Mercurial > mplayer.hg
view DOCS/tech/mpcf.txt @ 16968:e9d849bf8050
add a switch, slave command, and vo control to toggle borderless window.
includes documentation.
author | joey |
---|---|
date | Thu, 10 Nov 2005 22:25:54 +0000 |
parents | 21fa9b28ca75 |
children | baf593fcf738 |
line wrap: on
line source
======================================== NUT Open Container Format DRAFT 20050909 ======================================== Intro: ====== Features / goals: (supported by the format, not necessarily by a specific implementation) Simple use the same encoding for nearly all fields simple decoding, so slow CPUs (and embedded systems) can handle it Extendible no limit for the possible values of all fields (using universal vlc) allow adding of new headers in the future allow adding more fields at the end of headers Compact ~0.2% overhead, for normal bitrates index is <10kb per hour (1 keyframe every 3sec) a usual header for a file is about 100 bytes (audio + video headers together) a packet header is about ~1-8 bytes Error resistant seeking / playback without an index headers & index can be repeated damaged files can be played back with minimal data loss and fast resync times Definitions: ============ MUST the specific part must be done to conform to this standard SHOULD it is recommended to be done that way, but not strictly required Syntax: ======= Since NUT heavily uses variable length fields, the simplest way to describe it is using a pseudocode approach. Conventions: ============ The data types have a name, used in the bitstream syntax description, a short text description and a pseudocode (functional) definition, optional notes may follow: name (text description) functional definition [Optional notes] The bitstream syntax elements have a tagname and a functional definition, they are presented in a bottom up approach, again optional notes may follow and are reproduced in the tag description: name: (optional note) functional definition [Optional notes] The in-depth tag description follows the bitstream syntax. The functional definition has a C-like syntax. Type definitions: ================= f(n) (n fixed bits in big-endian order) u(n) (unsigned number encoded in n bits in MSB-first order) v (variable length value, unsigned) value=0 do{ more_data u(1) data u(7) value= 128*value + data }while(more_data) s (variable length value, signed) temp v temp++ if(temp&1) value= -(temp>>1) else value= (temp>>1) b (binary data or string, to be use in vb, see below) for(i=0; i<length; i++){ data[i] u(8) } [Note: strings MUST be encoded in UTF-8] vb (variable length binary data or string) length v value b Bitstream syntax: ================= Common elements: ---------------- packet header: forward ptr v align_byte: while(not byte aligned) one f(1) reserved_bytes: for(i=0; i<forward_ptr - length_of_non_reserved; i++) reserved u(8) [a demuxer MUST ignore any reserved bytes a muxer MUST NOT write any reserved bytes, as this would make it impossible to add new fields at the end of packets in the future in a compatible way] Headers: main header: main_startcode f(64) packet header version v stream_count v max_distance v max_index_distance v global_time_base_nom v global_time_base_denom v for(i=0; i<256; ){ tmp_flag v tmp_fields v if(tmp_fields>0) tmp_pts s if(tmp_fields>1) tmp_mul v if(tmp_fields>2) tmp_stream v if(tmp_fields>3) tmp_size v else tmp_size=0 if(tmp_fields>4) tmp_res v else tmp_res=0 if(tmp_fields>5) count v else count= tmp_mul - tmp_size for(j=6; j<tmp_fields; j++){ tmp_reserved[i] v } for(j=0; j<count && i<256; j++, i++){ flags[i]= tmp_flag; stream_id_plus1[i]= tmp_stream; data_size_mul[i]= tmp_mul; data_size_lsb[i]= tmp_size + j; pts_delta[i]= tmp_pts; reserved_count[i]= tmp_res; } } reserved_bytes checksum u(32) stream_header: stream_startcode f(64) packet_header stream_id v stream_class v fourcc vb time_base_nom v time_base_denom v msb_pts_shift v decode_delay v fixed_fps u(1) reserved u(7) codec_specific_data vb video_stream_header: stream_header width v height v sample_width v sample_height v colorspace_type v reserved_bytes checksum u(32) audio_stream_header: stream_header samplerate_nom v samplerate_denom v channel_count v reserved_bytes checksum u(32) other_stream_header: stream_header reserved_bytes checksum u(32) Basic Packets: frame: frame_code f(8) if(stream_id_plus1[frame_code]==0){ stream_id v } if(pts_delta[frame_code]==0){ coded_pts v } if(flags[frame_code]&1){ data_size_msb v } for(i=0; i<reserved_count[frame_code]; i++) reserved v data index: index_startcode f(64) packet header stream_id v max_pts v index_length v for(i=0; i<index_length; i++){ index_pts v index_position v } reserved_bytes checksum u(32) info_frame: (optional) for(;;){ id v if(id==0) break name= info_table[id][0] type= info_table[id][1] if(type==NULL) type vb if(name==NULL) name vb if(type=="v") value v else value vb } reserved_bytes checksum u(32) info_packet: (optional) info_startcode f(64) packet header info_frame sync_point: frame_startcode f(64) global_timestamp v back_ptr v Complete definition: file: file_id_string while(!eof && next_code != index_startcode){ main_header for(i=0; i<stream_count; i++){ if(next_packet==video_stream_header) video_stream_header else if(next_packet==audio_stream_header) audio_stream_header else other_stream_header } while(next_code == info_startcode){ info_packet } while(next_code != main_startcode){ if(next_code == frame_startcode) sync_point frame } } if (next_code == index_startcode){ while(!eof){ index } index_ptr u(64) } Tag description: ---------------- forward_ptr size of the packet data (exactly the distance from the first byte after the forward_ptr to the first byte of the next packet) back_ptr real_back_ptr = back_ptr * 8 + 7 real_back_ptr must point to a position such that a syncpoint startcode begins within the next 8 bytes, and such that at least one keyframe for each stream lies between the syncpoint to which real_back_ptr points, and the current syncpoint. file_id_string "nut/multimedia container\0" *_startcode all startcodes start with 'N' main_startcode 0x7A561F5F04ADULL + (((uint64_t)('N'<<8) + 'M')<<48) stream_starcode 0x11405BF2F9DBULL + (((uint64_t)('N'<<8) + 'S')<<48) frame_startcode 0xE4ADEECA4569ULL + (((uint64_t)('N'<<8) + 'K')<<48) frame_startcodes SHOULD be placed immediately before a keyframe if the previous frame of the same stream was a non-keyframe, unless such non-keyframe - keyframe transitions are very frequent index_startcode 0xDD672F23E64EULL + (((uint64_t)('N'<<8) + 'X')<<48) info_startcode 0xAB68B596BA78ULL + (((uint64_t)('N'<<8) + 'I')<<48) version NUT version. The current value is 2. max_distance max distance of frame_startcodes, the distance may only be larger if there is only a single frame between the two frame_startcodes this can be used by the demuxer to detect damaged frame headers if the damage results in too long of a chain SHOULD be set to <=32768 or at least <=65536 unless there is a very good reason to set it higher, otherwise reasonable error recovery will be impossible max_index_distance max distance of keyframes which are represented in the index, the distance between consecutive entries A and B may only be larger if there are no keyframes within this stream between A and B SHOULD be set to <=32768 or at least <=65536 unless there is a very good reason to set it higher stream_id Stream identifier stream_id MUST be < stream_count stream_class 0 video 1 audio 2 subtiles 3 metadata 4 userdata in metadata streams each frame contains exactly one info frame Note: the remaining values are reserved and MUST NOT be used a demuxer MUST ignore streams with reserved classes fourcc identification for the codec example: "H264" MUST contain 2 or 4 bytes, note, this might be increased in the future if needed time_base_nom / time_base_denom = time_base the length of a timer tick in seconds, this MUST be equal to the 1/fps if fixed_fps is 1 time_base_nom and time_base_denom MUST NOT be 0 time_base_nom and time_base_denom MUST be relatively prime time_base_denom MUST be < 2^31 examples: fps time_base_nom time_base_denom 30 1 30 29.97 1001 30000 23.976 1001 24000 global_time_base_nom / global_time_base_denom = global_time_base the length of a timer tick in seconds global_time_base_nom and global_time_base_denom MUST NOT be 0 global_time_base_nom and global_time_base_denom MUST be relatively prime global_time_base_denom MUST be < 2^31 global_timestamp timestamp in global_time_base units when a global_timestamp is encountered the last_pts of all streams is set to the following: ln = global_time_base_nom*time_base_denom sn = global_timestamp d1 = global_time_base_denom d2 = time_base_nom last_pts = (ln/d1*sn + ln%d1*sn/d1)/d2 Note: this calculation MUST be done with unsigned 64 bit integers, and is equivalent to (ln*sn)/(d1*d2) but this would require a 96bit integer msb_pts_shift amount of bits in lsb_pts MUST be <16 decode_delay maximum time between input and output for a codec, used to generate dts from pts is set to 0 for streams without B-frames, and set to 1 for streams with B-frames, may be larger for future codecs fixed_fps 1 indicates that the fps is fixed codec_specific_data private global data for a codec (could be huffman tables or ...) frame_code the meaning of this byte is stored in the main header the value 78 ('N') is forbidden to ensure that the byte is always different from the first byte of any startcode flags[frame_code] first of the flags from MSB to LSB are called KD if D is 1 then data_size_msb is coded, otherwise data_size_msb is 0 K is the keyframe_type 0 -> no keyframe, 1 -> keyframe, flags=4 can be used to mark illegal frame_code bytes frame_code=78 must have flags=4 Note: frames MUST NOT depend(1) upon frames prior to the last frame_startcode Important: depend(1) means dependency on the container level (NUT) not dependency on the codec level stream_id_plus1[frame_code] must be <250 if it is 0, then the stream_id is coded in the frame data_size_mul[frame_code] must be <16384 data_size_lsb[frame_code] must be <16384 pts_delta[frame_code] must be <16384 and >-16384 data_size data_size= data_size_lsb + data_size_msb*data_size_mul; coded_pts if coded_pts < (1<<msb_pts_shift) then it is an lsb pts, otherwise it is a full pts + (1<<msb_pts_shift) lsb pts is converted to a full pts by: mask = (1<<msb_pts_shift)-1; delta = last_pts - mask/2 pts = ((pts_lsb-delta)&mask) + delta lsb_pts least significant bits of the pts in time_base precision Example: IBBP display order keyframe pts=0 -> pts=0 frame lsb_pts=3 -> pts=3 frame lsb_pts=1 -> pts=1 frame lsb_pts=2 -> pts=2 ... keyframe msb_pts=257 -> pts=257 frame lsb_pts=255 -> pts=255 frame lsb_pts=0 -> pts=256 frame lsb_pts=4 -> pts=260 frame lsb_pts=2 -> pts=258 frame lsb_pts=3 -> pts=259 all pts's of keyframes of a single stream MUST be monotone dts dts is calculated by using a decode_delay+1 sized buffer for each stream, into which the current pts is inserted and the element with the smallest value is removed, this is then the current dts this buffer is initalized with decode_delay -1 elements all frames must be monotone, that means a frame which occurs later in the stream must have a larger or equal dts than an earlier frame width/height MUST be set to the coded width/height sample_width/sample_height (aspect ratio) sample_width is the horizontal distance between samples sample_width and sample_height MUST be relatively prime if not zero MUST be 0 if unknown colorspace_type 0 unknown 1 ITU Rec 624 / ITU Rec 601 Y range: 16..235 Cb/Cr range: 16..240 2 ITU Rec 709 Y range: 16..235 Cb/Cr range: 16..240 17 ITU Rec 624 / ITU Rec 601 Y range: 0..255 Cb/Cr range: 0..255 18 ITU Rec 709 Y range: 0..255 Cb/Cr range: 0..255 samplerate_nom / samplerate_denom = samplerate the number of samples per second checksum adler32 checksum checksum is calculated for the area pointed to by forward_ptr not including the checksum itself (from first byte after the forward_ptr until last byte before the checksum). max_pts The highest pts in the stream. index_pts value of the pts of a keyframe relative to the last keyframe stored in this index index_position position in bytes of the first byte of a keyframe, relative to the last keyframe stored in this index there MUST be no keyframe with the same stream_id as this index between two consecutive index entries if they are more than max_index_distance apart index_ptr Length in bytes from the first byte of the first index startcode to the first byte of the index_ptr. If there is no index, index_ptr MUST NOT be written. id the ID of the type/name pair, so it is more compact 0 means end type for example: "UTF8" -> string or "JPEG" -> JPEG image Note: nonstandard fields should be prefixed by "X-" Note: MUST be less than 6 byte long (might be increased to 64 later) info packet types the name of the info entry, valid names are "StreamId" the stream(s) to which the info packet applies "Author" "Description" "Copyright" "Encoder" the name & version of the software used for encoding "Title" "Cover" image of the (CD, DVD, VHS, ..) cover (preferably PNG or JPEG) "Source" "DVD", "VCD", "CD", "MD", "FM radio", "VHS", "TV", "LD" Optional: appended PAL, NTSC, SECAM, ... in parentheses "CaptureDevice" "BT878", "BT848", "webcam", ... (more exact names are fine too) "CreationTime" "2003-01-20 20:13:15Z", ... (ISO 8601 format, see http://www.cl.cam.ac.uk/~mgk25/iso-time.html) Note: do not forget the timezone "Keywords" "TotalTime" total length of the stream in msecs "Language" ISO 639 and ISO 3166 for language/country code something like "eng" (US english), can be 0 if unknown and "multi" if several languages see http://www.loc.gov/standards/iso639-2/englangn.html and http://www.din.de/gremien/nas/nabd/iso3166ma/codlstp1/en_listp1.html the language code "Disposition" "original", "dub" (translated), "comment", "lyrics", "karaoke" Note: if someone needs some others, please tell us about them, so we can add them to the official standard (if they are sane) Note: nonstandard fields should be prefixed by "X-" Note: MUST be less than 64 bytes long value value of this name/type pair stuffing 0x80 can be placed in front of any type v entry for stuffing purposes info_table[][2]={ {NULL , NULL }, // end {NULL , NULL }, {NULL , "UTF8"}, {NULL , "v"}, {NULL , "s"}, {"StreamId" , "v"}, {"Author" , "UTF8"}, {"Titel" , "UTF8"}, {"Language" , "UTF8"}, {"Description" , "UTF8"}, {"Copyright" , "UTF8"}, {"Encoder" , "UTF8"}, {"Keyword" , "UTF8"}, {"Cover" , "JPEG"}, {"Cover" , "PNG"}, {"Disposition" , "UTF8"}, }; Structure: ---------- the headers MUST be in exactly the following order (to simplify demuxer design) main header stream_header (id=0) stream_header (id=1) ... stream_header (id=n) headers may be repeated, but if they are, then they MUST all be repeated together and repeated headers MUST be identical headers MAY only repeat at the closest possible positions after 2^x where x is an integer and the file end, so the headers may be repeated at 4102 if that is the closest position after 2^12=4096 at which the headers can be placed headers MUST be placed at least at the start of the file and immediately before the index or at the file end if there is no index headers MUST be repeated at least twice (so they exist three times in a file) there MUST be a sync point immediately before the first frame after any headers Index: ------ Note: with realtime streaming, there is no end, so no index there either An index SHOULD be written for every stream. Indices MUST be placed at end of file. Indices MAY be repeated for a stream. Info frames: ------------ Info frames can be used to describe the file or some part of it (chapters) Unknown packets: ---------------- MUST be ignored by the demuxer demuxer (non-normative): ------------------------ in the absence of a valid header at the beginning, players SHOULD search for backup headers starting at offset 2^x; for each x players SHOULD end their search at a particular offset when any startcode is found (including syncpoint) Semantic requirements: ====================== If more than one stream of a given stream class is present, each one MUST have info tags specifying disposition, and if applicable, language. A demuxer MUST NOT demux a stream which contains more than one stream, or which is wrapped in a structure to facilitate more than one stream or otherwise duplicate the role of a container. any such file is to be considered invalid. Sample code (Public Domain, & untested): ======================================== typedef BufferContext{ uint8_t *buf; uint8_t *buf_ptr; }BufferContext; static inline uint64_t get_bytes(BufferContext *bc, int count){ uint64_t val=0; assert(count>0 && count<9); for(i=0; i<count; i++){ val <<=8; val += *(bc->buf_ptr++); } return val; } static inline void put_bytes(BufferContext *bc, int count, uint64_t val){ uint64_t val=0; assert(count>0 && count<9); for(i=count-1; i>=0; i--){ *(bc->buf_ptr++)= val >> (8*i); } return val; } static inline uint64_t get_v(BufferContext *bc){ uint64_t val= 0; for(; space_left(bc) > 0; ){ int tmp= *(bc->buf_ptr++); if(tmp&0x80) val= (val<<7) + tmp - 0x80; else return (val<<7) + tmp; } return -1; } static inline int put_v(BufferContext *bc, uint64_t val){ int i; if(space_left(bc) < 9) return -1; val &= 0x7FFFFFFFFFFFFFFFULL; // FIXME can only encode upto 63 bits currently for(i=7; ; i+=7){ if(val>>i == 0) break; } for(i-=7; i>0; i-=7){ *(bc->buf_ptr++)= 0x80 | (val>>i); } *(bc->buf_ptr++)= val&0x7F; return 0; } static int64_t get_dts(int64_t pts, int64_t *pts_cache, int delay, int reset){ if(reset) memset(pts_cache, -1, delay*sizeof(int64_t)); while(delay--){ int64_t t= pts_cache[delay]; if(t < pts){ pts_cache[delay]= pts; pts= t; } } return pts; } Authors: ======== Folks from the MPlayer developers mailing list (http://www.mplayerhq.hu/). Authors in alphabetical order: (FIXME! Tell us if we left you out) Beregszaszi, Alex (alex@fsn.hu) Bunkus, Moritz (moritz@bunkus.org) Diedrich, Tobias (ranma+mplayer@tdiedrich.de) Felker, Rich (dalias@aerifal.cx) Franz, Fabian (FabianFranz@gmx.de) Gereoffy, Arpad (arpi@thot.banki.hu) Hess, Andreas (jaska@gmx.net) Niedermayer, Michael (michaelni@gmx.at) Shimon, Oded (ods15@ods15.dyndns.org)