Mercurial > mplayer.hg

// YUY2 support (see config.format) added by A'rpi/ESP-team
// double buffering added by A'rpi/ESP-team

// Set this value, if autodetection fails! (video ram size in megabytes)
// #define MGA_MEMORY_SIZE 16

//#define MGA_ALLOW_IRQ

#define MGA_VSYNC_POS 2

/*
 *
 * mga_vid.c
 *
 * Copyright (C) 1999 Aaron Holtzman
 *
 * Module skeleton based on gutted agpgart module by Jeff Hartmann
 * <slicer@ionet.net>
 *
 * Matrox MGA G200/G400 YUV Video Interface module Version 0.1.0
 *
 * BES == Back End Scaler
 *
 * This software has been released under the terms of the GNU Public
 * license. See http://www.gnu.org/copyleft/gpl.html for details.
 */

//It's entirely possible this major conflicts with something else
/* mknod /dev/mga_vid c 178 0 */

#include <linux/config.h>
#include <linux/version.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/malloc.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/init.h>

#include "mga_vid.h"

#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif

#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/io.h>

#define TRUE 1
#define FALSE 0

#define MGA_VID_MAJOR 178

//#define MGA_VIDMEM_SIZE mga_ram_size

#ifndef PCI_DEVICE_ID_MATROX_G200_PCI
#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520
#endif

#ifndef PCI_DEVICE_ID_MATROX_G200_AGP
#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521
#endif

#ifndef PCI_DEVICE_ID_MATROX_G400
#define PCI_DEVICE_ID_MATROX_G400 0x0525
#endif

MODULE_AUTHOR("Aaron Holtzman <aholtzma@engr.uvic.ca>");


typedef struct bes_registers_s
{
	//BES Control
	uint32_t besctl;
	//BES Global control
	uint32_t besglobctl;
	//Luma control (brightness and contrast)
	uint32_t beslumactl;
	//Line pitch
	uint32_t bespitch;

	//Buffer A-1 Chroma 3 plane org
	uint32_t besa1c3org;
	//Buffer A-1 Chroma org
	uint32_t besa1corg;
	//Buffer A-1 Luma org
	uint32_t besa1org;

	//Buffer A-2 Chroma 3 plane org
	uint32_t besa2c3org;
	//Buffer A-2 Chroma org
	uint32_t besa2corg;
	//Buffer A-2 Luma org
	uint32_t besa2org;

	//Buffer B-1 Chroma 3 plane org
	uint32_t besb1c3org;
	//Buffer B-1 Chroma org
	uint32_t besb1corg;
	//Buffer B-1 Luma org
	uint32_t besb1org;

	//Buffer B-2 Chroma 3 plane org
	uint32_t besb2c3org;
	//Buffer B-2 Chroma org
	uint32_t besb2corg;
	//Buffer B-2 Luma org
	uint32_t besb2org;

	//BES Horizontal coord
	uint32_t beshcoord;
	//BES Horizontal inverse scaling [5.14]
	uint32_t beshiscal;
	//BES Horizontal source start [10.14] (for scaling)
	uint32_t beshsrcst;
	//BES Horizontal source ending [10.14] (for scaling)
	uint32_t beshsrcend;
	//BES Horizontal source last
	uint32_t beshsrclst;


	//BES Vertical coord
	uint32_t besvcoord;
	//BES Vertical inverse scaling [5.14]
	uint32_t besviscal;
	//BES Field 1 vertical source last position
	uint32_t besv1srclst;
	//BES Field 1 weight start
	uint32_t besv1wght;
	//BES Field 2 vertical source last position
	uint32_t besv2srclst;
	//BES Field 2 weight start
	uint32_t besv2wght;

} bes_registers_t;

static bes_registers_t regs;
static uint32_t mga_vid_in_use = 0;
static uint32_t is_g400 = 0;
static uint32_t vid_src_ready = 0;
static uint32_t vid_overlay_on = 0;

static uint8_t *mga_mmio_base = 0;
static uint32_t mga_mem_base = 0;

static int mga_src_base = 0;	// YUV buffer position in video memory

static uint32_t mga_ram_size = 0;	// how much megabytes videoram we have

//static int mga_force_memsize = 0;

MODULE_PARM(mga_ram_size, "i");

static struct pci_dev *pci_dev;

static mga_vid_config_t mga_config;

static int mga_irq = -1;

//All register offsets are converted to word aligned offsets (32 bit)
//because we want all our register accesses to be 32 bits
#define VCOUNT      0x1e20

#define PALWTADD      0x3c00 // Index register for X_DATAREG port
#define X_DATAREG     0x3c0a

#define XMULCTRL      0x19
#define BPP_8         0x00
#define BPP_15        0x01
#define BPP_16        0x02
#define BPP_24        0x03
#define BPP_32_DIR    0x04
#define BPP_32_PAL    0x07

#define XCOLMSK       0x40
#define X_COLKEY      0x42
#define XKEYOPMODE    0x51
#define XCOLMSK0RED   0x52
#define XCOLMSK0GREEN 0x53
#define XCOLMSK0BLUE  0x54
#define XCOLKEY0RED   0x55
#define XCOLKEY0GREEN 0x56
#define XCOLKEY0BLUE  0x57

// Backend Scaler registers
#define BESCTL      0x3d20
#define BESGLOBCTL  0x3dc0
#define BESLUMACTL  0x3d40
#define BESPITCH    0x3d24

#define BESA1C3ORG  0x3d60
#define BESA1CORG   0x3d10
#define BESA1ORG    0x3d00

#define BESA2C3ORG  0x3d64
#define BESA2CORG   0x3d14
#define BESA2ORG    0x3d04

#define BESB1C3ORG  0x3d68
#define BESB1CORG   0x3d18
#define BESB1ORG    0x3d08

#define BESB2C3ORG  0x3d6C
#define BESB2CORG   0x3d1C
#define BESB2ORG    0x3d0C

#define BESHCOORD   0x3d28
#define BESHISCAL   0x3d30
#define BESHSRCEND  0x3d3C
#define BESHSRCLST  0x3d50
#define BESHSRCST   0x3d38
#define BESV1WGHT   0x3d48
#define BESV2WGHT   0x3d4c
#define BESV1SRCLST 0x3d54
#define BESV2SRCLST 0x3d58
#define BESVISCAL   0x3d34
#define BESVCOORD   0x3d2c
#define BESSTATUS   0x3dc4

#define CRTCX	    0x1fd4
#define CRTCD	    0x1fd5
#define	IEN	    0x1e1c
#define ICLEAR	    0x1e18
#define STATUS      0x1e14

static int mga_next_frame=0;

static void mga_vid_frame_sel(int frame)
{
    if ( mga_irq != -1 ) {
	mga_next_frame=frame;
    } else {

	//we don't need the vcount protection as we're only hitting
	//one register (and it doesn't seem to be double buffered)
	regs.besctl = (regs.besctl & ~0x07000000) + (frame << 25);
	writel( regs.besctl, mga_mmio_base + BESCTL );

//	writel( regs.besglobctl + ((readl(mga_mmio_base + VCOUNT)+2)<<16),
	writel( regs.besglobctl + (MGA_VSYNC_POS<<16),
			mga_mmio_base + BESGLOBCTL);

    }
}


static void mga_vid_write_regs(void)
{
	//Make sure internal registers don't get updated until we're done
	writel( (readl(mga_mmio_base + VCOUNT)-1)<<16,
			mga_mmio_base + BESGLOBCTL);

	// color or coordinate keying
	writeb( XKEYOPMODE, mga_mmio_base + PALWTADD);
	writeb( mga_config.colkey_on, mga_mmio_base + X_DATAREG);
	if ( mga_config.colkey_on )
	{
		uint32_t r=0, g=0, b=0;

		writeb( XMULCTRL, mga_mmio_base + PALWTADD);
		switch (readb (mga_mmio_base + X_DATAREG))
		{
			case BPP_8:
				/* Need to look up the color index, just using
														 color 0 for now. */
			break;

			case BPP_15:
				r = mga_config.colkey_red   >> 3;
				g = mga_config.colkey_green >> 3;
				b = mga_config.colkey_blue  >> 3;
			break;

			case BPP_16:
				r = mga_config.colkey_red   >> 3;
				g = mga_config.colkey_green >> 2;
				b = mga_config.colkey_blue  >> 3;
			break;

			case BPP_24:
			case BPP_32_DIR:
			case BPP_32_PAL:
				r = mga_config.colkey_red;
				g = mga_config.colkey_green;
				b = mga_config.colkey_blue;
			break;
		}

		// Disable color keying on alpha channel
		writeb( XCOLMSK, mga_mmio_base + PALWTADD);
		writeb( 0x00, mga_mmio_base + X_DATAREG);
		writeb( X_COLKEY, mga_mmio_base + PALWTADD);
		writeb( 0x00, mga_mmio_base + X_DATAREG);

		// Set up color key registers
		writeb( XCOLKEY0RED, mga_mmio_base + PALWTADD);
		writeb( r, mga_mmio_base + X_DATAREG);
		writeb( XCOLKEY0GREEN, mga_mmio_base + PALWTADD);
		writeb( g, mga_mmio_base + X_DATAREG);
		writeb( XCOLKEY0BLUE, mga_mmio_base + PALWTADD);
		writeb( b, mga_mmio_base + X_DATAREG);

		// Set up color key mask registers
		writeb( XCOLMSK0RED, mga_mmio_base + PALWTADD);
		writeb( 0xff, mga_mmio_base + X_DATAREG);
		writeb( XCOLMSK0GREEN, mga_mmio_base + PALWTADD);
		writeb( 0xff, mga_mmio_base + X_DATAREG);
		writeb( XCOLMSK0BLUE, mga_mmio_base + PALWTADD);
		writeb( 0xff, mga_mmio_base + X_DATAREG);
	}

	// Backend Scaler
	writel( regs.besctl,      mga_mmio_base + BESCTL);
	if(is_g400)
		writel( regs.beslumactl,  mga_mmio_base + BESLUMACTL);
	writel( regs.bespitch,    mga_mmio_base + BESPITCH);

	writel( regs.besa1org,    mga_mmio_base + BESA1ORG);
	writel( regs.besa1corg,   mga_mmio_base + BESA1CORG);
	writel( regs.besa2org,    mga_mmio_base + BESA2ORG);
	writel( regs.besa2corg,   mga_mmio_base + BESA2CORG);
	writel( regs.besb1org,    mga_mmio_base + BESB1ORG);
	writel( regs.besb1corg,   mga_mmio_base + BESB1CORG);
	writel( regs.besb2org,    mga_mmio_base + BESB2ORG);
	writel( regs.besb2corg,   mga_mmio_base + BESB2CORG);
	if(is_g400)
	{
		writel( regs.besa1c3org,  mga_mmio_base + BESA1C3ORG);
		writel( regs.besa2c3org,  mga_mmio_base + BESA2C3ORG);
		writel( regs.besb1c3org,  mga_mmio_base + BESB1C3ORG);
		writel( regs.besb2c3org,  mga_mmio_base + BESB2C3ORG);
	}

	writel( regs.beshcoord,   mga_mmio_base + BESHCOORD);
	writel( regs.beshiscal,   mga_mmio_base + BESHISCAL);
	writel( regs.beshsrcst,   mga_mmio_base + BESHSRCST);
	writel( regs.beshsrcend,  mga_mmio_base + BESHSRCEND);
	writel( regs.beshsrclst,  mga_mmio_base + BESHSRCLST);

	writel( regs.besvcoord,   mga_mmio_base + BESVCOORD);
	writel( regs.besviscal,   mga_mmio_base + BESVISCAL);

	writel( regs.besv1srclst, mga_mmio_base + BESV1SRCLST);
	writel( regs.besv1wght,   mga_mmio_base + BESV1WGHT);
	writel( regs.besv2srclst, mga_mmio_base + BESV2SRCLST);
	writel( regs.besv2wght,   mga_mmio_base + BESV2WGHT);

	//update the registers somewhere between 1 and 2 frames from now.
	writel( regs.besglobctl + ((readl(mga_mmio_base + VCOUNT)+2)<<16),
			mga_mmio_base + BESGLOBCTL);

#if 0
	printk(KERN_DEBUG "mga_vid: wrote BES registers\n");
	printk(KERN_DEBUG "mga_vid: BESCTL = 0x%08x\n",
			readl(mga_mmio_base + BESCTL));
	printk(KERN_DEBUG "mga_vid: BESGLOBCTL = 0x%08x\n",
			readl(mga_mmio_base + BESGLOBCTL));
	printk(KERN_DEBUG "mga_vid: BESSTATUS= 0x%08x\n",
			readl(mga_mmio_base + BESSTATUS));
#endif
}

static int mga_vid_set_config(mga_vid_config_t *config)
{
	int x, y, sw, sh, dw, dh;
	int besleft, bestop, ifactor, ofsleft, ofstop, baseadrofs, weight, weights;
	int frame_size=config->frame_size;
	x = config->x_org;
	y = config->y_org;
	sw = config->src_width;
	sh = config->src_height;
	dw = config->dest_width;
	dh = config->dest_height;

	printk(KERN_DEBUG "mga_vid: Setting up a %dx%d+%d+%d video window (src %dx%d) format %X\n",
	       dw, dh, x, y, sw, sh, config->format);

	//FIXME check that window is valid and inside desktop

	//FIXME figure out a better way to allocate memory on card
	//allocate 2 megs
	//mga_src_base = mga_mem_base + (MGA_VIDMEM_SIZE-2) * 0x100000;
	//mga_src_base = (MGA_VIDMEM_SIZE-3) * 0x100000;


	//Setup the BES registers for a three plane 4:2:0 video source

	regs.besglobctl = 0;

switch(config->format){
    case MGA_VID_FORMAT_YV12:
    case MGA_VID_FORMAT_I420:
    case MGA_VID_FORMAT_IYUV:
	regs.besctl = 1         // BES enabled
                    + (0<<6)    // even start polarity
                    + (1<<10)   // x filtering enabled
                    + (1<<11)   // y filtering enabled
                    + (1<<16)   // chroma upsampling
                    + (1<<17)   // 4:2:0 mode
                    + (1<<18);  // dither enabled
#if 0
	if(is_g400)
	{
		//zoom disabled, zoom filter disabled, 420 3 plane format, proc amp
		//disabled, rgb mode disabled
		regs.besglobctl = (1<<5);
	}
	else
	{
		//zoom disabled, zoom filter disabled, Cb samples in 0246, Cr
		//in 1357, BES register update on besvcnt
	        regs.besglobctl = 0;
	}
#endif
        break;

    case MGA_VID_FORMAT_YUY2:
	regs.besctl = 1         // BES enabled
                    + (0<<6)    // even start polarity
                    + (1<<10)   // x filtering enabled
                    + (1<<11)   // y filtering enabled
                    + (1<<16)   // chroma upsampling
                    + (0<<17)   // 4:2:2 mode
                    + (1<<18);  // dither enabled

	regs.besglobctl = 0;        // YUY2 format selected
        break;

    case MGA_VID_FORMAT_UYVY:
	regs.besctl = 1         // BES enabled
                    + (0<<6)    // even start polarity
                    + (1<<10)   // x filtering enabled
                    + (1<<11)   // y filtering enabled
                    + (1<<16)   // chroma upsampling
                    + (0<<17)   // 4:2:2 mode
                    + (1<<18);  // dither enabled

	regs.besglobctl = 1<<6;        // UYVY format selected
        break;

    default:
	printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format);
	return -1;
}


	//Disable contrast and brightness control
	regs.besglobctl |= (1<<5) + (1<<7);
	regs.beslumactl = (0x7f << 16) + (0x80<<0);
	regs.beslumactl = 0x80<<0;

	//Setup destination window boundaries
	besleft = x > 0 ? x : 0;
	bestop = y > 0 ? y : 0;
	regs.beshcoord = (besleft<<16) + (x + dw-1);
	regs.besvcoord = (bestop<<16) + (y + dh-1);

	//Setup source dimensions
	regs.beshsrclst  = (sw - 1) << 16;
	regs.bespitch = (sw + 31) & ~31 ;

	//Setup horizontal scaling
	ifactor = ((sw-1)<<14)/(dw-1);
	ofsleft = besleft - x;

	regs.beshiscal = ifactor<<2;
	regs.beshsrcst = (ofsleft*ifactor)<<2;
	regs.beshsrcend = regs.beshsrcst + (((dw - ofsleft - 1) * ifactor) << 2);

	//Setup vertical scaling
	ifactor = ((sh-1)<<14)/(dh-1);
	ofstop = bestop - y;

	regs.besviscal = ifactor<<2;

	baseadrofs = ((ofstop*regs.besviscal)>>16)*regs.bespitch;
	//frame_size = ((sw + 31) & ~31) * sh + (((sw + 31) & ~31) * sh) / 2;
	regs.besa1org = (uint32_t) mga_src_base + baseadrofs;
	regs.besa2org = (uint32_t) mga_src_base + baseadrofs + 1*frame_size;
	regs.besb1org = (uint32_t) mga_src_base + baseadrofs + 2*frame_size;
	regs.besb2org = (uint32_t) mga_src_base + baseadrofs + 3*frame_size;

if(config->format==MGA_VID_FORMAT_YV12
 ||config->format==MGA_VID_FORMAT_IYUV
 ||config->format==MGA_VID_FORMAT_I420
 ){
        // planar YUV frames:
	if (is_g400)
		baseadrofs = (((ofstop*regs.besviscal)/4)>>16)*regs.bespitch;
	else
		baseadrofs = (((ofstop*regs.besviscal)/2)>>16)*regs.bespitch;

    if(config->format==MGA_VID_FORMAT_YV12){
	regs.besa1corg = (uint32_t) mga_src_base + baseadrofs + regs.bespitch * sh ;
	regs.besa2corg = (uint32_t) mga_src_base + baseadrofs + 1*frame_size + regs.bespitch * sh;
	regs.besb1corg = (uint32_t) mga_src_base + baseadrofs + 2*frame_size + regs.bespitch * sh;
	regs.besb2corg = (uint32_t) mga_src_base + baseadrofs + 3*frame_size + regs.bespitch * sh;
	regs.besa1c3org = regs.besa1corg + ((regs.bespitch * sh) / 4);
	regs.besa2c3org = regs.besa2corg + ((regs.bespitch * sh) / 4);
	regs.besb1c3org = regs.besb1corg + ((regs.bespitch * sh) / 4);
	regs.besb2c3org = regs.besb2corg + ((regs.bespitch * sh) / 4);
    } else {
	regs.besa1c3org = (uint32_t) mga_src_base + baseadrofs + regs.bespitch * sh ;
	regs.besa2c3org = (uint32_t) mga_src_base + baseadrofs + 1*frame_size + regs.bespitch * sh;
	regs.besb1c3org = (uint32_t) mga_src_base + baseadrofs + 2*frame_size + regs.bespitch * sh;
	regs.besb2c3org = (uint32_t) mga_src_base + baseadrofs + 3*frame_size + regs.bespitch * sh;
	regs.besa1corg = regs.besa1c3org + ((regs.bespitch * sh) / 4);
	regs.besa2corg = regs.besa2c3org + ((regs.bespitch * sh) / 4);
	regs.besb1corg = regs.besb1c3org + ((regs.bespitch * sh) / 4);
	regs.besb2corg = regs.besb2c3org + ((regs.bespitch * sh) / 4);
    }

}

	weight = ofstop * (regs.besviscal >> 2);
	weights = weight < 0 ? 1 : 0;
	regs.besv2wght = regs.besv1wght = (weights << 16) + ((weight & 0x3FFF) << 2);
	regs.besv2srclst = regs.besv1srclst = sh - 1 - (((ofstop * regs.besviscal) >> 16) & 0x03FF);

	mga_vid_write_regs();
	return 0;
}

#ifdef MGA_ALLOW_IRQ

static void enable_irq(){
	long int cc;

	cc = readl(mga_mmio_base + IEN);
//	printk(KERN_ALERT "*** !!! IRQREG = %d\n", (int)(cc&0xff));

	writeb( 0x11, mga_mmio_base + CRTCX);

	writeb(0x20, mga_mmio_base + CRTCD );  /* clear 0, enable off */
	writeb(0x00, mga_mmio_base + CRTCD );  /* enable on */
	writeb(0x10, mga_mmio_base + CRTCD );  /* clear = 1 */

	writel( regs.besglobctl , mga_mmio_base + BESGLOBCTL);

}

static void disable_irq(){

	writeb( 0x11, mga_mmio_base + CRTCX);
	writeb(0x20, mga_mmio_base + CRTCD );  /* clear 0, enable off */

}

void mga_handle_irq(int irq, void *dev_id, struct pt_regs *pregs) {
//	static int frame=0;
//	static int counter=0;
	long int cc;
//	if ( ! mga_enabled_flag ) return;

//	printk(KERN_DEBUG "vcount = %d\n",readl(mga_mmio_base + VCOUNT));

	//printk("mga_interrupt #%d\n", irq);

	if ( irq != -1 ) {

		cc = readl(mga_mmio_base + STATUS);
		if ( ! (cc & 0x10) ) return;  /* vsyncpen */
// 		debug_irqcnt++;
	}

//    if ( debug_irqignore ) {
//	debug_irqignore = 0;


/*
	if ( mga_conf_deinterlace ) {
		if ( mga_first_field ) {
			// printk("mga_interrupt first field\n");
			if ( syncfb_interrupt() )
				mga_first_field = 0;
		} else {
			// printk("mga_interrupt second field\n");
			mga_select_buffer( mga_current_field | 2 );
			mga_first_field = 1;
		}
	} else {
		syncfb_interrupt();
	}
*/

//	frame=(frame+1)&1;
	regs.besctl = (regs.besctl & ~0x07000000) + (mga_next_frame << 25);
	writel( regs.besctl, mga_mmio_base + BESCTL );

#if 0
	++counter;
	if(!(counter&63)){
	    printk("mga irq counter = %d\n",counter);
	}
#endif

//    } else {
//	debug_irqignore = 1;
//    }

	if ( irq != -1 ) {
		writeb( 0x11, mga_mmio_base + CRTCX);
		writeb( 0, mga_mmio_base + CRTCD );
		writeb( 0x10, mga_mmio_base + CRTCD );
	}

//	writel( regs.besglobctl, mga_mmio_base + BESGLOBCTL);


	return;

}

#endif

static int mga_vid_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
	int frame;

	switch(cmd)
	{
		case MGA_VID_CONFIG:
			//FIXME remove
//			printk(KERN_DEBUG "vcount = %d\n",readl(mga_mmio_base + VCOUNT));
			printk(KERN_DEBUG "mga_mmio_base = %p\n",mga_mmio_base);
			printk(KERN_DEBUG "mga_mem_base = %08x\n",mga_mem_base);
			//FIXME remove

			printk(KERN_DEBUG "mga_vid: Received configuration\n");

 			if(copy_from_user(&mga_config,(mga_vid_config_t*) arg,sizeof(mga_vid_config_t)))
			{
				printk(KERN_ERR "mga_vid: failed copy from userspace\n");
				return(-EFAULT);
			}
			if(mga_config.version != MGA_VID_VERSION){
				printk(KERN_ERR "mga_vid: incompatible version! driver: %X  requested: %X\n",MGA_VID_VERSION,mga_config.version);
				return(-EFAULT);
			}

			if(mga_config.frame_size==0 || mga_config.frame_size>1024*768*2){
				printk(KERN_ERR "mga_vid: illegal frame_size: %d\n",mga_config.frame_size);
				return(-EFAULT);
			}

			if(mga_config.num_frames<1 || mga_config.num_frames>4){
				printk(KERN_ERR "mga_vid: illegal num_frames: %d\n",mga_config.num_frames);
				return(-EFAULT);
			}

			mga_src_base = (mga_ram_size*0x100000-mga_config.num_frames*mga_config.frame_size);
			if(mga_src_base<0){
				printk(KERN_ERR "mga_vid: not enough memory for frames!\n");
				return(-EFAULT);
			}
			mga_src_base &= (~0xFFFF); // 64k boundary
			printk(KERN_DEBUG "mga YUV buffer base: 0x%X\n", mga_src_base);

			if (is_g400)
			  mga_config.card_type = MGA_G400;
			else
			  mga_config.card_type = MGA_G200;

			mga_config.ram_size = mga_ram_size;

			if (copy_to_user((mga_vid_config_t *) arg, &mga_config, sizeof(mga_vid_config_t)))
			{
				printk(KERN_ERR "mga_vid: failed copy to userspace\n");
				return(-EFAULT);
			}
			return mga_vid_set_config(&mga_config);
		break;

		case MGA_VID_ON:
			printk(KERN_DEBUG "mga_vid: Video ON\n");
			vid_src_ready = 1;
			if(vid_overlay_on)
			{
				regs.besctl |= 1;
				mga_vid_write_regs();
			}
#ifdef MGA_ALLOW_IRQ
			if ( mga_irq != -1 ) enable_irq();
#endif
			mga_next_frame=0;
		break;

		case MGA_VID_OFF:
			printk(KERN_DEBUG "mga_vid: Video OFF (ioctl)\n");
			vid_src_ready = 0;
#ifdef MGA_ALLOW_IRQ
			if ( mga_irq != -1 ) disable_irq();
#endif
			regs.besctl &= ~1;
                        regs.besglobctl &= ~(1<<6);  // UYVY format selected
			mga_vid_write_regs();
		break;

		case MGA_VID_FSEL:
			if(copy_from_user(&frame,(int *) arg,sizeof(int)))
			{
				printk(KERN_ERR "mga_vid: FSEL failed copy from userspace\n");
				return(-EFAULT);
			}

			mga_vid_frame_sel(frame);
		break;

	        default:
			printk(KERN_ERR "mga_vid: Invalid ioctl\n");
			return (-EINVAL);
	}

	return 0;
}


static int mga_vid_find_card(void)
{
	struct pci_dev *dev = NULL;
	unsigned int card_option;

	if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400, NULL)))
	{
		is_g400 = 1;
		printk(KERN_INFO "mga_vid: Found MGA G400/G450\n");
	}
	else if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, NULL)))
	{
		is_g400 = 0;
		printk(KERN_INFO "mga_vid: Found MGA G200 AGP\n");
	}
	else if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI, NULL)))
	{
		is_g400 = 0;
		printk(KERN_INFO "mga_vid: Found MGA G200 PCI\n");
	}
	else
	{
		printk(KERN_ERR "mga_vid: No supported cards found\n");
		return FALSE;
	}

	pci_dev = dev;

	mga_irq = pci_dev->irq;

#if LINUX_VERSION_CODE >= 0x020300
	mga_mmio_base = ioremap_nocache(dev->resource[1].start,0x4000);
	mga_mem_base =  dev->resource[0].start;
#else
	mga_mmio_base = ioremap_nocache(dev->base_address[1] & PCI_BASE_ADDRESS_MEM_MASK,0x4000);
	mga_mem_base =  dev->base_address[0] & PCI_BASE_ADDRESS_MEM_MASK;
#endif
	printk(KERN_INFO "mga_vid: MMIO at 0x%p IRQ: %d  framebuffer: 0x%08X\n", mga_mmio_base, mga_irq, mga_mem_base);

	pci_read_config_dword(dev,  0x40, &card_option);
	printk(KERN_INFO "mga_vid: OPTION word: 0x%08X  mem: 0x%02X  %s\n", card_option,
		(card_option>>10)&0x17, ((card_option>>14)&1)?"SGRAM":"SDRAM");

//	temp = (card_option >> 10) & 0x17;

	if (mga_ram_size) {
		printk(KERN_INFO "mga_vid: RAMSIZE forced to %d MB\n", mga_ram_size);
	} else {

#ifdef MGA_MEMORY_SIZE
	    mga_ram_size = MGA_MEMORY_SIZE;
	    printk(KERN_INFO "mga_vid: hard-coded RAMSIZE is %d MB\n", (unsigned int) mga_ram_size);

#else

	    if (is_g400){
		switch((card_option>>10)&0x17){
		    // SDRAM:
		    case 0x00:
		    case 0x04:  mga_ram_size = 16; break;
		    case 0x03:  mga_ram_size = 32; break;
		    // SGRAM:
		    case 0x10:
		    case 0x14:  mga_ram_size = 32; break;
		    case 0x11:
		    case 0x12:  mga_ram_size = 16; break;
		    default:
			mga_ram_size = 16;
			printk(KERN_INFO "mga_vid: Couldn't detect RAMSIZE, assuming 16MB!");
		}
	    }else{
		switch((card_option>>10)&0x17){
//		    case 0x10:
//		    case 0x13:  mga_ram_size = 8; break;
		    default: mga_ram_size = 8;
		}
	    }
#if 0
//	    printk("List resources -----------\n");
	    for(temp=0;temp<DEVICE_COUNT_RESOURCE;temp++){
	        struct resource *res=&pci_dev->resource[temp];
	        if(res->flags){
	          int size=(1+res->end-res->start)>>20;
	          printk(KERN_DEBUG "res %d:  start: 0x%X   end: 0x%X  (%d MB) flags=0x%X\n",temp,res->start,res->end,size,res->flags);
	          if(res->flags&(IORESOURCE_MEM|IORESOURCE_PREFETCH)){
	              if(size>mga_ram_size && size<=64) mga_ram_size=size;
	          }
	        }
	    }
#endif
	    printk(KERN_INFO "mga_vid: detected RAMSIZE is %d MB\n", (unsigned int) mga_ram_size);
#endif
        }


#ifdef MGA_ALLOW_IRQ
	if ( mga_irq != -1 ) {
		int tmp = request_irq(mga_irq, mga_handle_irq, SA_INTERRUPT | SA_SHIRQ, "Syncfb Time Base", &mga_irq);
		if ( tmp ) {
			printk(KERN_INFO "syncfb (mga): cannot register irq %d (Err: %d)\n", mga_irq, tmp);
			mga_irq=-1;
		} else {
			printk(KERN_DEBUG "syncfb (mga): registered irq %d\n", mga_irq);
		}
	} else {
		printk(KERN_INFO "syncfb (mga): No valid irq was found\n");
		mga_irq=-1;
	}
#else
		printk(KERN_INFO "syncfb (mga): IRQ disabled in mga_vid.c\n");
		mga_irq=-1;
#endif

	return TRUE;
}


static ssize_t mga_vid_read(struct file *file, char *buf, size_t count, loff_t *ppos)
{
	return -EINVAL;
}

static ssize_t mga_vid_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
{
	return -EINVAL;
}

static int mga_vid_mmap(struct file *file, struct vm_area_struct *vma)
{

	printk(KERN_DEBUG "mga_vid: mapping video memory into userspace\n");
	if(remap_page_range(vma->vm_start, mga_mem_base + mga_src_base,
		 vma->vm_end - vma->vm_start, vma->vm_page_prot))
	{
		printk(KERN_ERR "mga_vid: error mapping video memory\n");
		return(-EAGAIN);
	}

	return(0);
}

static int mga_vid_release(struct inode *inode, struct file *file)
{
	//Close the window just in case
	printk(KERN_DEBUG "mga_vid: Video OFF (release)\n");

	vid_src_ready = 0;
	regs.besctl &= ~1;
        regs.besglobctl &= ~(1<<6);  // UYVY format selected
	mga_vid_write_regs();
	mga_vid_in_use = 0;

	MOD_DEC_USE_COUNT;
	return 0;
}

static long long mga_vid_lseek(struct file *file, long long offset, int origin)
{
	return -ESPIPE;
}

static int mga_vid_open(struct inode *inode, struct file *file)
{
	int minor = MINOR(inode->i_rdev);

	if(minor != 0)
	 return(-ENXIO);

	if(mga_vid_in_use == 1)
		return(-EBUSY);

	mga_vid_in_use = 1;
	MOD_INC_USE_COUNT;
	return(0);
}

#if LINUX_VERSION_CODE >= 0x020400
static struct file_operations mga_vid_fops =
{
	llseek:		mga_vid_lseek,
	read:			mga_vid_read,
	write:		mga_vid_write,
	ioctl:		mga_vid_ioctl,
	mmap:			mga_vid_mmap,
	open:			mga_vid_open,
	release: 	mga_vid_release
};
#else
static struct file_operations mga_vid_fops =
{
	mga_vid_lseek,
	mga_vid_read,
	mga_vid_write,
	NULL,
	NULL,
	mga_vid_ioctl,
	mga_vid_mmap,
	mga_vid_open,
	NULL,
	mga_vid_release
};
#endif


/*
 * Main Initialization Function
 */

static int mga_vid_initialize(void)
{
	mga_vid_in_use = 0;

//	printk(KERN_INFO "Matrox MGA G200/G400 YUV Video interface v0.01 (c) Aaron Holtzman \n");
	printk(KERN_INFO "Matrox MGA G200/G400/G450 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi\n");

	if (mga_ram_size) {
		if (mga_ram_size<4 || mga_ram_size>64) {
			printk(KERN_ERR "mga_vid: invalid RAMSIZE: %d MB\n", mga_ram_size);
			return -EINVAL;
		}
	}

	if(register_chrdev(MGA_VID_MAJOR, "mga_vid", &mga_vid_fops))
	{
		printk(KERN_ERR "mga_vid: unable to get major: %d\n", MGA_VID_MAJOR);
		return -EIO;
	}

	if (!mga_vid_find_card())
	{
		printk(KERN_ERR "mga_vid: no supported devices found\n");
		unregister_chrdev(MGA_VID_MAJOR, "mga_vid");
		return -EINVAL;
	}

	return(0);
}

int init_module(void)
{
	return mga_vid_initialize();
}

void cleanup_module(void)
{

#ifdef MGA_ALLOW_IRQ
	if ( mga_irq != -1)
		free_irq(mga_irq, &mga_irq);
#endif

	if(mga_mmio_base)
		iounmap(mga_mmio_base);

	//FIXME turn off BES
	printk(KERN_INFO "mga_vid: Cleaning up module\n");
	unregister_chrdev(MGA_VID_MAJOR, "mga_vid");
}
author	arpi
date	Tue, 28 Aug 2001 21:35:04 +0000
parents	76ca00724e12
children	bddeddc2cf42