view DOCS/tech/manpage.txt @ 19818:d41350794df2

r19823: Remove mpsub section, the format is documented in DOCS/tech.

========================================
A documentation about MPlayer's man page
========================================


About the documentation
-----------------------

Yes it's true: This is the documentation of the documentation (man page).
This guide should be used as a reference for questions about the man page
structure. It's not a strict guide but we recommend following it to get a
uniform man page.



What belongs in the man page?
-----------------------------

    - option descriptions (all)
    - usage (options, configuration files, controls)
    - basic examples



What doesn't belong in the man page?
------------------------------------

    - instructions for installation, encoding and similar processes
    - detailed evaluations or hints
    - tutorials, guides



How should patches look like?
-----------------------------

Follow the rules in patches.txt, they apply to the man page, too.
Exceptions are:

    - Cosmetic patches are allowed but should be done separately from the real
      changes, be marked as cosmetic changes and shouldn't change the general
      style without reasons/permissions.
    - The same applies to spell checking.



How do I create an HTML, text or other version of the man page?
---------------------------------------------------------------

The man page was more or less designed for groff as it is the main tool for
it. Therefore only groff produces acceptable results without changes.
Additionally, the SS variable should be set to either very low or very high
values to produce a better groff HTML output (Due to a bug of groff2html?).
A setting of 4 should look readable. Here's an overview again:

    - groff:     Groff is the "official" tool to convert man pages.
                 To get good results you need a recent version (1.18.2).
                 groff -m man -T html mplayer.1 > mplayer.1.html
                 groff -m man -T latin1 -rLL=78n mplayer.1 | col -bx > mplayer.1.txt
                 The groff man page lists other output formats to use with -T.

    - man2html:  You can view it through a CGI script:
                 http://localhost/cgi-bin/man2html?mplayer
                 The output is unusable as the script doesn't seem to support
                 the macro definitions. Maybe manually changing all leads to
                 acceptable results.

    - rman:      rman -f html mplayer.1 > man_page.rman.html
                 The output is ugly as rman doesn't understand many of the
                 macros used.

    - troffcvt:  troff2html -man mplayer.1 > man_page.tcvt.html
                 The (good) output is similar to groff but simplified...



The structure
-------------

The option descriptions are divided into sections. Inside a section options are
alphabetically sorted. The sections are:

(Header)
    Not visible, copyright and author information.
(Macro definitions)
    Not visible, some macro definitions.
NAME
    The man page is used for both mplayer and mencoder.
SYNOPSIS
    A description of MPlayer's playtree.
DESCRIPTION
    A general description of MPlayer, MEncoder, GMPlayer and its features.
INTERACTIVE CONTROL
    A description of MPlayer's input system and the interactive controls.
USAGE
    Some general notes about usage.
CONFIGURATION FILES
    A description of the configuration file format.
GENERAL OPTIONS
    General options that are common to both MPlayer and MEncoder.
PLAYER OPTIONS (MPLAYER ONLY)
    User interface option descriptions (MPlayer only).
DEMUXER/STREAM OPTIONS
    Demuxer and stream layer option descriptions.
OSD/SUBTITLE OPTIONS
    This section is special in that it contains all subtitle and OSD option
    descriptions even if they might belong to one of the other sections. It was
    created because of its size.
AUDIO OUTPUT OPTIONS (MPLAYER ONLY)
    Audio output layer (ao) option descriptions (MPlayer only).
AUDIO OUTPUT DRIVERS (MPLAYER ONLY)
    Audio output driver description (ao)
VIDEO OUTPUT OPTIONS (MPLAYER ONLY)
    Video output layer (vo) option descriptions (MPlayer only).
VIDEO OUTPUT DRIVERS (MPLAYER ONLY)
    Video output driver description (vo)
DECODING/FILTERING OPTIONS
    Decoding/Filtering layer options (ad, vd, pl).
VIDEO FILTERS
    Video filter description (vf)
GENERAL ENCODING OPTIONS (MENCODER ONLY)
    Encoding option descriptions (ve) (MEncoder only).
CODEC SPECIFIC ENCODING OPTIONS (MENCODER ONLY)
    Codec specific option descriptions (lavc,divx4,xvid,lame) (MEncoder only).
FILES
    A list and description of all installed/used files/directories.
EXAMPLES OF MPLAYER USAGE
    Basic examples. Again: no long descriptions/processes.
EXAMPLES OF MENCODER USAGE
    Basic examples. Again: no long descriptions/processes.
BUGS
AUTHORS



The man page/groff format
-------------------------

Just read this and RTFS:

    man 7 roff
    http://www.tldp.org/HOWTO/mini/Man-Page.html
    man 7 man
    man 7 groff



"Style" guidelines
------------------

This section was kept simple but there are certain guidelines/rules to get a
uniform man page. The best way is to read (and understand) the source.


General:

    - No line should contain more than 79 characters.
    - Used commands: .TH, .SH, .TP, .IP, .PP, .[R]B, .I, .br, .RS, .RE, .na,
                     .nh, .ad, .hy, macro definitions, comments and some more
    - Don't forget the quotation marks around expressions, etc...
    - Each new sentence should start on a line of its own.
    - Put a backslash before a '-' if it denotes a range (1\-10), an option
      (\-fs), stdin (\-) or a dash (mplayer  \- Movie Player for Linux).
      Use just '-' if it is a hyphen (A-V) or a minus (-1). Please note that
      it should be \-dvd-device and not \-dvd\-device.
    - Don't start a line with "'" or ".", nroff treats them specially.


Option descriptions:

    - Options should be in alphabetical order.
    - Option and/or suboption parameters should be short, descriptive and put
      in angular brackets (e.g. \-vo <driver>).
    - If the option has a parameter in a certain range, specify it right after
      the option (e.g. \-subpos <0\-100>).
    - Optional things should be put in square brackets ([]).
    - Obsolete options are followed by (OBSOLETE), beta options by
      (BETA CODE), etc.
    - MPlayer only options in a section which isn't marked this way
      are followed by (MPlayer only).
    - Add references to other options if they belong to each other, e.g.
      '(\-vo zr only)' or '(also see \-alang)' or are commonly used together.
    - If a nontrivial default parameter exists, mention it, e.g. (default: 24).
    - Put examples and notes at the end of the description (before suboptions).
    - The end of the suboptions _always_ has to be followed by a paragraph
      (BUG).
    - For flag options just document the non-default one of -XXX and -noXXX, if
      the option is not a flag, describe both, one below the other (this is an
      exception to the alphabetical order).


Macro definitions (see beginning of man page):

    - .SS     Starting value of the suboption column
    - .IPs    Add new suboption (we use .TP for normal options and .IP for
              the rest)
    - .RSs    Begin of suboptions, end with .RE
    - .RSss   Begin of suboptions in a suboption
    - .REss   End of suboptions in a suboption


Options, suboptions, examples structure:

    - Normal options (note the '<' and '>'):

      [...]
      .TP
      .B \-option <parameter>
      description
      [...]

    - Long suboptions:

      [...]
      description. Available options are:
      .
      .RSs
      .IPs "subopt1=<value>"
      description1
      .IPs "subopt2=<value>"
      description2
      [...]
      .IPs "last subopt=<value>"
      last description
      .RE
      .
      [...]

    - Short suboptions:

      [...]
      description. Available options are:

      .PD 0
      .RSs
      .IPs "subopt1=<value>"
      description1
      .IPs "subopt2=<value>"
      description2
      [...]
      .IPs "last subopt=<value>"
      last description
      .RE
      .PD 1
      .
      [...]

    - Suboptions in suboptions:

      [...]
      .IPs "subopt1=<value>"
      description1
      .RSss
      subsubopt1: description1
      .br
      subsubopt2: description2
      [...]
      .REss
      [...]

    - Examples:

      [...]

      .I EXAMPLE:
      .PD 0
      .RSs
      .IP "-option used parameters"
      description
      [...]
      .RE
      .PD 1
      .
      [...]