdev) _fbdev=no ;; --disable-termcap) _termcap=no ;; --disable-select) _select='#undef HAVE_AUDIO_SELECT' ;; --disable-dshow) _dshow=no ;; --disable-fastmemcpy) _fastmemcpy=no ;; --disable-gui) _gui=no ;; --with-win32libdir=*) _win32libdir=`echo $ac_option | cut -d '=' -f 2` _win32libdirnotify=no ;; --with-csslibdir=*) _csslibdir=`echo $ac_option | cut -d '=' -f 2` _css='yes'; ;; --with-cssincdir=*) _cssincdir=`echo $ac_option | cut -d '=' -f 2` _css='yes'; ;; --size-x=*) _x=`echo $ac_option | cut -d '=' -f 2` ;; --size-y=*) _y=`echo $ac_option | cut -d '=' -f 2` ;; --with-x11libdir=*) ;; --prefix=*) _prefix=`echo $ac_option | cut -d '=' -f 2` ;; --cc=*) ;; esac done if [ $_x11 = 'yes' ]; then if [ $_mga = 'yes' ]; then _xmga=yes fi fi # to screen. echo -n "Kernel: " uname -a echo "Using C compiler: $_cc" echo "Install prefix: $_prefix" $_cc -v as --version | head -n 1 echo "Checking for cpu vendor ... $pvendor ( $pfamily:$pmodel:$pstepping )" echo "Checking for cpu type ... $pname" echo "Optimizing to ... $proc" echo "Checking for mmx support ... $_mmx" echo "Checking for mmx2 support ... $_mmx2" echo "Checking for 3dnow support ... $_3dnow" echo "Checking for 3dnowex support ... $_3dnowex" echo "Checking for sse support ... $_sse" echo "Checking for mtrr support ... $_mtrr" echo "Screen size ... ${_x}x${_y}" echo "Checking for X11 libs ... $_x11libdir" echo "Checking mga_vid device ... $_mga" echo "Checking for xmga ... $_xmga" echo "Checking for SDL ... $_sdl" echo "Checking for OpenGL ... $_gl" echo "Checking for Xv ... $_xv" echo "Checking for X11 ... $_x11" echo "Checking for DGA ... $_dga" echo "Checking for DGA 2.0 .. $_dga2" echo "Checking for Xf86VM ... $_vm" echo "Checking for SVGAlib ... $_svga" echo "Checking for FBDev ... $_fbdev" echo "Checking for DeCSS support ... $_css" echo "Checking for PNG support ... $_png" echo "Checking for DirectShow ... $_dshow" echo "Checking for fastmemcpy ... $_fastmemcpy" # write conf files. if [ $_gl = yes ]; then _gllib='-lGL' fi if [ $_css = yes ]; then if [ ! -z $_csslibdir ]; then _csslib="-L${_csslibdir} -lcss" else _csslib='-lcss' fi _css='#define HAVE_LIBCSS' if [ ! -z $_cssincdir ]; then _cssinc="-I${_cssincdir}" else _cssinc="" fi else _css='#undef HAVE_LIBCSS' _csslib='' _cssinc='' fi if [ $_dshow = yes ]; then _dshowlib='-Lloader/DirectShow -lDS_Filter -lstdc++' _dshowdep='loader/DirectShow/libDS_Filter.a' _dshow='#define USE_DIRECTSHOW' else _dshowlib='' _dshowdep='' _dshow='#undef USE_DIRECTSHOW' fi if [ $_fastmemcpy = yes ]; then _fastmemcpy='#define USE_FASTMEMCPY' else _fastmemcpy='#undef USE_FASTMEMCPY' fi if [ $_x11 = yes ]; then if [ $_xdpms = yes ]; then _x11lib='-lX11 -lXext -lXdpms' else _x11lib='-lX11 -lXext' fi fi if [ $_xv = yes ]; then _xvlib='-lXv' fi if [ $_sdl = yes ]; then _sdllib='-lSDL -lpthread' fi if [ $_dga = yes ]; then _dgalib='-lXxf86dga' fi if [ $_svga = yes ]; then _svgalib='-lvgagl -lvga' fi if [ $_vm = yes ]; then _vmlib='-lXxf86vm' fi if [ "$_termcap" = "yes" ]; then _termcap='#define USE_TERMCAP' _libtermcap='-ltermcap' else _termcap='#undef USE_TERMCAP' _libtermcap='' fi if [ "$_xmmp" = "yes" ]; then _xmmpaudio='#define USE_XMMP_AUDIO' _xmmplibs='-Llibxmm -lxmm' else _xmmpaudio='#undef USE_XMMP_AUDIO' fi if [ "$_lirc" = "yes" ]; then _lircdefs='#define HAVE_LIRC' _lirclibs='-llirc_client' else _lircdefs='#undef HAVE_LIRC' _lirclibs='' fi if [ $_png = yes ]; then _libpng='-lpng -lz' fi # Checking for CFLAGS if [ "$_profile" != "" ] || [ "$_debug" != "" ]; then CFLAGS="-O2 -march=$proc -mcpu=$proc $_debug $_profile" else if test -z "$CFLAGS"; then CFLAGS="-O4 -march=$proc -mcpu=$proc -pipe -ffast-math -fomit-frame-pointer" fi fi echo echo "Creating $MCONF" cat > $MCONF << EOF # -------- Generated by ./configure ----------- AR=ar CC=$_cc X11DIR=$_x11libdir # OPTFLAGS=-O4 $_profile $_debug -march=$proc -mcpu=$proc -pipe -fomit-frame-pointer -ffast-math OPTFLAGS=$CFLAGS # LIBS=-L/usr/lib -L/usr/local/lib $_x11libdir $_gllib $_sdllib $_dgalib $_x11lib $_xvlib X_LIBS=$_x11libdir $_gllib $_sdllib $_dgalib $_x11lib $_xvlib $_vmlib $_svgalib $_libpng TERMCAP_LIB=$_libtermcap XMM_LIBS = $_xmmplibs LIRC_LIBS = $_lirclibs CSS_LIB = $_csslib CSS_INC = $_cssinc WIN32_PATH=-DWIN32_PATH=\"$_win32libdir\" DS_DEP = $_dshowdep DS_LIB = $_dshowlib prefix = $_prefix EOF # echo 'CFLAGS=$(OPTFLAGS) -Wall -DMPG12PLAY' >> config.mak echo "Creating $CCONF" if [ "$_mmx" = "yes" ]; then _mmx='#define HAVE_MMX' else _mmx='#undef HAVE_MMX' fi if [ "$_mmx2" = "yes" ]; then _mmx2='#define HAVE_MMX2' else _mmx2='#undef HAVE_MMX2' fi if [ $_3dnow = yes ]; then _3dnowm='#define HAVE_3DNOW' else _3dnowm='#undef HAVE_3DNOW' fi if [ $_3dnowex = yes ]; then _3dnowexm='#define HAVE_3DNOWEX' else _3dnowexm='#undef HAVE_3DNOWEX' fi if [ $_sse = yes ]; then _ssem='#define HAVE_SSE' else _ssem='#undef HAVE_SSE' fi # --- _vosrc='' if [ $_png = yes ]; then _png='#define HAVE_PNG' _vosrc=$_vosrc' vo_png.c' else _png='#undef HAVE_PNG' fi if [ $_mlib = yes ]; then _mlib='#define HAVE_MLIB' _vosrc=$_vosrc' yuv2rgb_mlib.c' else _mlib='#undef HAVE_MLIB' fi # --- if [ $_gl = yes ]; then _gl='#define HAVE_GL' _vosrc=$_vosrc' vo_gl.c' else _gl='#undef HAVE_GL' fi if [ $_sdl = yes ]; then _sdldef='#define HAVE_SDL' _vosrc=$_vosrc' vo_sdl.c' else _sdldef='#undef HAVE_SDL' fi if [ $_x11 = yes ]; then _x11='#define HAVE_X11' _vosrc=$_vosrc' vo_x11.c' else _x11='#undef HAVE_X11' fi if [ $_xv = yes ]; then _xv='#define HAVE_XV' _vosrc=$_vosrc' vo_xv.c' else _xv='#undef HAVE_XV' fi if [ $_vm = yes ]; then _vm='#define HAVE_XF86VM' else _vm='#undef HAVE_XF86VM' fi # --- if [ $_mga = yes ]; then _mga='#define HAVE_MGA' _vosrc=$_vosrc' vo_mga.c' else _mga='#undef HAVE_MGA' fi if [ $_xmga = yes ]; then _vosrc=$_vosrc' vo_xmga.c' fi if [ $_syncfb = yes ]; then _syncfb='#define HAVE_SYNCFB' _vosrc=$_vosrc' vo_syncfb.c' else _syncfb='#undef HAVE_SYNCFB' fi if [ $_3dfx = yes ]; then _3dfx='#define HAVE_3DFX' _vosrc=$_vosrc' vo_3dfx.c' else _3dfx='#undef HAVE_3DFX' fi if [ $_svga = yes ]; then _svga='#define HAVE_SVGALIB' _vosrc=$_vosrc' vo_svga.c' else _svga='#undef HAVE_SVGALIB' fi if [ $_dga = yes ]; then _dga='#define HAVE_DGA' _vosrc=$_vosrc' vo_dga.c vo_fsdga.c' else _dga='#undef HAVE_DGA' fi if [ $_dga2 = yes ]; then _dga2='#define HAVE_DGA2' _vosrc=$_vosrc' vo_dga.c vo_fsdga.c' else _dga2='#undef HAVE_DGA2' fi if [ $_fbdev = yes ]; then _fbdev='#define HAVE_FBDEV' _vosrc=$_vosrc' vo_fbdev.c' else _fbdev='#undef HAVE_FBDEV' fi if [ $_mpg123 = yes ]; then _mpg123='#define DEFAULT_MPG123' else _mpg123='#undef DEFAULT_MPG123' fi if [ $_gui = yes ]; then _gui='#define HAVE_GUI' else _gui='#undef HAVE_GUI' fi cat > $CCONF << EOF /* -------- Generated by ./configure ----------- */ /* Define this to enable avg. byte/sec-based AVI sync method by default: (use -bps or -nobps commandline option for run-time method selection) */ #undef AVI_SYNC_BPS /* Undefine this if you want soundcard-only timing by default: You can still change this with the -alsa or -noalsa command-line option! (This function was originally impemented to solve ALSA driver's big buffer problems, but it seems to be useful for every soundcard drivers) */ #define ALSA_TIMER /* Undefine this if you don't want to select mono audio (left or right) with a stereo MPEG layer 2/3 audio stream. The command-line option -stereo has three possible values (0 for stereo, 1 for left-only, 2 for right-only), with 0 being the default. */ #define USE_FAKE_MONO /* Undefine this if your soundcard driver has no working select(). If you have kernel Oops, player hangups, or just no audio, you should try to recompile MPlayer with this option disabled! */ $_select /* You have a choice for MP3 decoding: mp3lib(mpg123) or Win32(l3codeca.acm) #define this if you prefer mpg123 (with 3Dnow! support) than l3codeca.acm (with mmx/sse optimizations) You can still change it runtime using -afm 1 (mpg123) or -afm 4 (l3codeca)*/ $_mpg123 /* XMMP support: (test code) */ $_xmmpaudio #define LIBDIR "/usr/local/lib" #define PLUGINDIR LIBDIR "/xmmp/Plugins" #define XMMP_AUDIO_DRIVER PLUGINDIR "/Sound/oss.so" /* set up max. outburst. use 65536 for ALSA 0.5, for others 16384 is enough */ #define MAX_OUTBURST 65536 /* set up audio OUTBURST. Do not change this! */ #ifdef USE_XMMP_AUDIO #define OUTBURST 4096 #else //#define OUTBURST 1024 #define OUTBURST 512 #endif /* LIRC (remote control, see www.lirc.org) support: */ $_lircdefs /* DeCSS support using libcss */ $_css /* Define this to enable MPEG 1/2 image postprocessing (requires FAST cpu!) */ #define MPEG12_POSTPROC /* DirectShow support */ $_dshow /* Use 3dnow/mmxext/sse/mmx optimized fast memcpy() [maybe buggy... signal 4]*/ $_fastmemcpy /* gui support, please do not edit this option */ $_gui /* Enable fast OSD/SUB renderer (looks ugly, but uses less CPU power) */ #undef FAST_OSD #undef FAST_OSD_TABLE /* Define if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel and VAX). */ /* #define WORDS_BIGENDIAN */ #define ARCH_X86 /* Define this to any prefered value from 386 up to infinity with step 100 */ #define __CPU__ $iproc /*---------------------------------------------------------------------------- ** ** NOTE: Instead of modifying these definitions here, use the ** --enable/--disable options of the ./configure script! ** See ./configure --help for details. ** *---------------------------------------------------------------------------*/ /* termcap flag for getch2.c */ $_termcap $_png /* Extension defines */ $_mlib // available only on solaris $_3dnowm // only define if you have 3DNOW (AMD k6-2, AMD Athlon, iDT WinChip, etc.) $_3dnowexm // only define if you have 3DNOWEX (AMD Athlon, etc.) $_mmx // only define if you have MMX $_mmx2 // only define if you have MMX2 $_ssem // only define if you have SSE (Intel Pentium III or Celeron II) /* libvo options */ #define SCREEN_SIZE_X $_x #define SCREEN_SIZE_Y $_y $_x11 $_xv $_vm $_gl $_dga $_dga2 $_sdldef /* defined for SDLlib with keyrepeat bugs (before 1.2.1) */ $_sdlbuggy $_3dfx $_mga $_syncfb $_fbdev $_svga #if defined(HAVE_GL)||defined(HAVE_X11)||defined(HAVE_XV) #define X11_FULLSCREEN #endif EOF echo "Creating libvo/config.mak" _voobj=`echo $_vosrc | sed -e 's/\.c/\.o/g'` cat > libvo/config.mak << EOF include ../config.mak OPTIONAL_SRCS=$_vosrc OPTIONAL_OBJS=$_voobj EOF echo "Creating libac3/config.mak" if [ $_sse = yes ]; then _downmixc='downmix/downmix_kni.S' _downmixo='downmix/downmix_kni.o' else if [ $_3dnow = yes ]; then _downmixc='downmix/downmix_3dnow.S' _downmixo='downmix/downmix_3dnow.o' else if [ $_binutils = yes ]; then _downmixc='downmix/downmix_i386.S' _downmixo='downmix/downmix_i386.o' else _downmixc='downmix/downmix.c' _downmixo='downmix/downmix.o' cat << EOF !!! Warning! fallback to slow downmix.c due the old binutils. !!! Upgrade for better audio decoding performance. EOF fi fi fi cat > libac3/config.mak << EOF include ../config.mak OPTIONAL_SRCS = $_downmixc OPTIONAL_OBJS = $_downmixo EOF echo "Creating mp3lib/config.mak" if [ $_3dnowex = yes ]; then _mp3libobjectsrcs='dct36_k7.s dct64_k7.s decode_k7.s dct36_3dnow.s dct64_3dnow.s decode_3dnow.s' _mp3libobjectobjs='dct36_k7.o dct64_k7.o decode_k7.o dct36_3dnow.o dct64_3dnow.o decode_3dnow.o' else if [ $_3dnow = yes ]; then _mp3libobjectsrcs='dct36_3dnow.s dct64_3dnow.s decode_3dnow.s' _mp3libobjectobjs='dct36_3dnow.o dct64_3dnow.o decode_3dnow.o' else if [ $_sse = yes ]; then _mp3libobjectsrcs='decode_sse.s' _mp3libobjectobjs='decode_sse.o' else _mp3libobjectsrcs= _mp3libobjectobjs= fi fi fi cat > mp3lib/config.mak << EOF include ../config.mak OPTIONAL_SRCS = $_mp3libobjectsrcs OPTIONAL_OBJS = $_mp3libobjectobjs EOF cat << EOF Config files successfully generated by ./configure ! Please check config.h and config.mak files, tune CPU and optimization flags if you don't like these defaults. You can compile the program with 'make dep;make' and install with 'make install'. Good luck! EOF if [ $_mtrr = yes ]; then echo "Please check mtrr settings at /proc/mtrr (see DOCS/MTRR)" echo fi if [ $_sdl = outdated ]; then echo "You have libSDL installed, but your version is outdated (earlier then" echo "v.1.1.7), SDL support has been disabled please update, if you want to" echo "use it (libSDL v1.1.8 and v1.2.0 are tested and known to work, recent" echo "versions are available from http://www.libsdl.org/)." echo "After updating you need to re-run ./configure and recompile to enable SDL." echo fi if [ $_win32libdirnotify = yes ]; then echo "Missing WIN32 codecs dir at $_win32libdir !" echo "Make it and copy DLL files to there! (You can get them from your windows" echo "directory or download ftp://thot.banki.hu/esp-team/linux/MPlayer/w32codec.zip" else echo "Ok, Win32 codecs directory at $_win32libdir already exists." fi