view libao2/ao_sndio.c @ 36883:e299b6fd7eaa

Fix image size restrictions set by r35242. Luma blocks are 16x16, but chroma blocks are (two interweaved) 8x16. Since chroma is at quarter resolution it means that the image width must be multiple of 16, while height must be multiple of 32.

/*
 * Copyright (c) 2008 Alexandre Ratchov <[e-mail]>
 *
 * This file is part of MPlayer.
 *
 * MPlayer is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
#include <sys/types.h>
#include <poll.h>
#include <errno.h>
#include <sndio.h>
#include <stdlib.h>

#include "config.h"
#include "mp_msg.h"
#include "mixer.h"
#include "help_mp.h"

#include "libaf/af_format.h"

#include "audio_out.h"
#include "audio_out_internal.h"

static ao_info_t info = {
    "sndio audio output",
    "sndio",
    "Alexandre Ratchov <[e-mail]>",
    ""
};

LIBAO_EXTERN(sndio)

static struct sio_hdl *hdl;
static struct pollfd *pfds;
static struct sio_par par;
static int delay, vol, havevol;
static int prepause_delay;

/*
 * control misc parameters (only the volume for now)
 */
static int control(int cmd, void *arg)
{
    ao_control_vol_t *ctl = arg;

    switch (cmd) {
    case AOCONTROL_GET_VOLUME:
        if (!havevol)
            return CONTROL_FALSE;
        ctl->left = ctl->right = vol * 100 / SIO_MAXVOL;
        break;
    case AOCONTROL_SET_VOLUME:
        if (!havevol)
            return CONTROL_FALSE;
        sio_setvol(hdl, ctl->left * SIO_MAXVOL / 100);
        break;
    default:
        return CONTROL_UNKNOWN;
    }
    return CONTROL_OK;
}

/*
 * call-back invoked whenever the the hardware position changes
 */
static void movecb(void *addr, int delta)
{
    delay -= delta * (int)(par.bps * par.pchan);
}

/*
 * call-back invoked whenever the volume changes
 */
static void volcb(void *addr, unsigned newvol)
{
    vol = newvol;
}

/*
 * open device and setup parameters
 * return: 1 = success, 0 = failure
 */
static int init(int rate, int channels, int format, int flags)
{
    int bpf;

    hdl = sio_open(SIO_DEVANY, SIO_PLAY, 0);
    if (hdl == NULL) {
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: can't open sndio\n");
        return 0;
    }
    sio_initpar(&par);
    par.bits = af_fmt2bits(format);
    par.sig = (format & AF_FORMAT_SIGN_MASK) == AF_FORMAT_SI;
    if (par.bits > 8)
        par.le = (format & AF_FORMAT_END_MASK) == AF_FORMAT_LE;
    par.rate = rate;
    par.pchan = channels;
    par.appbufsz = par.rate * 250 / 1000;    /* 250ms buffer */
    par.round = par.rate * 10 / 1000;        /*  10ms block size */
    if (!sio_setpar(hdl, &par)) {
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: couldn't set params\n");
        goto err_out;
    }
    if (!sio_getpar(hdl, &par)) {
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: couldn't get params\n");
        goto err_out;
    }
    if (par.bps != SIO_BPS(par.bits)) {
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: unsupported format\n");
        goto err_out;
    }
    pfds = calloc(sio_nfds(hdl), sizeof(*pfds));
    if (pfds == NULL) {
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: couldn't allocate poll fds\n");
        goto err_out;
    }
    bpf = par.bps * par.pchan;
    ao_data.format = af_bits2fmt(8 * par.bps);
    ao_data.format |= par.sig ? AF_FORMAT_SI : AF_FORMAT_US;
    ao_data.format |= par.le ? AF_FORMAT_LE : AF_FORMAT_BE;
    ao_data.channels = par.pchan;
    ao_data.bps = bpf * par.rate;
    ao_data.buffersize = par.bufsz * bpf;
    ao_data.outburst = par.round * bpf;
    ao_data.samplerate = rate;
    havevol = sio_onvol(hdl, volcb, NULL);
    sio_onmove(hdl, movecb, NULL);

    /*
     * prepare the device to start. It will start as soon there's enough
     * data in the buffer to not underrun
     */
    delay = 0;
    if (!sio_start(hdl)) {
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: init: couldn't start\n");
        goto err_out;
    }
    return 1;
err_out:
    free(pfds);
    pfds = NULL;
    sio_close(hdl);
    hdl = NULL;
    return 0;
}

/*
 * close device
 */
static void uninit(int immed)
{
    if (hdl)
        sio_close(hdl);
    hdl = NULL;
    free(pfds);
    pfds = NULL;
}

/*
 * stop playing and prepare to restart
 */
static void reset(void)
{
    if (!sio_stop(hdl))
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: reset: couldn't stop\n");
    delay = 0;
    if (!sio_start(hdl))
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: reset: couldn't start\n");
}

/*
 * refresh the "delay" counter: call sio_revents() which keeps track of
 * the hardware position
 */
static void refresh(void)
{
    int n = sio_pollfd(hdl, pfds, POLLOUT);
    while (poll(pfds, n, 0) < 0 && errno == EINTR)
        ; /* nothing */
    sio_revents(hdl, pfds);
}

/*
 * return the number of bytes available in the device buffer
 */
static int get_space(void)
{
    refresh();
    return par.bufsz * par.pchan * par.bps - delay;
}

/*
 * delay in seconds between first and last sample in the buffer
 */
static float get_delay(void)
{
    refresh();
    return (float)delay / (par.bps * par.pchan * par.rate);
}

/*
 * submit the given number of bytes to the device
 */
static int play(void *data, int len, int flags)
{
    int n = sio_write(hdl, data, len);
    delay += n;
    return n;
}

/*
 * pause playing
 */
static void audio_pause(void)
{
    /*
     * sndio can't pause, so just stop
     */
    prepause_delay = delay;
    if (!sio_stop(hdl))
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: pause: couldn't stop\n");
    delay = 0;
}

/*
 * resume playing after audio_pause()
 */
static void audio_resume(void)
{
    /*
     * prepare to start; then refill the buffer with the number of bytes
     * audio_pause() consumed (this will trigger start)
     */
    if (!sio_start(hdl))
        mp_msg(MSGT_AO, MSGL_ERR, "ao2: resume: couldn't start\n");
    mp_ao_resume_refill(&audio_out_sndio,
                        par.bufsz * par.pchan * par.bps - prepause_delay);
}