Mercurial > mplayer.hg
view drivers/mga_vid.c @ 1493:ba230d9b252a
*** empty log message ***
author | gabucino |
---|---|
date | Sun, 12 Aug 2001 08:00:10 +0000 |
parents | 76ca00724e12 |
children | bddeddc2cf42 |
line wrap: on
line source
// YUY2 support (see config.format) added by A'rpi/ESP-team // double buffering added by A'rpi/ESP-team // Set this value, if autodetection fails! (video ram size in megabytes) // #define MGA_MEMORY_SIZE 16 //#define MGA_ALLOW_IRQ #define MGA_VSYNC_POS 2 /* * * mga_vid.c * * Copyright (C) 1999 Aaron Holtzman * * Module skeleton based on gutted agpgart module by Jeff Hartmann * <slicer@ionet.net> * * Matrox MGA G200/G400 YUV Video Interface module Version 0.1.0 * * BES == Back End Scaler * * This software has been released under the terms of the GNU Public * license. See http://www.gnu.org/copyleft/gpl.html for details. */ //It's entirely possible this major conflicts with something else /* mknod /dev/mga_vid c 178 0 */ #include <linux/config.h> #include <linux/version.h> #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/malloc.h> #include <linux/pci.h> #include <linux/ioport.h> #include <linux/init.h> #include "mga_vid.h" #ifdef CONFIG_MTRR #include <asm/mtrr.h> #endif #include <asm/uaccess.h> #include <asm/system.h> #include <asm/io.h> #define TRUE 1 #define FALSE 0 #define MGA_VID_MAJOR 178 //#define MGA_VIDMEM_SIZE mga_ram_size #ifndef PCI_DEVICE_ID_MATROX_G200_PCI #define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520 #endif #ifndef PCI_DEVICE_ID_MATROX_G200_AGP #define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521 #endif #ifndef PCI_DEVICE_ID_MATROX_G400 #define PCI_DEVICE_ID_MATROX_G400 0x0525 #endif MODULE_AUTHOR("Aaron Holtzman <aholtzma@engr.uvic.ca>"); typedef struct bes_registers_s { //BES Control uint32_t besctl; //BES Global control uint32_t besglobctl; //Luma control (brightness and contrast) uint32_t beslumactl; //Line pitch uint32_t bespitch; //Buffer A-1 Chroma 3 plane org uint32_t besa1c3org; //Buffer A-1 Chroma org uint32_t besa1corg; //Buffer A-1 Luma org uint32_t besa1org; //Buffer A-2 Chroma 3 plane org uint32_t besa2c3org; //Buffer A-2 Chroma org uint32_t besa2corg; //Buffer A-2 Luma org uint32_t besa2org; //Buffer B-1 Chroma 3 plane org uint32_t besb1c3org; //Buffer B-1 Chroma org uint32_t besb1corg; //Buffer B-1 Luma org uint32_t besb1org; //Buffer B-2 Chroma 3 plane org uint32_t besb2c3org; //Buffer B-2 Chroma org uint32_t besb2corg; //Buffer B-2 Luma org uint32_t besb2org; //BES Horizontal coord uint32_t beshcoord; //BES Horizontal inverse scaling [5.14] uint32_t beshiscal; //BES Horizontal source start [10.14] (for scaling) uint32_t beshsrcst; //BES Horizontal source ending [10.14] (for scaling) uint32_t beshsrcend; //BES Horizontal source last uint32_t beshsrclst; //BES Vertical coord uint32_t besvcoord; //BES Vertical inverse scaling [5.14] uint32_t besviscal; //BES Field 1 vertical source last position uint32_t besv1srclst; //BES Field 1 weight start uint32_t besv1wght; //BES Field 2 vertical source last position uint32_t besv2srclst; //BES Field 2 weight start uint32_t besv2wght; } bes_registers_t; static bes_registers_t regs; static uint32_t mga_vid_in_use = 0; static uint32_t is_g400 = 0; static uint32_t vid_src_ready = 0; static uint32_t vid_overlay_on = 0; static uint8_t *mga_mmio_base = 0; static uint32_t mga_mem_base = 0; static int mga_src_base = 0; // YUV buffer position in video memory static uint32_t mga_ram_size = 0; // how much megabytes videoram we have //static int mga_force_memsize = 0; MODULE_PARM(mga_ram_size, "i"); static struct pci_dev *pci_dev; static mga_vid_config_t mga_config; static int mga_irq = -1; //All register offsets are converted to word aligned offsets (32 bit) //because we want all our register accesses to be 32 bits #define VCOUNT 0x1e20 #define PALWTADD 0x3c00 // Index register for X_DATAREG port #define X_DATAREG 0x3c0a #define XMULCTRL 0x19 #define BPP_8 0x00 #define BPP_15 0x01 #define BPP_16 0x02 #define BPP_24 0x03 #define BPP_32_DIR 0x04 #define BPP_32_PAL 0x07 #define XCOLMSK 0x40 #define X_COLKEY 0x42 #define XKEYOPMODE 0x51 #define XCOLMSK0RED 0x52 #define XCOLMSK0GREEN 0x53 #define XCOLMSK0BLUE 0x54 #define XCOLKEY0RED 0x55 #define XCOLKEY0GREEN 0x56 #define XCOLKEY0BLUE 0x57 // Backend Scaler registers #define BESCTL 0x3d20 #define BESGLOBCTL 0x3dc0 #define BESLUMACTL 0x3d40 #define BESPITCH 0x3d24 #define BESA1C3ORG 0x3d60 #define BESA1CORG 0x3d10 #define BESA1ORG 0x3d00 #define BESA2C3ORG 0x3d64 #define BESA2CORG 0x3d14 #define BESA2ORG 0x3d04 #define BESB1C3ORG 0x3d68 #define BESB1CORG 0x3d18 #define BESB1ORG 0x3d08 #define BESB2C3ORG 0x3d6C #define BESB2CORG 0x3d1C #define BESB2ORG 0x3d0C #define BESHCOORD 0x3d28 #define BESHISCAL 0x3d30 #define BESHSRCEND 0x3d3C #define BESHSRCLST 0x3d50 #define BESHSRCST 0x3d38 #define BESV1WGHT 0x3d48 #define BESV2WGHT 0x3d4c #define BESV1SRCLST 0x3d54 #define BESV2SRCLST 0x3d58 #define BESVISCAL 0x3d34 #define BESVCOORD 0x3d2c #define BESSTATUS 0x3dc4 #define CRTCX 0x1fd4 #define CRTCD 0x1fd5 #define IEN 0x1e1c #define ICLEAR 0x1e18 #define STATUS 0x1e14 static int mga_next_frame=0; static void mga_vid_frame_sel(int frame) { if ( mga_irq != -1 ) { mga_next_frame=frame; } else { //we don't need the vcount protection as we're only hitting //one register (and it doesn't seem to be double buffered) regs.besctl = (regs.besctl & ~0x07000000) + (frame << 25); writel( regs.besctl, mga_mmio_base + BESCTL ); // writel( regs.besglobctl + ((readl(mga_mmio_base + VCOUNT)+2)<<16), writel( regs.besglobctl + (MGA_VSYNC_POS<<16), mga_mmio_base + BESGLOBCTL); } } static void mga_vid_write_regs(void) { //Make sure internal registers don't get updated until we're done writel( (readl(mga_mmio_base + VCOUNT)-1)<<16, mga_mmio_base + BESGLOBCTL); // color or coordinate keying writeb( XKEYOPMODE, mga_mmio_base + PALWTADD); writeb( mga_config.colkey_on, mga_mmio_base + X_DATAREG); if ( mga_config.colkey_on ) { uint32_t r=0, g=0, b=0; writeb( XMULCTRL, mga_mmio_base + PALWTADD); switch (readb (mga_mmio_base + X_DATAREG)) { case BPP_8: /* Need to look up the color index, just using color 0 for now. */ break; case BPP_15: r = mga_config.colkey_red >> 3; g = mga_config.colkey_green >> 3; b = mga_config.colkey_blue >> 3; break; case BPP_16: r = mga_config.colkey_red >> 3; g = mga_config.colkey_green >> 2; b = mga_config.colkey_blue >> 3; break; case BPP_24: case BPP_32_DIR: case BPP_32_PAL: r = mga_config.colkey_red; g = mga_config.colkey_green; b = mga_config.colkey_blue; break; } // Disable color keying on alpha channel writeb( XCOLMSK, mga_mmio_base + PALWTADD); writeb( 0x00, mga_mmio_base + X_DATAREG); writeb( X_COLKEY, mga_mmio_base + PALWTADD); writeb( 0x00, mga_mmio_base + X_DATAREG); // Set up color key registers writeb( XCOLKEY0RED, mga_mmio_base + PALWTADD); writeb( r, mga_mmio_base + X_DATAREG); writeb( XCOLKEY0GREEN, mga_mmio_base + PALWTADD); writeb( g, mga_mmio_base + X_DATAREG); writeb( XCOLKEY0BLUE, mga_mmio_base + PALWTADD); writeb( b, mga_mmio_base + X_DATAREG); // Set up color key mask registers writeb( XCOLMSK0RED, mga_mmio_base + PALWTADD); writeb( 0xff, mga_mmio_base + X_DATAREG); writeb( XCOLMSK0GREEN, mga_mmio_base + PALWTADD); writeb( 0xff, mga_mmio_base + X_DATAREG); writeb( XCOLMSK0BLUE, mga_mmio_base + PALWTADD); writeb( 0xff, mga_mmio_base + X_DATAREG); } // Backend Scaler writel( regs.besctl, mga_mmio_base + BESCTL); if(is_g400) writel( regs.beslumactl, mga_mmio_base + BESLUMACTL); writel( regs.bespitch, mga_mmio_base + BESPITCH); writel( regs.besa1org, mga_mmio_base + BESA1ORG); writel( regs.besa1corg, mga_mmio_base + BESA1CORG); writel( regs.besa2org, mga_mmio_base + BESA2ORG); writel( regs.besa2corg, mga_mmio_base + BESA2CORG); writel( regs.besb1org, mga_mmio_base + BESB1ORG); writel( regs.besb1corg, mga_mmio_base + BESB1CORG); writel( regs.besb2org, mga_mmio_base + BESB2ORG); writel( regs.besb2corg, mga_mmio_base + BESB2CORG); if(is_g400) { writel( regs.besa1c3org, mga_mmio_base + BESA1C3ORG); writel( regs.besa2c3org, mga_mmio_base + BESA2C3ORG); writel( regs.besb1c3org, mga_mmio_base + BESB1C3ORG); writel( regs.besb2c3org, mga_mmio_base + BESB2C3ORG); } writel( regs.beshcoord, mga_mmio_base + BESHCOORD); writel( regs.beshiscal, mga_mmio_base + BESHISCAL); writel( regs.beshsrcst, mga_mmio_base + BESHSRCST); writel( regs.beshsrcend, mga_mmio_base + BESHSRCEND); writel( regs.beshsrclst, mga_mmio_base + BESHSRCLST); writel( regs.besvcoord, mga_mmio_base + BESVCOORD); writel( regs.besviscal, mga_mmio_base + BESVISCAL); writel( regs.besv1srclst, mga_mmio_base + BESV1SRCLST); writel( regs.besv1wght, mga_mmio_base + BESV1WGHT); writel( regs.besv2srclst, mga_mmio_base + BESV2SRCLST); writel( regs.besv2wght, mga_mmio_base + BESV2WGHT); //update the registers somewhere between 1 and 2 frames from now. writel( regs.besglobctl + ((readl(mga_mmio_base + VCOUNT)+2)<<16), mga_mmio_base + BESGLOBCTL); #if 0 printk(KERN_DEBUG "mga_vid: wrote BES registers\n"); printk(KERN_DEBUG "mga_vid: BESCTL = 0x%08x\n", readl(mga_mmio_base + BESCTL)); printk(KERN_DEBUG "mga_vid: BESGLOBCTL = 0x%08x\n", readl(mga_mmio_base + BESGLOBCTL)); printk(KERN_DEBUG "mga_vid: BESSTATUS= 0x%08x\n", readl(mga_mmio_base + BESSTATUS)); #endif } static int mga_vid_set_config(mga_vid_config_t *config) { int x, y, sw, sh, dw, dh; int besleft, bestop, ifactor, ofsleft, ofstop, baseadrofs, weight, weights; int frame_size=config->frame_size; x = config->x_org; y = config->y_org; sw = config->src_width; sh = config->src_height; dw = config->dest_width; dh = config->dest_height; printk(KERN_DEBUG "mga_vid: Setting up a %dx%d+%d+%d video window (src %dx%d) format %X\n", dw, dh, x, y, sw, sh, config->format); //FIXME check that window is valid and inside desktop //FIXME figure out a better way to allocate memory on card //allocate 2 megs //mga_src_base = mga_mem_base + (MGA_VIDMEM_SIZE-2) * 0x100000; //mga_src_base = (MGA_VIDMEM_SIZE-3) * 0x100000; //Setup the BES registers for a three plane 4:2:0 video source regs.besglobctl = 0; switch(config->format){ case MGA_VID_FORMAT_YV12: case MGA_VID_FORMAT_I420: case MGA_VID_FORMAT_IYUV: regs.besctl = 1 // BES enabled + (0<<6) // even start polarity + (1<<10) // x filtering enabled + (1<<11) // y filtering enabled + (1<<16) // chroma upsampling + (1<<17) // 4:2:0 mode + (1<<18); // dither enabled #if 0 if(is_g400) { //zoom disabled, zoom filter disabled, 420 3 plane format, proc amp //disabled, rgb mode disabled regs.besglobctl = (1<<5); } else { //zoom disabled, zoom filter disabled, Cb samples in 0246, Cr //in 1357, BES register update on besvcnt regs.besglobctl = 0; } #endif break; case MGA_VID_FORMAT_YUY2: regs.besctl = 1 // BES enabled + (0<<6) // even start polarity + (1<<10) // x filtering enabled + (1<<11) // y filtering enabled + (1<<16) // chroma upsampling + (0<<17) // 4:2:2 mode + (1<<18); // dither enabled regs.besglobctl = 0; // YUY2 format selected break; case MGA_VID_FORMAT_UYVY: regs.besctl = 1 // BES enabled + (0<<6) // even start polarity + (1<<10) // x filtering enabled + (1<<11) // y filtering enabled + (1<<16) // chroma upsampling + (0<<17) // 4:2:2 mode + (1<<18); // dither enabled regs.besglobctl = 1<<6; // UYVY format selected break; default: printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format); return -1; } //Disable contrast and brightness control regs.besglobctl |= (1<<5) + (1<<7); regs.beslumactl = (0x7f << 16) + (0x80<<0); regs.beslumactl = 0x80<<0; //Setup destination window boundaries besleft = x > 0 ? x : 0; bestop = y > 0 ? y : 0; regs.beshcoord = (besleft<<16) + (x + dw-1); regs.besvcoord = (bestop<<16) + (y + dh-1); //Setup source dimensions regs.beshsrclst = (sw - 1) << 16; regs.bespitch = (sw + 31) & ~31 ; //Setup horizontal scaling ifactor = ((sw-1)<<14)/(dw-1); ofsleft = besleft - x; regs.beshiscal = ifactor<<2; regs.beshsrcst = (ofsleft*ifactor)<<2; regs.beshsrcend = regs.beshsrcst + (((dw - ofsleft - 1) * ifactor) << 2); //Setup vertical scaling ifactor = ((sh-1)<<14)/(dh-1); ofstop = bestop - y; regs.besviscal = ifactor<<2; baseadrofs = ((ofstop*regs.besviscal)>>16)*regs.bespitch; //frame_size = ((sw + 31) & ~31) * sh + (((sw + 31) & ~31) * sh) / 2; regs.besa1org = (uint32_t) mga_src_base + baseadrofs; regs.besa2org = (uint32_t) mga_src_base + baseadrofs + 1*frame_size; regs.besb1org = (uint32_t) mga_src_base + baseadrofs + 2*frame_size; regs.besb2org = (uint32_t) mga_src_base + baseadrofs + 3*frame_size; if(config->format==MGA_VID_FORMAT_YV12 ||config->format==MGA_VID_FORMAT_IYUV ||config->format==MGA_VID_FORMAT_I420 ){ // planar YUV frames: if (is_g400) baseadrofs = (((ofstop*regs.besviscal)/4)>>16)*regs.bespitch; else baseadrofs = (((ofstop*regs.besviscal)/2)>>16)*regs.bespitch; if(config->format==MGA_VID_FORMAT_YV12){ regs.besa1corg = (uint32_t) mga_src_base + baseadrofs + regs.bespitch * sh ; regs.besa2corg = (uint32_t) mga_src_base + baseadrofs + 1*frame_size + regs.bespitch * sh; regs.besb1corg = (uint32_t) mga_src_base + baseadrofs + 2*frame_size + regs.bespitch * sh; regs.besb2corg = (uint32_t) mga_src_base + baseadrofs + 3*frame_size + regs.bespitch * sh; regs.besa1c3org = regs.besa1corg + ((regs.bespitch * sh) / 4); regs.besa2c3org = regs.besa2corg + ((regs.bespitch * sh) / 4); regs.besb1c3org = regs.besb1corg + ((regs.bespitch * sh) / 4); regs.besb2c3org = regs.besb2corg + ((regs.bespitch * sh) / 4); } else { regs.besa1c3org = (uint32_t) mga_src_base + baseadrofs + regs.bespitch * sh ; regs.besa2c3org = (uint32_t) mga_src_base + baseadrofs + 1*frame_size + regs.bespitch * sh; regs.besb1c3org = (uint32_t) mga_src_base + baseadrofs + 2*frame_size + regs.bespitch * sh; regs.besb2c3org = (uint32_t) mga_src_base + baseadrofs + 3*frame_size + regs.bespitch * sh; regs.besa1corg = regs.besa1c3org + ((regs.bespitch * sh) / 4); regs.besa2corg = regs.besa2c3org + ((regs.bespitch * sh) / 4); regs.besb1corg = regs.besb1c3org + ((regs.bespitch * sh) / 4); regs.besb2corg = regs.besb2c3org + ((regs.bespitch * sh) / 4); } } weight = ofstop * (regs.besviscal >> 2); weights = weight < 0 ? 1 : 0; regs.besv2wght = regs.besv1wght = (weights << 16) + ((weight & 0x3FFF) << 2); regs.besv2srclst = regs.besv1srclst = sh - 1 - (((ofstop * regs.besviscal) >> 16) & 0x03FF); mga_vid_write_regs(); return 0; } #ifdef MGA_ALLOW_IRQ static void enable_irq(){ long int cc; cc = readl(mga_mmio_base + IEN); // printk(KERN_ALERT "*** !!! IRQREG = %d\n", (int)(cc&0xff)); writeb( 0x11, mga_mmio_base + CRTCX); writeb(0x20, mga_mmio_base + CRTCD ); /* clear 0, enable off */ writeb(0x00, mga_mmio_base + CRTCD ); /* enable on */ writeb(0x10, mga_mmio_base + CRTCD ); /* clear = 1 */ writel( regs.besglobctl , mga_mmio_base + BESGLOBCTL); } static void disable_irq(){ writeb( 0x11, mga_mmio_base + CRTCX); writeb(0x20, mga_mmio_base + CRTCD ); /* clear 0, enable off */ } void mga_handle_irq(int irq, void *dev_id, struct pt_regs *pregs) { // static int frame=0; // static int counter=0; long int cc; // if ( ! mga_enabled_flag ) return; // printk(KERN_DEBUG "vcount = %d\n",readl(mga_mmio_base + VCOUNT)); //printk("mga_interrupt #%d\n", irq); if ( irq != -1 ) { cc = readl(mga_mmio_base + STATUS); if ( ! (cc & 0x10) ) return; /* vsyncpen */ // debug_irqcnt++; } // if ( debug_irqignore ) { // debug_irqignore = 0; /* if ( mga_conf_deinterlace ) { if ( mga_first_field ) { // printk("mga_interrupt first field\n"); if ( syncfb_interrupt() ) mga_first_field = 0; } else { // printk("mga_interrupt second field\n"); mga_select_buffer( mga_current_field | 2 ); mga_first_field = 1; } } else { syncfb_interrupt(); } */ // frame=(frame+1)&1; regs.besctl = (regs.besctl & ~0x07000000) + (mga_next_frame << 25); writel( regs.besctl, mga_mmio_base + BESCTL ); #if 0 ++counter; if(!(counter&63)){ printk("mga irq counter = %d\n",counter); } #endif // } else { // debug_irqignore = 1; // } if ( irq != -1 ) { writeb( 0x11, mga_mmio_base + CRTCX); writeb( 0, mga_mmio_base + CRTCD ); writeb( 0x10, mga_mmio_base + CRTCD ); } // writel( regs.besglobctl, mga_mmio_base + BESGLOBCTL); return; } #endif static int mga_vid_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { int frame; switch(cmd) { case MGA_VID_CONFIG: //FIXME remove // printk(KERN_DEBUG "vcount = %d\n",readl(mga_mmio_base + VCOUNT)); printk(KERN_DEBUG "mga_mmio_base = %p\n",mga_mmio_base); printk(KERN_DEBUG "mga_mem_base = %08x\n",mga_mem_base); //FIXME remove printk(KERN_DEBUG "mga_vid: Received configuration\n"); if(copy_from_user(&mga_config,(mga_vid_config_t*) arg,sizeof(mga_vid_config_t))) { printk(KERN_ERR "mga_vid: failed copy from userspace\n"); return(-EFAULT); } if(mga_config.version != MGA_VID_VERSION){ printk(KERN_ERR "mga_vid: incompatible version! driver: %X requested: %X\n",MGA_VID_VERSION,mga_config.version); return(-EFAULT); } if(mga_config.frame_size==0 || mga_config.frame_size>1024*768*2){ printk(KERN_ERR "mga_vid: illegal frame_size: %d\n",mga_config.frame_size); return(-EFAULT); } if(mga_config.num_frames<1 || mga_config.num_frames>4){ printk(KERN_ERR "mga_vid: illegal num_frames: %d\n",mga_config.num_frames); return(-EFAULT); } mga_src_base = (mga_ram_size*0x100000-mga_config.num_frames*mga_config.frame_size); if(mga_src_base<0){ printk(KERN_ERR "mga_vid: not enough memory for frames!\n"); return(-EFAULT); } mga_src_base &= (~0xFFFF); // 64k boundary printk(KERN_DEBUG "mga YUV buffer base: 0x%X\n", mga_src_base); if (is_g400) mga_config.card_type = MGA_G400; else mga_config.card_type = MGA_G200; mga_config.ram_size = mga_ram_size; if (copy_to_user((mga_vid_config_t *) arg, &mga_config, sizeof(mga_vid_config_t))) { printk(KERN_ERR "mga_vid: failed copy to userspace\n"); return(-EFAULT); } return mga_vid_set_config(&mga_config); break; case MGA_VID_ON: printk(KERN_DEBUG "mga_vid: Video ON\n"); vid_src_ready = 1; if(vid_overlay_on) { regs.besctl |= 1; mga_vid_write_regs(); } #ifdef MGA_ALLOW_IRQ if ( mga_irq != -1 ) enable_irq(); #endif mga_next_frame=0; break; case MGA_VID_OFF: printk(KERN_DEBUG "mga_vid: Video OFF (ioctl)\n"); vid_src_ready = 0; #ifdef MGA_ALLOW_IRQ if ( mga_irq != -1 ) disable_irq(); #endif regs.besctl &= ~1; regs.besglobctl &= ~(1<<6); // UYVY format selected mga_vid_write_regs(); break; case MGA_VID_FSEL: if(copy_from_user(&frame,(int *) arg,sizeof(int))) { printk(KERN_ERR "mga_vid: FSEL failed copy from userspace\n"); return(-EFAULT); } mga_vid_frame_sel(frame); break; default: printk(KERN_ERR "mga_vid: Invalid ioctl\n"); return (-EINVAL); } return 0; } static int mga_vid_find_card(void) { struct pci_dev *dev = NULL; unsigned int card_option; if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400, NULL))) { is_g400 = 1; printk(KERN_INFO "mga_vid: Found MGA G400/G450\n"); } else if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, NULL))) { is_g400 = 0; printk(KERN_INFO "mga_vid: Found MGA G200 AGP\n"); } else if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI, NULL))) { is_g400 = 0; printk(KERN_INFO "mga_vid: Found MGA G200 PCI\n"); } else { printk(KERN_ERR "mga_vid: No supported cards found\n"); return FALSE; } pci_dev = dev; mga_irq = pci_dev->irq; #if LINUX_VERSION_CODE >= 0x020300 mga_mmio_base = ioremap_nocache(dev->resource[1].start,0x4000); mga_mem_base = dev->resource[0].start; #else mga_mmio_base = ioremap_nocache(dev->base_address[1] & PCI_BASE_ADDRESS_MEM_MASK,0x4000); mga_mem_base = dev->base_address[0] & PCI_BASE_ADDRESS_MEM_MASK; #endif printk(KERN_INFO "mga_vid: MMIO at 0x%p IRQ: %d framebuffer: 0x%08X\n", mga_mmio_base, mga_irq, mga_mem_base); pci_read_config_dword(dev, 0x40, &card_option); printk(KERN_INFO "mga_vid: OPTION word: 0x%08X mem: 0x%02X %s\n", card_option, (card_option>>10)&0x17, ((card_option>>14)&1)?"SGRAM":"SDRAM"); // temp = (card_option >> 10) & 0x17; if (mga_ram_size) { printk(KERN_INFO "mga_vid: RAMSIZE forced to %d MB\n", mga_ram_size); } else { #ifdef MGA_MEMORY_SIZE mga_ram_size = MGA_MEMORY_SIZE; printk(KERN_INFO "mga_vid: hard-coded RAMSIZE is %d MB\n", (unsigned int) mga_ram_size); #else if (is_g400){ switch((card_option>>10)&0x17){ // SDRAM: case 0x00: case 0x04: mga_ram_size = 16; break; case 0x03: mga_ram_size = 32; break; // SGRAM: case 0x10: case 0x14: mga_ram_size = 32; break; case 0x11: case 0x12: mga_ram_size = 16; break; default: mga_ram_size = 16; printk(KERN_INFO "mga_vid: Couldn't detect RAMSIZE, assuming 16MB!"); } }else{ switch((card_option>>10)&0x17){ // case 0x10: // case 0x13: mga_ram_size = 8; break; default: mga_ram_size = 8; } } #if 0 // printk("List resources -----------\n"); for(temp=0;temp<DEVICE_COUNT_RESOURCE;temp++){ struct resource *res=&pci_dev->resource[temp]; if(res->flags){ int size=(1+res->end-res->start)>>20; printk(KERN_DEBUG "res %d: start: 0x%X end: 0x%X (%d MB) flags=0x%X\n",temp,res->start,res->end,size,res->flags); if(res->flags&(IORESOURCE_MEM|IORESOURCE_PREFETCH)){ if(size>mga_ram_size && size<=64) mga_ram_size=size; } } } #endif printk(KERN_INFO "mga_vid: detected RAMSIZE is %d MB\n", (unsigned int) mga_ram_size); #endif } #ifdef MGA_ALLOW_IRQ if ( mga_irq != -1 ) { int tmp = request_irq(mga_irq, mga_handle_irq, SA_INTERRUPT | SA_SHIRQ, "Syncfb Time Base", &mga_irq); if ( tmp ) { printk(KERN_INFO "syncfb (mga): cannot register irq %d (Err: %d)\n", mga_irq, tmp); mga_irq=-1; } else { printk(KERN_DEBUG "syncfb (mga): registered irq %d\n", mga_irq); } } else { printk(KERN_INFO "syncfb (mga): No valid irq was found\n"); mga_irq=-1; } #else printk(KERN_INFO "syncfb (mga): IRQ disabled in mga_vid.c\n"); mga_irq=-1; #endif return TRUE; } static ssize_t mga_vid_read(struct file *file, char *buf, size_t count, loff_t *ppos) { return -EINVAL; } static ssize_t mga_vid_write(struct file *file, const char *buf, size_t count, loff_t *ppos) { return -EINVAL; } static int mga_vid_mmap(struct file *file, struct vm_area_struct *vma) { printk(KERN_DEBUG "mga_vid: mapping video memory into userspace\n"); if(remap_page_range(vma->vm_start, mga_mem_base + mga_src_base, vma->vm_end - vma->vm_start, vma->vm_page_prot)) { printk(KERN_ERR "mga_vid: error mapping video memory\n"); return(-EAGAIN); } return(0); } static int mga_vid_release(struct inode *inode, struct file *file) { //Close the window just in case printk(KERN_DEBUG "mga_vid: Video OFF (release)\n"); vid_src_ready = 0; regs.besctl &= ~1; regs.besglobctl &= ~(1<<6); // UYVY format selected mga_vid_write_regs(); mga_vid_in_use = 0; MOD_DEC_USE_COUNT; return 0; } static long long mga_vid_lseek(struct file *file, long long offset, int origin) { return -ESPIPE; } static int mga_vid_open(struct inode *inode, struct file *file) { int minor = MINOR(inode->i_rdev); if(minor != 0) return(-ENXIO); if(mga_vid_in_use == 1) return(-EBUSY); mga_vid_in_use = 1; MOD_INC_USE_COUNT; return(0); } #if LINUX_VERSION_CODE >= 0x020400 static struct file_operations mga_vid_fops = { llseek: mga_vid_lseek, read: mga_vid_read, write: mga_vid_write, ioctl: mga_vid_ioctl, mmap: mga_vid_mmap, open: mga_vid_open, release: mga_vid_release }; #else static struct file_operations mga_vid_fops = { mga_vid_lseek, mga_vid_read, mga_vid_write, NULL, NULL, mga_vid_ioctl, mga_vid_mmap, mga_vid_open, NULL, mga_vid_release }; #endif /* * Main Initialization Function */ static int mga_vid_initialize(void) { mga_vid_in_use = 0; // printk(KERN_INFO "Matrox MGA G200/G400 YUV Video interface v0.01 (c) Aaron Holtzman \n"); printk(KERN_INFO "Matrox MGA G200/G400/G450 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi\n"); if (mga_ram_size) { if (mga_ram_size<4 || mga_ram_size>64) { printk(KERN_ERR "mga_vid: invalid RAMSIZE: %d MB\n", mga_ram_size); return -EINVAL; } } if(register_chrdev(MGA_VID_MAJOR, "mga_vid", &mga_vid_fops)) { printk(KERN_ERR "mga_vid: unable to get major: %d\n", MGA_VID_MAJOR); return -EIO; } if (!mga_vid_find_card()) { printk(KERN_ERR "mga_vid: no supported devices found\n"); unregister_chrdev(MGA_VID_MAJOR, "mga_vid"); return -EINVAL; } return(0); } int init_module(void) { return mga_vid_initialize(); } void cleanup_module(void) { #ifdef MGA_ALLOW_IRQ if ( mga_irq != -1) free_irq(mga_irq, &mga_irq); #endif if(mga_mmio_base) iounmap(mga_mmio_base); //FIXME turn off BES printk(KERN_INFO "mga_vid: Cleaning up module\n"); unregister_chrdev(MGA_VID_MAJOR, "mga_vid"); }