Mercurial > mplayer.hg
view vidix/pm3_vid.c @ 35005:b1a1dcae9760
Replace MESA YCBCR support by the Apple variant.
This adds hardware support for yuy2 and uyvy color formats when running
on OSX.
In addition add some hacks to make it fast (at least on PPC Mac Mini running
OSX 10.5), ca. 20% faster than -vo corevideo.
The MESA YCBCR variant never worked properly and has become even more broken
and thus been disabled in most maintained drivers and thus is really
a dead-end.
author | reimar |
---|---|
date | Sat, 18 Aug 2012 15:54:34 +0000 |
parents | 0f1b5b68af32 |
children | 945eab072c9d |
line wrap: on
line source
/* * VIDIX driver for 3DLabs Glint R3 and Permedia 3 chipsets. * Copyright (C) 2002 Måns Rullgård * * This file is part of MPlayer. * * MPlayer is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * MPlayer is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with MPlayer; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <inttypes.h> #include <unistd.h> #include "config.h" #include "vidix.h" #include "fourcc.h" #include "dha.h" #include "pci_ids.h" #include "pci_names.h" #include "pm3_regs.h" #if 0 #define TRACE_ENTER() fprintf(stderr, "%s: enter\n", __FUNCTION__) #define TRACE_EXIT() fprintf(stderr, "%s: exit\n", __FUNCTION__) #else #define TRACE_ENTER() #define TRACE_EXIT() #endif static pciinfo_t pci_info; void *pm3_reg_base; static void *pm3_mem; static vidix_capability_t pm3_cap = { "3DLabs GLINT R3/Permedia3 driver", "Måns Rullgård <mru@users.sf.net>", TYPE_OUTPUT, { 0, 0, 0, 0 }, 2048, 2048, 4, 4, -1, FLAG_UPSCALER|FLAG_DOWNSCALER, VENDOR_3DLABS, -1, { 0, 0, 0, 0 } }; static unsigned short pm3_card_ids[] = { DEVICE_3DLABS_GLINT_R3 }; static int find_chip(unsigned chip_id) { unsigned i; for(i = 0;i < sizeof(pm3_card_ids)/sizeof(unsigned short);i++) { if(chip_id == pm3_card_ids[i]) return i; } return -1; } static int pm3_probe(int verbose, int force) { pciinfo_t lst[MAX_PCI_DEVICES]; unsigned i,num_pci; int err; err = pci_scan(lst,&num_pci); if(err) { printf("[pm3] Error occurred during pci scan: %s\n",strerror(err)); return err; } else { err = ENXIO; for(i=0; i < num_pci; i++) { if(lst[i].vendor == VENDOR_3DLABS) { int idx; const char *dname; idx = find_chip(lst[i].device); if(idx == -1) continue; dname = pci_device_name(VENDOR_3DLABS, lst[i].device); dname = dname ? dname : "Unknown chip"; printf("[pm3] Found chip: %s\n", dname); #if 0 if ((lst[i].command & PCI_COMMAND_IO) == 0) { printf("[pm3] Device is disabled, ignoring\n"); continue; } #endif pm3_cap.device_id = lst[i].device; err = 0; memcpy(&pci_info, &lst[i], sizeof(pciinfo_t)); break; } } } if(err && verbose) printf("[pm3] Can't find chip\n"); return err; } #define PRINT_REG(reg) \ { \ long _foo = READ_REG(reg); \ printf("[pm3] " #reg " (%x) = %#lx (%li)\n", reg, _foo, _foo); \ } static int pm3_init(void) { pm3_reg_base = map_phys_mem(pci_info.base0, 0x20000); pm3_mem = map_phys_mem(pci_info.base2, 0x2000000); return 0; } static void pm3_destroy(void) { unmap_phys_mem(pm3_reg_base, 0x20000); unmap_phys_mem(pm3_mem, 0x2000000); } static int pm3_get_caps(vidix_capability_t *to) { memcpy(to, &pm3_cap, sizeof(vidix_capability_t)); return 0; } static int is_supported_fourcc(uint32_t fourcc) { switch(fourcc){ case IMGFMT_YUY2: case IMGFMT_UYVY: return 1; default: return 0; } } static int pm3_query_fourcc(vidix_fourcc_t *to) { if(is_supported_fourcc(to->fourcc)) { to->depth = VID_DEPTH_ALL; to->flags = VID_CAP_EXPAND | VID_CAP_SHRINK | VID_CAP_COLORKEY; return 0; } else to->depth = to->flags = 0; return ENOSYS; } #define FORMAT_RGB8888 PM3VideoOverlayMode_COLORFORMAT_RGB8888 #define FORMAT_RGB4444 PM3VideoOverlayMode_COLORFORMAT_RGB4444 #define FORMAT_RGB5551 PM3VideoOverlayMode_COLORFORMAT_RGB5551 #define FORMAT_RGB565 PM3VideoOverlayMode_COLORFORMAT_RGB565 #define FORMAT_RGB332 PM3VideoOverlayMode_COLORFORMAT_RGB332 #define FORMAT_BGR8888 PM3VideoOverlayMode_COLORFORMAT_BGR8888 #define FORMAT_BGR4444 PM3VideoOverlayMode_COLORFORMAT_BGR4444 #define FORMAT_BGR5551 PM3VideoOverlayMode_COLORFORMAT_BGR5551 #define FORMAT_BGR565 PM3VideoOverlayMode_COLORFORMAT_BGR565 #define FORMAT_BGR332 PM3VideoOverlayMode_COLORFORMAT_BGR332 #define FORMAT_CI8 PM3VideoOverlayMode_COLORFORMAT_CI8 #define FORMAT_VUY444 PM3VideoOverlayMode_COLORFORMAT_VUY444 #define FORMAT_YUV444 PM3VideoOverlayMode_COLORFORMAT_YUV444 #define FORMAT_VUY422 PM3VideoOverlayMode_COLORFORMAT_VUY422 #define FORMAT_YUV422 PM3VideoOverlayMode_COLORFORMAT_YUV422 /* Notice, have to check that we don't overflow the deltas here ... */ static void compute_scale_factor( short* src_w, short* dst_w, uint32_t* shrink_delta, uint32_t* zoom_delta) { /* NOTE: If we don't return reasonable values here then the video * unit can potential shut off and won't display an image until re-enabled. * Seems as though the zoom_delta is o.k, and I've not had the problem. * The 'shrink_delta' is prone to this the most - FIXME ! */ if (*src_w >= *dst_w) { *src_w &= ~0x3; *dst_w &= ~0x3; *shrink_delta = (((*src_w << 16) / *dst_w) + 0x0f) & 0x0ffffff0; *zoom_delta = 1<<16; if ( ((*shrink_delta * *dst_w) >> 16) & 0x03 ) *shrink_delta += 0x10; } else { *src_w &= ~0x3; *dst_w &= ~0x3; *zoom_delta = (((*src_w << 16) / *dst_w) + 0x0f) & 0x0001fff0; *shrink_delta = 1<<16; if ( ((*zoom_delta * *dst_w) >> 16) & 0x03 ) *zoom_delta += 0x10; } } static int frames[VID_PLAY_MAXFRAMES]; static long overlay_mode, overlay_control; static int pm3_config_playback(vidix_playback_t *info) { uint32_t shrink, zoom; short src_w, drw_w; short src_h, drw_h; long base0; int pitch; int format; unsigned int i; TRACE_ENTER(); if(!is_supported_fourcc(info->fourcc)) return -1; switch(info->fourcc){ case IMGFMT_YUY2: format = FORMAT_YUV422; break; case IMGFMT_UYVY: format = FORMAT_VUY422; break; default: return -1; } src_w = info->src.w; src_h = info->src.h; drw_w = info->dest.w; drw_h = info->dest.h; pitch = src_w; /* Assume we have 16 MB to play with */ info->num_frames = 0x1000000 / (pitch * src_h * 2); if(info->num_frames > VID_PLAY_MAXFRAMES) info->num_frames = VID_PLAY_MAXFRAMES; /* Start at 16 MB. Let's hope it's not in use. */ base0 = 0x1000000; info->dga_addr = pm3_mem + base0; info->dest.pitch.y = 2; info->dest.pitch.u = 0; info->dest.pitch.v = 0; info->offset.y = 0; info->offset.v = 0; info->offset.u = 0; info->frame_size = pitch * src_h * 2; for(i = 0; i < info->num_frames; i++){ info->offsets[i] = info->frame_size * i; frames[i] = (base0 + info->offsets[i]) >> 1; } compute_scale_factor(&src_w, &drw_w, &shrink, &zoom); WRITE_REG(PM3VideoOverlayBase0, base0 >> 1); WRITE_REG(PM3VideoOverlayStride, PM3VideoOverlayStride_STRIDE(pitch)); WRITE_REG(PM3VideoOverlayWidth, PM3VideoOverlayWidth_WIDTH(src_w)); WRITE_REG(PM3VideoOverlayHeight, PM3VideoOverlayHeight_HEIGHT(src_h)); WRITE_REG(PM3VideoOverlayOrigin, 0); /* Scale the source to the destinationsize */ if (src_h == drw_h) { WRITE_REG(PM3VideoOverlayYDelta, PM3VideoOverlayYDelta_NONE); } else { WRITE_REG(PM3VideoOverlayYDelta, PM3VideoOverlayYDelta_DELTA(src_h, drw_h)); } if (src_w == drw_w) { WRITE_REG(PM3VideoOverlayShrinkXDelta, 1<<16); WRITE_REG(PM3VideoOverlayZoomXDelta, 1<<16); } else { WRITE_REG(PM3VideoOverlayShrinkXDelta, shrink); WRITE_REG(PM3VideoOverlayZoomXDelta, zoom); } WRITE_REG(PM3VideoOverlayIndex, 0); /* Now set the ramdac video overlay region and mode */ RAMDAC_SET_REG(PM3RD_VideoOverlayXStartLow, (info->dest.x & 0xff)); RAMDAC_SET_REG(PM3RD_VideoOverlayXStartHigh, (info->dest.x & 0xf00)>>8); RAMDAC_SET_REG(PM3RD_VideoOverlayXEndLow, (info->dest.x+drw_w) & 0xff); RAMDAC_SET_REG(PM3RD_VideoOverlayXEndHigh, ((info->dest.x+drw_w) & 0xf00)>>8); RAMDAC_SET_REG(PM3RD_VideoOverlayYStartLow, (info->dest.y & 0xff)); RAMDAC_SET_REG(PM3RD_VideoOverlayYStartHigh, (info->dest.y & 0xf00)>>8); RAMDAC_SET_REG(PM3RD_VideoOverlayYEndLow, (info->dest.y+drw_h) & 0xff); RAMDAC_SET_REG(PM3RD_VideoOverlayYEndHigh, ((info->dest.y+drw_h) & 0xf00)>>8); RAMDAC_SET_REG(PM3RD_VideoOverlayKeyR, 0xff); RAMDAC_SET_REG(PM3RD_VideoOverlayKeyG, 0x00); RAMDAC_SET_REG(PM3RD_VideoOverlayKeyB, 0xff); overlay_mode = 1 << 5 | format | PM3VideoOverlayMode_FILTER_FULL | PM3VideoOverlayMode_BUFFERSYNC_MANUAL | PM3VideoOverlayMode_FLIP_VIDEO; overlay_control = PM3RD_VideoOverlayControl_KEY_COLOR | PM3RD_VideoOverlayControl_MODE_MAINKEY | PM3RD_VideoOverlayControl_DIRECTCOLOR_ENABLED; TRACE_EXIT(); return 0; } static int pm3_playback_on(void) { TRACE_ENTER(); WRITE_REG(PM3VideoOverlayMode, overlay_mode | PM3VideoOverlayMode_ENABLE); RAMDAC_SET_REG(PM3RD_VideoOverlayControl, overlay_control | PM3RD_VideoOverlayControl_ENABLE); WRITE_REG(PM3VideoOverlayUpdate, PM3VideoOverlayUpdate_ENABLE); TRACE_EXIT(); return 0; } static int pm3_playback_off(void) { RAMDAC_SET_REG(PM3RD_VideoOverlayControl, PM3RD_VideoOverlayControl_DISABLE); WRITE_REG(PM3VideoOverlayMode, PM3VideoOverlayMode_DISABLE); RAMDAC_SET_REG(PM3RD_VideoOverlayKeyR, 0x01); RAMDAC_SET_REG(PM3RD_VideoOverlayKeyG, 0x01); RAMDAC_SET_REG(PM3RD_VideoOverlayKeyB, 0xfe); return 0; } static int pm3_frame_select(unsigned int frame) { WRITE_REG(PM3VideoOverlayBase0, frames[frame]); return 0; } VDXDriver pm3_drv = { "pm3", NULL, .probe = pm3_probe, .get_caps = pm3_get_caps, .query_fourcc = pm3_query_fourcc, .init = pm3_init, .destroy = pm3_destroy, .config_playback = pm3_config_playback, .playback_on = pm3_playback_on, .playback_off = pm3_playback_off, .frame_sel = pm3_frame_select, };