Mercurial > mplayer.hg
view libvo/vo_dxr3.c @ 6217:d2167f69a48b
Fix audio/video driver name parsing and remove 2 little memleaks
author | albeu |
---|---|
date | Tue, 28 May 2002 10:08:30 +0000 |
parents | 2001affedb75 |
children | d6c07ebda746 |
line wrap: on
line source
/* * vo_dxr3.c - DXR3/H+ video out * * Copyright (C) 2002 David Holm <dholm@iname.com> * */ /* ChangeLog added 2002-01-10 * 2002-04-15: * The spuenc code isn't 100% stable yet, therefore I'm disabling * it due to the upcoming stable release. * * 2002-04-03: * Carl George added spuenc support * * 2002-03-26: * XorA added an option parser and support for selecting encoder * codec. We thank him again. * * 2002-03-25: * A couple of bugfixes by XorA * * 2002-03-23: * Thanks to Marcel Hild <hild@b4mad.net> the jitter-bug experienced * with some videos have been fixed, many thanks goes to him. * * 2002-03-16: * Fixed problems with fame, it gives a better picture than avcodec, * but is slightly slower. Most notably the wobbling effect is gone * with fame. * * 2002-03-13: * Preliminary fame support added (it breaks after seeking, why?) * * 2002-02-18: * Fixed sync problems when pausing video (while using prebuffering) * * 2002-02-16: * Fixed bug which would case invalid output when using :noprebuf * Removed equalization code, it caused problems on slow systems * * 2002-02-13: * Using the swscaler instead of the old hand coded shit. (Checkout man mplayer and search for sws ;). * Using aspect function to setup a proper mpeg1, no more hassling with odd resolutions or GOP-sizes, * this would only create jitter on some vids! * The swscaler sometimes exits with sig8 on mpegs, I don't know why yet (just use -vc mpegpes in this * case, and report to me if you have any avi's etc which does this...) * * 2002-02-09: * Thanks to the new control() method I have finally been able to enable the em8300 prebuffering. * This should speed up playback on all systems, the vout cpu usage should rocket since I will be hogging * the pci bus. Not to worry though, since frames are prebuffered it should be able to take a few blows * if you start doing other stuff simultaneously. * * 2002-02-03: * Removal of libmp1e, libavcodec has finally become faster (and it's code is helluva lot cleaner) * * 2002-02-02: * Cleaned out some old code which might have slowed down writes * * 2002-01-17: * Testrelease of new sync engine (using previously undocumented feature of em8300). * * 2002-01-15: * Preliminary subpic support with -vc mpegpes and dvd's * Device interfaces tries the new naming scheme by default (even though most users probably still use the old one) * * 2002-01-10: * I rehauled the entire codebase. I have now changed to * Kernighan & Ritchie codingstyle, please mail me if you * find any inconcistencies. */ #include <linux/em8300.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/select.h> #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <fcntl.h> #include <stdio.h> #include <time.h> #include "config.h" #include "fastmemcpy.h" #include "video_out.h" #include "video_out_internal.h" #include "aspect.h" #include "postproc/rgb2rgb.h" #include "postproc/swscale.h" #include "cpudetect.h" #include "spuenc.h" //#define USE_LIBFAME // this is done in configure now /* Libfame codec initialisation */ #ifdef USE_LIBFAME #include "../libfame/fame.h" static unsigned char *outbuf = NULL; static fame_parameters_t fame_params; static fame_yuv_t fame_yuv; static fame_context_t *fame_ctx = NULL; static fame_object_t *fame_obj; #endif /* libavcodec codec initialisation */ #ifdef USE_LIBAVCODEC #ifdef USE_LIBAVCODEC_SO #include <libffmpeg/avcodec.h> #include <libffmpeg/dsputil.h> #else #include "libavcodec/avcodec.h" #include "libavcodec/dsputil.h" #endif /* for video encoder */ static AVCodec *avc_codec = NULL; static AVCodecContext *avc_context = NULL; static AVPicture avc_picture; int avc_outbuf_size = 100000; extern int avcodec_inited; extern int motion_estimation_method; #endif char *picture_data[] = { NULL, NULL, NULL }; int picture_linesize[] = { 0, 0, 0 }; #ifdef HAVE_MMX #include "mmx.h" #endif LIBVO_EXTERN (dxr3) /* codec control */ enum MpegCodec { MPG_CODEC_NON, MPG_CODEC_AVCODEC, MPG_CODEC_FAME }; #if defined(USE_LIBAVCODEC) static int mpeg_codec = MPG_CODEC_AVCODEC; #elif defined(USE_LIBFAME) static int mpeg_codec = MPG_CODEC_FAME; #else static int mpeg_codec = MPG_CODEC_NONE; #endif /* Resolutions and positions */ static int v_width, v_height; static int s_width, s_height; static int osd_w, osd_h; static int noprebuf = 0; static int img_format = 0; static SwsContext * sws = NULL; /* File descriptors */ static int fd_control = -1; static int fd_video = -1; static int fd_spu = -1; static char fdv_name[80]; static char fds_name[80]; /* on screen display/subpics */ static char *osdpicbuf = NULL; static int osdpicbuf_w; static int osdpicbuf_h; static int disposd = 0; static encodedata *spued; /* Static variable used in ioctl's */ static int ioval = 0; static vo_info_t vo_info = { "DXR3/H+ video out", "dxr3", "David Holm <dholm@iname.com>", "" }; uint32_t control(uint32_t request, void *data, ...) { uint32_t flag = 0; switch (request) { case VOCTRL_RESUME: if (!noprebuf) { ioval = EM8300_PLAYMODE_PLAY; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { printf("VO: [dxr3] Unable to set playmode!\n"); } } return VO_TRUE; case VOCTRL_PAUSE: if (!noprebuf) { ioval = EM8300_PLAYMODE_PAUSED; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { printf("VO: [dxr3] Unable to set playmode!\n"); } } return VO_TRUE; case VOCTRL_RESET: if (!noprebuf) { close(fd_video); fd_video = open(fdv_name, O_WRONLY); close(fd_spu); fd_spu = open(fds_name, O_WRONLY); fsync(fd_video); fsync(fd_spu); } return VO_TRUE; case VOCTRL_QUERY_FORMAT: switch (*((uint32_t*)data)) { case IMGFMT_MPEGPES: /* Hardware accelerated | Hardware supports subpics */ flag = VFCAP_CSP_SUPPORTED | VFCAP_CSP_SUPPORTED_BY_HW | VFCAP_SPU; break; #if defined(USE_LIBFAME) || defined(USE_LIBAVCODEC) case IMGFMT_YV12: case IMGFMT_YUY2: case IMGFMT_RGB24: case IMGFMT_BGR24: /* Conversion needed | OSD Supported */ flag = VFCAP_CSP_SUPPORTED | VFCAP_OSD; break; #else default: printf("VO: [dxr3] You have disabled libavcodec/libfame support (Read DOCS/codecs.html)!\n"); #endif } if (noprebuf) { return flag; } else { return (flag | VFCAP_TIMER); } } return VO_NOTIMPL; } static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, uint32_t d_height, uint32_t fullscreen, char *title, uint32_t format, const vo_tune_info_t *info) { int tmp1, tmp2, size; em8300_register_t reg; extern float monitor_aspect; /* Softzoom turned on, downscale */ /* This activates the subpicture processor, you can safely disable this and still send */ /* broken subpics to the em8300, if it's enabled and you send broken subpics you will end */ /* up in a lockup */ ioval = EM8300_SPUMODE_ON; if (ioctl(fd_control, EM8300_IOCTL_SET_SPUMODE, &ioval) < 0) { printf("VO: [dxr3] Unable to set subpicture mode!\n"); uninit(); return -1; } /* Set the playmode to play (just in case another app has set it to something else) */ ioval = EM8300_PLAYMODE_PLAY; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { printf("VO: [dxr3] Unable to set playmode!\n"); } /* Start em8300 prebuffering and sync engine */ reg.microcode_register = 1; reg.reg = 0; reg.val = MVCOMMAND_SYNC; ioctl(fd_control, EM8300_IOCTL_WRITEREG, ®); /* Clean buffer by syncing it */ ioval = EM8300_SUBDEVICE_VIDEO; ioctl(fd_control, EM8300_IOCTL_FLUSH, &ioval); ioval = EM8300_SUBDEVICE_AUDIO; ioctl(fd_control, EM8300_IOCTL_FLUSH, &ioval); fsync(fd_video); if (!noprebuf) { ioval = 0x900; ioctl(fd_control, EM8300_IOCTL_SCR_SETSPEED, &ioval); ioval = 0; ioctl(fd_control, EM8300_IOCTL_SCR_SET, &ioval); } /* Store some variables statically that we need later in another scope */ img_format = format; v_width = width; v_height = height; /* Set monitor_aspect to avoid jitter */ monitor_aspect = (float) width / (float) height; /* libavcodec requires a width and height that is x|16 */ aspect_save_orig(width, height); aspect_save_prescale(d_width, d_height); ioctl(fd_control, EM8300_IOCTL_GET_VIDEOMODE, &ioval); if (ioval == EM8300_VIDEOMODE_NTSC) { printf("VO: [dxr3] Setting up for NTSC.\n"); aspect_save_screenres(352, 240); } else { printf("VO: [dxr3] Setting up for PAL/SECAM.\n"); aspect_save_screenres(352, 288); } aspect(&s_width, &s_height, A_ZOOM); s_width -= s_width % 16; s_height -= s_height % 16; /* Try to figure out whether to use widescreen output or not */ /* Anamorphic widescreen modes makes this a pain in the ass */ tmp1 = abs(d_height - ((d_width / 4) * 3)); tmp2 = abs(d_height - (int) (d_width / 2.35)); if (tmp1 < tmp2) { ioval = EM8300_ASPECTRATIO_4_3; printf("VO: [dxr3] Setting aspect ratio to 4:3\n"); } else { ioval = EM8300_ASPECTRATIO_16_9; printf("VO: [dxr3] Setting aspect ratio to 16:9\n"); } ioctl(fd_control, EM8300_IOCTL_SET_ASPECTRATIO, &ioval); if (format != IMGFMT_MPEGPES) { size = s_width * s_height; picture_data[0] = malloc((size * 3) / 2); picture_data[1] = picture_data[0] + size; picture_data[2] = picture_data[1] + size / 4; picture_linesize[0] = s_width; picture_linesize[1] = s_width / 2; picture_linesize[2] = s_width / 2; switch (mpeg_codec) { #ifdef USE_LIBFAME case MPG_CODEC_FAME: printf("VO: [dxr3] Using FAME\n"); fame_ctx = fame_open(); if (!fame_ctx) { printf("VO: [dxr3] Cannot open libFAME!\n"); return -1; } fame_obj = fame_get_object(fame_ctx, "motion/pmvfast"); fame_register(fame_ctx, "motion", fame_obj); memset(&fame_params, 0, sizeof(fame_parameters_t)); fame_params.width = s_width; fame_params.height = s_height; fame_params.coding = "IPPPPPPP"; fame_params.quality = 90; fame_params.bitrate = 0; fame_params.slices_per_frame = 1; fame_params.frames_per_sequence = (int) (vo_fps + 0.5); fame_params.shape_quality = 100; fame_params.search_range = (int) (vo_fps + 0.5); fame_params.verbose = 0; fame_params.profile = NULL; if (vo_fps < 24.0) { fame_params.frame_rate_num = 24000; fame_params.frame_rate_den = 1001; } else if (vo_fps < 25.0) { fame_params.frame_rate_num = 24; fame_params.frame_rate_den = 1; } else if (vo_fps < 29.0) { fame_params.frame_rate_num = 25; fame_params.frame_rate_den = 1; } else if (vo_fps < 30.0) { fame_params.frame_rate_num = 30000; fame_params.frame_rate_den = 1001; } else if (vo_fps < 50.0) { fame_params.frame_rate_num = 30; fame_params.frame_rate_den = 1; } else if (vo_fps < 55.0) { fame_params.frame_rate_num = 50; fame_params.frame_rate_den = 1; } else if (vo_fps < 60.0) { fame_params.frame_rate_num = 60000; fame_params.frame_rate_den = 1001; } else { fame_params.frame_rate_num = 60; fame_params.frame_rate_den = 1; } outbuf = malloc(100000); fame_init(fame_ctx, &fame_params, outbuf, 100000); fame_yuv.w = s_width; fame_yuv.h = s_height; fame_yuv.y = picture_data[0]; fame_yuv.u = picture_data[1]; fame_yuv.v = picture_data[2]; break; #endif #ifdef USE_LIBAVCODEC case MPG_CODEC_AVCODEC: printf("VO: [dxr3] Using AVCODEC\n"); avc_codec = avcodec_find_encoder(CODEC_ID_MPEG1VIDEO); if (!avc_codec) { printf("VO: [dxr3] Unable to find mpeg1video codec\n"); uninit(); return -1; } if (avc_context) { free(avc_context); } avc_context = malloc(sizeof(AVCodecContext)); memset(avc_context, 0, sizeof(AVCodecContext)); avc_context->width = s_width; avc_context->height = s_height; ioctl(fd_control, EM8300_IOCTL_GET_VIDEOMODE, &ioval); avc_context->gop_size = 7; avc_context->frame_rate = (int) (vo_fps * FRAME_RATE_BASE); avc_context->bit_rate = 0; avc_context->flags = CODEC_FLAG_QSCALE; avc_context->quality = 2; avc_context->pix_fmt = PIX_FMT_YUV420P; motion_estimation_method = ME_EPZS; if (avcodec_open(avc_context, avc_codec) < 0) { printf("VO: [dxr3] Unable to open codec\n"); uninit(); return -1; } /* Create a pixel buffer and set up pointers for color components */ memset(&avc_picture, 0, sizeof(avc_picture)); avc_picture.linesize[0] = picture_linesize[0]; avc_picture.linesize[1] = picture_linesize[1]; avc_picture.linesize[2] = picture_linesize[2]; avc_picture.data[0] = picture_data[0]; avc_picture.data[1] = picture_data[1]; avc_picture.data[2] = picture_data[2]; break; #endif } sws = getSwsContextFromCmdLine(v_width, v_height, img_format, s_width, s_height, IMGFMT_YV12); if (!sws) { printf("vo_vesa: Can't initialize SwScaler\n"); return -1; } /* This stuff calculations the relative position of the osd */ osd_w = s_width; osd_h = s_height; if (format == IMGFMT_BGR24) { yuv2rgb_init(24, MODE_BGR); } else { yuv2rgb_init(24, MODE_RGB); } return 0; } else if (format == IMGFMT_MPEGPES) { printf("VO: [dxr3] Format: MPEG-PES (no conversion needed)\n"); osdpicbuf = malloc(s_width * s_height); if (osdpicbuf == NULL) { printf("vo_dxr3: out of mem\n"); return -1; } spued = (encodedata *) malloc(sizeof(encodedata)); if (spued == NULL) { printf("vo_dxr3:out of mem\n"); return -1; } osd_w = s_width; osd_h = s_height; osdpicbuf_w = s_width; osdpicbuf_h = s_height; return 0; } printf("VO: [dxr3] Format: Unsupported\n"); uninit(); return -1; } static const vo_info_t* get_info(void) { return &vo_info; } static void draw_alpha(int x, int y, int w, int h, unsigned char* src, unsigned char *srca, int srcstride) { /*int lx, ly, bx; unsigned char *buf; buf = &osdpicbuf[(y * osdpicbuf_w) + x]; if (img_format == IMGFMT_MPEGPES) { for (ly = 0; ly < h - 1; ly++) { for(lx = 0; lx < w; lx++) { if ((srca[(ly * srcstride) + lx] != 0) && (src[(ly * srcstride) + lx] != 0)) { if(src[(ly * srcstride) + lx] >= 128) { buf[ly * osdpicbuf_w + lx] = 3; } } } } pixbuf_encode_rle(x, y, osdpicbuf_w, osdpicbuf_h - 1, osdpicbuf, osdpicbuf_w, spued); } else*/ { #if defined(USE_LIBAVCODEC) || defined(USE_LIBFAME) vo_draw_alpha_yv12(w, h, src, srca, srcstride, picture_data[0] + x + y * picture_linesize[0], picture_linesize[0]); #endif } } static void draw_osd(void) { if (img_format != IMGFMT_MPEGPES) { vo_draw_text(osd_w, osd_h, draw_alpha); } /*else if ((disposd % 15) == 0) { vo_draw_text(osd_w, osd_h, draw_alpha); memset(osdpicbuf, 0, s_width * s_height); */ /* could stand some check here to see if the subpic hasn't changed * as if it hasn't and we re-send it it will "blink" as the last one * is turned off, and the new one (same one) is turned on */ /*if (!noprebuf) { ioctl(fd_spu, EM8300_IOCTL_SPU_SETPTS, &vo_pts); } write(fd_spu, spued->data, spued->count); } disposd++;*/ } static uint32_t draw_frame(uint8_t * src[]) { char *pData; int pSize; if (img_format == IMGFMT_MPEGPES) { vo_mpegpes_t *p = (vo_mpegpes_t *) src[0]; if (p->id == 0x20) { if (!noprebuf) { ioctl(fd_spu, EM8300_IOCTL_SPU_SETPTS, &vo_pts); } write(fd_spu, p->data, p->size); } else { write(fd_video, p->data, p->size); } return 0; } else { int size, srcStride = (img_format == IMGFMT_YUY2) ? (v_width * 2) : (v_width * 3); sws->swScale(sws, src, &srcStride, 0, v_height, picture_data, picture_linesize); draw_osd(); switch (mpeg_codec) { #ifdef USE_LIBFAME case MPG_CODEC_FAME: size = fame_encode_frame(fame_ctx, &fame_yuv, NULL); write(fd_video, outbuf, size); break; #endif #ifdef USE_LIBAVCODEC case MPG_CODEC_AVCODEC: size = avcodec_encode_video(avc_context, picture_data[0], avc_outbuf_size, &avc_picture); write(fd_video, picture_data[0], size); break; #endif } return 0; } return -1; } static void flip_page(void) { int size; if (!noprebuf) { ioctl(fd_video, EM8300_IOCTL_VIDEO_SETPTS, &vo_pts); } if (img_format == IMGFMT_YV12) { switch (mpeg_codec) { #ifdef USE_LIBFAME case MPG_CODEC_FAME: size = fame_encode_frame(fame_ctx, &fame_yuv, NULL); write(fd_video, outbuf, size); break; #endif #ifdef USE_LIBAVCODEC case MPG_CODEC_AVCODEC: size = avcodec_encode_video(avc_context, picture_data[0], avc_outbuf_size, &avc_picture); if (!noprebuf) { ioctl(fd_video, EM8300_IOCTL_VIDEO_SETPTS, &vo_pts); } write(fd_video, picture_data[0], size); break; #endif } } } static uint32_t draw_slice(uint8_t *srcimg[], int stride[], int w, int h, int x0, int y0) { if (img_format == IMGFMT_YV12) { sws->swScale(sws, srcimg, stride, y0, h, picture_data, picture_linesize); return 0; } return -1; } static void uninit(void) { printf("VO: [dxr3] Uninitializing\n"); if (sws) { freeSwsContext(sws); } switch (mpeg_codec) { #ifdef USE_LIBFAME case MPG_CODEC_FAME: if (fame_ctx) { fame_close(fame_ctx); } break; #endif #ifdef USE_LIBAVCODEC case MPG_CODEC_AVCODEC: if (avc_context) { avcodec_close(avc_context); } break; #endif } if (picture_data[0]) { free(picture_data[0]); } if (fd_video) { close(fd_video); } if (fd_spu) { close(fd_spu); } if (fd_control) { close(fd_control); } if(osdpicbuf) { free(osdpicbuf); } if(spued) { free(spued); } } static void check_events(void) { } static uint32_t preinit(const char *arg) { char devname[80]; int fdflags = O_WRONLY; CpuCaps cpucaps; GetCpuCaps(&cpucaps); /* Open the control interface */ if (arg && !strncmp("noprebuf", arg, 8)) { printf("VO: [dxr3] Disabling prebuffering.\n"); noprebuf = 1; fdflags |= O_NONBLOCK; arg = strchr(arg, ':'); if (arg) { arg++; } } if (cpucaps.has3DNowExt) { printf("VO: [dxr3] Fast AMD special disabling prebuffering.\n"); noprebuf = 1; fdflags |= O_NONBLOCK; } #if defined(USE_LIBFAME) printf("VO: [dxr3] FAME supported\n"); if (arg && !strncmp("fame", arg, 4)) { mpeg_codec = MPG_CODEC_FAME; arg = strchr(arg, ':'); if (arg) { arg++; } } #endif #if defined(USE_LIBAVCODEC) printf("VO: [dxr3] AVCODEC supported\n"); if (arg && !strncmp("avcodec", arg, 7)) { mpeg_codec = MPG_CODEC_AVCODEC; arg = strchr(arg, ':'); if (arg) { arg++; } } #endif if (arg && arg[0]) { printf("VO: [dxr3] Forcing use of device %s\n", arg); sprintf(devname, "/dev/em8300-%s", arg); } else { /* Try new naming scheme by default */ sprintf(devname, "/dev/em8300-0"); } fd_control = open(devname, fdflags); if (fd_control < 1) { /* Fall back to old naming scheme */ printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300 instead\n", devname); sprintf(devname, "/dev/em8300"); fd_control = open(devname, fdflags); if (fd_control < 1) { printf("VO: [dxr3] Error opening /dev/em8300 for writing as well!\nBailing\n"); return -1; } } /* Open the video interface */ if (arg && !noprebuf) { sprintf(devname, "/dev/em8300_mv-%s", arg); } else { /* Try new naming scheme by default */ sprintf(devname, "/dev/em8300_mv-0"); } fd_video = open(devname, fdflags); if (fd_video < 0) { /* Fall back to old naming scheme */ printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300_mv instead\n", devname); sprintf(devname, "/dev/em8300_mv"); fd_video = open(devname, fdflags); if (fd_video < 0) { printf("VO: [dxr3] Error opening /dev/em8300_mv for writing as well!\nBailing\n"); uninit(); return -1; } } else { printf("VO: [dxr3] Opened %s\n", devname); } strcpy(fdv_name, devname); /* Open the subpicture interface */ fdflags |= O_NONBLOCK; if (arg && !noprebuf) { sprintf(devname, "/dev/em8300_sp-%s", arg); } else { /* Try new naming scheme by default */ sprintf(devname, "/dev/em8300_sp-0"); } fd_spu = open(devname, fdflags); if (fd_spu < 0) { /* Fall back to old naming scheme */ printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300_sp instead\n", devname); sprintf(devname, "/dev/em8300_sp"); fd_spu = open(devname, fdflags); if (fd_spu < 0) { printf("VO: [dxr3] Error opening /dev/em8300_sp for writing as well!\nBailing\n"); uninit(); return -1; } } strcpy(fds_name, devname); #if defined(USE_LIBAVCODEC) if (mpeg_codec == MPG_CODEC_AVCODEC && !avcodec_inited) { avcodec_init(); avcodec_register_all(); avcodec_inited = 1; } #endif return 0; }