view vidix/sysdep/pci_arm32.c @ 24851:e36efda34616

Our enca code uses strdup() on the input encoding name, as we don't modify it we can use the original constant string. Uses less memory, code is simpler and faster. Fixes memory leak (noticed by ulion).

/*
   This file is based on:
   $XFree86: xc/programs/Xserver/hw/xfree86/etc/scanpci.c,v 3.34.2.17 1998/11/10 11:55:40 dawes Exp $
   Modified for readability by Nick Kurshev
*/

static int pci_config_type( void )
{
  unsigned long tmplong1, tmplong2;
  unsigned char tmp1, tmp2;
  int retval;
    retval = 0;
 
    outb(PCI_MODE2_ENABLE_REG, 0x00);
    outb(PCI_MODE2_FORWARD_REG, 0x00);
    tmp1 = inb(PCI_MODE2_ENABLE_REG);
    tmp2 = inb(PCI_MODE2_FORWARD_REG);
    if ((tmp1 == 0x00) && (tmp2 == 0x00)) {
	retval = 2;
        /*printf("PCI says configuration type 2\n");*/
    } else {
        tmplong1 = inl(PCI_MODE1_ADDRESS_REG);
        outl(PCI_MODE1_ADDRESS_REG, PCI_EN);
        tmplong2 = inl(PCI_MODE1_ADDRESS_REG);
        outl(PCI_MODE1_ADDRESS_REG, tmplong1);
        if (tmplong2 == PCI_EN) {
	    retval = 1;
            /*printf("PCI says configuration type 1\n");*/
	} else {
            /*printf("No PCI !\n");*/
	    disable_os_io();
	    /*exit(1);*/
	    retval = 0xFFFF;
	}
    }
  return retval;
}

static int pci_get_vendor(
          unsigned char bus,
          unsigned char dev,
          int func)
{
    unsigned long config_cmd;
    config_cmd = PCI_EN | (bus<<16) | (dev<<11) | (func<<8);
    outl(PCI_MODE1_ADDRESS_REG, config_cmd);
    return inl(PCI_MODE1_DATA_REG);
}

static long pci_config_read_long(
          unsigned char bus,
          unsigned char dev,
          int func, 
          unsigned cmd)
{
    unsigned long config_cmd;
    config_cmd = PCI_EN | (bus<<16) | (dev<<11) | (func<<8);
    outl(PCI_MODE1_ADDRESS_REG, config_cmd | cmd);
    return inl(PCI_MODE1_DATA_REG);
}