Mercurial > mplayer.hg

<?xml version="1.0" encoding="iso-8859-1"?>
<!-- $Revision$ -->
<chapter id="usage">
<title>Usage</title>

<sect1 id="commandline">
<title>Command line</title>

<para>
<application>MPlayer</application> utilizes a complex playtree. It consists
of global options written as first, for example

<screen>mplayer -vfm 5</screen>

and options written after filenames, that apply only to the given
filename/URL/whatever, for example:

<screen>mplayer -vfm 5 <replaceable>movie1.avi</replaceable> <replaceable>movie2.avi</replaceable> -vfm 4</screen>
</para>

<para>
You can group filenames/URLs together using <literal>{</literal> and
<literal>}</literal>. It's useful with option <option>-loop</option>:

<screen>mplayer { 1.avi -loop 2 2.avi } -loop 3</screen>

The above command will play files in this order: 1, 1, 2, 1, 1, 2, 1, 1, 2.
</para>

<para>
Playing a file:
<synopsis>
<command>mplayer</command><!--
--> [<replaceable>options</replaceable>]<!--
--> [<replaceable>path</replaceable>/]<replaceable>filename</replaceable>
</synopsis>
</para>

<para>
Playing more files:
<synopsis>
<command>mplayer</command><!--
--> [<replaceable>default options</replaceable>]<!--
--> [<replaceable>path</replaceable>/]<replaceable>filename1</replaceable><!--
--> [<replaceable>options for filename1</replaceable>]<!--
--> <replaceable>filename2</replaceable><!--
--> [<replaceable>options for filename2</replaceable>] ...
</synopsis>
</para>

<para>
Playing VCD:
<synopsis>
<command>mplayer</command> [<replaceable>options</replaceable>]<!--
--> vcd://<replaceable>trackno</replaceable><!--
--> [-cdrom-device <replaceable>/dev/cdrom</replaceable>]
</synopsis>
</para>

<para>
Playing DVD:
<synopsis>
<command>mplayer</command> [<replaceable>options</replaceable>]<!--
--> dvd://<replaceable>titleno</replaceable><!--
--> [-dvd-device <replaceable>/dev/dvd</replaceable>]
</synopsis>
</para>

<para>
Playing from the WWW:
<synopsis>
<command>mplayer</command> [<replaceable>options</replaceable>]<!--
--> http://<replaceable>site.com/file.asf</replaceable>
</synopsis>
(playlists can be used, too)
</para>

<para>
Playing from RTSP:
<synopsis>
<command>mplayer</command> [<replaceable>options</replaceable>]<!--
--> rtsp://<replaceable>server.example.com/streamName</replaceable>
</synopsis>
</para>

<para>
Examples:
<screen>
mplayer -vo x11 <replaceable>/mnt/Films/Contact/contact2.mpg</replaceable>
mplayer vcd://<replaceable>2</replaceable> -cdrom-device <replaceable>/dev/hdc</replaceable>
mplayer -afm 3 <replaceable>/mnt/DVDtrailers/alien4.vob</replaceable>
mplayer dvd://<replaceable>1</replaceable> -dvd-device <replaceable>/dev/hdc</replaceable>
mplayer -abs 65536 -delay -0.4 -nobps <replaceable>~/movies/test.avi</replaceable><!--
--></screen>
</para>
</sect1>


<sect1 id="control">
<title>Control</title>

<para>
<application>MPlayer</application> has a fully configurable, command
driven, control layer which lets you control
<application>MPlayer</application> with keyboard, mouse, joystick or remote
control (using LIRC). See the man page for the complete list of keyboard controls.
</para>


<sect2 id="ctrl-cfg">
<title>Controls configuration</title>

<para>
<application>MPlayer</application> allows you bind any key/button to any
<application>MPlayer</application> command using a simple config file.
The syntax consist of a key name followed by a command. The default config file location is
<filename>$HOME/.mplayer/input.conf</filename> but it can be overridden
using the <option>-input <replaceable>conf</replaceable></option> option
(relative path are relative to <filename>$HOME/.mplayer</filename>).
</para>

<para>
You can get a full list of supported key names by running
<command>mplayer -input keylist</command>
and a full list of available commands by running
<command>mplayer -input cmdlist</command>.
</para>

<example>
<title>A simple input control file</title>
<programlisting>
##
## MPlayer input control file
##

RIGHT seek +10
LEFT seek -10
- audio_delay 0.100
+ audio_delay -0.100
q quit
&gt; pt_step 1
&lt; pt_step -1
ENTER pt_step 1 1<!--
--></programlisting>
</example>
</sect2>


<sect2 id="lirc">
<title>Control from LIRC</title>

<para>
Linux Infrared Remote Control - use an easy to build home-brewn IR-receiver,
an (almost) arbitrary remote control and control your Linux box with it!
More about it on the <ulink url="http://www.lirc.org">LIRC homepage</ulink>.
</para>

<para>
If you have the LIRC package installed, <filename>configure</filename> will
autodetect it. If everything went fine, <application>MPlayer</application>
will print &quot;<systemitem>Setting up LIRC support...</systemitem>&quot;
on startup. If an error occurs it will tell you. If there is no message about
LIRC there is no support compiled in. That's it :-)
</para>

<para>
The application name for <application>MPlayer</application> is - surprise -
<filename>mplayer</filename>. You can use any <application>MPlayer</application>
commands and even pass more than one command by separating them with
<literal>\n</literal>.
Don't forget to enable the repeat flag in <filename>.lircrc</filename> when
it makes sense (seek, volume, etc). Here's an excerpt from a sample
<filename>.lircrc</filename>:
</para>

<programlisting>
begin
     button = VOLUME_PLUS
     prog = mplayer
     config = volume 1
     repeat = 1
end

begin
    button = VOLUME_MINUS
    prog = mplayer
    config = volume -1
    repeat = 1
end

begin
    button = CD_PLAY
    prog = mplayer
    config = pause
end

begin
    button = CD_STOP
    prog = mplayer
    config = seek 0 1\npause
end<!--
--></programlisting>

<para>
If you don't like the standard location for the lirc-config file
(<filename>~/.lircrc</filename>) use the <option>-lircconf
<replaceable>filename</replaceable></option> switch to specify another
file.
</para>
</sect2>


<sect2 id="slave-mode">
<title>Slave mode</title>
<para>
The slave mode allows you to build simple frontends to
<application>MPlayer</application>. When run with the
<option>-slave</option> option <application>MPlayer</application> will
read commands separated by a newline (\n) from stdin.
The commands are documented in the
<ulink url="../../tech/slave.txt">slave.txt</ulink> file.
</para>
</sect2>
</sect1>


<sect1 id="streaming">
<title>Streaming from network or pipes</title>

<para>
<application>MPlayer</application> can play files from the network, using the
HTTP, FTP, MMS or RTSP/RTP protocol.
</para>

<para>
Playing works simply by passing the URL on the command line.
<application>MPlayer</application> honors the <envar>http_proxy</envar>
environment variable, using a proxy if available. Proxies can also be forced:
<screen>mplayer <replaceable>http_proxy://proxy.micorsops.com:3128/http://micorsops.com:80/stream.asf</replaceable></screen>
</para>

<para>
<application>MPlayer</application> can read from stdin
(<emphasis>not</emphasis> named pipes). This can for example be used to
play from FTP:
<screen>wget <replaceable>ftp://micorsops.com/something.avi</replaceable> -O - | mplayer -</screen>
</para>

<note><para>
It's also recommended to enable <option>-cache</option> when playing
from the network:
<screen>wget <replaceable>ftp://micorsops.com/something.avi</replaceable> -O - | mplayer -cache 8192 -</screen>
</para></note>
</sect1>

<sect1 id="mpst" xreflabel="Remote streams">
<title>Remote streams</title>

<para>
Remote streams allow you to access most <application>MPlayer</application>
stream type from a remote host. The main purpose of this feature is to make
it possible to directly use the CD or DVD drive of another computer on the
network (provided you have the required bandwidth). On the downside some
stream type (currently TV and MF) are not usable remotely because they are
implemented at the demuxer level. It's sad for MF but TV stream would anyway
require an insane amount of bandwidth.
</para>

<sect2 id="compile_mpst_server">
<title>Compiling the server</title>
<para>
After having compiled <application>MPlayer</application> go to the
<filename>TOOLS/netstream</filename> directory and enter
<application>make</application> to build the server binary.
You can then copy the <application>netstream</application> binary
to the right place on your system (usually
<filename class="directory">/usr/local/bin</filename> on Linux).
</para>
</sect2>

<sect2 id="use_mpst">
<title>Using remote streams</title>
<para>
First you have to start the server on the computer you intend to remotely
access. Currently the server is very basic and doesn't have any commands
line arguments so just enter <filename>netstream</filename>. Now you can
for example play the second track of a VCD on the server with :
<screen>
mplayer -cache 5000 <replaceable>mpst://servername/vcd://2</replaceable>
</screen>
You can also access files on this server :
<screen>
mplayer -cache 5000 <replaceable>mpst://servername//usr/local/movies/lol.avi</replaceable>
</screen>
Note that paths which aren't starting with a / will be relative to
the directory where the server is running. The <option>-cache</option> option is not
needed but highly recommended.
</para>

<para>
Be aware that currently the server is not secure at all. So don't complain
about the numerous exploits which are possible through this. Instead send
some (good) patch to make it better or start writing your own server.
</para>

</sect2>

</sect1>

<sect1 id="edl" xreflabel="Edit Decision Lists (EDL)">
<title>Edit Decision Lists (EDL)</title>

<para>
The edit decision list (EDL) system allows you to automatically skip
or mute sections of videos during playback, based on a movie specific
EDL configuration file.
</para>

<para>
This is useful for those who may want to watch a film in "family-friendly"
mode. You can cut out any violence, profanity, Jar-Jar Binks .. from a movie
according to your own personal preferences. Aside from this, there are other
uses, like automatically skipping over commercials in video files you watch.
</para>

<para>
The EDL file format is pretty bare-bones. Once the EDL system has reached a
certain level of maturity, an XML-based file format will probably be implemented
(keeping backwards compatibility with previous EDL formats).
</para>

<sect2 id="edl_using">
<title>Using an EDL file</title>
<para>
Include the <option>-edl &lt;filename&gt;</option> flag when you run
<application>MPlayer</application>, with the name of the EDL file you
want applied to the video.
</para>
</sect2>

<sect2 id="edl_making">
<title>Making an EDL file</title>
<para>
The current EDL file format is:
<programlisting>
[begin second] [end second] [action]
</programlisting>
Where the seconds are floating-point numbers and the action is either
<literal>0</literal> for skip or <literal>1</literal> for mute. Example:
<programlisting>
5.3   7.1    0
15    16.7   1
420   422    0
</programlisting>
This will skip from second 5.3 to second 7.1 of the video, then mute at
15 seconds, unmute at 16.7 seconds and skip from second 420 to second 422
of the video. These actions will be performed when the playback timer
reaches the times given in the file.
</para>

<para>
To create an EDL file to work from, use the <option>-edlout &lt;filename&gt;</option>
flag. During playback, when you want to mark the previous two seconds to skip over,
hit <keycap>i</keycap>. A corresponding entry will be written to the file for
that time. You can then go back and fine-tune the generated EDL file.
</para>
</sect2>

</sect1>

</chapter>
author	rik
date	Thu, 14 Apr 2005 12:44:28 +0000
parents	1fbfc19c5f75
children	741b6a00782f