view vidix/sysdep/pci_linux.c @ 31250:a7c91e121d79

Default to -correct-pts off if -fps was given, since -fps has no effect (and doesn't really make sense) with correct-pts mode.

/*
   This file is based on:
   $XFree86: xc/programs/Xserver/hw/xfree86/etc/scanpci.c,v 3.34.2.17 1998/11/10 11:55:40 dawes Exp $
   Modified for readability by Nick Kurshev
*/
/*
 * Copyright 1995 by Robin Cutshaw <[e-mail]>
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that
 * copyright notice and this permission notice appear in supporting
 * documentation, and that the names of the above listed copyright holder(s)
 * not be used in advertising or publicity pertaining to distribution of
 * the software without specific, written prior permission.  The above listed
 * copyright holder(s) make(s) no representations about the suitability of this
 * software for any purpose.  It is provided "as is" without express or
 * implied warranty.
 *
 * THE ABOVE LISTED COPYRIGHT HOLDER(S) DISCLAIM(S) ALL WARRANTIES WITH REGARD
 * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS, IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE
 * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
 * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
 * IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <errno.h>
#ifdef __i386__
//#include <sys/perm.h> doesn't exist on libc5 systems
int iopl();
#elif defined(__sh__)
#define iopl(x) 1
#else
#if !defined(__sparc__) && !defined(__powerpc__) && !defined(__x86_64__)
#include <sys/io.h>
#endif
#endif

#include "config.h"

#ifdef CONFIG_DHAHELPER
#include <fcntl.h>
int dhahelper_initialized = 0;
int dhahelper_fd = 0;
#endif

#ifdef CONFIG_SVGAHELPER
#include <svgalib_helper.h>
#include <linux/ioctl.h>
#include <fcntl.h>
#ifndef SVGALIB_HELPER_IOC_MAGIC
/* svgalib 1.9.18+ compatibility ::atmos */
#define SVGALIB_HELPER_IOCGPCIINL SVGAHELPER_PCIINL
#endif
int svgahelper_initialized = 0;
int svgahelper_fd = 0;

static int pci_config_type(void)
{
    return 1;
}

static long pci_config_read_long(
          unsigned char bus,
          unsigned char dev,
          int func,
          unsigned cmd)
{
    pcic_t p;

    p.address = cmd;
    p.pcipos = (bus << 8) | dev | (func << 5);

    if (ioctl(svgahelper_fd, SVGALIB_HELPER_IOCGPCIINL, &p))
	return -1;

    return p.val;
}

static int pci_get_vendor(
          unsigned char bus,
          unsigned char dev,
          int func)
{
    return pci_config_read_long(bus, dev, func, 0);
}
#endif /* CONFIG_SVGAHELPER */

static __inline__ int enable_os_io(void)
{
#ifdef CONFIG_SVGAHELPER
    svgahelper_fd = open(DEV_SVGA, O_RDWR);
    if (svgahelper_fd > 0)
    {
	svgahelper_initialized = 1;
	return 0;
    }
    svgahelper_initialized = -1;
#endif

#ifdef CONFIG_DHAHELPER
    dhahelper_fd = open("/dev/dhahelper", O_RDWR);
    if (dhahelper_fd > 0)
    {
	dhahelper_initialized = 1;
	return 0;
    }
    dhahelper_initialized = -1;
#endif

#if defined(__powerpc__) && defined(__linux__)
/* should be fixed? */
#else
    if (iopl(3) != 0)
	return errno;
#endif
    return 0;
}

static __inline__ int disable_os_io(void)
{
#ifdef CONFIG_SVGAHELPER
    if (svgahelper_initialized == 1)
	close(svgahelper_fd);
    else
#endif
#ifdef CONFIG_DHAHELPER
    if (dhahelper_initialized == 1)
	close(dhahelper_fd);
    else
#endif
#if defined(__powerpc__) && defined(__linux__)
/* should be fixed? */
#else
    if (iopl(0) != 0)
	return errno;
#endif
    return 0;
}

#if (defined(__powerpc__) || defined(__sparc__) || defined(__sparc64__) \
    || defined(__x86_64__) || defined(__sh__)) && defined(__linux__) && !defined(CONFIG_SVGAHELPER)
#define CONFIG_PCI_LINUX_PROC
#endif

#if defined(CONFIG_PCI_LINUX_PROC)
static int pci_config_type( void ) { return 1; }

/* pci operations for (powerpc) Linux
   questions, suggestions etc:
   [e-mail], [e-mail]*/
#include <fcntl.h>
//#include <sys/io.h>
#include <linux/pci.h>
#include "libavutil/common.h"
#include "mpbswap.h"

static int pci_get_vendor(
          unsigned char bus,
          unsigned char dev,
          int func)
{
    int retval;
    char path[100];
    int fd;
    short vendor, device;
    sprintf(path,"/proc/bus/pci/%02d/%02x.0", bus, dev);
    fd = open(path,O_RDONLY|O_SYNC);
    if (fd == -1) {
	    retval=0xFFFF;
    }
    else if (pread(fd, &vendor, 2, PCI_VENDOR_ID) == 2 &&
             pread(fd, &device, 2, PCI_DEVICE_ID) == 2) {
	    vendor = le2me_16(vendor);
	    device = le2me_16(device);
	    retval = vendor + (device<<16); /*no worries about byte order,
	    				      all ppc are bigendian*/
    } else {
	    retval = 0xFFFF;
    }
    if (fd > 0) {
	    close(fd);
    }
    return retval;
}

static long pci_config_read_long(
          unsigned char bus,
          unsigned char dev,
          int func,
          unsigned cmd)
{
    long retval;
    char path[100];
    int fd;
    sprintf(path,"/proc/bus/pci/%02d/%02x.0", bus, dev);
    fd = open(path,O_RDONLY|O_SYNC);
    if (fd == -1) {
	    retval=0;
    }
    else if (pread(fd, &retval, 4, cmd) == 4) {
	    retval = le2me_32(retval);
    } else {
	    retval = 0;
    }
    if (fd > 0) {
	    close(fd);
    }
    return retval;
}
#endif /* defined(CONFIG_PCI_LINUX_PROC) */