view configure @ 1112:b1cf1087ec33

Added support for writing wave files and specifying filename to write to.
author atmosfear
date Tue, 12 Jun 2001 14:24:26 +0000
parents d0f59ca7346f
children ce92a1d0c60c
line wrap: on
line source

#!/bin/sh

#
# MPlayer configurator.   (C) 2000 Pontscho/fresh!mindworkz
#				   pontscho@makacs.poliod.hu
#
# Changes in reversed order:
#
# 2001/06/05 by Pontscho
# - added alsa and esd detection
#
# 2001/06/05 by Nick Kurshev
# - added checking of kernel version
#
# 2001/06/04 by Nick Kurshev
# - added hard checking of gcc and soft of assembler
#
# 2001/05/40 by LGB
#  - added --prefix support
#
# 2001/05/22 by Nick Kurshev
#  - added definition of CPU clone
#
# 2001/04/16 by LGB
#  - added libcss stuffs
#
# 2001/04/15 by Pontscho
#  - added --disable-select option
#  - added X11DIR variable in config.mak and fix syncfb Makefile -L/usr/X11/lib bug 
#
# 2001/03/24 by Mike Graffam:
#  - added autodetect code for XF86VidMode, along with explicit --enable-vm
#
# 2001/03/22 by Bivanbi:
#  - new option: --cc  (to specify C compiler path+name)
#
# 2001/03/08 by LGB:
#  - DGA detect-o-matic :)
#  - '--disable-dga' option to force disabling DGA vo driver compiling into mplayer
#  - line about '--enable-dga' is added to the help message
#
# 2001/02/26 by A'rpi:
#  - added DGA option:  --enable-dga
#  - no notify if --with-win32libdir used [Tibcu]
#
# 2001/02/25 by LGB:
#  - TMPDIR or TEMPDIR variable is honored during tests for temporary files
#  - ChangeLog inside configure was reversed ;-)
#
# some changes by A'rpi/ESP-team:
#  - added 'athlon' target for the new athlongcc [Ian Kumlien]
#  - applied _win32libdir=-L patch by Magnus Pfeffer
#
# some changes by LGB:
#  - Ehhh, AMD K6-2 returns with cpuid 5 ;-) Changing back Arpi's last change :)
#    More info: AMD K6-2 reports with family 5, duron with 6, so I attached
#    much finer CPU type detection based on Linux kernel's one :)
#    (k5: 5, model<6, k6: 5, model>=6, k7: 6, model=any)
#  - On some exit point (error) temporary files were not deleted. Fixed.
#  - $TMP and $TMP2 are renamed to $TMPC and $TMPO ;-)
#  - Some useless { ... } are removed
#
# some changes by A'rpi/ESP-team:
#  - the --with-win32libdir patch by Aaron Hope applied
#  - some english bugfix again :)
#  - cpu type selection changed:
#    ( k7->k6->k5-> ) || (i686->pentiumpro-> ) pentium-> i486 -> i386 -> error!
#  - cpu type for AMD/family=5 changed k6->k5
#
# some changes by LGB (Gábor Lénárt):
#  - SOME gcc may support 'k7', so I added tests for ALL CPU type optimization
#    switches with the ability to find out the best optimization for your CPU.
#  - Help moved to the begining to avoid tests if user only wants help.
#  - A one lined help to indicate detailed help for users
#  - Fixed /tmp race (PIDs can be predicted, I added random numbers as well)
#
# some changes by A'rpi/ESP-team:
#  - some english bugfix :)
#  - removed _??exists flags, _?? is enough...
#  - creating only config.mak files instead of whole Makefiles
#
# --


# Check how echo works in this /bin/sh
case `echo -n` in
-n)     _echo_n=   _echo_c='\c';;
*)      _echo_n=-n _echo_c=;;
esac


# LGB: Help moved here.

if [ "$1" = "--help" -o "$1" = "-help" -o "$1" = "-h" ]; then
cat << EOF

usage: $0 [options]

params:
        --cc                    use this C compiler to build MPlayer [gcc]
	--prefix=DIR		use this prefix for installing mplayer [/usr/local]
	--enable-debug[=1-3]	compile debugging information into mplayer [disable]
	--enable-profile	compile profiling information into mplayer [disable]
        --enable-mmx            build with mmx support [autodetect]
        --enable-mmx2           build with mmx2 support (PIII, Athlon) [autodetect]
        --enable-3dnow          build with 3dnow! support [autodetect]
        --enable-3dnowex        build with 3dnow-dsp! support (K7) [autodetect]
        --enable-sse            build with sse support [autodetect]
        --enable-gl             build with OpenGL render support [autodetect]
        --enable-dga            build with DGA support [autodetect]
        --enable-svga           build with SVGAlib support [autodetect]
        --enable-sdl            build with SDL render support [autodetect]
        --enable-mga            build with mga_vid support [autodetect, if /dev/mga_vid
                                is available]
	--enable-xmga           build with mga_vid X Window support [autodetect,
				if both /dev/mga_vid and x11 are available]
        --enable-xv             build with Xv render support for X 4.x [autodetect]
	--enable-vm		build with XF86VidMode support for x11 driver
        --enable-x11            build with X11 render support [autodetect]
	--enable-fbdev		build with FBDev render support [_not_ autodetected]
	--enable-mlib		build with MLIB support ( only Solaris )

	--enable-termcap	use termcap database for key codes
	--enable-xmmp	        use XMMP audio drivers
	--enable-lirc	        enable LIRC (remote control) support

        --disable-ossaudio      disable OSS sound support [autodetect]
        --disable-alsa          disable alsa sound support [autodetect]
	--disable-esd           disable esd sound support [autodetect]
        --disable-sunaudio      disable Sun sound support [autodetect]
		
	--disable-gcc-checking  disable gcc version checking

	--disable-select        disable audio select() support ( for example required this
	                        option ALSA or Vortex2 driver )

	--disable-dshow         disable DirectShow support (if you don't have
                                C++ compiler&libs, or you've found dshow codecs
                                slower than old VfW ones)

	--disable-fastmemcpy    disable 3dnow/sse/mmx optimized memcpy()

        --with-x11libdir=DIR    X library files are in DIR
        --with-win32libdir=DIR  windows codec files
        --with-csslibdir=DIR    directory contains libcss.so shared library
        --with-cssincdir=DIR    directory contains libcss header file (css.h)
                                (--with-css* only needed, if libCSS autodetect fails)
        --with-sdl-config=PATH  specify location of sdl-config if it's not in your PATH
                                (example: --with-sdl-cofig=/usr/sdl/bin/sdl-config)

	--size-x=SIZE		default screen width
	--size-y=SIZE		default screen height
EOF
exit 0
fi

# LGB: Some inital help

echo "You can get detailed help on configure with: $0 --help"
echo "Please wait while ./configure discovers your software and hardware environment!"

# LGB: temporary files

TMPC="mplayer-conf-${RANDOM}-$$-${RANDOM}.c"
TMPO="mplayer-conf-${RANDOM}-$$-${RANDOM}.o"
TMPS="mplayer-conf-${RANDOM}-$$-${RANDOM}.S"

if [ ! -z "$TMPDIR" ]; then
	TMPC="${TMPDIR}/${TMPC}"
	TMPO="${TMPDIR}/${TMPO}"
	TMPS="${TMPDIR}/${TMPS}"
elif [ ! -z "$TEMPDIR" ]; then
	TMPC="${TEMPDIR}/${TMPC}"
	TMPO="${TEMPDIR}/${TMPO}"
	TMPS="${TEMPDIR}/${TMPS}"
else
	TMPC="/tmp/${TMPC}"
	TMPO="/tmp/${TMPO}"
	TMPS="/tmp/${TMPS}"
fi

# ---

# config files
CCONF='config.h'
MCONF='config.mak'

# ---  Check for C compiler:

_cc=gcc
_as=as
_x11=auto

_x11libdir=
if [ -d /usr/X11R6 ]; then
 _x11libdir=-L/usr/X11R6/lib
else
 if [ -d /usr/X11 ]; then
  _x11libdir=-L/usr/X11/lib
 fi
fi

_skip_cc_check=no
_skip_as_check=no
_sdlconfig='sdl-config'

for ac_option
do
 case "$ac_option" in
  --cc=*)
        _cc=`echo $ac_option | cut -d '=' -f 2`
        ;;
  --as=*)
        _as=`echo $ac_option | cut -d '=' -f 2`
        ;;
  --disable-gcc-checking)
        _skip_cc_check=yes
	;;
  --disable-as-checking)
        _skip_as_check=yes
	;;
  --with-x11libdir=*)
        _x11libdir=-L`echo $ac_option | cut -d '=' -f 2`
        ;;
  --enable-x11)
        _x11=yes
        ;;
  --disable-x11)
        _x11=no
        ;;
  --with-sdl-config=*)
        _sdlconfig=`echo $ac_option | cut -d '=' -f 2`
        ;;
 esac
done

# ---

# Checking CC version...
# Q: what's with egcs, pgcc? - Atmos
# A: same as with agcc! These compilers always were introduced as experimental
# ones. Now gcc-3.0 should introduce all features of these compilers.
# Since 3.0 is almost released we don't need to support them. - Nick 05 jun 2001
if test "$_skip_cc_check" != "yes"; then
echo $_echo_n "Checking version of $_cc ... $_echo_c"
cc_version=`$_cc -v 2>&1 | sed -n 's/^.*version \([aegcygnustp-]*[0-9.]*\).*$/\1/p'`
case $cc_version in
    '') cc_version="v. ?.??, bad"; cc_verc_fail=yes;;
    2.95.[2-9]|3.[0-9])
       cc_version="$cc_version, ok";;
    *) cc_version="$cc_version, bad"; cc_verc_fail=yes;;
esac
echo "$cc_version"
if [ ! -z "$cc_verc_fail" ] ; then
echo "Please downgrade(upgrade) gcc compiler to gcc-2.95.2+ or gcc-3.0+ version"
exit
fi
else
echo "YOU'VE SELECTED '--disable-gcc-checking'. PLEASE DON'T SEND US ANY BUGREPORTS!"
fi
# ---


if [ -r /proc/cpuinfo ]; then
	# linux with /proc mounted, extract cpu information from it
	_cpuinfo="cat /proc/cpuinfo"
else
	# all other OS try to extract cpu information from a small helper
	# program TOOLS/cpuinfo instead
	$_cc -o TOOLS/cpuinfo TOOLS/cpuinfo.c
	_cpuinfo="TOOLS/cpuinfo"
fi

pname=`$_cpuinfo | grep 'model name' | cut -d ':' -f 2`
pparam=`$_cpuinfo | grep 'features' | cut -d ':' -f 2`
if [ -z "$pparam" ]; then
  pparam=`$_cpuinfo | grep 'flags' | cut -d ':' -f 2`
fi
pvendor=`$_cpuinfo | grep 'vendor_id' | cut -d ':' -f 2  | cut -d ' ' -f 2`
pfamily=`$_cpuinfo | grep 'cpu family' | cut -d ':' -f 2 | cut -d ' ' -f 2`
pmodel=`$_cpuinfo | grep -v 'model name' | grep 'model' | cut -d ':' -f 2 | cut -d ' ' -f 2`
pstepping=`$_cpuinfo | grep 'stepping' | cut -d ':' -f 2 | cut -d ' ' -f 2`

_mmx=no
_mmx2=no
_3dnow=no
_3dnowex=no
_mtrr=no
_sse=no

_mga=no
_gl=no
_sdl=no
_xv=no
_vm=no
_xdpms=no
_3dfx=no
_syncfb=no
_mlib=no
_mpg123=no
_xmga=no
_dga=no
_dga2=no
_svga=no
_fbdev=no
[ x`uname -s` = xLinux ] && _fbdev=yes
_lirc=no
_css=no
_dshow=yes
_fastmemcpy=yes
_streaming=no

_x=1
_y=1

_gllib=
_sdllib=
_sdlcflags=
_xvlib=
_x11lib=

_select='#define HAVE_AUDIO_SELECT'

_gui=no;

_alsa=yes
_esd=yes

for i in `echo $pparam`; do

 case "$i" in
  3dnow)
        _3dnow=yes
        _mpg123=yes
        ;;
  3dnowext)
        _3dnow=yes
        _3dnowex=yes
        _mpg123=yes
        ;;
  mmx)
        _mmx=yes
        ;;
  mmxext)
        _mmx2=yes
        ;;
  mtrr)
        _mtrr=yes
        ;;
  k6_mtrr)
        _mtrr=yes
        ;;
  xmm)
        _sse=yes
        _mmx2=yes
        ;;
  sse)
        _sse=yes
        _mmx2=yes
        ;;
  kni)
        _sse=yes
        _mmx2=yes
        ;;
 esac

done


_win32libdirnotify=no
if [ -d /usr/lib/win32 ]; then
 _win32libdir=/usr/lib/win32
else
 if [ -d /usr/local/lib/win32 ]; then
  _win32libdir=/usr/local/lib/win32
 else
# This is our default:
  _win32libdir=/usr/lib/win32
  _win32libdirnotify=yes
 fi
fi


if [ -c /dev/mga_vid ]; then
 _mga=yes
 _syncfb=yes
fi

proc=pentium
iproc=586

case "$pvendor" in
 AuthenticAMD)
   case "$pfamily" in
    3)
      proc=i386
      iproc=386
      ;;
    4)
      proc=i486
      iproc=486
      ;;
    5)
      if [ $pmodel -ge 6 ]; then	# LGB: models are: K5/SSA5 K5 K5 K5 ? ? K6 K6 K6-2 K6-3 
    	    proc=k6
      else
    	    proc=k5
      fi
      iproc=586
      ;;
    6|7)				# LGB: Though it seems Athlon CPUs returns with "6"
      proc=k7
      iproc=686
      ;;
    *)
      proc=pentium
      iproc=586
      ;;
   esac
   ;;
 GenuineIntel)
   case "$pfamily" in
    3)
      proc=i386
      iproc=386
      ;;
    4)
      proc=i486
      iproc=486
      ;;
    5)
      proc=pentium
      iproc=586
      ;;
    6)
      proc=i686
      iproc=686
      ;;
    *)
      proc=pentium
      iproc=586
      ;;
   esac
   ;;
 unknown)              # added by Gabucino - upon Tibcu's request
   case "$pfamily" in
    3)
      proc=i386
      iproc=386
      ;;
    4)
      proc=i486
      iproc=486
      ;;
    *)
      proc=pentium
      iproc=586
      ;;
   esac
   ;;
 *)
   proc=pentium
   iproc=586
   ;;
esac

# ---

cat > $TMPC << EOF
int main( void ) { return 0; }
EOF

# check that gcc supports our cpu, if not, fallback to pentium
# LGB: check -mcpu and -march swithing step by step with enabling
# to fall back till 386.

#echo -n "Checking your GCC CPU optimalization abilities: "
if [ "$proc" = "k7" ]; then
#	echo -n "trying k7  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=athlon
fi
if [ "$proc" = "athlon" ]; then
#	echo -n "trying athlon  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=k6
fi
if [ "$proc" = "k6" ]; then
#	echo -n "trying k6  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=k5
fi
if [ "$proc" = "k5" ]; then
#	echo -n "trying k5  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=pentium
fi
if [ "$proc" = "i686" ]; then
#	echo -n "trying i686  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=pentiumpro
fi
if [ "$proc" = "pentiumpro" ]; then
#	echo -n "trying pentiumpro  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=pentium
fi
if [ "$proc" = "pentium" ]; then
#	echo -n "trying pentium  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=i486
fi
if [ "$proc" = "i486" ]; then
#	echo -n "trying i486  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=i386
fi
if [ "$proc" = "i386" ]; then
#	echo -n "trying i386  "
	$_cc $TMPC -o $TMPO -march=$proc -mcpu=$proc > /dev/null 2>&1 || proc=error
fi
if [ "$proc" = "error" ]; then
	echo
	echo "Your gcc does not support even \"i386\" for '-march' and '-mcpu'." >&2
	rm -f $TMPC $TMPO $TMPS
	exit
fi
#echo "DONE (${proc})."


$_cc $TMPC -o $TMPO -lvgagl -lvga > /dev/null 2>&1 && _svga=yes

$_cc $TMPC -o $TMPO -lpthread > /dev/null 2>&1 || \
 { echo "Lib pthread not found."; rm -f $TMPC $TMPO $TMPS ; exit 1; }

# Atmosfear: added SDL versioncheck and autodetect; removed warnings.
_sdl=no
if test ! -z "`$_sdlconfig --version 2>/dev/null`" ; then
if $_cc `$_sdlconfig --cflags` $TMPC -o $TMPO `$_sdlconfig --libs` > /dev/null 2>&1 ; then
	_sdlversion=`$_sdlconfig --version | sed 's/[^0-9]//g'`
	if test "$_sdlversion" -gt 116 ; then
		if test "$_sdlversion" -lt 121 ; then

			_sdlbuggy='#define BUGGY_SDL'
		else	
			_sdlbuggy='#undef BUGGY_SDL'
		fi	
		_sdl=yes
	else
		_sdl=outdated
	fi
fi	
fi

# Atmosfear: added libcss autodetect
_css=no
if test -s "/usr/local/lib/libcss.so" ; then
	_csslibdir="/usr/local/lib/"
	if test -s "/usr/local/include/css.h" ; then
		_cssincdir="/usr/local/include"
		_css=yes
	fi	
else
	if test -s "/usr/lib/libcss.so" ; then
		_csslibdir="/usr/lib/"
		if test -s "/usr/include/css.h" ; then
			_cssincdir="/usr/include/"
			_css=yes
		fi	
	fi
fi
	
_termcap=no
$_cc $TMPC -o $TMPO -ltermcap > /dev/null 2>&1 && _termcap=yes

_png=no
$_cc $TMPC -o $TMPO -lpng -lz -lm > /dev/null 2>&1 && _png=yes

_binutils=no
$_as libac3/downmix/downmix_i386.S -o $TMPO > /dev/null 2>&1 && _binutils=yes

# echo binutils: $_binutils


# ----------- Check X11 and related libs (GL, Xxf86vm, Xv, DGA) --------------

# for Solaris (socket stuff is in -lsocket, gethostbyname and friends in -lnsl):
_socklib=
$_cc $TMPC -o $TMPO $_socklib -lsocket >/dev/null 2>&1 && _socklib="$_socklib -lsocket"
$_cc $TMPC -o $TMPO $_socklib -lnsl >/dev/null 2>&1 && _socklib="$_socklib -lnsl"

if [ $_x11 = auto ]; then
  _x11=no
  $_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext $_socklib > /dev/null 2>&1 && _x11=yes
fi

if [ $_x11 = yes ]; then

$_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lXdpms $_socklib > /dev/null 2>&1 && _xdpms=yes
$_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lXv $_socklib > /dev/null 2>&1 && _xv=yes
$_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lXxf86vm $_socklib > /dev/null 2>&1 && _vm=yes

$_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lGL $_socklib > /dev/null 2>&1 && _gl=yes

cat > $TMPC << EOF
#include <GL/gl.h>
int main( void ) { return 0; }
EOF
$_cc $TMPC -o $TMPO $_x11libdir -lX11 -lXext -lGL $_socklib > /dev/null 2>&1 || \
 { _gl=no; echo "GL includes not found!";}

cat > $TMPC << EOF
#include <stdio.h>
#include <X11/Xlib.h>
#include <X11/extensions/xf86dga.h>
int main (void) { return 0;}
EOF

$_cc $TMPC -o $TMPO -L/usr/X11R6/lib -L/usr/X11/lib -lX11 -lXext -lXxf86dga -lXxf86vm $_socklib > /dev/null 2>&1 && _dga=yes
# Note: the -lXxf86vm library is the VideoMode extension and though it's
# not needed for DGA, AFAIK every distribution packages together with DGA
# stuffs named 'X extensions' or something similar. This check can be usefull
# for further mplayer versions to set resolution by mplayer itself.
# If you run into problems, remove '-lXxf86vm'.

# Check if DGA is 2.0 or greater
cat > $TMPC << EOF
#include <stdio.h>
#include <X11/Xlib.h>
#include <X11/extensions/xf86dga.h>
int main (void) { XDGAMode mode; XDGADevice device; return 0;}
EOF

_dga2=no
$_cc $TMPC -o $TMPO -L/usr/X11R6/lib -L/usr/X11/lib -lX11 -lXext -lXxf86dga -lXxf86vm $_socklib > /dev/null 2>&1 && _dga2=yes

fi

rm -f $TMPC $TMPO


# ---
# try to detect type of audio supported on this machine

cat > $TMPC << EOF
#include <sys/soundcard.h>
int main( void ) { return 0; }
EOF

_sys_soundcard_h=no
$_cc -o $TMPO $TMPC 2> /dev/null && _sys_soundcard_h=yes


cat > $TMPC << EOF
#include <sys/soundcard.h>
int main( void ) {  int arg = SNDCTL_DSP_SETFRAGMENT; }
EOF

_oss_audio=no
$_cc -o $TMPO $TMPC 2> /dev/null && _oss_audio=yes


cat > $TMPC << EOF
#include <sys/types.h>
#include <sys/audioio.h>
int main( void ) {  audio_info_t info; AUDIO_INITINFO(&info); }
EOF

_sun_audio=no
$_cc -o $TMPO $TMPC 2> /dev/null && _sun_audio=yes


# ---

cat > $TMPC << EOF
#include <sys/asoundlib.h>
#include <sys/soundcard.h>
int main( void ) { if(SND_LIB_MAJOR==0&&SND_LIB_MINOR==5)return 0; return 1; }
EOF

_alsaver='not found'
$_cc -o $TMPO -lasound $TMPC 2> /dev/null || _alsa=no
[ $_alsa = 'yes' ] && $TMPO && { _alsaver='0.5.x'; }

if [ "$_alsaver" = 'not found' ]; then
cat > $TMPC << EOF
#include <sys/asoundlib.h>
#include <sys/soundcard.h>
int main( void ) { if(SND_LIB_MAJOR==0&&SND_LIB_MINOR==9)return 0; return 1; }
EOF

_alsaver='not found'
$_cc -o $TMPO -lasound $TMPC 2> /dev/null || _alsa=no
[ $_alsa = 'yes' ] && $TMPO && { _alsaver='0.9.x'; }
fi

# ---

cat > $TMPC << EOF
#include <esd.h>
int main( void ){ return 0; }
EOF

$_cc -o $TMPO -lesd $TMPC 2> /dev/null || { _esd=no; }

# ---

# check for the parameters.

_prefix="/usr/local"

for ac_option
do
 case "$ac_option" in
  --enable-profile)
  	_profile='-p'
	;;
  --enable-debug)
  	_debug='-g'
	;;
  --enable-debug=*)
        _debug=`echo -n '-g'; echo $ac_option | cut -d '=' -f 2`
	;;
  --enable-css)
	_css=yes
	;;
  --enable-png)
	_png=yes
	;;
  --enable-sse)
        _sse=yes
        ;;
  --enable-3dnow)
        _3dnow=yes
        ;;
  --enable-3dnowex)
        _3dnow=yes
        _3dnowex=yes
        ;;
  --enable-mmx)
        _mmx=yes
        ;;
  --enable-mmx2)
        _mmx2=yes
        ;;
  --enable-mtrr)
  	_mtrr=yes
	;;
  --enable-gl)
        _gl=yes
        ;;
  --enable-sdl)
        _sdl=yes
        ;;
  --enable-mga)
        _mga=yes
        ;;
  --enable-xmga)
        _xmga=yes
        ;;	
  --enable-svga)
        _svga=yes
        ;;
  --enable-dga)
        _dga=yes
        ;;
  --enable-dga2)
        _dga2=yes
        ;;
  --enable-xv)
        _xv=yes
        ;;
  --enable-vm)
        _vm=yes
        ;;
  --enable-3dfx)
        _3dfx=yes
        ;;
  --enable-syncfb)
        _syncfb=yes
        ;;
  --enable-fbdev)
  	_fbdev=yes
	;;
  --enable-mlib)
	_mlib=yes
	;;
  --enable-termcap)
	_termcap=yes
	;;
  --enable-xmmp)
	_xmmp=yes
	;;
  --enable-ossaudio)
  	_oss_audio=yes
	;;
  --enable-sunaudio)
  	_sun_audio=yes
	;;
  --enable-lirc)
	_lirc=yes
	;;
  --enable-select)
        _select='#define HAVE_AUDIO_SELECT'
	;;
  --enable-gui)
  	_gui=yes
	;;
  --enable-streaming)
  	_streaming=yes
	;;
  --disable-css)
	_css=no
	;;
  --disable-png)
	_png=no
	;;
  --disable-sse)
        _sse=no
        ;;
  --disable-3dnow)
        _3dnow=no
        _3dnowex=no
        ;;
  --disable-3dnowex)
        _3dnowex=no
        ;;
  --disable-mmx)
        _mmx=no
	_mmx2=no
        ;;
  --disable-mmx2)
	_mmx2=no
        ;;
  --disable-mtrr)
  	_mtrr=no
	;;
  --disable-gl)
        _gl=no
        ;;
  --disable-sdl)
        _sdl=no
        ;;
  --disable-mga)
        _mga=no
        ;;
  --disable-xmga)
        _xmga=no
        ;;
  --disable-xv)
        _xv=no
        ;;
  --disable-vm)
        _vm=no
        ;;
  --disable-mlib)
	_mlib=no
	;;
  --disable-svga)
	_svga=no
	;;
  --disable-dga)
	_dga=no
	;;
  --disable-dga2)
        _dga2=no
        ;;
  --disable-fbdev)
  	_fbdev=no
	;;
  --disable-termcap)
	_termcap=no
	;;
  --disable-select)
        _select='#undef HAVE_AUDIO_SELECT'
	;;
  --disable-dshow)
        _dshow=no
	;;
  --disable-fastmemcpy)
        _fastmemcpy=no
	;;
  --disable-gui)
  	_gui=no
	;;
  --disable-alsa)
	_alsaver='notfound'
        _alsa=no
	;;
  --disable-esd)
        _esd=no
        ;;
  --disable-ossaudio)
  	_oss_audio=no
	;;
  --disable-sunaudio)
  	_sun_audio=no
	;;
  --with-win32libdir=*)
        _win32libdir=`echo $ac_option | cut -d '=' -f 2`
	_win32libdirnotify=no
        ;;
  --with-csslibdir=*)
        _csslibdir=`echo $ac_option | cut -d '=' -f 2`
	_css='yes';
	;;
  --with-cssincdir=*)
        _cssincdir=`echo $ac_option | cut -d '=' -f 2`
        _css='yes';
        ;;
  --size-x=*)
	_x=`echo $ac_option | cut -d '=' -f 2`
	;;
  --size-y=*)
	_y=`echo $ac_option | cut -d '=' -f 2`
	;;
  --with-x11libdir=*)
	;;
  --prefix=*)
	_prefix=`echo $ac_option | cut -d '=' -f 2`
        ;;
  --cc=*)
	;;
  --as=*)
	;;
 esac
done

# Checking assembler (_as) compatibility...
as_version=`$_as --version 2>&1 | sed -n 's/^.*assembler \([0-9.]*\).*$/\1/p'`
echo $_echo_n "Checking assembler (as) ... $as_version, $_echo_c"
_pref_as_version='2.9.1'
### this test disabled, see _binutils test above!  --A'rpi
# cat > astest.S <<EOF
# filds -2(%ebp)
# EOF
# $_as astest.S -o astest.o > /dev/null 2>&1 || as_verc_fail=yes

cat > $TMPS <<EOF
nop
EOF

if [ $_mmx = 'yes' ]; then
cat >> $TMPS <<EOF
emms
EOF
fi

if [ $_3dnow = 'yes' ]; then
_pref_as_version='2.10.1'
cat >> $TMPS <<EOF
femms
EOF
fi

if [ $_3dnowex = 'yes' ]; then
_pref_as_version='2.10.1'
cat >> $TMPS <<EOF
pswapd %mm0, %mm0
EOF
fi

if [ $_mmx2 = 'yes' ]; then
_pref_as_version='2.10.1'
cat >> $TMPS <<EOF
movntq	%mm0, (%eax)
EOF
fi

if [ $_sse = 'yes' ]; then
_pref_as_version='2.10.1'
cat >> $TMPS <<EOF
xorps %xmm0, %xmm0
EOF
fi
# Note: for SSE2 assembler v2.11 should be preferred --Nick
#if [ $_sse2 = 'yes' ]; then
#_pref_as_version='2.11'
#cat >> $TMPS <<EOF
#xorpd %xmm0, %xmm0
#EOF
#fi
$_as $TMPS -o $TMPO > /dev/null 2>&1 || as_verc_fail=yes
rm -f $TMPS $TMPO $TMPC

if test "$as_verc_fail" != "yes"; then
  echo "ok"
else
  echo "failed"
  echo "Please upgrade(downgrade) binutils to "$_pref_as_version"..."
  if [ $_skip_as_check = 'no' ]; then
    exit
  else
    echo "YOU'VE SELECTED '--disable-as-checking'. PLEASE DON'T SEND US ANY BUGREPORTS!"
  fi
fi

# Checking kernel version...
_k_verc_problem=no
system_name=`uname -s 2>&1`
kernel_version=`uname -r 2>&1`
echo $_echo_n "Checking $system_name kernel version ... $_echo_c"
case $kernel_version in
    '') kernel_version="?.??"; _k_verc_fail=yes;;
    [0-1].[0-99].[0-99]|2.[0-3].[0-99])
	_k_verc_problem=yes;;
esac
if [ $_k_verc_problem = 'yes' ] && [ $_sse = 'yes' ]; then
_k_verc_fail=yes
fi
if [ ! -z "$_k_verc_fail" ]; then
echo "$kernel_version, fail"
echo "WARNING! You want to run mplayer on this system then be prepared for problems"
else
echo "$kernel_version, ok"
fi

if [ $_x11 = 'yes' ]; then
 if [ $_mga = 'yes' ]; then
  _xmga=yes
 fi
fi

# to screen.
echo "Install prefix: $_prefix"
echo "Checking for cpu vendor ... $pvendor ( $pfamily:$pmodel:$pstepping )"
echo "Checking for cpu type ... $pname"
echo "Optimizing to ... $proc"
echo "Checking for mmx support ... $_mmx"
echo "Checking for mmx2 support ... $_mmx2"
echo "Checking for 3dnow support ... $_3dnow"
echo "Checking for 3dnowex support ... $_3dnowex"
echo "Checking for sse support ... $_sse"
echo "Checking for mtrr support ... $_mtrr"
echo "Screen size ... ${_x}x${_y}"
echo "Checking for X11 libs ... $_x11libdir"
echo "Checking mga_vid device ... $_mga"
echo "Checking for xmga ... $_xmga" 
echo "Checking for SDL ... $_sdl"
echo "Checking for OpenGL ... $_gl"
echo "Checking for Xv ... $_xv"
echo "Checking for X11 ... $_x11"
echo "Checking for DGA ... $_dga"
echo "Checking for DGA 2.0 .. $_dga2"
echo "Checking for Xf86VM ... $_vm"
echo "Checking for SVGAlib ... $_svga"
echo "Checking for FBDev ... $_fbdev"
echo "Checking for OSS Audio ... $_oss_audio"
echo "Checking for ALSA Audio ... $_alsaver"
echo "Checking for ESD Audio ... $_esd"
echo "Checking for Sun Audio ... $_sun_audio"
echo "Checking for DeCSS support ... $_css"
echo "Checking for PNG support ... $_png"
echo "Checking for DirectShow ... $_dshow"
echo "Checking for fastmemcpy ... $_fastmemcpy"
# write conf files.

_streamingdef='#undef STREAMING'
if [ $_streaming = yes ]; then
   _streamingsrcs='asf_streaming.c network.c url.c http.c'
   _streamingdef='#define STREAMING'
fi

if [ $_gl = yes ]; then
   _gllib='-lGL'
fi

if [ $_css = yes ]; then
   if [ ! -z "$_csslibdir" ]; then
     _csslib="-L${_csslibdir} -lcss"
   else
     _csslib='-lcss'
   fi
   _css='#define HAVE_LIBCSS'
   if [ ! -z "$_cssincdir" ]; then
     _cssinc="-I${_cssincdir}"
   else
     _cssinc=""
   fi
else
   _css='#undef HAVE_LIBCSS'
   _csslib=''
   _cssinc=''
fi

if [ $_dshow = yes ]; then
   _dshowlib='-Lloader/DirectShow -lDS_Filter -lstdc++'
   _dshowdep='loader/DirectShow/libDS_Filter.a'
   _dshow='#define USE_DIRECTSHOW'
else
   _dshowlib=''
   _dshowdep=''
   _dshow='#undef USE_DIRECTSHOW'
fi

if [ $_fastmemcpy = yes ]; then
   _fastmemcpy='#define USE_FASTMEMCPY'
else
   _fastmemcpy='#undef USE_FASTMEMCPY'
fi

if [ $_x11 = yes ]; then
  if [ $_xdpms = yes ]; then
    _x11lib='-lX11 -lXext -lXdpms'
  else
    _x11lib='-lX11 -lXext'
  fi
fi

if [ $_xv = yes ]; then
  _xvlib='-lXv'
fi

if [ $_sdl = yes ]; then
  _sdllib=`$_sdlconfig --libs` 
  _sdlcflags=`$_sdlconfig --cflags` 
fi

if [ $_dga = yes ]; then
  _dgalib='-lXxf86dga'
fi

if [ $_svga = yes ]; then
  _svgalib='-lvgagl -lvga'
fi

if [ $_vm = yes ]; then
  _vmlib='-lXxf86vm'
fi

if [ "$_termcap" = "yes" ]; then
 _termcap='#define USE_TERMCAP'
 _libtermcap='-ltermcap'
else
 _termcap='#undef USE_TERMCAP'
 _libtermcap=''
fi

if [ "$_xmmp" = "yes" ]; then
 _xmmpaudio='#define USE_XMMP_AUDIO'
 _xmmplibs='-Llibxmm -lxmm'
else
 _xmmpaudio='#undef USE_XMMP_AUDIO'
fi

if [ "$_lirc" = "yes" ]; then
 _lircdefs='#define HAVE_LIRC'
 _lirclibs='-llirc_client'
else
 _lircdefs='#undef HAVE_LIRC'
 _lirclibs=''
fi

if [ $_png = yes ]; then
   _libpng='-lpng -lz'
fi

_aosrc=''

_alsa5='#undef HAVE_ALSA5'
_alsa9='#undef HAVE_ALSA9'
if [ $_alsa = 'yes' ]; then
 [ $_alsaver = '0.5.x' ] && { _aosrc="$_aosrc ao_alsa5.c"; _alsa5='#define HAVE_ALSA5'; _alsalib='-lasound'; }
 # [ $_alsaver = '0.9.x' ] && { _aosrc="$_aosrc ao_alsa9.c"; _alsa9='#define HAVE_ALSA9'; _alsalib='-lasound'; }
fi
  
_esdd='#undef HAVE_ESD'
#if [ $_esd = 'yes' ]; then
# _esdd='#define HAVE_ESD'
# _aosrc="$_aosrc ao_esd.c"
# _esdlib='-lesd'
#fi

if [ "$_oss_audio" = "yes" ]; then
 _ossaudio='#define USE_OSS_AUDIO'
 _aosrc="$_aosrc ao_oss.c"
else
 _ossaudio='#undef USE_OSS_AUDIO'
fi

if [ "$_sun_audio" = "yes" ]; then
 _sunaudio='#define USE_SUN_AUDIO'
 _aosrc="$_aosrc ao_sun.c"
else
 _sunaudio='#undef USE_SUN_AUDIO'
fi

if [ "$_sys_soundcard_h" = "yes" ]; then
 _have_soundcard_h='#define HAVE_SYS_SOUNDCARD_H 1'
else
 _have_soundcard_h='#undef  HAVE_SYS_SOUNDCARD_H'
fi


# Checking for CFLAGS
if [ "$_profile" != "" ] || [ "$_debug" != "" ]; then
 CFLAGS="-W -Wall -O2 -march=$proc -mcpu=$proc $_debug $_profile"
else
if test -z "$CFLAGS"; then
 CFLAGS="-O4 -march=$proc -mcpu=$proc -pipe -ffast-math -fomit-frame-pointer"
fi
fi
echo
echo "Creating $MCONF"
cat > $MCONF << EOF

# -------- Generated by ./configure -----------

AR=ar
CC=$_cc
X11DIR=$_x11libdir
# OPTFLAGS=-O4 $_profile $_debug -march=$proc -mcpu=$proc -pipe -fomit-frame-pointer -ffast-math
OPTFLAGS=$CFLAGS
# LIBS=-L/usr/lib -L/usr/local/lib $_x11libdir $_gllib $_sdllib $_dgalib $_x11lib $_xvlib
X_LIBS=$_x11libdir $_gllib $_sdllib $_dgalib $_x11lib $_xvlib $_vmlib $_svgalib $_libpng $_socklib
TERMCAP_LIB=$_libtermcap
XMM_LIBS = $_xmmplibs
LIRC_LIBS = $_lirclibs
CSS_LIB = $_csslib
CSS_INC = $_cssinc
SDL_LIB = $_sdllib
SDL_INC = $_sdlcflags
WIN32_PATH=-DWIN32_PATH=\"$_win32libdir\"
DS_DEP = $_dshowdep
DS_LIB = $_dshowlib
ALSA_LIB = $_alsalib
ESD_LIB = $_esdlib
prefix = $_prefix
ARCH_LIBS = -ldl -lpthread
STREAM_SRCS = $_streamingsrcs

EOF
# echo 'CFLAGS=$(OPTFLAGS) -Wall -DMPG12PLAY' >> config.mak

echo "Creating $CCONF"

if [ "$_mmx" = "yes" ]; then
 _mmx='#define HAVE_MMX'
else
 _mmx='#undef HAVE_MMX'
fi

if [ "$_mmx2" = "yes" ]; then
 _mmx2='#define HAVE_MMX2'
else
 _mmx2='#undef HAVE_MMX2'
fi

if [ $_3dnow = yes ]; then
 _3dnowm='#define HAVE_3DNOW'
else
 _3dnowm='#undef HAVE_3DNOW'
fi

if [ $_3dnowex = yes ]; then
 _3dnowexm='#define HAVE_3DNOWEX'
else
 _3dnowexm='#undef HAVE_3DNOWEX'
fi

if [ $_sse = yes ]; then
 _ssem='#define HAVE_SSE'
else
 _ssem='#undef HAVE_SSE'
fi

# ---

_vosrc=''
#_aosrc=''

if [ $_png = yes ]; then
 _png='#define HAVE_PNG'
 _vosrc=$_vosrc' vo_png.c'
else
   _png='#undef HAVE_PNG'
fi


if [ $_mlib = yes ]; then
 _mlib='#define HAVE_MLIB'
 _vosrc=$_vosrc' yuv2rgb_mlib.c'
else
 _mlib='#undef HAVE_MLIB'
fi

# ---

if [ $_gl = yes ]; then
 _gl='#define HAVE_GL'
 _vosrc=$_vosrc' vo_gl.c'
else
 _gl='#undef HAVE_GL'
fi

if [ $_sdl = yes ]; then
 _sdldef='#define HAVE_SDL'
 _vosrc=$_vosrc' vo_sdl.c'
 _aosrc=$_aosrc' ao_sdl.c'
else
 _sdldef='#undef HAVE_SDL'
fi

if [ $_x11 = yes ]; then
 _x11='#define HAVE_X11'
 _vosrc=$_vosrc' vo_x11.c'
else
 _x11='#undef HAVE_X11'
fi

if [ $_xv = yes ]; then
 _xv='#define HAVE_XV'
 _vosrc=$_vosrc' vo_xv.c'
else
 _xv='#undef HAVE_XV'
fi

if [ $_vm = yes ]; then
 _vm='#define HAVE_XF86VM'
else
 _vm='#undef HAVE_XF86VM'
fi

# ---

if [ $_mga = yes ]; then
 _mga='#define HAVE_MGA'
 _vosrc=$_vosrc' vo_mga.c'
else
 _mga='#undef HAVE_MGA'
fi
if [ $_xmga = yes ]; then
 _vosrc=$_vosrc' vo_xmga.c'
fi

if [ $_syncfb = yes ]; then
 _syncfb='#define HAVE_SYNCFB'
 _vosrc=$_vosrc' vo_syncfb.c'
else
 _syncfb='#undef HAVE_SYNCFB'
fi

if [ $_3dfx = yes ]; then
 _3dfx='#define HAVE_3DFX'
 _vosrc=$_vosrc' vo_3dfx.c'
else
 _3dfx='#undef HAVE_3DFX'
fi

if [ $_svga = yes ]; then
 _svga='#define HAVE_SVGALIB'
 _vosrc=$_vosrc' vo_svga.c'
else
 _svga='#undef HAVE_SVGALIB'
fi

if [ $_dga = yes ]; then
 _dga='#define HAVE_DGA'
 _vosrc=$_vosrc' vo_dga.c vo_fsdga.c'
else
 _dga='#undef HAVE_DGA'
fi

if [ $_dga2 = yes ]; then
 _dga2='#define HAVE_DGA2'
 _vosrc=$_vosrc' vo_dga.c vo_fsdga.c'
else
 _dga2='#undef HAVE_DGA2'
fi

if [ $_fbdev = yes ]; then
 _fbdev='#define HAVE_FBDEV'
 _vosrc=$_vosrc' vo_fbdev.c'
else
 _fbdev='#undef HAVE_FBDEV'
fi

if [ $_mpg123 = yes ]; then
 _mpg123='#define DEFAULT_MPG123'
else
 _mpg123='#undef DEFAULT_MPG123'
fi

if [ $_gui = yes ]; then
 _gui='#define HAVE_GUI'
else
 _gui='#undef HAVE_GUI'
fi

   
cat > $CCONF << EOF

/* -------- Generated by ./configure ----------- */

/* Define this to enable avg. byte/sec-based AVI sync method by default:
   (use -bps or -nobps commandline option for run-time method selection)    */
#undef AVI_SYNC_BPS

/* Undefine this if you want soundcard-only timing by default:
   You can still change this with the -alsa or -noalsa command-line option!
   (This function was originally impemented to solve ALSA driver's big
   buffer problems, but it seems to be useful for every soundcard drivers) */
#define ALSA_TIMER

/* Undefine this if you don't want to select mono audio (left or right)
   with a stereo MPEG layer 2/3 audio stream. The command-line option
   -stereo has three possible values (0 for stereo, 1 for left-only, 2 for
   right-only), with 0 being the default.
   */
#define USE_FAKE_MONO

/* Undefine this if your soundcard driver has no working select().
   If you have kernel Oops, player hangups, or just no audio, you should
   try to recompile MPlayer with this option disabled! */
$_select

/* You have a choice for MP3 decoding: mp3lib(mpg123) or Win32(l3codeca.acm)
   #define this if you prefer mpg123 (with 3Dnow! support) than l3codeca.acm
   (with mmx/sse optimizations)
   You can still change it runtime using -afm 1 (mpg123) or -afm 4 (l3codeca)*/
$_mpg123


/* XMMP support: (test code) */
$_xmmpaudio
#define LIBDIR "/usr/local/lib"
#define PLUGINDIR LIBDIR "/xmmp/Plugins"
#define XMMP_AUDIO_DRIVER PLUGINDIR "/Sound/oss.so"

/* set up max. outburst. use 65536 for ALSA 0.5, for others 16384 is enough */
#define MAX_OUTBURST 65536

/* set up audio OUTBURST. Do not change this! */
#ifdef USE_XMMP_AUDIO
#define OUTBURST 4096
#else
//#define OUTBURST 1024
#define OUTBURST 512
#endif

/* Define this if your system has the header file for the OSS sound interface */
$_have_soundcard_h


/* LIRC (remote control, see www.lirc.org) support: */
$_lircdefs

/* DeCSS support using libcss */
$_css

/* Define this to enable MPEG 1/2 image postprocessing (requires FAST cpu!) */
#define MPEG12_POSTPROC

/* DirectShow support */
$_dshow

/* Use 3dnow/mmxext/sse/mmx optimized fast memcpy() [maybe buggy... signal 4]*/
$_fastmemcpy

/* gui support, please do not edit this option */
$_gui
#define PREFIX "$_prefix"

/* Audio lib drivers */
$_ossaudio
$_alsa5
$_alsa9
$_esdd
$_sunaudio

/* Enable fast OSD/SUB renderer (looks ugly, but uses less CPU power) */
#undef FAST_OSD
#undef FAST_OSD_TABLE

/* Define if your processor stores words with the most significant
   byte first (like Motorola and SPARC, unlike Intel and VAX).  */
/* #define WORDS_BIGENDIAN */

#define ARCH_X86

/* Define this to any prefered value from 386 up to infinity with step 100 */
#define __CPU__ $iproc

/*----------------------------------------------------------------------------
**
** NOTE: Instead of modifying these definitions here, use the
**       --enable/--disable options of the ./configure script!
**       See ./configure --help for details.
**
*---------------------------------------------------------------------------*/

/* termcap flag for getch2.c */
$_termcap

$_png

$_streamingdef

/* Extension defines */
$_mlib     // available only on solaris
$_3dnowm   // only define if you have 3DNOW (AMD k6-2, AMD Athlon, iDT WinChip, etc.)
$_3dnowexm // only define if you have 3DNOWEX (AMD Athlon, etc.)
$_mmx      // only define if you have MMX
$_mmx2     // only define if you have MMX2
$_ssem     // only define if you have SSE (Intel Pentium III or Celeron II)

/* libvo options */
#define SCREEN_SIZE_X $_x
#define SCREEN_SIZE_Y $_y
$_x11
$_xv
$_vm
$_gl
$_dga
$_dga2
$_sdldef
/* defined for SDLlib with keyrepeat bugs (before 1.2.1) */
$_sdlbuggy
$_3dfx
$_mga
$_syncfb
$_fbdev
$_svga

#if defined(HAVE_GL)||defined(HAVE_X11)||defined(HAVE_XV)
#define X11_FULLSCREEN
#endif

EOF

echo "Creating libvo/config.mak"

_voobj=`echo $_vosrc | sed -e 's/\.c/\.o/g'`

cat > libvo/config.mak << EOF

include ../config.mak

OPTIONAL_SRCS=$_vosrc
OPTIONAL_OBJS=$_voobj

EOF

echo "Creating libao2/config.mak"

_aoobj=`echo $_aosrc | sed -e 's/\.c/\.o/g'`

cat > libao2/config.mak << EOF

include ../config.mak

OPTIONAL_SRCS=$_aosrc
OPTIONAL_OBJS=$_aoobj

EOF

echo "Creating libac3/config.mak"

if [ $_sse = yes ]; then
 _downmixc='downmix/downmix_kni.S'
 _downmixo='downmix/downmix_kni.o'
else
if [ $_3dnow = yes ]; then
 _downmixc='downmix/downmix_3dnow.S'
 _downmixo='downmix/downmix_3dnow.o'
else
if [ $_binutils = yes ]; then
 _downmixc='downmix/downmix_i386.S'
 _downmixo='downmix/downmix_i386.o'
else
_downmixc='downmix/downmix.c'
_downmixo='downmix/downmix.o'
cat << EOF

!!! Warning! fallback to slow downmix.c due the old binutils.
!!! Upgrade it for better AC3 audio decoding performance!

EOF
fi
fi
fi
cat > libac3/config.mak << EOF

include ../config.mak

OPTIONAL_SRCS    = $_downmixc
OPTIONAL_OBJS    = $_downmixo

EOF

echo "Creating mp3lib/config.mak"

if [ $_3dnowex = yes ]; then
 _mp3libobjectsrcs='dct36_k7.s dct64_k7.s decode_k7.s dct36_3dnow.s dct64_3dnow.s decode_3dnow.s'
 _mp3libobjectobjs='dct36_k7.o dct64_k7.o decode_k7.o dct36_3dnow.o dct64_3dnow.o decode_3dnow.o'
else
if [ $_3dnow = yes ]; then
 _mp3libobjectsrcs='dct36_3dnow.s dct64_3dnow.s decode_3dnow.s'
 _mp3libobjectobjs='dct36_3dnow.o dct64_3dnow.o decode_3dnow.o'
else
if [ $_sse = yes ]; then
 _mp3libobjectsrcs='decode_sse.s'
 _mp3libobjectobjs='decode_sse.o'
else
 _mp3libobjectsrcs=
 _mp3libobjectobjs=
fi
fi
fi

cat > mp3lib/config.mak << EOF

include ../config.mak

OPTIONAL_SRCS = $_mp3libobjectsrcs
OPTIONAL_OBJS = $_mp3libobjectobjs

EOF

cat << EOF

Config files successfully generated by ./configure !
Please check config.h and config.mak files, tune CPU
and optimization flags if you don't like these defaults.
You can compile the program with 'make' and
install with  'make install'. Good luck!

EOF

if [ $_mtrr = yes ]; then
 echo "Please check mtrr settings at /proc/mtrr (see DOCS/MTRR)"
 echo
fi

if [ $_sdl = outdated ]; then
 echo "You have libSDL installed, but your version is outdated (earlier then"
 echo "v.1.1.7), SDL support has been disabled please update, if you want to"
 echo "use it (libSDL v1.1.8 and v1.2.0/1 are tested and known to work, recent"
 echo "versions are available from http://www.libsdl.org/)."
 echo "After updating you need to re-run ./configure and recompile to enable SDL."
 echo "(If you only want to use SDLlib audio driver older versions might work, you"
 echo "can use --enable-sdl to force using SDLlib)"
 echo
fi

if [ $_win32libdirnotify = yes ]; then
 echo "Missing WIN32 codecs dir at $_win32libdir !"
 echo "Make it and copy DLL files to there! (You can get them from your windows"
 echo "directory or download ftp://thot.banki.hu/esp-team/linux/MPlayer/w32codec.zip"
else
 echo "Ok, Win32 codecs directory at $_win32libdir already exists."
fi

# Last move:

rm -f $TMPO $TMPC $TMPS